Merge branch 'depends/tty' into next/headers

Merging in Greg's tty tree including a cleanup patch needed by the OMAP serial
header cleanups.

* depends/tty: (305 commits)
  tty/serial/8250: Make omap hardware workarounds local to 8250.h
  serial/8250/8250_early: Prevent rounding error in uartclk
  serial: samsung: use clk_prepare_enable and clk_disable_unprepare
  TTY: Report warning when low_latency flag is wrongly used
  console: use might_sleep in console_lock
  TTY: move tty buffers to tty_port
  TTY: add port -> tty link
  TTY: tty_buffer, cache pointer to tty->buf
  TTY: move TTY_FLUSH* flags to tty_port
  TTY: n_tty, propagate n_tty_data
  TTY: move ldisc data from tty_struct: locks
  TTY: move ldisc data from tty_struct: read_* and echo_* and canon_* stuff
  TTY: move ldisc data from tty_struct: bitmaps
  TTY: move ldisc data from tty_struct: simple members
  TTY: n_tty, add ldisc data to n_tty
  TTY: audit, stop accessing tty->icount
  TTY: n_tty, remove bogus checks
  TTY: n_tty, simplify read_buf+echo_buf allocation
  TTY: hci_ldisc, remove invalid check in open
  TTY: ldisc, wait for idle ldisc in release
  ...

36 files changed, 608 insertions, 554 deletions

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 981f2132d128..6e49ec6f3adc 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -817,10 +817,6 @@ static const __u32 acm_tty_speed[] = {
 	2500000, 3000000, 3500000, 4000000
 };
 
-static const __u8 acm_tty_size[] = {
-	5, 6, 7, 8
-};
-
 static void acm_tty_set_termios(struct tty_struct *tty,
 						struct ktermios *termios_old)
 {
@@ -834,7 +830,21 @@ static void acm_tty_set_termios(struct tty_struct *tty,
 	newline.bParityType = termios->c_cflag & PARENB ?
 				(termios->c_cflag & PARODD ? 1 : 2) +
 				(termios->c_cflag & CMSPAR ? 2 : 0) : 0;
-	newline.bDataBits = acm_tty_size[(termios->c_cflag & CSIZE) >> 4];
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		newline.bDataBits = 5;
+		break;
+	case CS6:
+		newline.bDataBits = 6;
+		break;
+	case CS7:
+		newline.bDataBits = 7;
+		break;
+	case CS8:
+	default:
+		newline.bDataBits = 8;
+		break;
+	}
 	/* FIXME: Needs to clear unsupported bits in the termios */
 	acm->clocal = ((termios->c_cflag & CLOCAL) != 0);
 
@@ -1233,7 +1243,7 @@ made_compressed_probe:
 
 		if (usb_endpoint_xfer_int(epwrite))
 			usb_fill_int_urb(snd->urb, usb_dev,
-				usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
+				usb_sndintpipe(usb_dev, epwrite->bEndpointAddress),
 				NULL, acm->writesize, acm_write_bulk, snd, epwrite->bInterval);
 		else
 			usb_fill_bulk_urb(snd->urb, usb_dev,
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index e0356cb859b5..b78fbe222b72 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1348,6 +1348,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 					ret = -EFAULT;
 					goto error;
 				}
+				uurb->buffer += u;
 			}
 			totlen -= u;
 		}
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index ddd820d25288..6056db7af410 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -367,6 +367,10 @@ static int usb_probe_interface(struct device *dev)
 	intf->condition = USB_INTERFACE_UNBOUND;
 	usb_cancel_queued_reset(intf);
 
+	/* If the LPM disable succeeded, balance the ref counts. */
+	if (!lpm_disable_error)
+		usb_unlocked_enable_lpm(udev);
+
 	/* Unbound interfaces are always runtime-PM-disabled and -suspended */
 	if (driver->supports_autosuspend)
 		pm_runtime_disable(dev);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 673ee4696262..64854d76f529 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3241,8 +3241,7 @@ static int usb_req_set_sel(struct usb_device *udev, enum usb3_link_state state)
 			(state == USB3_LPM_U2 &&
 			 (u2_sel > USB3_LPM_MAX_U2_SEL_PEL ||
 			  u2_pel > USB3_LPM_MAX_U2_SEL_PEL))) {
-		dev_dbg(&udev->dev, "Device-initiated %s disabled due "
-				"to long SEL %llu ms or PEL %llu ms\n",
+		dev_dbg(&udev->dev, "Device-initiated %s disabled due to long SEL %llu us or PEL %llu us\n",
 				usb3_lpm_names[state], u1_sel, u1_pel);
 		return -EINVAL;
 	}
@@ -3320,16 +3319,6 @@ static int usb_set_device_initiated_lpm(struct usb_device *udev,
 
 	if (enable) {
 		/*
-		 * First, let the device know about the exit latencies
-		 * associated with the link state we're about to enable.
-		 */
-		ret = usb_req_set_sel(udev, state);
-		if (ret < 0) {
-			dev_warn(&udev->dev, "Set SEL for device-initiated "
-					"%s failed.\n", usb3_lpm_names[state]);
-			return -EBUSY;
-		}
-		/*
 		 * Now send the control transfer to enable device-initiated LPM
 		 * for either U1 or U2.
 		 */
@@ -3414,7 +3403,28 @@ static int usb_set_lpm_timeout(struct usb_device *udev,
 static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
 		enum usb3_link_state state)
 {
-	int timeout;
+	int timeout, ret;
+	__u8 u1_mel = udev->bos->ss_cap->bU1devExitLat;
+	__le16 u2_mel = udev->bos->ss_cap->bU2DevExitLat;
+
+	/* If the device says it doesn't have *any* exit latency to come out of
+	 * U1 or U2, it's probably lying.  Assume it doesn't implement that link
+	 * state.
+	 */
+	if ((state == USB3_LPM_U1 && u1_mel == 0) ||
+			(state == USB3_LPM_U2 && u2_mel == 0))
+		return;
+
+	/*
+	 * First, let the device know about the exit latencies
+	 * associated with the link state we're about to enable.
+	 */
+	ret = usb_req_set_sel(udev, state);
+	if (ret < 0) {
+		dev_warn(&udev->dev, "Set SEL for device-initiated %s failed.\n",
+				usb3_lpm_names[state]);
+		return;
+	}
 
