Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1010 insertions, 0 deletions

diff --git a/drivers/video/aty/radeon_monitor.c b/drivers/video/aty/radeon_monitor.c
new file mode 100644
index 000000000000..ea7c86306918
--- /dev/null
+++ b/drivers/video/aty/radeon_monitor.c
@@ -0,0 +1,1010 @@
+#include "radeonfb.h"
+#include "../edid.h"
+
+static struct fb_var_screeninfo radeonfb_default_var = {
+	.xres		= 640,
+	.yres		= 480,
+	.xres_virtual	= 640,
+	.yres_virtual	= 480,
+	.bits_per_pixel = 8,
+	.red		= { .length = 8 },
+	.green		= { .length = 8 },
+	.blue		= { .length = 8 },
+	.activate	= FB_ACTIVATE_NOW,
+	.height		= -1,
+	.width		= -1,
+	.pixclock	= 39721,
+	.left_margin	= 40,
+	.right_margin	= 24,
+	.upper_margin	= 32,
+	.lower_margin	= 11,
+	.hsync_len	= 96,
+	.vsync_len	= 2,
+	.vmode		= FB_VMODE_NONINTERLACED
+};
+
+static char *radeon_get_mon_name(int type)
+{
+	char *pret = NULL;
+
+	switch (type) {
+		case MT_NONE:
+			pret = "no";
+			break;
+		case MT_CRT:
+			pret = "CRT";
+			break;
+		case MT_DFP:
+			pret = "DFP";
+			break;
+		case MT_LCD:
+			pret = "LCD";
+			break;
+		case MT_CTV:
+			pret = "CTV";
+			break;
+		case MT_STV:
+			pret = "STV";
+			break;
+	}
+
+	return pret;
+}
+
+
+#ifdef CONFIG_PPC_OF
+/*
+ * Try to find monitor informations & EDID data out of the Open Firmware
+ * device-tree. This also contains some "hacks" to work around a few machine
+ * models with broken OF probing by hard-coding known EDIDs for some Mac
+ * laptops internal LVDS panel. (XXX: not done yet)
+ */
+static int __devinit radeon_parse_montype_prop(struct device_node *dp, u8 **out_EDID,
+					       int hdno)
+{
+        static char *propnames[] = { "DFP,EDID", "LCD,EDID", "EDID",
+				     "EDID1", "EDID2",  NULL };
+	u8 *pedid = NULL;
+	u8 *pmt = NULL;
+	u8 *tmp;
+        int i, mt = MT_NONE;  
+	
+	RTRACE("analyzing OF properties...\n");
+	pmt = (u8 *)get_property(dp, "display-type", NULL);
+	if (!pmt)
+		return MT_NONE;
+	RTRACE("display-type: %s\n", pmt);
+	/* OF says "LCD" for DFP as well, we discriminate from the caller of this
+	 * function
+	 */
+	if (!strcmp(pmt, "LCD") || !strcmp(pmt, "DFP"))
+		mt = MT_DFP;
+	else if (!strcmp(pmt, "CRT"))
+		mt = MT_CRT;
+	else {
+		if (strcmp(pmt, "NONE") != 0)
+			printk(KERN_WARNING "radeonfb: Unknown OF display-type: %s\n",
+			       pmt);
+		return MT_NONE;
+	}
+
+	for (i = 0; propnames[i] != NULL; ++i) {
+		pedid = (u8 *)get_property(dp, propnames[i], NULL);
+		if (pedid != NULL)
+			break;
+	}
+	/* We didn't find the EDID in the leaf node, some cards will actually
+	 * put EDID1/EDID2 in the parent, look for these (typically M6 tipb).
+	 * single-head cards have hdno == -1 and skip this step
+	 */
+	if (pedid == NULL && dp->parent && (hdno != -1))
+		pedid = get_property(dp->parent, (hdno == 0) ? "EDID1" : "EDID2", NULL);
+	if (pedid == NULL && dp->parent && (hdno == 0))
+		pedid = get_property(dp->parent, "EDID", NULL);
+	if (pedid == NULL)
+		return mt;
+
+	tmp = (u8 *)kmalloc(EDID_LENGTH, GFP_KERNEL);
+	if (!tmp)
+		return mt;
+	memcpy(tmp, pedid, EDID_LENGTH);
+	*out_EDID = tmp;
+	return mt;
+}
+
+static int __devinit radeon_probe_OF_head(struct radeonfb_info *rinfo, int head_no,
+					  u8 **out_EDID)
+{
+        struct device_node *dp;
+
+	RTRACE("radeon_probe_OF_head\n");
+
+        dp = rinfo->of_node;
+        while (dp == NULL)
+		return MT_NONE;
+
+	if (rinfo->has_CRTC2) {
+		char *pname;
+		int len, second = 0;
+
