Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 676 insertions, 0 deletions

diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
new file mode 100644
index 000000000000..cacd88cc84ab
--- /dev/null
+++ b/drivers/video/au1100fb.c
@@ -0,0 +1,676 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Au1100 LCD Driver.
+ *
+ * Copyright 2002 MontaVista Software
+ * Author: MontaVista Software, Inc.
+ *		ppopov@mvista.com or source@mvista.com
+ *
+ * Copyright 2002 Alchemy Semiconductor
+ * Author: Alchemy Semiconductor
+ *
+ * Based on:
+ * linux/drivers/video/skeletonfb.c -- Skeleton for a frame buffer device
+ *  Created 28 Dec 1997 by Geert Uytterhoeven
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <asm/au1000.h>
+#include <asm/pb1100.h>
+#include "au1100fb.h"
+
+#include <video/fbcon.h>
+#include <video/fbcon-mfb.h>
+#include <video/fbcon-cfb2.h>
+#include <video/fbcon-cfb4.h>
+#include <video/fbcon-cfb8.h>
+#include <video/fbcon-cfb16.h>
+
+/*
+ * Sanity check. If this is a new Au1100 based board, search for
+ * the PB1100 ifdefs to make sure you modify the code accordingly.
+ */
+#if defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_HYDROGEN3)
+#else
+error Unknown Au1100 board
+#endif
+
+#define CMAPSIZE 16
+
+static int my_lcd_index; /* default is zero */
+struct known_lcd_panels *p_lcd;
+AU1100_LCD *p_lcd_reg = (AU1100_LCD *)AU1100_LCD_ADDR;
+
+struct au1100fb_info {
+	struct fb_info_gen gen;
+	unsigned long fb_virt_start;
+	unsigned long fb_size;
+	unsigned long fb_phys;
+	int mmaped;
+	int nohwcursor;
+
+	struct { unsigned red, green, blue, pad; } palette[256];
+
+#if defined(FBCON_HAS_CFB16)
+	u16 fbcon_cmap16[16];
+#endif
+};
+
+
+struct au1100fb_par {
+        struct fb_var_screeninfo var;
+
+	int line_length;  // in bytes
+	int cmap_len;     // color-map length
+};
+
+
+static struct au1100fb_info fb_info;
+static struct au1100fb_par current_par;
+static struct display disp;
+
+int au1100fb_init(void);
+void au1100fb_setup(char *options, int *ints);
+static int au1100fb_mmap(struct fb_info *fb, struct file *file,
+		struct vm_area_struct *vma);
+static int au1100_blank(int blank_mode, struct fb_info_gen *info);
+static int au1100fb_ioctl(struct inode *inode, struct file *file, u_int cmd,
+			  u_long arg, int con, struct fb_info *info);
+
+void au1100_nocursor(struct display *p, int mode, int xx, int yy){};
+
+static struct fb_ops au1100fb_ops = {
+	owner:		THIS_MODULE,
+	fb_get_fix:	fbgen_get_fix,
+	fb_get_var:	fbgen_get_var,
+	fb_set_var:	fbgen_set_var,
+	fb_get_cmap:	fbgen_get_cmap,
+	fb_set_cmap:	fbgen_set_cmap,
+	fb_pan_display: fbgen_pan_display,
+        fb_ioctl:       au1100fb_ioctl,
+	fb_mmap:        au1100fb_mmap,
+};
+
+static void au1100_detect(void)
+{
+	/*
+	 *  This function should detect the current video mode settings
+	 *  and store it as the default video mode
+	 */
+
+	/*
+	 * Yeh, well, we're not going to change any settings so we're
+	 * always stuck with the default ...
+	 */
+
+}
+
+static int au1100_encode_fix(struct fb_fix_screeninfo *fix,
+		const void *_par, struct fb_info_gen *_info)
+{
+        struct au1100fb_info *info = (struct au1100fb_info *) _info;
+        struct au1100fb_par *par = (struct au1100fb_par *) _par;
+	struct fb_var_screeninfo *var = &par->var;
+
+	memset(fix, 0, sizeof(struct fb_fix_screeninfo));
+
+	fix->smem_start = info->fb_phys;
+	fix->smem_len = info->fb_size;
+	fix->type = FB_TYPE_PACKED_PIXELS;
+	fix->type_aux = 0;
+        fix->visual = (var->bits_per_pixel == 8) ?