 	/* We allow the host controller to set the U1/U2 timeout internally
 	 * first, so that it can change its schedule to account for the
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index b415c0c859d3..c14ebc975ba4 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -409,6 +409,10 @@ static void dwc3_core_exit(struct dwc3 *dwc)
 {
 	dwc3_event_buffers_cleanup(dwc);
 	dwc3_free_event_buffers(dwc);
+
+	usb_phy_shutdown(dwc->usb2_phy);
+	usb_phy_shutdown(dwc->usb3_phy);
+
 }
 
 #define DWC3_ALIGN_MASK		(16 - 1)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index c9e729a4bf65..7b7deddf6a52 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1904,7 +1904,7 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum)
 	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
 	WARN_ON_ONCE(ret);
 	dep->resource_index = 0;
-
+	dep->flags &= ~DWC3_EP_BUSY;
 	udelay(100);
 }
 
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index dfb51a45496c..e0ff51b89529 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -952,6 +952,7 @@ endif
 config USB_G_WEBCAM
 	tristate "USB Webcam Gadget"
 	depends on VIDEO_DEV
+	select USB_LIBCOMPOSITE
 	help
 	  The Webcam Gadget acts as a composite USB Audio and Video Class
 	  device. It provides a userspace API to process UVC control requests
diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
index f696fb9b136d..21a9861dabf0 100644
--- a/drivers/usb/gadget/lpc32xx_udc.c
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@@ -2930,10 +2930,10 @@ static void vbus_work(struct work_struct *work)
 
 		/* Get the VBUS status from the transceiver */
 		value = i2c_smbus_read_byte_data(udc->isp1301_i2c_client,
-						 ISP1301_I2C_OTG_CONTROL_2);
+						 ISP1301_I2C_INTERRUPT_SOURCE);
 
 		/* VBUS on or off? */
-		if (value & OTG_B_SESS_VLD)
+		if (value & INT_SESS_VLD)
 			udc->vbus = 1;
 		else
 			udc->vbus = 0;
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 9bfde82078ec..0d2f35ca93f1 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -222,7 +222,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
 
 	if (pdata->controller_ver < 0) {
 		dev_warn(hcd->self.controller, "Could not get controller version\n");
-		return;
+		return -ENODEV;
 	}
 
 	portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 8e7eca62f169..9c2717d66730 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -160,7 +160,7 @@ static const struct hc_driver ehci_orion_hc_driver = {
 	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 };
 
-static void __init
+static void __devinit
 ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
 			     const struct mbus_dram_target_info *dram)
 {
diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c
index 96722bfebc84..d3c9a3e397b9 100644
--- a/drivers/usb/host/ehci-vt8500.c
+++ b/drivers/usb/host/ehci-vt8500.c
@@ -85,6 +85,8 @@ static const struct hc_driver vt8500_ehci_hc_driver = {
 	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };
 
+static u64 vt8500_ehci_dma_mask = DMA_BIT_MASK(32);
+
 static int vt8500_ehci_drv_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd;
@@ -95,6 +97,14 @@ static int vt8500_ehci_drv_probe(struct platform_device *pdev)
 	if (usb_disabled())
 		return -ENODEV;
 
+	/*
+	 * Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &vt8500_ehci_dma_mask;
+
 	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
 		pr_debug("resource[1] is not IORESOURCE_IRQ");
 		return -ENOMEM;
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index e4780491df4a..68ebf20e1519 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -60,6 +60,7 @@ static const struct hc_driver uhci_platform_hc_driver = {
 	.hub_control =		uhci_hub_control,
 };
 
+static u64 platform_uhci_dma_mask = DMA_BIT_MASK(32);
 
 static int __devinit uhci_hcd_platform_probe(struct platform_device *pdev)
 {
@@ -71,6 +72,14 @@ static int __devinit uhci_hcd_platform_probe(struct platform_device *pdev)
 	if (usb_disabled())
 		return -ENODEV;
 
+	/*
+	 * Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &platform_uhci_dma_mask;
+
 	hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev,
 			pdev->name);
 	if (!hcd)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 8d7fcbbe6ade..7d462bf20092 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -479,7 +479,8 @@ static bool compliance_mode_recovery_timer_quirk_check(void)
 
 	if (strstr(dmi_product_name, "Z420") ||
 			strstr(dmi_product_name, "Z620") ||
-			strstr(dmi_product_name, "Z820"))
+			strstr(dmi_product_name, "Z820") ||
+			strstr(dmi_product_name, "Z1"))
 		return true;
 
 	return false;
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 457f25e62c51..c964d6af178b 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -305,6 +305,12 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
 		ret = IRQ_HANDLED;
 	}
 
+	/* Drop spurious RX and TX if device is disconnected */
+	if (musb->int_usb & MUSB_INTR_DISCONNECT) {
+		musb->int_tx = 0;
+		musb->int_rx = 0;
+	}
+
 	if (musb->int_tx || musb->int_rx || musb->int_usb)
 		ret |= musb_interrupt(musb);
 
diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c
index 35c5208f3249..61933a90e5bf 100644
--- a/drivers/usb/renesas_usbhs/mod.c
+++ b/drivers/usb/renesas_usbhs/mod.c
@@ -273,9 +273,9 @@ static irqreturn_t usbhs_interrupt(int irq, void *data)
 	usbhs_write(priv, INTSTS0, ~irq_state.intsts0 & INTSTS0_MAGIC);
 	usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC);
 
-	usbhs_write(priv, BRDYSTS, 0);
-	usbhs_write(priv, NRDYSTS, 0);
-	usbhs_write(priv, BEMPSTS, 0);
+	usbhs_write(priv, BRDYSTS, ~irq_state.brdysts);
+	usbhs_write(priv, NRDYSTS, ~irq_state.nrdysts);
+	usbhs_write(priv, BEMPSTS, ~irq_state.bempsts);
 
 	/*
 	 * call irq callback functions
diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h
index 08786c06dcf1..3d80c7b1fd1b 100644
--- a/drivers/usb/renesas_usbhs/pipe.h
+++ b/drivers/usb/renesas_usbhs/pipe.h
@@ -54,7 +54,7 @@ struct usbhs_pipe_info {
  * pipe list
  */
 #define __usbhs_for_each_pipe(start, pos, info, i)	\
-	for (i = start, pos = (info)->pipe;		\
+	for (i = start, pos = (info)->pipe + i;		\
 	     i < (info)->size;				\
 	     i++, pos = (info)->pipe + i)
 
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index cf2522c397d3..bd50a8a41a0f 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -125,9 +125,6 @@ static inline int calc_divisor(int bps)
 
 static int ark3116_attach(struct usb_serial *serial)
 {
-	struct usb_serial_port *port = serial->port[0];
-	struct ark3116_private *priv;
-
 	/* make sure we have our end-points */
 	if ((serial->num_bulk_in == 0) ||
 	    (serial->num_bulk_out == 0) ||
@@ -142,8 +139,15 @@ static int ark3116_attach(struct usb_serial *serial)
 		return -EINVAL;
 	}
 
