summaryrefslogtreecommitdiffstats
path: root/drivers/video
diff options
context:
space:
mode:
authorMichael Hennerich <michael.hennerich@analog.com>2010-05-24 14:33:52 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2010-05-25 08:07:08 -0700
commitfbd65e0ecdeffe5e50ad850fb7240888b1af6b22 (patch)
treef7122e2264f303bed183f7cbe13f74f805bb5e4b /drivers/video
parent5815e5d36eff44b3dd38943f3a98a4d9ce985118 (diff)
downloadblackbird-op-linux-fbd65e0ecdeffe5e50ad850fb7240888b1af6b22.tar.gz
blackbird-op-linux-fbd65e0ecdeffe5e50ad850fb7240888b1af6b22.zip
fbdev: bfin-lq035q1-fb: respect new PPI mode platform field
This lets us support the new BF527-EZKIT V2.1 via platform resources tweaks only. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/video')
-rw-r--r--drivers/video/bfin-lq035q1-fb.c252
1 files changed, 146 insertions, 106 deletions
diff --git a/drivers/video/bfin-lq035q1-fb.c b/drivers/video/bfin-lq035q1-fb.c
index 2baac7cc1425..c8e1f04941bd 100644
--- a/drivers/video/bfin-lq035q1-fb.c
+++ b/drivers/video/bfin-lq035q1-fb.c
@@ -61,47 +61,13 @@
#define LCD_X_RES 320 /* Horizontal Resolution */
#define LCD_Y_RES 240 /* Vertical Resolution */
#define DMA_BUS_SIZE 16
+#define U_LINE 4 /* Blanking Lines */
-#define USE_RGB565_16_BIT_PPI
-
-#ifdef USE_RGB565_16_BIT_PPI
-#define LCD_BPP 16 /* Bit Per Pixel */
-#define CLOCKS_PER_PIX 1
-#define CPLD_PIPELINE_DELAY_COR 0 /* NO CPLB */
-#endif
/* Interface 16/18-bit TFT over an 8-bit wide PPI using a small Programmable Logic Device (CPLD)
* http://blackfin.uclinux.org/gf/project/stamp/frs/?action=FrsReleaseBrowse&frs_package_id=165
*/
-#ifdef USE_RGB565_8_BIT_PPI
-#define LCD_BPP 16 /* Bit Per Pixel */
-#define CLOCKS_PER_PIX 2
-#define CPLD_PIPELINE_DELAY_COR 3 /* RGB565 */
-#endif
-
-#ifdef USE_RGB888_8_BIT_PPI
-#define LCD_BPP 24 /* Bit Per Pixel */
-#define CLOCKS_PER_PIX 3
-#define CPLD_PIPELINE_DELAY_COR 5 /* RGB888 */
-#endif
-
- /*
- * HS and VS timing parameters (all in number of PPI clk ticks)
- */
-
-#define U_LINE 4 /* Blanking Lines */
-
-#define H_ACTPIX (LCD_X_RES * CLOCKS_PER_PIX) /* active horizontal pixel */
-#define H_PERIOD (336 * CLOCKS_PER_PIX) /* HS period */
-#define H_PULSE (2 * CLOCKS_PER_PIX) /* HS pulse width */
-#define H_START (7 * CLOCKS_PER_PIX + CPLD_PIPELINE_DELAY_COR) /* first valid pixel */
-
-#define V_LINES (LCD_Y_RES + U_LINE) /* total vertical lines */
-#define V_PULSE (2 * CLOCKS_PER_PIX) /* VS pulse width (1-5 H_PERIODs) */
-#define V_PERIOD (H_PERIOD * V_LINES) /* VS period */
-
-#define ACTIVE_VIDEO_MEM_OFFSET ((U_LINE / 2) * LCD_X_RES * (LCD_BPP / 8))
#define BFIN_LCD_NBR_PALETTE_ENTRIES 256
@@ -110,12 +76,6 @@
#define PPI_PORT_CFG_01 0x10
#define PPI_POLS_1 0x8000
-#if (CLOCKS_PER_PIX > 1)
-#define PPI_PMODE (DLEN_8 | PACK_EN)
-#else
-#define PPI_PMODE (DLEN_16)
-#endif
-
