summaryrefslogtreecommitdiffstats
path: root/drivers/video
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2008-12-16 11:44:07 +0100
committerSascha Hauer <s.hauer@pengutronix.de>2008-12-16 15:40:18 +0100
commit74b114fe2cfff9986b2469b3eb0035ca3d325d00 (patch)
tree35545b7d4a45917d7d88c736483aac17fd5b79e5 /drivers/video
parent60e8c5ab0b09e85de62008f508d8ddfa72c15c1b (diff)
downloadblackbird-op-linux-74b114fe2cfff9986b2469b3eb0035ca3d325d00.tar.gz
blackbird-op-linux-74b114fe2cfff9986b2469b3eb0035ca3d325d00.zip
i.MX Framebuffer: remove gpio setup function
Remove the gpio mux setup function from i.MX framebuffer driver. This function is platform specific and thus should be done by the board setup. As there are currently no in-kernel users of this driver we do not break anything. Acked-by: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'drivers/video')
-rw-r--r--drivers/video/imxfb.c53
1 files changed, 0 insertions, 53 deletions
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index ccd986140c95..a990d432f524 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -357,57 +357,6 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
return 0;
}
-static void imxfb_setup_gpio(struct imxfb_info *fbi)
-{
- int width;
-
- LCDC_RMCR &= ~(RMCR_LCDC_EN | RMCR_SELF_REF);
-
- if( fbi->pcr & PCR_TFT )
- width = 16;
- else
- width = 1 << ((fbi->pcr >> 28) & 0x3);
-
- switch(width) {
- case 16:
- imx_gpio_mode(PD30_PF_LD15);
- imx_gpio_mode(PD29_PF_LD14);
- imx_gpio_mode(PD28_PF_LD13);
- imx_gpio_mode(PD27_PF_LD12);
- imx_gpio_mode(PD26_PF_LD11);
- imx_gpio_mode(PD25_PF_LD10);
- imx_gpio_mode(PD24_PF_LD9);
- imx_gpio_mode(PD23_PF_LD8);
- case 8:
- imx_gpio_mode(PD22_PF_LD7);
- imx_gpio_mode(PD21_PF_LD6);
- imx_gpio_mode(PD20_PF_LD5);
- imx_gpio_mode(PD19_PF_LD4);
- case 4:
- imx_gpio_mode(PD18_PF_LD3);
- imx_gpio_mode(PD17_PF_LD2);
- case 2:
- imx_gpio_mode(PD16_PF_LD1);
- case 1:
- imx_gpio_mode(PD15_PF_LD0);
- }
-
- /* initialize GPIOs */
- imx_gpio_mode(PD6_PF_LSCLK);
- imx_gpio_mode(PD11_PF_CONTRAST);
- imx_gpio_mode(PD14_PF_FLM_VSYNC);
- imx_gpio_mode(PD13_PF_LP_HSYNC);
- imx_gpio_mode(PD12_PF_ACD_OE);
-
- /* These are only needed for Sharp HR TFT displays */
- if (fbi->pcr & PCR_SHARP) {
- imx_gpio_mode(PD7_PF_REV);
- imx_gpio_mode(PD8_PF_CLS);
- imx_gpio_mode(PD9_PF_PS);
- imx_gpio_mode(PD10_PF_SPL_SPR);
- }
-}
-
#ifdef CONFIG_PM
/*
* Power management hooks. Note that we won't be called from IRQ context,
@@ -594,8 +543,6 @@ static int __init imxfb_probe(struct platform_device *pdev)
if (ret < 0)
goto failed_cmap;
- imxfb_setup_gpio(fbi);
-
imxfb_set_par(info);
ret = register_framebuffer(info);
if (ret < 0) {
OpenPOWER on IntegriCloud