+		dp = dp->child;
+		do {
+			if (!dp)
+				return MT_NONE;
+			pname = (char *)get_property(dp, "name", NULL);
+			if (!pname)
+				return MT_NONE;
+			len = strlen(pname);
+			RTRACE("head: %s (letter: %c, head_no: %d)\n",
+			       pname, pname[len-1], head_no);
+			if (pname[len-1] == 'A' && head_no == 0) {
+				int mt = radeon_parse_montype_prop(dp, out_EDID, 0);
+				/* Maybe check for LVDS_GEN_CNTL here ? I need to check out
+				 * what OF does when booting with lid closed
+				 */
+				if (mt == MT_DFP && rinfo->is_mobility)
+					mt = MT_LCD;
+				return mt;
+			} else if (pname[len-1] == 'B' && head_no == 1)
+				return radeon_parse_montype_prop(dp, out_EDID, 1);
+			second = 1;
+			dp = dp->sibling;
+		} while(!second);
+	} else {
+		if (head_no > 0)
+			return MT_NONE;
+		return radeon_parse_montype_prop(dp, out_EDID, -1);
+	}
+        return MT_NONE;
+}
+#endif /* CONFIG_PPC_OF */
+
+
+static int __devinit radeon_get_panel_info_BIOS(struct radeonfb_info *rinfo)
+{
+	unsigned long tmp, tmp0;
+	char stmp[30];
+	int i;
+
+	if (!rinfo->bios_seg)
+		return 0;
+
+	if (!(tmp = BIOS_IN16(rinfo->fp_bios_start + 0x40))) {
+		printk(KERN_ERR "radeonfb: Failed to detect DFP panel info using BIOS\n");
+		rinfo->panel_info.pwr_delay = 200;
+		return 0;
+	}
+
+	for(i=0; i<24; i++)
+		stmp[i] = BIOS_IN8(tmp+i+1);
+	stmp[24] = 0;
+	printk("radeonfb: panel ID string: %s\n", stmp);
+	rinfo->panel_info.xres = BIOS_IN16(tmp + 25);
+	rinfo->panel_info.yres = BIOS_IN16(tmp + 27);
+	printk("radeonfb: detected LVDS panel size from BIOS: %dx%d\n",
+		rinfo->panel_info.xres, rinfo->panel_info.yres);
+
+	rinfo->panel_info.pwr_delay = BIOS_IN16(tmp + 44);
+	RTRACE("BIOS provided panel power delay: %d\n", rinfo->panel_info.pwr_delay);
+	if (rinfo->panel_info.pwr_delay > 2000 || rinfo->panel_info.pwr_delay <= 0)
+		rinfo->panel_info.pwr_delay = 2000;
+
+	/*
+	 * Some panels only work properly with some divider combinations
+	 */
+	rinfo->panel_info.ref_divider = BIOS_IN16(tmp + 46);
+	rinfo->panel_info.post_divider = BIOS_IN8(tmp + 48);
+	rinfo->panel_info.fbk_divider = BIOS_IN16(tmp + 49);
+	if (rinfo->panel_info.ref_divider != 0 &&
+	    rinfo->panel_info.fbk_divider > 3) {
+		rinfo->panel_info.use_bios_dividers = 1;
+		printk(KERN_INFO "radeondb: BIOS provided dividers will be used\n");
+		RTRACE("ref_divider = %x\n", rinfo->panel_info.ref_divider);
+		RTRACE("post_divider = %x\n", rinfo->panel_info.post_divider);
+		RTRACE("fbk_divider = %x\n", rinfo->panel_info.fbk_divider);
+	}
+	RTRACE("Scanning BIOS table ...\n");
+	for(i=0; i<32; i++) {
+		tmp0 = BIOS_IN16(tmp+64+i*2);
+		if (tmp0 == 0)
+			break;
+		RTRACE(" %d x %d\n", BIOS_IN16(tmp0), BIOS_IN16(tmp0+2));
+		if ((BIOS_IN16(tmp0) == rinfo->panel_info.xres) &&
+		    (BIOS_IN16(tmp0+2) == rinfo->panel_info.yres)) {
+			rinfo->panel_info.hblank = (BIOS_IN16(tmp0+17) - BIOS_IN16(tmp0+19)) * 8;
+			rinfo->panel_info.hOver_plus = ((BIOS_IN16(tmp0+21) -
+							 BIOS_IN16(tmp0+19) -1) * 8) & 0x7fff;
+			rinfo->panel_info.hSync_width = BIOS_IN8(tmp0+23) * 8;
+			rinfo->panel_info.vblank = BIOS_IN16(tmp0+24) - BIOS_IN16(tmp0+26);
+			rinfo->panel_info.vOver_plus = (BIOS_IN16(tmp0+28) & 0x7ff) - BIOS_IN16(tmp0+26);
+			rinfo->panel_info.vSync_width = (BIOS_IN16(tmp0+28) & 0xf800) >> 11;
+			rinfo->panel_info.clock = BIOS_IN16(tmp0+9);
+			/* Assume high active syncs for now until ATI tells me more... maybe we
+			 * can probe register values here ?