+	       	FB_VISUAL_PSEUDOCOLOR	: FB_VISUAL_TRUECOLOR;
+	fix->ywrapstep = 0;
+	fix->xpanstep = 1;
+	fix->ypanstep = 1;
+	fix->line_length = current_par.line_length;
+	return 0;
+}
+
+static void set_color_bitfields(struct fb_var_screeninfo *var)
+{
+	switch (var->bits_per_pixel) {
+	case 8:
+		var->red.offset = 0;
+		var->red.length = 8;
+		var->green.offset = 0;
+		var->green.length = 8;
+		var->blue.offset = 0;
+		var->blue.length = 8;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		break;
+	case 16:	/* RGB 565 */
+		var->red.offset = 11;
+		var->red.length = 5;
+		var->green.offset = 5;
+		var->green.length = 6;
+		var->blue.offset = 0;
+		var->blue.length = 5;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		break;
+	}
+
+	var->red.msb_right = 0;
+	var->green.msb_right = 0;
+	var->blue.msb_right = 0;
+	var->transp.msb_right = 0;
+}
+
+static int au1100_decode_var(const struct fb_var_screeninfo *var,
+		void *_par, struct fb_info_gen *_info)
+{
+
+	struct au1100fb_par *par = (struct au1100fb_par *)_par;
+
+	/*
+	 * Don't allow setting any of these yet: xres and yres don't
+	 * make sense for LCD panels.
+	 */
+	if (var->xres != p_lcd->xres ||
+	    var->yres != p_lcd->yres ||
+	    var->xres != p_lcd->xres ||
+	    var->yres != p_lcd->yres) {
+		return -EINVAL;
+	}
+	if(var->bits_per_pixel != p_lcd->bpp) {
+		return -EINVAL;
+	}
+
+	memset(par, 0, sizeof(struct au1100fb_par));
+	par->var = *var;
+
+	/* FIXME */
+	switch (var->bits_per_pixel) {
+		case 8:
+			par->var.bits_per_pixel = 8;
+			break;
+		case 16:
+			par->var.bits_per_pixel = 16;
+			break;
+		default:
+			printk("color depth %d bpp not supported\n",
+					var->bits_per_pixel);
+			return -EINVAL;
+
+	}
+	set_color_bitfields(&par->var);
+	par->cmap_len = (par->var.bits_per_pixel == 8) ? 256 : 16;
+	return 0;
+}
+
+static int au1100_encode_var(struct fb_var_screeninfo *var,
+		const void *par, struct fb_info_gen *_info)
+{
+
+	*var = ((struct au1100fb_par *)par)->var;
+	return 0;
+}
+
+static void
+au1100_get_par(void *_par, struct fb_info_gen *_info)
+{
+	*(struct au1100fb_par *)_par = current_par;
+}
+
+static void au1100_set_par(const void *par, struct fb_info_gen *info)
+{
+	/* nothing to do: we don't change any settings */
+}
+
+static int au1100_getcolreg(unsigned regno, unsigned *red, unsigned *green,
+			 unsigned *blue, unsigned *transp,
+			 struct fb_info *info)
+{
+
+	struct au1100fb_info* i = (struct au1100fb_info*)info;
+
+	if (regno > 255)
+		return 1;
+
+	*red    = i->palette[regno].red;
+	*green  = i->palette[regno].green;
+	*blue   = i->palette[regno].blue;
+	*transp = 0;
+
+	return 0;
+}
+
+static int au1100_setcolreg(unsigned regno, unsigned red, unsigned green,
+			 unsigned blue, unsigned transp,
+			 struct fb_info *info)
+{
+	struct au1100fb_info* i = (struct au1100fb_info *)info;
+	u32 rgbcol;
+
+	if (regno > 255)
+		return 1;
+
+	i->palette[regno].red    = red;
+	i->palette[regno].green  = green;
+	i->palette[regno].blue   = blue;
+
+	switch(p_lcd->bpp) {
+#ifdef FBCON_HAS_CFB8
+	case 8:
+		red >>= 10;
+		green >>= 10;
+		blue >>= 10;
+		p_lcd_reg->lcd_pallettebase[regno] = (blue&0x1f) |
+			((green&0x3f)<<5) | ((red&0x1f)<<11);
+		break;
+#endif