-	priv = kzalloc(sizeof(struct ark3116_private),
-		       GFP_KERNEL);
+	return 0;
+}
+
+static int ark3116_port_probe(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct ark3116_private *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
@@ -198,18 +202,15 @@ static int ark3116_attach(struct usb_serial *serial)
 	return 0;
 }
 
-static void ark3116_release(struct usb_serial *serial)
+static int ark3116_port_remove(struct usb_serial_port *port)
 {
-	struct usb_serial_port *port = serial->port[0];
 	struct ark3116_private *priv = usb_get_serial_port_data(port);
 
 	/* device is closed, so URBs and DMA should be down */
-
-	usb_set_serial_port_data(port, NULL);
-
 	mutex_destroy(&priv->hw_lock);
-
 	kfree(priv);
+
+	return 0;
 }
 
 static void ark3116_init_termios(struct tty_struct *tty)
@@ -723,7 +724,8 @@ static struct usb_serial_driver ark3116_device = {
 	.id_table =		id_table,
 	.num_ports =		1,
 	.attach =		ark3116_attach,
-	.release =		ark3116_release,
+	.port_probe =		ark3116_port_probe,
+	.port_remove =		ark3116_port_remove,
 	.set_termios =		ark3116_set_termios,
 	.init_termios =		ark3116_init_termios,
 	.ioctl =		ark3116_ioctl,
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 99449424193f..ea29556f0d72 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -45,8 +45,8 @@
 #define DRIVER_DESC "USB Belkin Serial converter driver"
 
 /* function prototypes for a Belkin USB Serial Adapter F5U103 */
-static int  belkin_sa_startup(struct usb_serial *serial);
-static void belkin_sa_release(struct usb_serial *serial);
+static int belkin_sa_port_probe(struct usb_serial_port *port);
+static int belkin_sa_port_remove(struct usb_serial_port *port);
 static int  belkin_sa_open(struct tty_struct *tty,
 			struct usb_serial_port *port);
 static void belkin_sa_close(struct usb_serial_port *port);
@@ -88,8 +88,8 @@ static struct usb_serial_driver belkin_device = {
 	.break_ctl =		belkin_sa_break_ctl,
 	.tiocmget =		belkin_sa_tiocmget,
 	.tiocmset =		belkin_sa_tiocmset,
-	.attach =		belkin_sa_startup,
-	.release =		belkin_sa_release,
+	.port_probe =		belkin_sa_port_probe,
+	.port_remove =		belkin_sa_port_remove,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
@@ -118,17 +118,15 @@ struct belkin_sa_private {
 					    (c), BELKIN_SA_SET_REQUEST_TYPE, \
 					    (v), 0, NULL, 0, WDR_TIMEOUT)
 
-/* do some startup allocations not currently performed by usb_serial_probe() */
-static int belkin_sa_startup(struct usb_serial *serial)
+static int belkin_sa_port_probe(struct usb_serial_port *port)
 {
-	struct usb_device *dev = serial->dev;
+	struct usb_device *dev = port->serial->dev;
 	struct belkin_sa_private *priv;
 
-	/* allocate the private data structure */
 	priv = kmalloc(sizeof(struct belkin_sa_private), GFP_KERNEL);
 	if (!priv)
-		return -1; /* error */
-	/* set initial values for control structures */
+		return -ENOMEM;
+
 	spin_lock_init(&priv->lock);
 	priv->control_state = 0;
 	priv->last_lsr = 0;
@@ -140,18 +138,19 @@ static int belkin_sa_startup(struct usb_serial *serial)
 					le16_to_cpu(dev->descriptor.bcdDevice),
 					priv->bad_flow_control);
 
-	init_waitqueue_head(&serial->port[0]->write_wait);
-	usb_set_serial_port_data(serial->port[0], priv);
+	usb_set_serial_port_data(port, priv);
 
 	return 0;
 }
 
-static void belkin_sa_release(struct usb_serial *serial)
+static int belkin_sa_port_remove(struct usb_serial_port *port)
 {
-	int i;
+	struct belkin_sa_private *priv;
 
-	for (i = 0; i < serial->num_ports; ++i)
-		kfree(usb_get_serial_port_data(serial->port[i]));
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
 }
 
 static int belkin_sa_open(struct tty_struct *tty,
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 28af5acc3360..eb033fc92a15 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -162,7 +162,7 @@ static const struct usb_device_id id_table[] = {
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
-struct cp210x_port_private {
+struct cp210x_serial_private {
 	__u8			bInterfaceNumber;
 };
 
@@ -276,7 +276,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
-	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	struct cp210x_serial_private *spriv = usb_get_serial_data(serial);
 	__le32 *buf;
 	int result, i, length;
 
@@ -292,7 +292,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
 	/* Issue the request, attempting to read 'size' bytes */
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 				request, REQTYPE_INTERFACE_TO_HOST, 0x0000,
-				port_priv->bInterfaceNumber, buf, size,
+				spriv->bInterfaceNumber, buf, size,
 				USB_CTRL_GET_TIMEOUT);
 
 	/* Convert data into an array of integers */
@@ -323,7 +323,7 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
-	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	struct cp210x_serial_private *spriv = usb_get_serial_data(serial);
 	__le32 *buf;
 	int result, i, length;
 
@@ -345,13 +345,13 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0),
 				request, REQTYPE_HOST_TO_INTERFACE, 0x0000,
-				port_priv->bInterfaceNumber, buf, size,
+				spriv->bInterfaceNumber, buf, size,
 				USB_CTRL_SET_TIMEOUT);
 	} else {
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0),
 				request, REQTYPE_HOST_TO_INTERFACE, data[0],
-				port_priv->bInterfaceNumber, NULL, 0,
+				spriv->bInterfaceNumber, NULL, 0,
 				USB_CTRL_SET_TIMEOUT);
 	}
 
@@ -845,36 +845,30 @@ static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
 
 static int cp210x_startup(struct usb_serial *serial)
 {
-	struct cp210x_port_private *port_priv;
-	int i;
+	struct usb_host_interface *cur_altsetting;
+	struct cp210x_serial_private *spriv;
 
 	/* cp210x buffers behave strangely unless device is reset */
 	usb_reset_device(serial->dev);
 
-	for (i = 0; i < serial->num_ports; i++) {
-		port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
-		if (!port_priv)
-			return -ENOMEM;
+	spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
+	if (!spriv)
+		return -ENOMEM;
 