+			 */
+			rinfo->panel_info.hAct_high = 1;
+			rinfo->panel_info.vAct_high = 1;
+			/* Mark panel infos valid */
+			rinfo->panel_info.valid = 1;
+
+			RTRACE("Found panel in BIOS table:\n");
+			RTRACE("  hblank: %d\n", rinfo->panel_info.hblank);
+			RTRACE("  hOver_plus: %d\n", rinfo->panel_info.hOver_plus);
+			RTRACE("  hSync_width: %d\n", rinfo->panel_info.hSync_width);
+			RTRACE("  vblank: %d\n", rinfo->panel_info.vblank);
+			RTRACE("  vOver_plus: %d\n", rinfo->panel_info.vOver_plus);
+			RTRACE("  vSync_width: %d\n", rinfo->panel_info.vSync_width);
+			RTRACE("  clock: %d\n", rinfo->panel_info.clock);
+				
+			return 1;
+		}
+	}
+	RTRACE("Didn't find panel in BIOS table !\n");
+
+	return 0;
+}
+
+/* Try to extract the connector informations from the BIOS. This
+ * doesn't quite work yet, but it's output is still useful for
+ * debugging
+ */
+static void __devinit radeon_parse_connector_info(struct radeonfb_info *rinfo)
+{
+	int offset, chips, connectors, tmp, i, conn, type;
+
+	static char* __conn_type_table[16] = {
+		"NONE", "Proprietary", "CRT", "DVI-I", "DVI-D", "Unknown", "Unknown",
+		"Unknown", "Unknown", "Unknown", "Unknown", "Unknown", "Unknown",
+		"Unknown", "Unknown", "Unknown"
+	};
+
+	if (!rinfo->bios_seg)
+		return;
+
+	offset = BIOS_IN16(rinfo->fp_bios_start + 0x50);
+	if (offset == 0) {
+		printk(KERN_WARNING "radeonfb: No connector info table detected\n");
+		return;
+	}
+
+	/* Don't do much more at this point but displaying the data if
+	 * DEBUG is enabled
+	 */
+	chips = BIOS_IN8(offset++) >> 4;
+	RTRACE("%d chips in connector info\n", chips);
+	for (i = 0; i < chips; i++) {
+		tmp = BIOS_IN8(offset++);
+		connectors = tmp & 0x0f;
+		RTRACE(" - chip %d has %d connectors\n", tmp >> 4, connectors);
+		for (conn = 0; ; conn++) {
+			tmp = BIOS_IN16(offset);
+			if (tmp == 0)
+				break;
+			offset += 2;
+			type = (tmp >> 12) & 0x0f;
+			RTRACE("  * connector %d of type %d (%s) : %04x\n",
+			       conn, type, __conn_type_table[type], tmp);
+		}
+	}
+}
+
+
+/*
+ * Probe physical connection of a CRT. This code comes from XFree
+ * as well and currently is only implemented for the CRT DAC, the
+ * code for the TVDAC is commented out in XFree as "non working"
+ */
+static int __devinit radeon_crt_is_connected(struct radeonfb_info *rinfo, int is_crt_dac)
+{
+    int	          connected = 0;
+
+    /* the monitor either wasn't connected or it is a non-DDC CRT.
+     * try to probe it
+     */
+    if (is_crt_dac) {
+	unsigned long ulOrigVCLK_ECP_CNTL;
+	unsigned long ulOrigDAC_CNTL;
+	unsigned long ulOrigDAC_EXT_CNTL;
+	unsigned long ulOrigCRTC_EXT_CNTL;
+	unsigned long ulData;
+	unsigned long ulMask;
+
+	ulOrigVCLK_ECP_CNTL = INPLL(VCLK_ECP_CNTL);
+
+	ulData              = ulOrigVCLK_ECP_CNTL;
+	ulData             &= ~(PIXCLK_ALWAYS_ONb
+				| PIXCLK_DAC_ALWAYS_ONb);
+	ulMask              = ~(PIXCLK_ALWAYS_ONb
+				| PIXCLK_DAC_ALWAYS_ONb);
+	OUTPLLP(VCLK_ECP_CNTL, ulData, ulMask);
+
+	ulOrigCRTC_EXT_CNTL = INREG(CRTC_EXT_CNTL);
+	ulData              = ulOrigCRTC_EXT_CNTL;
+	ulData             |= CRTC_CRT_ON;
+	OUTREG(CRTC_EXT_CNTL, ulData);
+   
+	ulOrigDAC_EXT_CNTL = INREG(DAC_EXT_CNTL);
+	ulData             = ulOrigDAC_EXT_CNTL;
+	ulData            &= ~DAC_FORCE_DATA_MASK;
+	ulData            |=  (DAC_FORCE_BLANK_OFF_EN
+			       |DAC_FORCE_DATA_EN
+			       |DAC_FORCE_DATA_SEL_MASK);
+	if ((rinfo->family == CHIP_FAMILY_RV250) ||
+	    (rinfo->family == CHIP_FAMILY_RV280))
+	    ulData |= (0x01b6 << DAC_FORCE_DATA_SHIFT);
+	else
+	    ulData |= (0x01ac << DAC_FORCE_DATA_SHIFT);