+#ifdef FBCON_HAS_CFB16
+	case 16:
+		i->fbcon_cmap16[regno] =
+			((red & 0xf800) >> 0) |
+			((green & 0xfc00) >> 5) |
+			((blue & 0xf800) >> 11);
+		break;
+#endif
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+
+static int  au1100_blank(int blank_mode, struct fb_info_gen *_info)
+{
+
+	switch (blank_mode) {
+	case VESA_NO_BLANKING:
+		/* turn on panel */
+		//printk("turn on panel\n");
+#ifdef CONFIG_MIPS_PB1100
+		p_lcd_reg->lcd_control |= LCD_CONTROL_GO;
+		au_writew(au_readw(PB1100_G_CONTROL) | p_lcd->mode_backlight,
+			PB1100_G_CONTROL);
+#endif
+#ifdef CONFIG_MIPS_HYDROGEN3
+		/*  Turn controller & power supply on,  GPIO213 */
+		au_writel(0x20002000, 0xB1700008);
+		au_writel(0x00040000, 0xB1900108);
+		au_writel(0x01000100, 0xB1700008);
+#endif
+		au_sync();
+		break;
+
+	case VESA_VSYNC_SUSPEND:
+	case VESA_HSYNC_SUSPEND:
+	case VESA_POWERDOWN:
+		/* turn off panel */
+		//printk("turn off panel\n");
+#ifdef CONFIG_MIPS_PB1100
+		au_writew(au_readw(PB1100_G_CONTROL) & ~p_lcd->mode_backlight,
+			PB1100_G_CONTROL);
+		p_lcd_reg->lcd_control &= ~LCD_CONTROL_GO;
+#endif
+		au_sync();
+		break;
+	default:
+		break;
+
+	}
+	return 0;
+}
+
+static void au1100_set_disp(const void *unused, struct display *disp,
+			 struct fb_info_gen *info)
+{
+	disp->screen_base = (char *)fb_info.fb_virt_start;
+
+	switch (disp->var.bits_per_pixel) {
+#ifdef FBCON_HAS_CFB8
+	case 8:
+		disp->dispsw = &fbcon_cfb8;
+		if (fb_info.nohwcursor)
+			fbcon_cfb8.cursor = au1100_nocursor;
+		break;
+#endif
+#ifdef FBCON_HAS_CFB16
+	case 16:
+		disp->dispsw = &fbcon_cfb16;
+		disp->dispsw_data = fb_info.fbcon_cmap16;
+		if (fb_info.nohwcursor)
+			fbcon_cfb16.cursor = au1100_nocursor;
+		break;
+#endif
+	default:
+		disp->dispsw = &fbcon_dummy;
+		disp->dispsw_data = NULL;
+		break;
+	}
+}
+
+static int
+au1100fb_mmap(struct fb_info *_fb,
+	     struct file *file,
+	     struct vm_area_struct *vma)
+{
+	unsigned int len;
+	unsigned long start=0, off;
+	struct au1100fb_info *fb = (struct au1100fb_info *)_fb;
+
+	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
+		return -EINVAL;
+	}
+
+	start = fb_info.fb_phys & PAGE_MASK;
+	len = PAGE_ALIGN((start & ~PAGE_MASK) + fb_info.fb_size);
+
+	off = vma->vm_pgoff << PAGE_SHIFT;
+
+	if ((vma->vm_end - vma->vm_start + off) > len) {
+		return -EINVAL;
+	}
+
+	off += start;
+	vma->vm_pgoff = off >> PAGE_SHIFT;
+
+	pgprot_val(vma->vm_page_prot) &= ~_CACHE_MASK;
+	//pgprot_val(vma->vm_page_prot) |= _CACHE_CACHABLE_NONCOHERENT;
+	pgprot_val(vma->vm_page_prot) |= (6 << 9); //CCA=6
+
+	/* This is an IO map - tell maydump to skip this VMA */
+	vma->vm_flags |= VM_IO;
+
+	if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
+				vma->vm_end - vma->vm_start,
+				vma->vm_page_prot)) {
+		return -EAGAIN;
+	}
+
+	fb->mmaped = 1;
+	return 0;
+}
+
+int au1100_pan_display(const struct fb_var_screeninfo *var,
+		       struct fb_info_gen *info)
+{
+	return 0;
+}
+
+static int au1100fb_ioctl(struct inode *inode, struct file *file, u_int cmd,
+			  u_long arg, int con, struct fb_info *info)
+{
+	/* nothing to do yet */
+	return -EINVAL;
+}
+
+static struct fbgen_hwswitch au1100_switch = {
+	au1100_detect,
+	au1100_encode_fix,
+	au1100_decode_var,