-		port_priv->bInterfaceNumber =
-		    serial->interface->cur_altsetting->desc.bInterfaceNumber;
+	cur_altsetting = serial->interface->cur_altsetting;
+	spriv->bInterfaceNumber = cur_altsetting->desc.bInterfaceNumber;
 
-		usb_set_serial_port_data(serial->port[i], port_priv);
-	}
+	usb_set_serial_data(serial, spriv);
 
 	return 0;
 }
 
 static void cp210x_release(struct usb_serial *serial)
 {
-	struct cp210x_port_private *port_priv;
-	int i;
+	struct cp210x_serial_private *spriv;
 
-	for (i = 0; i < serial->num_ports; i++) {
-		port_priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(port_priv);
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
+	spriv = usb_get_serial_data(serial);
+	kfree(spriv);
 }
 
 module_usb_serial_driver(serial_drivers, id_table);
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 2a7aecc72237..4ee77dcbe690 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -55,9 +55,9 @@
 #define CYBERJACK_PRODUCT_ID	0x0100
 
 /* Function prototypes */
-static int cyberjack_startup(struct usb_serial *serial);
 static void cyberjack_disconnect(struct usb_serial *serial);
-static void cyberjack_release(struct usb_serial *serial);
+static int cyberjack_port_probe(struct usb_serial_port *port);
+static int cyberjack_port_remove(struct usb_serial_port *port);
 static int  cyberjack_open(struct tty_struct *tty,
 	struct usb_serial_port *port);
 static void cyberjack_close(struct usb_serial_port *port);
@@ -83,9 +83,9 @@ static struct usb_serial_driver cyberjack_device = {
 	.description =		"Reiner SCT Cyberjack USB card reader",
 	.id_table =		id_table,
 	.num_ports =		1,
-	.attach =		cyberjack_startup,
 	.disconnect =		cyberjack_disconnect,
-	.release =		cyberjack_release,
+	.port_probe =		cyberjack_port_probe,
+	.port_remove =		cyberjack_port_remove,
 	.open =			cyberjack_open,
 	.close =		cyberjack_close,
 	.write =		cyberjack_write,
@@ -107,56 +107,45 @@ struct cyberjack_private {
 	short		wrsent;		/* Data already sent */
 };
 
-/* do some startup allocations not currently performed by usb_serial_probe() */
-static int cyberjack_startup(struct usb_serial *serial)
+static int cyberjack_port_probe(struct usb_serial_port *port)
 {
 	struct cyberjack_private *priv;
-	int i;
+	int result;
 
-	/* allocate the private data structure */
 	priv = kmalloc(sizeof(struct cyberjack_private), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
-	/* set initial values */
 	spin_lock_init(&priv->lock);
 	priv->rdtodo = 0;
 	priv->wrfilled = 0;
 	priv->wrsent = 0;
-	usb_set_serial_port_data(serial->port[0], priv);
 
-	init_waitqueue_head(&serial->port[0]->write_wait);
+	usb_set_serial_port_data(port, priv);
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		int result;
-		result = usb_submit_urb(serial->port[i]->interrupt_in_urb,
-					GFP_KERNEL);
-		if (result)
-			dev_err(&serial->dev->dev,
-				"usb_submit_urb(read int) failed\n");
-		dev_dbg(&serial->dev->dev, "%s - usb_submit_urb(int urb)\n",
-			__func__);
-	}
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+	if (result)
+		dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
 
 	return 0;
 }
 
-static void cyberjack_disconnect(struct usb_serial *serial)
+static int cyberjack_port_remove(struct usb_serial_port *port)
 {
-	int i;
+	struct cyberjack_private *priv;
 
-	for (i = 0; i < serial->num_ports; ++i)
-		usb_kill_urb(serial->port[i]->interrupt_in_urb);
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
 }
 
-static void cyberjack_release(struct usb_serial *serial)
+static void cyberjack_disconnect(struct usb_serial *serial)
 {
 	int i;
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		/* My special items, the standard routines free my urbs */
-		kfree(usb_get_serial_port_data(serial->port[i]));
-	}
+	for (i = 0; i < serial->num_ports; ++i)
+		usb_kill_urb(serial->port[i]->interrupt_in_urb);
 }
 
 static int  cyberjack_open(struct tty_struct *tty,
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 1befce21e173..f0da1279c114 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -123,10 +123,10 @@ struct cypress_private {
 };
 
 /* function prototypes for the Cypress USB to serial device */
-static int  cypress_earthmate_startup(struct usb_serial *serial);
-static int  cypress_hidcom_startup(struct usb_serial *serial);
-static int  cypress_ca42v2_startup(struct usb_serial *serial);
-static void cypress_release(struct usb_serial *serial);
+static int  cypress_earthmate_port_probe(struct usb_serial_port *port);
+static int  cypress_hidcom_port_probe(struct usb_serial_port *port);
+static int  cypress_ca42v2_port_probe(struct usb_serial_port *port);
+static int  cypress_port_remove(struct usb_serial_port *port);
 static int  cypress_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void cypress_close(struct usb_serial_port *port);
 static void cypress_dtr_rts(struct usb_serial_port *port, int on);
@@ -156,8 +156,8 @@ static struct usb_serial_driver cypress_earthmate_device = {
 	.description =			"DeLorme Earthmate USB",
 	.id_table =			id_table_earthmate,
 	.num_ports =			1,
-	.attach =			cypress_earthmate_startup,
-	.release =			cypress_release,
+	.port_probe =			cypress_earthmate_port_probe,
+	.port_remove =			cypress_port_remove,
 	.open =				cypress_open,
 	.close =			cypress_close,
 	.dtr_rts =			cypress_dtr_rts,
@@ -182,8 +182,8 @@ static struct usb_serial_driver cypress_hidcom_device = {
 	.description =			"HID->COM RS232 Adapter",
 	.id_table =			id_table_cyphidcomrs232,
 	.num_ports =			1,
-	.attach =			cypress_hidcom_startup,
-	.release =			cypress_release,
+	.port_probe =			cypress_hidcom_port_probe,
+	.port_remove =			cypress_port_remove,
 	.open =				cypress_open,
 	.close =			cypress_close,
 	.dtr_rts =			cypress_dtr_rts,
@@ -208,8 +208,8 @@ static struct usb_serial_driver cypress_ca42v2_device = {
 	.description =			"Nokia CA-42 V2 Adapter",
 	.id_table =			id_table_nokiaca42v2,
 	.num_ports =			1,
-	.attach =			cypress_ca42v2_startup,
-	.release =			cypress_release,
+	.port_probe =			cypress_ca42v2_port_probe,
+	.port_remove =			cypress_port_remove,
 	.open =				cypress_open,
 	.close =			cypress_close,
 	.dtr_rts =			cypress_dtr_rts,
@@ -438,10 +438,10 @@ static void cypress_set_dead(struct usb_serial_port *port)
  *****************************************************************************/
 