+
+	OUTREG(DAC_EXT_CNTL, ulData);
+
+	ulOrigDAC_CNTL     = INREG(DAC_CNTL);
+	ulData             = ulOrigDAC_CNTL;
+	ulData            |= DAC_CMP_EN;
+	ulData            &= ~(DAC_RANGE_CNTL_MASK
+			       | DAC_PDWN);
+	ulData            |= 0x2;
+	OUTREG(DAC_CNTL, ulData);
+
+	mdelay(1);
+
+	ulData     = INREG(DAC_CNTL);
+	connected =  (DAC_CMP_OUTPUT & ulData) ? 1 : 0;
+  
+	ulData    = ulOrigVCLK_ECP_CNTL;
+	ulMask    = 0xFFFFFFFFL;
+	OUTPLLP(VCLK_ECP_CNTL, ulData, ulMask);
+
+	OUTREG(DAC_CNTL,      ulOrigDAC_CNTL     );
+	OUTREG(DAC_EXT_CNTL,  ulOrigDAC_EXT_CNTL );
+	OUTREG(CRTC_EXT_CNTL, ulOrigCRTC_EXT_CNTL);
+    }
+
+    return connected ? MT_CRT : MT_NONE;
+}
+
+/*
+ * Parse the "monitor_layout" string if any. This code is mostly
+ * copied from XFree's radeon driver
+ */
+static int __devinit radeon_parse_monitor_layout(struct radeonfb_info *rinfo,
+						 const char *monitor_layout)
+{
+	char s1[5], s2[5];
+	int i = 0, second = 0;
+	const char *s;
+
+	if (!monitor_layout)
+		return 0;
+
+	s = monitor_layout;
+	do {
+		switch(*s) {
+		case ',':
+			s1[i] = '\0';
+			i = 0;
+			second = 1;
+			break;
+		case ' ':
+		case '\0':
+			break;
+		default:
+			if (i > 4)
+				break;
+			if (second)
+				s2[i] = *s;
+			else
+				s1[i] = *s;
+			i++;
+		}
+	} while (*s++);
+	if (second)
+		s2[i] = 0;
+	else {
+		s1[i] = 0;
+		s2[0] = 0;
+	}
+	if (strcmp(s1, "CRT") == 0)
+		rinfo->mon1_type = MT_CRT;
+	else if (strcmp(s1, "TMDS") == 0)
+		rinfo->mon1_type = MT_DFP;
+	else if (strcmp(s1, "LVDS") == 0)
+		rinfo->mon1_type = MT_LCD;
+
+	if (strcmp(s2, "CRT") == 0)
+		rinfo->mon2_type = MT_CRT;
+	else if (strcmp(s2, "TMDS") == 0)
+		rinfo->mon2_type = MT_DFP;
+	else if (strcmp(s2, "LVDS") == 0)
+		rinfo->mon2_type = MT_LCD;
+
+	return 1;
+}
+
+/*
+ * Probe display on both primary and secondary card's connector (if any)
+ * by various available techniques (i2c, OF device tree, BIOS, ...) and
+ * try to retreive EDID. The algorithm here comes from XFree's radeon
+ * driver
+ */
+void __devinit radeon_probe_screens(struct radeonfb_info *rinfo,
+				    const char *monitor_layout, int ignore_edid)
+{
+#ifdef CONFIG_FB_RADEON_I2C
+	int ddc_crt2_used = 0;	
+#endif
+	int tmp, i;
+
+	radeon_parse_connector_info(rinfo);
+
+	if (radeon_parse_monitor_layout(rinfo, monitor_layout)) {
+
+		/*
+		 * If user specified a monitor_layout option, use it instead
+		 * of auto-detecting. Maybe we should only use this argument
+		 * on the first radeon card probed or provide a way to specify
+		 * a layout for each card ?
+		 */
+
+		RTRACE("Using specified monitor layout: %s", monitor_layout);
+#ifdef CONFIG_FB_RADEON_I2C
+		if (!ignore_edid) {
+			if (rinfo->mon1_type != MT_NONE)
+				if (!radeon_probe_i2c_connector(rinfo, ddc_dvi, &rinfo->mon1_EDID)) {
+					radeon_probe_i2c_connector(rinfo, ddc_crt2, &rinfo->mon1_EDID);
+					ddc_crt2_used = 1;
+				}
+			if (rinfo->mon2_type != MT_NONE)
+				if (!radeon_probe_i2c_connector(rinfo, ddc_vga, &rinfo->mon2_EDID) &&
+				    !ddc_crt2_used)
+					radeon_probe_i2c_connector(rinfo, ddc_crt2, &rinfo->mon2_EDID);
+		}
+#endif /* CONFIG_FB_RADEON_I2C */
+		if (rinfo->mon1_type == MT_NONE) {
+			if (rinfo->mon2_type != MT_NONE) {
+				rinfo->mon1_type = rinfo->mon2_type;
+				rinfo->mon1_EDID = rinfo->mon2_EDID;
+			} else {
+				rinfo->mon1_type = MT_CRT;
+				printk(KERN_INFO "radeonfb: No valid monitor, assuming CRT on first port\n");
+			}
+			rinfo->mon2_type = MT_NONE;
+			rinfo->mon2_EDID = NULL;
+		}
+	} else {
+		/*
+		 * Auto-detecting display type (well... trying to ...)