#define LQ035_INDEX 0x74
#define LQ035_DATA 0x76
@@ -139,6 +99,15 @@ struct bfin_lq035q1fb_info {
int irq;
spinlock_t lock; /* lock */
u32 pseudo_pal[16];
+
+ u32 lcd_bpp;
+ u32 h_actpix;
+ u32 h_period;
+ u32 h_pulse;
+ u32 h_start;
+ u32 v_lines;
+ u32 v_pulse;
+ u32 v_period;
};
static int nocursor;
@@ -234,16 +203,69 @@ static int lq035q1_backlight(struct bfin_lq035q1fb_info *info, unsigned arg)
return 0;
}
+static int bfin_lq035q1_calc_timing(struct bfin_lq035q1fb_info *fbi)
+{
+ unsigned long clocks_per_pix, cpld_pipeline_delay_cor;
+
+ /*
+ * Interface 16/18-bit TFT over an 8-bit wide PPI using a small
+ * Programmable Logic Device (CPLD)
+ * http://blackfin.uclinux.org/gf/project/stamp/frs/?action=FrsReleaseBrowse&frs_package_id=165
+ */
+
+ switch (fbi->disp_info->ppi_mode) {
+ case USE_RGB565_16_BIT_PPI:
+ fbi->lcd_bpp = 16;
+ clocks_per_pix = 1;
+ cpld_pipeline_delay_cor = 0;
+ break;
+ case USE_RGB565_8_BIT_PPI:
+ fbi->lcd_bpp = 16;
+ clocks_per_pix = 2;
+ cpld_pipeline_delay_cor = 3;
+ break;
+ case USE_RGB888_8_BIT_PPI:
+ fbi->lcd_bpp = 24;
+ clocks_per_pix = 3;
+ cpld_pipeline_delay_cor = 5;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /*
+ * HS and VS timing parameters (all in number of PPI clk ticks)
+ */
+
+ fbi->h_actpix = (LCD_X_RES * clocks_per_pix); /* active horizontal pixel */
+ fbi->h_period = (336 * clocks_per_pix); /* HS period */
+ fbi->h_pulse = (2 * clocks_per_pix); /* HS pulse width */
+ fbi->h_start = (7 * clocks_per_pix + cpld_pipeline_delay_cor); /* first valid pixel */
+
+ fbi->v_lines = (LCD_Y_RES + U_LINE); /* total vertical lines */
+ fbi->v_pulse = (2 * clocks_per_pix); /* VS pulse width (1-5 H_PERIODs) */
+ fbi->v_period = (fbi->h_period * fbi->v_lines); /* VS period */
+
+ return 0;
+}
+
static void bfin_lq035q1_config_ppi(struct bfin_lq035q1fb_info *fbi)
{
- bfin_write_PPI_DELAY(H_START);
- bfin_write_PPI_COUNT(H_ACTPIX - 1);
- bfin_write_PPI_FRAME(V_LINES);
+ unsigned ppi_pmode;
+
+ if (fbi->disp_info->ppi_mode == USE_RGB565_16_BIT_PPI)
+ ppi_pmode = DLEN_16;
+ else
+ ppi_pmode = (DLEN_8 | PACK_EN);
+
+ bfin_write_PPI_DELAY(fbi->h_start);
+ bfin_write_PPI_COUNT(fbi->h_actpix - 1);
+ bfin_write_PPI_FRAME(fbi->v_lines);
bfin_write_PPI_CONTROL(PPI_TX_MODE | /* output mode , PORT_DIR */
PPI_XFER_TYPE_11 | /* sync mode XFR_TYPE */
PPI_PORT_CFG_01 | /* two frame sync PORT_CFG */
- PPI_PMODE | /* 8/16 bit data length / PACK_EN? */
+ ppi_pmode | /* 8/16 bit data length / PACK_EN? */
PPI_POLS_1); /* faling edge syncs POLS */
}
@@ -272,19 +294,19 @@ static void bfin_lq035q1_stop_timers(void)
}
-static void bfin_lq035q1_init_timers(void)
+static void bfin_lq035q1_init_timers(struct bfin_lq035q1fb_info *fbi)
{
bfin_lq035q1_stop_timers();
- set_gptimer_period(TIMER_HSYNC_id, H_PERIOD);
- set_gptimer_pwidth(TIMER_HSYNC_id, H_PULSE);