 
-static int generic_startup(struct usb_serial *serial)
+static int cypress_generic_port_probe(struct usb_serial_port *port)
 {
+	struct usb_serial *serial = port->serial;
 	struct cypress_private *priv;
-	struct usb_serial_port *port = serial->port[0];
 
 	priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
 	if (!priv)
@@ -490,14 +490,16 @@ static int generic_startup(struct usb_serial *serial)
 }
 
 
-static int cypress_earthmate_startup(struct usb_serial *serial)
+static int cypress_earthmate_port_probe(struct usb_serial_port *port)
 {
+	struct usb_serial *serial = port->serial;
 	struct cypress_private *priv;
-	struct usb_serial_port *port = serial->port[0];
+	int ret;
 
-	if (generic_startup(serial)) {
+	ret = cypress_generic_port_probe(port);
+	if (ret) {
 		dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
-		return 1;
+		return ret;
 	}
 
 	priv = usb_get_serial_port_data(port);
@@ -518,56 +520,53 @@ static int cypress_earthmate_startup(struct usb_serial *serial)
 	}
 
 	return 0;
-} /* cypress_earthmate_startup */
-
+}
 
-static int cypress_hidcom_startup(struct usb_serial *serial)
+static int cypress_hidcom_port_probe(struct usb_serial_port *port)
 {
 	struct cypress_private *priv;
-	struct usb_serial_port *port = serial->port[0];
+	int ret;
 
-	if (generic_startup(serial)) {
+	ret = cypress_generic_port_probe(port);
+	if (ret) {
 		dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
-		return 1;
+		return ret;
 	}
 
 	priv = usb_get_serial_port_data(port);
 	priv->chiptype = CT_CYPHIDCOM;
 
 	return 0;
-} /* cypress_hidcom_startup */
-
+}
 
-static int cypress_ca42v2_startup(struct usb_serial *serial)
+static int cypress_ca42v2_port_probe(struct usb_serial_port *port)
 {
 	struct cypress_private *priv;
-	struct usb_serial_port *port = serial->port[0];
+	int ret;
 
-	if (generic_startup(serial)) {
+	ret = cypress_generic_port_probe(port);
+	if (ret) {
 		dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
-		return 1;
+		return ret;
 	}
 
 	priv = usb_get_serial_port_data(port);
 	priv->chiptype = CT_CA42V2;
 
 	return 0;
-} /* cypress_ca42v2_startup */
-
+}
 
-static void cypress_release(struct usb_serial *serial)
+static int cypress_port_remove(struct usb_serial_port *port)
 {
 	struct cypress_private *priv;
 
-	/* all open ports are closed at this point */
-	priv = usb_get_serial_port_data(serial->port[0]);
+	priv = usb_get_serial_port_data(port);
 
-	if (priv) {
-		kfifo_free(&priv->write_fifo);
-		kfree(priv);
-	}
-}
+	kfifo_free(&priv->write_fifo);
+	kfree(priv);
 
+	return 0;
+}
 
 static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 244477107e2f..6e4eb57d0177 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -318,39 +318,30 @@ static int f81232_ioctl(struct tty_struct *tty,
 	return -ENOIOCTLCMD;
 }
 
-static int f81232_startup(struct usb_serial *serial)
+static int f81232_port_probe(struct usb_serial_port *port)
 {
 	struct f81232_private *priv;
-	int i;
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		priv = kzalloc(sizeof(struct f81232_private), GFP_KERNEL);
-		if (!priv)
-			goto cleanup;
-		spin_lock_init(&priv->lock);
-		init_waitqueue_head(&priv->delta_msr_wait);
-		usb_set_serial_port_data(serial->port[i], priv);
-	}
-	return 0;
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
 
-cleanup:
-	for (--i; i >= 0; --i) {
-		priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(priv);
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
-	return -ENOMEM;
+	spin_lock_init(&priv->lock);
+	init_waitqueue_head(&priv->delta_msr_wait);
+
+	usb_set_serial_port_data(port, priv);
+
+	return 0;
 }
 
-static void f81232_release(struct usb_serial *serial)
+static int f81232_port_remove(struct usb_serial_port *port)
 {
-	int i;
 	struct f81232_private *priv;
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(priv);
-	}
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
 }
 
 static struct usb_serial_driver f81232_device = {
@@ -373,8 +364,8 @@ static struct usb_serial_driver f81232_device = {
 	.tiocmset =		f81232_tiocmset,
 	.process_read_urb =	f81232_process_read_urb,
 	.read_int_callback =	f81232_read_int_callback,
-	.attach =		f81232_startup,
-	.release =		f81232_release,
+	.port_probe =		f81232_port_probe,
+	.port_remove =		f81232_port_remove,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 3ee92648c02d..203358d7e7bc 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1405,11 +1405,10 @@ static void timeout_handler(unsigned long data)
 
 
 
-static int garmin_attach(struct usb_serial *serial)
+static int garmin_port_probe(struct usb_serial_port *port)
 {
-	int status = 0;
-	struct usb_serial_port *port = serial->port[0];
-	struct garmin_data *garmin_data_p = NULL;
+	int status;
+	struct garmin_data *garmin_data_p;
 
 	garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL);
 	if (garmin_data_p == NULL) {
@@ -1434,22 +1433,14 @@ static int garmin_attach(struct usb_serial *serial)
 }
 
 
-static void garmin_disconnect(struct usb_serial *serial)
+static int garmin_port_remove(struct usb_serial_port *port)
 {
-	struct usb_serial_port *port = serial->port[0];
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 
 	usb_kill_urb(port->interrupt_in_urb);
 	del_timer_sync(&garmin_data_p->timer);
-}
-
-
-static void garmin_release(struct usb_serial *serial)
-{
-	struct usb_serial_port *port = serial->port[0];
-	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
-
 	kfree(garmin_data_p);
+	return 0;
 }
 