+		 */
+		
+		RTRACE("Starting monitor auto detection...\n");
+
+#if DEBUG && defined(CONFIG_FB_RADEON_I2C)
+		{
+			u8 *EDIDs[4] = { NULL, NULL, NULL, NULL };
+			int mon_types[4] = {MT_NONE, MT_NONE, MT_NONE, MT_NONE};
+			int i;
+
+			for (i = 0; i < 4; i++)
+				mon_types[i] = radeon_probe_i2c_connector(rinfo,
+									  i+1, &EDIDs[i]);
+		}
+#endif /* DEBUG */
+		/*
+		 * Old single head cards
+		 */
+		if (!rinfo->has_CRTC2) {
+#ifdef CONFIG_PPC_OF
+			if (rinfo->mon1_type == MT_NONE)
+				rinfo->mon1_type = radeon_probe_OF_head(rinfo, 0,
+									&rinfo->mon1_EDID);
+#endif /* CONFIG_PPC_OF */
+#ifdef CONFIG_FB_RADEON_I2C
+			if (rinfo->mon1_type == MT_NONE)
+				rinfo->mon1_type =
+					radeon_probe_i2c_connector(rinfo, ddc_dvi,
+								   &rinfo->mon1_EDID);
+			if (rinfo->mon1_type == MT_NONE)
+				rinfo->mon1_type =
+					radeon_probe_i2c_connector(rinfo, ddc_vga,
+								   &rinfo->mon1_EDID);
+			if (rinfo->mon1_type == MT_NONE)
+				rinfo->mon1_type =
+					radeon_probe_i2c_connector(rinfo, ddc_crt2,
+								   &rinfo->mon1_EDID);	
+#endif /* CONFIG_FB_RADEON_I2C */
+			if (rinfo->mon1_type == MT_NONE)
+				rinfo->mon1_type = MT_CRT;
+			goto bail;
+		}
+
+		/*
+		 * Check for cards with reversed DACs or TMDS controllers using BIOS
+		 */
+		if (rinfo->bios_seg &&
+		    (tmp = BIOS_IN16(rinfo->fp_bios_start + 0x50))) {
+			for (i = 1; i < 4; i++) {
+				unsigned int tmp0;
+
+				if (!BIOS_IN8(tmp + i*2) && i > 1)
+					break;
+				tmp0 = BIOS_IN16(tmp + i*2);
+				if ((!(tmp0 & 0x01)) && (((tmp0 >> 8) & 0x0f) == ddc_dvi)) {
+					rinfo->reversed_DAC = 1;
+					printk(KERN_INFO "radeonfb: Reversed DACs detected\n");
+				}
+				if ((((tmp0 >> 8) & 0x0f) == ddc_dvi) && ((tmp0 >> 4) & 0x01)) {
+					rinfo->reversed_TMDS = 1;
+					printk(KERN_INFO "radeonfb: Reversed TMDS detected\n");
+				}
+			}
+		}
+
+		/*
+		 * Probe primary head (DVI or laptop internal panel)
+		 */
+#ifdef CONFIG_PPC_OF
+		if (rinfo->mon1_type == MT_NONE)
+			rinfo->mon1_type = radeon_probe_OF_head(rinfo, 0,
+								&rinfo->mon1_EDID);
+#endif /* CONFIG_PPC_OF */
+#ifdef CONFIG_FB_RADEON_I2C
+		if (rinfo->mon1_type == MT_NONE)
+			rinfo->mon1_type = radeon_probe_i2c_connector(rinfo, ddc_dvi,
+								      &rinfo->mon1_EDID);
+		if (rinfo->mon1_type == MT_NONE) {
+			rinfo->mon1_type = radeon_probe_i2c_connector(rinfo, ddc_crt2,
+								      &rinfo->mon1_EDID);
+			if (rinfo->mon1_type != MT_NONE)
+				ddc_crt2_used = 1;
+		}
+#endif /* CONFIG_FB_RADEON_I2C */
+		if (rinfo->mon1_type == MT_NONE && rinfo->is_mobility &&
+		    ((rinfo->bios_seg && (INREG(BIOS_4_SCRATCH) & 4))
+		     || (INREG(LVDS_GEN_CNTL) & LVDS_ON))) {
+			rinfo->mon1_type = MT_LCD;
+			printk("Non-DDC laptop panel detected\n");
+		}
+		if (rinfo->mon1_type == MT_NONE)
+			rinfo->mon1_type = radeon_crt_is_connected(rinfo, rinfo->reversed_DAC);
+
+		/*
+		 * Probe secondary head (mostly VGA, can be DVI)
+		 */
+#ifdef CONFIG_PPC_OF
+		if (rinfo->mon2_type == MT_NONE)
+			rinfo->mon2_type = radeon_probe_OF_head(rinfo, 1,
+								&rinfo->mon2_EDID);
+#endif /* CONFIG_PPC_OF */
+#ifdef CONFIG_FB_RADEON_I2C
+		if (rinfo->mon2_type == MT_NONE)
+			rinfo->mon2_type = radeon_probe_i2c_connector(rinfo, ddc_vga,
+								      &rinfo->mon2_EDID);
+		if (rinfo->mon2_type == MT_NONE && !ddc_crt2_used)
+			rinfo->mon2_type = radeon_probe_i2c_connector(rinfo, ddc_crt2,
+								      &rinfo->mon2_EDID);
+#endif /* CONFIG_FB_RADEON_I2C */
+		if (rinfo->mon2_type == MT_NONE)
+			rinfo->mon2_type = radeon_crt_is_connected(rinfo, !rinfo->reversed_DAC);
+
+		/*
+		 * If we only detected port 2, we swap them, if none detected,
+		 * assume CRT (maybe fallback to old BIOS_SCRATCH stuff ? or look
+		 * at FP registers ?)