+ set_gptimer_period(TIMER_HSYNC_id, fbi->h_period);
+ set_gptimer_pwidth(TIMER_HSYNC_id, fbi->h_pulse);
set_gptimer_config(TIMER_HSYNC_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT |
TIMER_TIN_SEL | TIMER_CLK_SEL|
TIMER_EMU_RUN);
- set_gptimer_period(TIMER_VSYNC_id, V_PERIOD);
- set_gptimer_pwidth(TIMER_VSYNC_id, V_PULSE);
+ set_gptimer_period(TIMER_VSYNC_id, fbi->v_period);
+ set_gptimer_pwidth(TIMER_VSYNC_id, fbi->v_pulse);
set_gptimer_config(TIMER_VSYNC_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT |
TIMER_TIN_SEL | TIMER_CLK_SEL |
TIMER_EMU_RUN);
@@ -294,21 +316,21 @@ static void bfin_lq035q1_init_timers(void)
static void bfin_lq035q1_config_dma(struct bfin_lq035q1fb_info *fbi)
{
+
set_dma_config(CH_PPI,
set_bfin_dma_config(DIR_READ, DMA_FLOW_AUTO,
INTR_DISABLE, DIMENSION_2D,
DATA_SIZE_16,
DMA_NOSYNC_KEEP_DMA_BUF));
- set_dma_x_count(CH_PPI, (LCD_X_RES * LCD_BPP) / DMA_BUS_SIZE);
+ set_dma_x_count(CH_PPI, (LCD_X_RES * fbi->lcd_bpp) / DMA_BUS_SIZE);
set_dma_x_modify(CH_PPI, DMA_BUS_SIZE / 8);
- set_dma_y_count(CH_PPI, V_LINES);
+ set_dma_y_count(CH_PPI, fbi->v_lines);
set_dma_y_modify(CH_PPI, DMA_BUS_SIZE / 8);
set_dma_start_addr(CH_PPI, (unsigned long)fbi->fb_buffer);
}
-#if (CLOCKS_PER_PIX == 1)
static const u16 ppi0_req_16[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
P_PPI0_D0, P_PPI0_D1, P_PPI0_D2,
P_PPI0_D3, P_PPI0_D4, P_PPI0_D5,
@@ -316,22 +338,27 @@ static const u16 ppi0_req_16[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
P_PPI0_D12, P_PPI0_D13, P_PPI0_D14,
P_PPI0_D15, 0};
-#else
-static const u16 ppi0_req_16[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+
+static const u16 ppi0_req_8[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
P_PPI0_D0, P_PPI0_D1, P_PPI0_D2,
P_PPI0_D3, P_PPI0_D4, P_PPI0_D5,
P_PPI0_D6, P_PPI0_D7, 0};
-#endif
-static inline void bfin_lq035q1_free_ports(void)
+static inline void bfin_lq035q1_free_ports(unsigned ppi16)
{
- peripheral_free_list(ppi0_req_16);
+ if (ppi16)
+ peripheral_free_list(ppi0_req_16);
+ else
+ peripheral_free_list(ppi0_req_8);
+
if (ANOMALY_05000400)
gpio_free(P_IDENT(P_PPI0_FS3));
}
-static int __devinit bfin_lq035q1_request_ports(struct platform_device *pdev)
+static int __devinit bfin_lq035q1_request_ports(struct platform_device *pdev,
+ unsigned ppi16)
{
+ int ret;
/* ANOMALY_05000400 - PPI Does Not Start Properly In Specific Mode:
* Drive PPI_FS3 Low
*/
@@ -342,7 +369,12 @@ static int __devinit bfin_lq035q1_request_ports(struct platform_device *pdev)
gpio_direction_output(P_IDENT(P_PPI0_FS3), 0);
}
- if (peripheral_request_list(ppi0_req_16, DRIVER_NAME)) {
+ if (ppi16)
+ ret = peripheral_request_list(ppi0_req_16, DRIVER_NAME);
+ else
+ ret = peripheral_request_list(ppi0_req_8, DRIVER_NAME);
+
+ if (ret) {
dev_err(&pdev->dev, "requesting peripherals failed\n");