 
@@ -1466,9 +1457,8 @@ static struct usb_serial_driver garmin_device = {
 	.close               = garmin_close,
 	.throttle            = garmin_throttle,
 	.unthrottle          = garmin_unthrottle,
-	.attach              = garmin_attach,
-	.disconnect          = garmin_disconnect,
-	.release             = garmin_release,
+	.port_probe		= garmin_port_probe,
+	.port_remove		= garmin_port_remove,
 	.write               = garmin_write,
 	.write_room          = garmin_write_room,
 	.write_bulk_callback = garmin_write_bulk_callback,
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 8e6faaf3580c..5acc0d13864a 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -225,6 +225,8 @@ static int  edge_get_icount(struct tty_struct *tty,
 static int  edge_startup(struct usb_serial *serial);
 static void edge_disconnect(struct usb_serial *serial);
 static void edge_release(struct usb_serial *serial);
+static int edge_port_probe(struct usb_serial_port *port);
+static int edge_port_remove(struct usb_serial_port *port);
 
 #include "io_tables.h"	/* all of the devices that this driver supports */
 
@@ -2875,10 +2877,9 @@ static void load_application_firmware(struct edgeport_serial *edge_serial)
 static int edge_startup(struct usb_serial *serial)
 {
 	struct edgeport_serial *edge_serial;
-	struct edgeport_port *edge_port;
 	struct usb_device *dev;
 	struct device *ddev = &serial->dev->dev;
-	int i, j;
+	int i;
 	int response;
 	bool interrupt_in_found;
 	bool bulk_in_found;
@@ -2961,25 +2962,6 @@ static int edge_startup(struct usb_serial *serial)
 	/* we set up the pointers to the endpoints in the edge_open function,
 	 * as the structures aren't created yet. */
 
-	/* set up our port private structures */
-	for (i = 0; i < serial->num_ports; ++i) {
-		edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL);
-		if (edge_port == NULL) {
-			dev_err(ddev, "%s - Out of memory\n", __func__);
-			for (j = 0; j < i; ++j) {
-				kfree(usb_get_serial_port_data(serial->port[j]));
-				usb_set_serial_port_data(serial->port[j],
-									NULL);
-			}
-			usb_set_serial_data(serial, NULL);
-			kfree(edge_serial);
-			return -ENOMEM;
-		}
-		spin_lock_init(&edge_port->ep_lock);
-		edge_port->port = serial->port[i];
-		usb_set_serial_port_data(serial->port[i], edge_port);
-	}
-
 	response = 0;
 
 	if (edge_serial->is_epic) {
@@ -3120,14 +3102,36 @@ static void edge_disconnect(struct usb_serial *serial)
 static void edge_release(struct usb_serial *serial)
 {
 	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
-	int i;
-
-	for (i = 0; i < serial->num_ports; ++i)
-		kfree(usb_get_serial_port_data(serial->port[i]));
 
 	kfree(edge_serial);
 }
 
+static int edge_port_probe(struct usb_serial_port *port)
+{
+	struct edgeport_port *edge_port;
+
+	edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL);
+	if (!edge_port)
+		return -ENOMEM;
+
+	spin_lock_init(&edge_port->ep_lock);
+	edge_port->port = port;
+
+	usb_set_serial_port_data(port, edge_port);
+
+	return 0;
+}
+
+static int edge_port_remove(struct usb_serial_port *port)
+{
+	struct edgeport_port *edge_port;
+
+	edge_port = usb_get_serial_port_data(port);
+	kfree(edge_port);
+
+	return 0;
+}
+
 module_usb_serial_driver(serial_drivers, id_table_combined);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index 350afddb55ba..1511dd0ad324 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -110,6 +110,8 @@ static struct usb_serial_driver edgeport_2port_device = {
 	.attach			= edge_startup,
 	.disconnect		= edge_disconnect,
 	.release		= edge_release,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
@@ -139,6 +141,8 @@ static struct usb_serial_driver edgeport_4port_device = {
 	.attach			= edge_startup,
 	.disconnect		= edge_disconnect,
 	.release		= edge_release,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
@@ -168,6 +172,8 @@ static struct usb_serial_driver edgeport_8port_device = {
 	.attach			= edge_startup,
 	.disconnect		= edge_disconnect,
 	.release		= edge_release,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
@@ -197,6 +203,8 @@ static struct usb_serial_driver epic_device = {
 	.attach			= edge_startup,
 	.disconnect		= edge_disconnect,
 	.release		= edge_release,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index a2209cd45093..60023c2d2a31 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2532,12 +2532,7 @@ static void edge_break(struct tty_struct *tty, int break_state)
 static int edge_startup(struct usb_serial *serial)
 {
 	struct edgeport_serial *edge_serial;
-	struct edgeport_port *edge_port;
-	struct usb_device *dev;
 	int status;
-	int i;
-
-	dev = serial->dev;
 
 	/* create our private serial structure */
 	edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
@@ -2555,40 +2550,7 @@ static int edge_startup(struct usb_serial *serial)
 		return status;
 	}
 
-	/* set up our port private structures */
-	for (i = 0; i < serial->num_ports; ++i) {
-		edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL);
-		if (edge_port == NULL) {
-			dev_err(&serial->dev->dev, "%s - Out of memory\n",
-								__func__);
-			goto cleanup;
-		}
-		spin_lock_init(&edge_port->ep_lock);
-		if (kfifo_alloc(&edge_port->write_fifo, EDGE_OUT_BUF_SIZE,
-								GFP_KERNEL)) {
-			dev_err(&serial->dev->dev, "%s - Out of memory\n",
-								__func__);
-			kfree(edge_port);
-			goto cleanup;
-		}
-		edge_port->port = serial->port[i];
-		edge_port->edge_serial = edge_serial;
-		usb_set_serial_port_data(serial->port[i], edge_port);
-		edge_port->bUartMode = default_uart_mode;
-	}
-
 	return 0;
-
-cleanup:
-	for (--i; i >= 0; --i) {
-		edge_port = usb_get_serial_port_data(serial->port[i]);
-		kfifo_free(&edge_port->write_fifo);
-		kfree(edge_port);
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
-	kfree(edge_serial);
-	usb_set_serial_data(serial, NULL);
-	return -ENOMEM;
 }
 
 static void edge_disconnect(struct usb_serial *serial)
@@ -2597,17 +2559,54 @@ static void edge_disconnect(struct usb_serial *serial)
 
 static void edge_release(struct usb_serial *serial)
 {
-	int i;
+	kfree(usb_get_serial_data(serial));
+}
+
+static int edge_port_probe(struct usb_serial_port *port)
+{
 	struct edgeport_port *edge_port;
+	int ret;
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		edge_port = usb_get_serial_port_data(serial->port[i]);
+	edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL);
+	if (!edge_port)
+		return -ENOMEM;
+
+	ret = kfifo_alloc(&edge_port->write_fifo, EDGE_OUT_BUF_SIZE,
+								GFP_KERNEL);
+	if (ret) {
+		kfree(edge_port);
+		return -ENOMEM;
+	}
+
+	spin_lock_init(&edge_port->ep_lock);
+	edge_port->port = port;
+	edge_port->edge_serial = usb_get_serial_data(port->serial);
+	edge_port->bUartMode = default_uart_mode;
+
+	usb_set_serial_port_data(port, edge_port);
+
+	ret = edge_create_sysfs_attrs(port);
+	if (ret) {
 		kfifo_free(&edge_port->write_fifo);
 		kfree(edge_port);
+		return ret;
 	}
-	kfree(usb_get_serial_data(serial));
+
+	return 0;
 }
 