+	au1100_encode_var,
+	au1100_get_par,
+	au1100_set_par,
+	au1100_getcolreg,
+	au1100_setcolreg,
+	au1100_pan_display,
+	au1100_blank,
+	au1100_set_disp
+};
+
+
+int au1100_setmode(void)
+{
+	int words;
+
+	/* FIXME Need to accomodate for swivel mode and 12bpp, <8bpp*/
+	switch (p_lcd->mode_control & LCD_CONTROL_SM)
+	{
+		case LCD_CONTROL_SM_0:
+		case LCD_CONTROL_SM_180:
+		words = (p_lcd->xres * p_lcd->yres * p_lcd->bpp) / 32;
+			break;
+		case LCD_CONTROL_SM_90:
+		case LCD_CONTROL_SM_270:
+			/* is this correct? */
+		words = (p_lcd->xres * p_lcd->bpp) / 8;
+			break;
+		default:
+			printk("mode_control reg not initialized\n");
+			return -EINVAL;
+	}
+
+	/*
+	 * Setup LCD controller
+	 */
+
+	p_lcd_reg->lcd_control = p_lcd->mode_control;
+	p_lcd_reg->lcd_intstatus = 0;
+	p_lcd_reg->lcd_intenable = 0;
+	p_lcd_reg->lcd_horztiming = p_lcd->mode_horztiming;
+	p_lcd_reg->lcd_verttiming = p_lcd->mode_verttiming;
+	p_lcd_reg->lcd_clkcontrol = p_lcd->mode_clkcontrol;
+	p_lcd_reg->lcd_words = words - 1;
+	p_lcd_reg->lcd_dmaaddr0 = fb_info.fb_phys;
+
+	/* turn on panel */
+#ifdef CONFIG_MIPS_PB1100
+	au_writew(au_readw(PB1100_G_CONTROL) | p_lcd->mode_backlight,
+			PB1100_G_CONTROL);
+#endif
+#ifdef CONFIG_MIPS_HYDROGEN3
+	/*  Turn controller & power supply on,  GPIO213 */
+	au_writel(0x20002000, 0xB1700008);
+	au_writel(0x00040000, 0xB1900108);
+	au_writel(0x01000100, 0xB1700008);
+#endif
+
+	p_lcd_reg->lcd_control |= LCD_CONTROL_GO;
+
+	return 0;
+}
+
+
+int __init au1100fb_init(void)
+{
+	uint32 sys_clksrc;
+	unsigned long page;
+
+	/*
+	* Get the panel information/display mode and update the registry
+	*/
+	p_lcd = &panels[my_lcd_index];
+
+	switch (p_lcd->mode_control & LCD_CONTROL_SM)
+	{
+		case LCD_CONTROL_SM_0:
+		case LCD_CONTROL_SM_180:
+		p_lcd->xres =
+			(p_lcd->mode_horztiming & LCD_HORZTIMING_PPL) + 1;
+		p_lcd->yres =
+			(p_lcd->mode_verttiming & LCD_VERTTIMING_LPP) + 1;
+			break;
+		case LCD_CONTROL_SM_90:
+		case LCD_CONTROL_SM_270:
+		p_lcd->yres =
+			(p_lcd->mode_horztiming & LCD_HORZTIMING_PPL) + 1;
+		p_lcd->xres =
+			(p_lcd->mode_verttiming & LCD_VERTTIMING_LPP) + 1;
+			break;
+	}
+
+	/*
+	 * Panel dimensions x bpp must be divisible by 32
+	 */
+	if (((p_lcd->yres * p_lcd->bpp) % 32) != 0)
+		printk("VERT %% 32\n");
+	if (((p_lcd->xres * p_lcd->bpp) % 32) != 0)
+		printk("HORZ %% 32\n");
+
+	/*
+	 * Allocate LCD framebuffer from system memory
+	 */
+	fb_info.fb_size = (p_lcd->xres * p_lcd->yres * p_lcd->bpp) / 8;
+
+	current_par.var.xres = p_lcd->xres;
+	current_par.var.xres_virtual = p_lcd->xres;
+	current_par.var.yres = p_lcd->yres;
+	current_par.var.yres_virtual = p_lcd->yres;
+	current_par.var.bits_per_pixel = p_lcd->bpp;
+
+	/* FIX!!! only works for 8/16 bpp */
+	current_par.line_length = p_lcd->xres * p_lcd->bpp / 8; /* in bytes */
+	fb_info.fb_virt_start = (unsigned long )
+		__get_free_pages(GFP_ATOMIC | GFP_DMA,
+				get_order(fb_info.fb_size + 0x1000));
+	if (!fb_info.fb_virt_start) {
+		printk("Unable to allocate fb memory\n");
+		return -ENOMEM;
+	}
+	fb_info.fb_phys = virt_to_bus((void *)fb_info.fb_virt_start);
+
+	/*
+	 * Set page reserved so that mmap will work. This is necessary
+	 * since we'll be remapping normal memory.
