summaryrefslogtreecommitdiffstats
path: root/drivers/watchdog/w83627hf_wdt.c
diff options
context:
space:
mode:
authorGuenter Roeck <linux@roeck-us.net>2013-08-17 13:58:40 -0700
committerWim Van Sebroeck <wim@iguana.be>2013-11-18 21:34:08 +0100
commit8f526389599fc543b204c12a36de8345eb298085 (patch)
tree9a95ff30277a2afc4382dd49d103ee55d08132ac /drivers/watchdog/w83627hf_wdt.c
parent30a83695aa2ed3ffb1445d6daef1e620c3ca4e6d (diff)
downloadblackbird-op-linux-8f526389599fc543b204c12a36de8345eb298085.tar.gz
blackbird-op-linux-8f526389599fc543b204c12a36de8345eb298085.zip
watchdog: w83627hf: Enable watchdog only once
It is unnecessary to enable the logical device and WDT0 each time the watchdog is accessed. Do it only once during initialization. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Diffstat (limited to 'drivers/watchdog/w83627hf_wdt.c')
-rw-r--r--drivers/watchdog/w83627hf_wdt.c35
1 files changed, 17 insertions, 18 deletions
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index ab5ec6d84b16..910d43736821 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -72,28 +72,10 @@ MODULE_PARM_DESC(nowayout,
static void w83627hf_select_wd_register(void)
{
- unsigned char c;
outb_p(0x87, WDT_EFER); /* Enter extended function mode */
outb_p(0x87, WDT_EFER); /* Again according to manual */
-
- outb(0x20, WDT_EFER); /* check chip version */
- c = inb(WDT_EFDR);
- if (c == 0x82) { /* W83627THF */
- outb_p(0x2b, WDT_EFER); /* select GPIO3 */
- c = ((inb_p(WDT_EFDR) & 0xf7) | 0x04); /* select WDT0 */
- outb_p(0x2b, WDT_EFER);
- outb_p(c, WDT_EFDR); /* set GPIO3 to WDT0 */
- } else if (c == 0x88 || c == 0xa0) { /* W83627EHF / W83627DHG */
- outb_p(0x2d, WDT_EFER); /* select GPIO5 */
- c = inb_p(WDT_EFDR) & ~0x01; /* PIN77 -> WDT0# */
- outb_p(0x2d, WDT_EFER);
- outb_p(c, WDT_EFDR); /* set GPIO5 to WDT0 */
- }
-
outb_p(0x07, WDT_EFER); /* point to logical device number reg */
outb_p(0x08, WDT_EFDR); /* select logical device 8 (GPIO2) */
- outb_p(0x30, WDT_EFER); /* select CR30 */
- outb_p(0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */
}
static void w83627hf_unselect_wd_register(void)
@@ -110,6 +92,23 @@ static void w83627hf_init(struct watchdog_device *wdog)
w83627hf_select_wd_register();
+ outb(0x20, WDT_EFER); /* check chip version */
+ t = inb(WDT_EFDR);
+ if (t == 0x82) { /* W83627THF */
+ outb_p(0x2b, WDT_EFER); /* select GPIO3 */
+ t = ((inb_p(WDT_EFDR) & 0xf7) | 0x04); /* select WDT0 */
+ outb_p(0x2b, WDT_EFER);
+ outb_p(t, WDT_EFDR); /* set GPIO3 to WDT0 */
+ } else if (t == 0x88 || t == 0xa0) { /* W83627EHF / W83627DHG */
+ outb_p(0x2d, WDT_EFER); /* select GPIO5 */
+ t = inb_p(WDT_EFDR) & ~0x01; /* PIN77 -> WDT0# */
+ outb_p(0x2d, WDT_EFER);
+ outb_p(t, WDT_EFDR); /* set GPIO5 to WDT0 */
+ }
+
+ outb_p(0x30, WDT_EFER); /* select CR30 */
+ outb_p(0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */
+
outb_p(0xF6, WDT_EFER); /* Select CRF6 */
t = inb_p(WDT_EFDR); /* read CRF6 */
if (t != 0) {
OpenPOWER on IntegriCloud