+static int edge_port_remove(struct usb_serial_port *port)
+{
+	struct edgeport_port *edge_port;
+
+	edge_port = usb_get_serial_port_data(port);
+
+	edge_remove_sysfs_attrs(port);
+	kfifo_free(&edge_port->write_fifo);
+	kfree(edge_port);
+
+	return 0;
+}
 
 /* Sysfs Attributes */
 
@@ -2667,8 +2666,8 @@ static struct usb_serial_driver edgeport_1port_device = {
 	.attach			= edge_startup,
 	.disconnect		= edge_disconnect,
 	.release		= edge_release,
-	.port_probe		= edge_create_sysfs_attrs,
-	.port_remove		= edge_remove_sysfs_attrs,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
@@ -2698,8 +2697,8 @@ static struct usb_serial_driver edgeport_2port_device = {
 	.attach			= edge_startup,
 	.disconnect		= edge_disconnect,
 	.release		= edge_release,
-	.port_probe		= edge_create_sysfs_attrs,
-	.port_remove		= edge_remove_sysfs_attrs,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 01da3ea36e89..cd5533e81de7 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -53,6 +53,8 @@ static int iuu_cardout;
 static bool xmas;
 static int vcc_default = 5;
 
+static int iuu_create_sysfs_attrs(struct usb_serial_port *port);
+static int iuu_remove_sysfs_attrs(struct usb_serial_port *port);
 static void read_rxcmd_callback(struct urb *urb);
 
 struct iuu_private {
@@ -72,63 +74,55 @@ struct iuu_private {
 	u32 clk;
 };
 
-
-static void iuu_free_buf(struct iuu_private *priv)
-{
-	kfree(priv->buf);
-	kfree(priv->writebuf);
-}
-
-static int iuu_alloc_buf(struct usb_serial *serial, struct iuu_private *priv)
-{
-	priv->buf = kzalloc(256, GFP_KERNEL);
-	priv->writebuf = kzalloc(256, GFP_KERNEL);
-	if (!priv->buf || !priv->writebuf) {
-		iuu_free_buf(priv);
-		dev_dbg(&serial->dev->dev, "%s problem allocation buffer\n", __func__);
-		return -ENOMEM;
-	}
-	dev_dbg(&serial->dev->dev, "%s - Privates buffers allocation success\n", __func__);
-	return 0;
-}
-
-static int iuu_startup(struct usb_serial *serial)
+static int iuu_port_probe(struct usb_serial_port *port)
 {
 	struct iuu_private *priv;
+	int ret;
 
 	priv = kzalloc(sizeof(struct iuu_private), GFP_KERNEL);
-	dev_dbg(&serial->dev->dev, "%s- priv allocation success\n", __func__);
 	if (!priv)
 		return -ENOMEM;
-	if (iuu_alloc_buf(serial, priv)) {
+
+	priv->buf = kzalloc(256, GFP_KERNEL);
+	if (!priv->buf) {
+		kfree(priv);
+		return -ENOMEM;
+	}
+
+	priv->writebuf = kzalloc(256, GFP_KERNEL);
+	if (!priv->writebuf) {
+		kfree(priv->buf);
 		kfree(priv);
 		return -ENOMEM;
 	}
+
 	priv->vcc = vcc_default;
 	spin_lock_init(&priv->lock);
 	init_waitqueue_head(&priv->delta_msr_wait);
-	usb_set_serial_port_data(serial->port[0], priv);
+
+	usb_set_serial_port_data(port, priv);
+
+	ret = iuu_create_sysfs_attrs(port);
+	if (ret) {
+		kfree(priv->writebuf);
+		kfree(priv->buf);
+		kfree(priv);
+		return ret;
+	}
+
 	return 0;
 }
 
-/* Release function */
-static void iuu_release(struct usb_serial *serial)
+static int iuu_port_remove(struct usb_serial_port *port)
 {
-	struct usb_serial_port *port = serial->port[0];
 	struct iuu_private *priv = usb_get_serial_port_data(port);
-	if (!port)
-		return;
 
-	if (priv) {
-		iuu_free_buf(priv);
-		dev_dbg(&port->dev, "%s - I will free all\n", __func__);
-		usb_set_serial_port_data(port, NULL);
-
-		dev_dbg(&port->dev, "%s - priv is not anymore in port structure\n", __func__);
-		kfree(priv);
+	iuu_remove_sysfs_attrs(port);
+	kfree(priv->writebuf);
+	kfree(priv->buf);
+	kfree(priv);
 
-		dev_dbg(&port->dev, "%s priv is now kfree\n", __func__);
-	}
+	return 0;
 }
 
 static int iuu_tiocmset(struct tty_struct *tty,
@@ -1215,8 +1209,6 @@ static struct usb_serial_driver iuu_device = {
 	.num_ports = 1,
 	.bulk_in_size = 512,
 	.bulk_out_size = 512,
-	.port_probe = iuu_create_sysfs_attrs,
-	.port_remove = iuu_remove_sysfs_attrs,
 	.open = iuu_open,
 	.close = iuu_close,
 	.write = iuu_uart_write,
@@ -1225,8 +1217,8 @@ static struct usb_serial_driver iuu_device = {
 	.tiocmset = iuu_tiocmset,
 	.set_termios = iuu_set_termios,
 	.init_termios = iuu_init_termios,
-	.attach = iuu_startup,
-	.release = iuu_release,
+	.port_probe = iuu_port_probe,
+	.port_remove = iuu_port_remove,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index ca43ecb4a2bd..bb87e29c4ac2 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -713,29 +713,33 @@ MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw");
 MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw");
 #endif
 
-static int keyspan_pda_startup(struct usb_serial *serial)
+static int keyspan_pda_port_probe(struct usb_serial_port *port)
 {
 
 	struct keyspan_pda_private *priv;
 