return -EFAULT;
}
@@ -364,7 +396,7 @@ static int bfin_lq035q1_fb_open(struct fb_info *info, int user)
bfin_lq035q1_config_dma(fbi);
bfin_lq035q1_config_ppi(fbi);
- bfin_lq035q1_init_timers();
+ bfin_lq035q1_init_timers(fbi);
/* start dma */
enable_dma(CH_PPI);
@@ -402,12 +434,9 @@ static int bfin_lq035q1_fb_release(struct fb_info *info, int user)
static int bfin_lq035q1_fb_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
- switch (var->bits_per_pixel) {
-#if (LCD_BPP == 24)
- case 24:/* TRUECOLOUR, 16m */
-#else
- case 16:/* DIRECTCOLOUR, 64k */
-#endif
+ struct bfin_lq035q1fb_info *fbi = info->par;
+
+ if (var->bits_per_pixel == fbi->lcd_bpp) {
var->red.offset = info->var.red.offset;
var->green.offset = info->var.green.offset;
var->blue.offset = info->var.blue.offset;
@@ -420,8 +449,7 @@ static int bfin_lq035q1_fb_check_var(struct fb_var_screeninfo *var,
var->red.msb_right = 0;
var->green.msb_right = 0;
var->blue.msb_right = 0;
- break;
- default:
+ } else {
pr_debug("%s: depth not supported: %u BPP\n", __func__,
var->bits_per_pixel);
return -EINVAL;
@@ -528,6 +556,7 @@ static int __devinit bfin_lq035q1_probe(struct platform_device *pdev)
{
struct bfin_lq035q1fb_info *info;
struct fb_info *fbinfo;
+ u32 active_video_mem_offset;
int ret;
ret = request_dma(CH_PPI, DRIVER_NAME"_CH_PPI");
@@ -550,6 +579,12 @@ static int __devinit bfin_lq035q1_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, fbinfo);
+ ret = bfin_lq035q1_calc_timing(info);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed PPI Mode\n");
+ goto out3;
+ }
+
strcpy(fbinfo->fix.id, DRIVER_NAME);
fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
@@ -571,46 +606,48 @@ static int __devinit bfin_lq035q1_probe(struct platform_device *pdev)
fbinfo->var.xres_virtual = LCD_X_RES;
fbinfo->var.yres = LCD_Y_RES;
fbinfo->var.yres_virtual = LCD_Y_RES;
- fbinfo->var.bits_per_pixel = LCD_BPP;
+ fbinfo->var.bits_per_pixel = info->lcd_bpp;
if (info->disp_info->mode & LQ035_BGR) {
-#if (LCD_BPP == 24)
- fbinfo->var.red.offset = 0;
- fbinfo->var.green.offset = 8;
- fbinfo->var.blue.offset = 16;
-#else
- fbinfo->var.red.offset = 0;
- fbinfo->var.green.offset = 5;
- fbinfo->var.blue.offset = 11;
-#endif
+ if (info->lcd_bpp == 24) {
+ fbinfo->var.red.offset = 0;
+ fbinfo->var.green.offset = 8;
+ fbinfo->var.blue.offset = 16;
+ } else {
+ fbinfo->var.red.offset = 0;
+ fbinfo->var.green.offset = 5;
+ fbinfo->var.blue.offset = 11;
+ }
} else {
-#if (LCD_BPP == 24)
- fbinfo->var.red.offset = 16;
- fbinfo->var.green.offset = 8;
- fbinfo->var.blue.offset = 0;
-#else
- fbinfo->var.red.offset = 11;
- fbinfo->var.green.offset = 5;
- fbinfo->var.blue.offset = 0;
-#endif
+ if (info->lcd_bpp == 24) {
+ fbinfo->var.red.offset = 16;
+ fbinfo->var.green.offset = 8;
+ fbinfo->var.blue.offset = 0;
+ } else {