+		 */
+		if (rinfo->mon1_type == MT_NONE) {
+			if (rinfo->mon2_type != MT_NONE) {
+				rinfo->mon1_type = rinfo->mon2_type;
+				rinfo->mon1_EDID = rinfo->mon2_EDID;
+			} else
+				rinfo->mon1_type = MT_CRT;
+			rinfo->mon2_type = MT_NONE;
+			rinfo->mon2_EDID = NULL;
+		}
+
+		/*
+		 * Deal with reversed TMDS
+		 */
+		if (rinfo->reversed_TMDS) {
+			/* Always keep internal TMDS as primary head */
+			if (rinfo->mon1_type == MT_DFP || rinfo->mon2_type == MT_DFP) {
+				int tmp_type = rinfo->mon1_type;
+				u8 *tmp_EDID = rinfo->mon1_EDID;
+				rinfo->mon1_type = rinfo->mon2_type;
+				rinfo->mon1_EDID = rinfo->mon2_EDID;
+				rinfo->mon2_type = tmp_type;
+				rinfo->mon2_EDID = tmp_EDID;
+				if (rinfo->mon1_type == MT_CRT || rinfo->mon2_type == MT_CRT)
+					rinfo->reversed_DAC ^= 1;
+			}
+		}
+	}
+	if (ignore_edid) {
+		kfree(rinfo->mon1_EDID);
+		rinfo->mon1_EDID = NULL;
+		kfree(rinfo->mon2_EDID);
+		rinfo->mon2_EDID = NULL;
+	}
+
+ bail:
+	printk(KERN_INFO "radeonfb: Monitor 1 type %s found\n",
+	       radeon_get_mon_name(rinfo->mon1_type));
+	if (rinfo->mon1_EDID)
+		printk(KERN_INFO "radeonfb: EDID probed\n");
+	if (!rinfo->has_CRTC2)
+		return;
+	printk(KERN_INFO "radeonfb: Monitor 2 type %s found\n",
+	       radeon_get_mon_name(rinfo->mon2_type));
+	if (rinfo->mon2_EDID)
+		printk(KERN_INFO "radeonfb: EDID probed\n");
+}
+
+
+/*
+ * This functions applyes any arch/model/machine specific fixups
+ * to the panel info. It may eventually alter EDID block as
+ * well or whatever is specific to a given model and not probed
+ * properly by the default code
+ */
+static void radeon_fixup_panel_info(struct radeonfb_info *rinfo)
+{
+#ifdef CONFIG_PPC_OF
+	/*
+	 * LCD Flat panels should use fixed dividers, we enfore that on
+	 * PPC only for now...
+	 */
+	if (!rinfo->panel_info.use_bios_dividers && rinfo->mon1_type == MT_LCD
+	    && rinfo->is_mobility) {
+		int ppll_div_sel;
+		u32 ppll_divn;
+		ppll_div_sel = INREG8(CLOCK_CNTL_INDEX + 1) & 0x3;
+		radeon_pll_errata_after_index(rinfo);
+		ppll_divn = INPLL(PPLL_DIV_0 + ppll_div_sel);
+		rinfo->panel_info.ref_divider = rinfo->pll.ref_div;
+		rinfo->panel_info.fbk_divider = ppll_divn & 0x7ff;
+		rinfo->panel_info.post_divider = (ppll_divn >> 16) & 0x7;
+		rinfo->panel_info.use_bios_dividers = 1;
+
+		printk(KERN_DEBUG "radeonfb: Using Firmware dividers 0x%08x "
+		       "from PPLL %d\n",
+		       rinfo->panel_info.fbk_divider |
+		       (rinfo->panel_info.post_divider << 16),
+		       ppll_div_sel);
+	}
+#endif /* CONFIG_PPC_OF */
+}
+
+
+/*
+ * Fill up panel infos from a mode definition, either returned by the EDID
+ * or from the default mode when we can't do any better
+ */
+static void radeon_var_to_panel_info(struct radeonfb_info *rinfo, struct fb_var_screeninfo *var)
+{
+	rinfo->panel_info.xres = var->xres;
+	rinfo->panel_info.yres = var->yres;
+	rinfo->panel_info.clock = 100000000 / var->pixclock;
+	rinfo->panel_info.hOver_plus = var->right_margin;
+	rinfo->panel_info.hSync_width = var->hsync_len;
+       	rinfo->panel_info.hblank = var->left_margin +
+		(var->right_margin + var->hsync_len);
+	rinfo->panel_info.vOver_plus = var->lower_margin;
+	rinfo->panel_info.vSync_width = var->vsync_len;
+       	rinfo->panel_info.vblank = var->upper_margin +
+		(var->lower_margin + var->vsync_len);
+	rinfo->panel_info.hAct_high =
+		(var->sync & FB_SYNC_HOR_HIGH_ACT) != 0;
+	rinfo->panel_info.vAct_high =
+		(var->sync & FB_SYNC_VERT_HIGH_ACT) != 0;
+	rinfo->panel_info.valid = 1;
+	/* We use a default of 200ms for the panel power delay, 
+	 * I need to have a real schedule() instead of mdelay's in the panel code.
+	 * we might be possible to figure out a better power delay either from
+	 * MacOS OF tree or from the EDID block (proprietary extensions ?)
+	 */
+	rinfo->panel_info.pwr_delay = 200;
+}
+
+static void radeon_videomode_to_var(struct fb_var_screeninfo *var,
+				    const struct fb_videomode *mode)
+{
+	var->xres = mode->xres;
+	var->yres = mode->yres;
+	var->xres_virtual = mode->xres;
+	var->yres_virtual = mode->yres;
+	var->xoffset = 0;
+	var->yoffset = 0;
+	var->pixclock = mode->pixclock;
+	var->left_margin = mode->left_margin;
+	var->right_margin = mode->right_margin;
+	var->upper_margin = mode->upper_margin;
+	var->lower_margin = mode->lower_margin;
+	var->hsync_len = mode->hsync_len;
+	var->vsync_len = mode->vsync_len;
+	var->sync = mode->sync;
+	var->vmode = mode->vmode;
+}
+
+/*
+ * Build the modedb for head 1 (head 2 will come later), check panel infos
+ * from either BIOS or EDID, and pick up the default mode
+ */
+void __devinit radeon_check_modes(struct radeonfb_info *rinfo, const char *mode_option)
+{
+	struct fb_info * info = rinfo->info;
+	int has_default_mode = 0;
+
+	/*
+	 * Fill default var first
+	 */
+	info->var = radeonfb_default_var;
+	INIT_LIST_HEAD(&info->modelist);
+
+	/*
+	 * First check out what BIOS has to say
+	 */
+	if (rinfo->mon1_type == MT_LCD)
+		radeon_get_panel_info_BIOS(rinfo);
+
+	/*
+	 * Parse EDID detailed timings and deduce panel infos if any. Right now
+	 * we only deal with first entry returned by parse_EDID, we may do better
+	 * some day...