+	 */
+	for (page = fb_info.fb_virt_start;
+	     page < PAGE_ALIGN(fb_info.fb_virt_start + fb_info.fb_size);
+	     page += PAGE_SIZE) {
+		SetPageReserved(virt_to_page(page));
+	}
+
+	memset((void *)fb_info.fb_virt_start, 0, fb_info.fb_size);
+
+	/* set freqctrl now to allow more time to stabilize */
+	/* zero-out out LCD bits */
+	sys_clksrc = au_readl(SYS_CLKSRC) & ~0x000003e0;
+	sys_clksrc |= p_lcd->mode_toyclksrc;
+	au_writel(sys_clksrc, SYS_CLKSRC);
+
+	/* FIXME add check to make sure auxpll is what is expected! */
+	au1100_setmode();
+
+	fb_info.gen.parsize = sizeof(struct au1100fb_par);
+	fb_info.gen.fbhw = &au1100_switch;
+
+	strcpy(fb_info.gen.info.modename, "Au1100 LCD");
+	fb_info.gen.info.changevar = NULL;
+	fb_info.gen.info.node = -1;
+
+	fb_info.gen.info.fbops = &au1100fb_ops;
+	fb_info.gen.info.disp = &disp;
+	fb_info.gen.info.switch_con = &fbgen_switch;
+	fb_info.gen.info.updatevar = &fbgen_update_var;
+	fb_info.gen.info.blank = &fbgen_blank;
+	fb_info.gen.info.flags = FBINFO_FLAG_DEFAULT;
+
+	/* This should give a reasonable default video mode */
+	fbgen_get_var(&disp.var, -1, &fb_info.gen.info);
+	fbgen_do_set_var(&disp.var, 1, &fb_info.gen);
+	fbgen_set_disp(-1, &fb_info.gen);
+	fbgen_install_cmap(0, &fb_info.gen);
+	if (register_framebuffer(&fb_info.gen.info) < 0)
+		return -EINVAL;
+	printk(KERN_INFO "fb%d: %s frame buffer device\n",
+			GET_FB_IDX(fb_info.gen.info.node),
+			fb_info.gen.info.modename);
+
+	return 0;
+}
+
+
+void au1100fb_cleanup(struct fb_info *info)
+{
+	unregister_framebuffer(info);
+}
+
+
+void au1100fb_setup(char *options, int *ints)
+{
+	char* this_opt;
+	int i;
+	int num_panels = sizeof(panels)/sizeof(struct known_lcd_panels);
+
+
+	if (!options || !*options)
+		return;
+
+	for(this_opt=strtok(options, ","); this_opt;
+	    this_opt=strtok(NULL, ",")) {
+		if (!strncmp(this_opt, "panel:", 6)) {
+#if defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100)
+			/* Read Pb1100 Switch S10 ? */
+			if (!strncmp(this_opt+6, "s10", 3))
+			{
+				int panel;
+				panel = *(volatile int *)0xAE000008; /* BCSR SWITCHES */
+				panel >>= 8;
+				panel &= 0x0F;
+				if (panel >= num_panels) panel = 0;
+				my_lcd_index = panel;
+			}
+			else
+#endif
+			/* Get the panel name, everything else if fixed */
+			for (i=0; i<num_panels; i++) {
+				if (!strncmp(this_opt+6, panels[i].panel_name,
+							strlen(this_opt))) {
+					my_lcd_index = i;
+					break;
+				}
+			}
+		}
+		else if (!strncmp(this_opt, "nohwcursor", 10)) {
+			printk("nohwcursor\n");
+			fb_info.nohwcursor = 1;
+		}
+	}
+
+	printk("au1100fb: Panel %d %s\n", my_lcd_index,
+		panels[my_lcd_index].panel_name);
+}
+
+
+
+#ifdef MODULE
+MODULE_LICENSE("GPL");
+int init_module(void)
+{
+	return au1100fb_init();
+}
+
+void cleanup_module(void)
+{
+	au1100fb_cleanup(void);
+}
+
+MODULE_AUTHOR("Pete Popov <ppopov@mvista.com>");
+MODULE_DESCRIPTION("Au1100 LCD framebuffer device driver");
+#endif /* MODULE */