+ fbinfo->var.red.offset = 11;
+ fbinfo->var.green.offset = 5;
+ fbinfo->var.blue.offset = 0;
+ }
}
fbinfo->var.transp.offset = 0;
-#if (LCD_BPP == 24)
- fbinfo->var.red.length = 8;
- fbinfo->var.green.length = 8;
- fbinfo->var.blue.length = 8;
-#else
- fbinfo->var.red.length = 5;
- fbinfo->var.green.length = 6;
- fbinfo->var.blue.length = 5;
-#endif
+ if (info->lcd_bpp == 24) {
+ fbinfo->var.red.length = 8;
+ fbinfo->var.green.length = 8;
+ fbinfo->var.blue.length = 8;
+ } else {
+ fbinfo->var.red.length = 5;
+ fbinfo->var.green.length = 6;
+ fbinfo->var.blue.length = 5;
+ }
fbinfo->var.transp.length = 0;
- fbinfo->fix.smem_len = LCD_X_RES * LCD_Y_RES * LCD_BPP / 8
- + ACTIVE_VIDEO_MEM_OFFSET;
+ active_video_mem_offset = ((U_LINE / 2) * LCD_X_RES * (info->lcd_bpp / 8));
+
+ fbinfo->fix.smem_len = LCD_X_RES * LCD_Y_RES * info->lcd_bpp / 8
+ + active_video_mem_offset;
fbinfo->fix.line_length = fbinfo->var.xres_virtual *
fbinfo->var.bits_per_pixel / 8;
@@ -629,8 +666,8 @@ static int __devinit bfin_lq035q1_probe(struct platform_device *pdev)
goto out3;
}
- fbinfo->screen_base = (void *)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET;
- fbinfo->fix.smem_start = (int)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET;
+ fbinfo->screen_base = (void *)info->fb_buffer + active_video_mem_offset;
+ fbinfo->fix.smem_start = (int)info->fb_buffer + active_video_mem_offset;
fbinfo->fbops = &bfin_lq035q1_fb_ops;
@@ -643,7 +680,8 @@ static int __devinit bfin_lq035q1_probe(struct platform_device *pdev)
goto out4;
}
- ret = bfin_lq035q1_request_ports(pdev);
+ ret = bfin_lq035q1_request_ports(pdev,
+ info->disp_info->ppi_mode == USE_RGB565_16_BIT_PPI);
if (ret) {
dev_err(&pdev->dev, "couldn't request gpio port\n");
goto out6;
@@ -693,7 +731,7 @@ static int __devinit bfin_lq035q1_probe(struct platform_device *pdev)
}
dev_info(&pdev->dev, "%dx%d %d-bit RGB FrameBuffer initialized\n",
- LCD_X_RES, LCD_Y_RES, LCD_BPP);
+ LCD_X_RES, LCD_Y_RES, info->lcd_bpp);
return 0;
@@ -705,7 +743,8 @@ static int __devinit bfin_lq035q1_probe(struct platform_device *pdev)
out8:
free_irq(info->irq, info);
out7:
- bfin_lq035q1_free_ports();
+ bfin_lq035q1_free_ports(info->disp_info->ppi_mode ==
+ USE_RGB565_16_BIT_PPI);
out6:
fb_dealloc_cmap(&fbinfo->cmap);
out4:
@@ -742,7 +781,8 @@ static int __devexit bfin_lq035q1_remove(struct platform_device *pdev)
fb_dealloc_cmap(&fbinfo->cmap);
- bfin_lq035q1_free_ports();
+ bfin_lq035q1_free_ports(info->disp_info->ppi_mode ==
+ USE_RGB565_16_BIT_PPI);
platform_set_drvdata(pdev, NULL);
framebuffer_release(fbinfo);
@@ -781,7 +821,7 @@ static int bfin_lq035q1_resume(struct device *dev)
bfin_lq035q1_config_dma(info);
bfin_lq035q1_config_ppi(info);
- bfin_lq035q1_init_timers();
+ bfin_lq035q1_init_timers(info);
/* start dma */
enable_dma(CH_PPI);
OpenPOWER on IntegriCloud