+	 */
+	if (!rinfo->panel_info.use_bios_dividers && rinfo->mon1_type != MT_CRT
+	    && rinfo->mon1_EDID) {
+		struct fb_var_screeninfo var;
+		RTRACE("Parsing EDID data for panel info\n");
+		if (fb_parse_edid(rinfo->mon1_EDID, &var) == 0) {
+			if (var.xres >= rinfo->panel_info.xres &&
+			    var.yres >= rinfo->panel_info.yres)
+				radeon_var_to_panel_info(rinfo, &var);
+		}
+	}
+
+	/*
+	 * Do any additional platform/arch fixups to the panel infos
+	 */
+	radeon_fixup_panel_info(rinfo);
+
+	/*
+	 * If we have some valid panel infos, we setup the default mode based on
+	 * those
+	 */
+	if (rinfo->mon1_type != MT_CRT && rinfo->panel_info.valid) {
+		struct fb_var_screeninfo *var = &info->var;
+
+		RTRACE("Setting up default mode based on panel info\n");
+		var->xres = rinfo->panel_info.xres;
+		var->yres = rinfo->panel_info.yres;
+		var->xres_virtual = rinfo->panel_info.xres;
+		var->yres_virtual = rinfo->panel_info.yres;
+		var->xoffset = var->yoffset = 0;
+		var->bits_per_pixel = 8;
+		var->pixclock = 100000000 / rinfo->panel_info.clock;
+		var->left_margin = (rinfo->panel_info.hblank - rinfo->panel_info.hOver_plus
+				    - rinfo->panel_info.hSync_width);
+		var->right_margin = rinfo->panel_info.hOver_plus;
+		var->upper_margin = (rinfo->panel_info.vblank - rinfo->panel_info.vOver_plus
+				     - rinfo->panel_info.vSync_width);
+		var->lower_margin = rinfo->panel_info.vOver_plus;
+		var->hsync_len = rinfo->panel_info.hSync_width;
+		var->vsync_len = rinfo->panel_info.vSync_width;
+		var->sync = 0;
+		if (rinfo->panel_info.hAct_high)
+			var->sync |= FB_SYNC_HOR_HIGH_ACT;
+		if (rinfo->panel_info.vAct_high)
+			var->sync |= FB_SYNC_VERT_HIGH_ACT;
+		var->vmode = 0;
+		has_default_mode = 1;
+	}
+
+	/*
+	 * Now build modedb from EDID
+	 */
+	if (rinfo->mon1_EDID) {
+		fb_edid_to_monspecs(rinfo->mon1_EDID, &info->monspecs);
+		fb_videomode_to_modelist(info->monspecs.modedb,
+					 info->monspecs.modedb_len,
+					 &info->modelist);
+		rinfo->mon1_modedb = info->monspecs.modedb;
+		rinfo->mon1_dbsize = info->monspecs.modedb_len;
+	}
+
+	
+	/*
+	 * Finally, if we don't have panel infos we need to figure some (or
+	 * we try to read it from card), we try to pick a default mode
+	 * and create some panel infos. Whatever...
+	 */
+	if (rinfo->mon1_type != MT_CRT && !rinfo->panel_info.valid) {
+		struct fb_videomode	*modedb;
+		int			dbsize;
+		char			modename[32];
+
+		RTRACE("Guessing panel info...\n");
+		if (rinfo->panel_info.xres == 0 || rinfo->panel_info.yres == 0) {
+			u32 tmp = INREG(FP_HORZ_STRETCH) & HORZ_PANEL_SIZE;
+			rinfo->panel_info.xres = ((tmp >> HORZ_PANEL_SHIFT) + 1) * 8;
+			tmp = INREG(FP_VERT_STRETCH) & VERT_PANEL_SIZE;
+			rinfo->panel_info.yres = (tmp >> VERT_PANEL_SHIFT) + 1;
+		}
+		if (rinfo->panel_info.xres == 0 || rinfo->panel_info.yres == 0) {
+			printk(KERN_WARNING "radeonfb: Can't find panel size, going back to CRT\n");
+			rinfo->mon1_type = MT_CRT;
+			goto pickup_default;
+		}
+		printk(KERN_WARNING "radeonfb: Assuming panel size %dx%d\n",
+		       rinfo->panel_info.xres, rinfo->panel_info.yres);
+		modedb = rinfo->mon1_modedb;
+		dbsize = rinfo->mon1_dbsize;
+		snprintf(modename, 31, "%dx%d", rinfo->panel_info.xres, rinfo->panel_info.yres);
+		if (fb_find_mode(&info->var, info, modename,
+				 modedb, dbsize, NULL, 8) == 0) {
+			printk(KERN_WARNING "radeonfb: Can't find mode for panel size, going back to CRT\n");
+			rinfo->mon1_type = MT_CRT;
+			goto pickup_default;
+		}
+		has_default_mode = 1;
+		radeon_var_to_panel_info(rinfo, &info->var);
+	}
+
+ pickup_default:
+	/*
+	 * Apply passed-in mode option if any
+	 */
+	if (mode_option) {
+		if (fb_find_mode(&info->var, info, mode_option,
+				 info->monspecs.modedb,
+				 info->monspecs.modedb_len, NULL, 8) != 0)
+			has_default_mode = 1;
+ 	}
+
+	/*
+	 * Still no mode, let's pick up a default from the db
+	 */
+	if (!has_default_mode && info->monspecs.modedb != NULL) {
+		struct fb_monspecs *specs = &info->monspecs;
+		struct fb_videomode *modedb = NULL;
+
+		/* get preferred timing */
+		if (specs->misc & FB_MISC_1ST_DETAIL) {
+			int i;
+
+			for (i = 0; i < specs->modedb_len; i++) {
+				if (specs->modedb[i].flag & FB_MODE_IS_FIRST) {
+					modedb = &specs->modedb[i];
+					break;
+				}
+			}
+		} else {
+			/* otherwise, get first mode in database */
+			modedb = &specs->modedb[0];
+		}
+		if (modedb != NULL) {
+			info->var.bits_per_pixel = 8;
+			radeon_videomode_to_var(&info->var, modedb);
+			has_default_mode = 1;
+		}
+	}
+	if (1) {
+		struct fb_videomode mode;
+		/* Make sure that whatever mode got selected is actually in the
+		 * modelist or the kernel may die
+		 */
+		fb_var_to_videomode(&mode, &info->var);
+		fb_add_videomode(&mode, &info->modelist);
+	}
+}
+
+/*
+ * The code below is used to pick up a mode in check_var and
+ * set_var. It should be made generic
+ */
+
+/*
+ * This is used when looking for modes. We assign a "distance" value
+ * to a mode in the modedb depending how "close" it is from what we
+ * are looking for.
+ * Currently, we don't compare that much, we could do better but
+ * the current fbcon doesn't quite mind ;)
+ */
+static int radeon_compare_modes(const struct fb_var_screeninfo *var,
+				const struct fb_videomode *mode)
+{
+	int distance = 0;
+
+	distance = mode->yres - var->yres;
+	distance += (mode->xres - var->xres)/2;
+	return distance;
+}
+
+/*
+ * This function is called by check_var, it gets the passed in mode parameter, and
+ * outputs a valid mode matching the passed-in one as closely as possible.
+ * We need something better ultimately. Things like fbcon basically pass us out
+ * current mode with xres/yres hacked, while things like XFree will actually
+ * produce a full timing that we should respect as much as possible.
+ *
+ * This is why I added the FB_ACTIVATE_FIND that is used by fbcon. Without this,
+ * we do a simple spec match, that's all. With it, we actually look for a mode in
+ * either our monitor modedb or the vesa one if none
+ *
+ */
+int  radeon_match_mode(struct radeonfb_info *rinfo,
+		       struct fb_var_screeninfo *dest,
+		       const struct fb_var_screeninfo *src)
+{
+	const struct fb_videomode	*db = vesa_modes;
+	int				i, dbsize = 34;
+	int				has_rmx, native_db = 0;
+	int				distance = INT_MAX;
+	const struct fb_videomode	*candidate = NULL;
+
+	/* Start with a copy of the requested mode */
+	memcpy(dest, src, sizeof(struct fb_var_screeninfo));
+
+	/* Check if we have a modedb built from EDID */
+	if (rinfo->mon1_modedb) {
+		db = rinfo->mon1_modedb;
+		dbsize = rinfo->mon1_dbsize;
+		native_db = 1;
+	}
+
+	/* Check if we have a scaler allowing any fancy mode */
+	has_rmx = rinfo->mon1_type == MT_LCD || rinfo->mon1_type == MT_DFP;
+
+	/* If we have a scaler and are passed FB_ACTIVATE_TEST or
+	 * FB_ACTIVATE_NOW, just do basic checking and return if the
+	 * mode match
+	 */
+	if ((src->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_TEST ||
+	    (src->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW) {
+		/* We don't have an RMX, validate timings. If we don't have
+	 	 * monspecs, we should be paranoid and not let use go above
+		 * 640x480-60, but I assume userland knows what it's doing here
+		 * (though I may be proven wrong...)
+		 */
+		if (has_rmx == 0 && rinfo->mon1_modedb)
+			if (fb_validate_mode((struct fb_var_screeninfo *)src, rinfo->info))
+				return -EINVAL;
+		return 0;
+	}
+
+	/* Now look for a mode in the database */
+	while (db) {
+		for (i = 0; i < dbsize; i++) {
+			int d;
+
+			if (db[i].yres < src->yres)
+				continue;	
+			if (db[i].xres < src->xres)
+				continue;
+			d = radeon_compare_modes(src, &db[i]);
+			/* If the new mode is at least as good as the previous one,
+			 * then it's our new candidate
+			 */
+			if (d < distance) {
+				candidate = &db[i];
+				distance = d;
+			}
+		}
+		db = NULL;
+		/* If we have a scaler, we allow any mode from the database */
+		if (native_db && has_rmx) {
+			db = vesa_modes;
+			dbsize = 34;
+			native_db = 0;
+		}
+	}
+
+	/* If we have found a match, return it */
+	if (candidate != NULL) {
+		radeon_videomode_to_var(dest, candidate);
+		return 0;
+	}
+
+	/* If we haven't and don't have a scaler, fail */
+	if (!has_rmx)
+		return -EINVAL;
+
+	return 0;
+}