-	/* allocate the private data structures for all ports. Well, for all
-	   one ports. */
-
 	priv = kmalloc(sizeof(struct keyspan_pda_private), GFP_KERNEL);
 	if (!priv)
-		return 1; /* error */
-	usb_set_serial_port_data(serial->port[0], priv);
-	init_waitqueue_head(&serial->port[0]->write_wait);
+		return -ENOMEM;
+
 	INIT_WORK(&priv->wakeup_work, keyspan_pda_wakeup_write);
 	INIT_WORK(&priv->unthrottle_work, keyspan_pda_request_unthrottle);
-	priv->serial = serial;
-	priv->port = serial->port[0];
+	priv->serial = port->serial;
+	priv->port = port;
+
+	usb_set_serial_port_data(port, priv);
+
 	return 0;
 }
 
-static void keyspan_pda_release(struct usb_serial *serial)
+static int keyspan_pda_port_remove(struct usb_serial_port *port)
 {
-	kfree(usb_get_serial_port_data(serial->port[0]));
+	struct keyspan_pda_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
 }
 
 #ifdef KEYSPAN
@@ -786,8 +790,8 @@ static struct usb_serial_driver keyspan_pda_device = {
 	.break_ctl =		keyspan_pda_break_ctl,
 	.tiocmget =		keyspan_pda_tiocmget,
 	.tiocmset =		keyspan_pda_tiocmset,
-	.attach =		keyspan_pda_startup,
-	.release =		keyspan_pda_release,
+	.port_probe =		keyspan_pda_port_probe,
+	.port_remove =		keyspan_pda_port_remove,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 3f6d7376c02d..1f4517864cd2 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -60,8 +60,8 @@
 /*
  * Function prototypes
  */
-static int  klsi_105_startup(struct usb_serial *serial);
-static void klsi_105_release(struct usb_serial *serial);
+static int klsi_105_port_probe(struct usb_serial_port *port);
+static int klsi_105_port_remove(struct usb_serial_port *port);
 static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void klsi_105_close(struct usb_serial_port *port);
 static void klsi_105_set_termios(struct tty_struct *tty,
@@ -99,8 +99,8 @@ static struct usb_serial_driver kl5kusb105d_device = {
 	/*.break_ctl =		klsi_105_break_ctl,*/
 	.tiocmget =		klsi_105_tiocmget,
 	.tiocmset =		klsi_105_tiocmset,
-	.attach =		klsi_105_startup,
-	.release =		klsi_105_release,
+	.port_probe =		klsi_105_port_probe,
+	.port_remove =		klsi_105_port_remove,
 	.throttle =		usb_serial_generic_throttle,
 	.unthrottle =		usb_serial_generic_unthrottle,
 	.process_read_urb =	klsi_105_process_read_urb,
@@ -223,60 +223,40 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
  * Driver's tty interface functions
  */
 
-static int klsi_105_startup(struct usb_serial *serial)
+static int klsi_105_port_probe(struct usb_serial_port *port)
 {
 	struct klsi_105_private *priv;
-	int i;
 
-	/* check if we support the product id (see keyspan.c)
-	 * FIXME
-	 */
+	priv = kmalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
 
-	/* allocate the private data structure */
-	for (i = 0; i < serial->num_ports; i++) {
-		priv = kmalloc(sizeof(struct klsi_105_private),
-						   GFP_KERNEL);
-		if (!priv) {
-			dev_dbg(&serial->interface->dev,
-				"%s - kmalloc for klsi_105_private failed.\n",
-				__func__);
-			i--;
-			goto err_cleanup;
-		}
-		/* set initial values for control structures */
-		priv->cfg.pktlen    = 5;
-		priv->cfg.baudrate  = kl5kusb105a_sio_b9600;
-		priv->cfg.databits  = kl5kusb105a_dtb_8;
-		priv->cfg.unknown1  = 0;
-		priv->cfg.unknown2  = 1;
+	/* set initial values for control structures */
+	priv->cfg.pktlen    = 5;
+	priv->cfg.baudrate  = kl5kusb105a_sio_b9600;
+	priv->cfg.databits  = kl5kusb105a_dtb_8;
+	priv->cfg.unknown1  = 0;
+	priv->cfg.unknown2  = 1;
 
-		priv->line_state    = 0;
+	priv->line_state    = 0;
 
-		usb_set_serial_port_data(serial->port[i], priv);
+	spin_lock_init(&priv->lock);
 
-		spin_lock_init(&priv->lock);
+	/* priv->termios is left uninitialized until port opening */
 
-		/* priv->termios is left uninitialized until port opening */
-		init_waitqueue_head(&serial->port[i]->write_wait);
-	}
+	usb_set_serial_port_data(port, priv);
 
 	return 0;
-
-err_cleanup:
-	for (; i >= 0; i--) {
-		priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(priv);
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
-	return -ENOMEM;
 }
 
-static void klsi_105_release(struct usb_serial *serial)
+static int klsi_105_port_remove(struct usb_serial_port *port)
 {
-	int i;
+	struct klsi_105_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
 
-	for (i = 0; i < serial->num_ports; ++i)
-		kfree(usb_get_serial_port_data(serial->port[i]));
+	return 0;
 }
 
 static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 5c4d2fbd4e11..c9ca7a5b12e0 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -54,8 +54,8 @@
 
 
 /* Function prototypes */
-static int  kobil_startup(struct usb_serial *serial);
-static void kobil_release(struct usb_serial *serial);
+static int kobil_port_probe(struct usb_serial_port *probe);
+static int kobil_port_remove(struct usb_serial_port *probe);
 static int  kobil_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void kobil_close(struct usb_serial_port *port);
 static int  kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -89,8 +89,8 @@ static struct usb_serial_driver kobil_device = {
 	.description =		"KOBIL USB smart card terminal",
 	.id_table =		id_table,
 	.num_ports =		1,
-	.attach =		kobil_startup,
-	.release =		kobil_release,
+	.port_probe =		kobil_port_probe,
+	.port_remove =		kobil_port_remove,
 	.ioctl =		kobil_ioctl,
 	.set_termios =		kobil_set_termios,
 	.init_termios =		kobil_init_termios,
@@ -117,9 +117,10 @@ struct kobil_private {
 };
 
 
-static int kobil_startup(struct usb_serial *serial)
+static int kobil_port_probe(struct usb_serial_port *port)
 {
 	int i;
+	struct usb_serial *serial = port->serial;
 	struct kobil_private *priv;
 	struct usb_device *pdev;
 	struct usb_host_config *actconfig;
@@ -149,7 +150,7 @@ static int kobil_startup(struct usb_serial *serial)
 		dev_dbg(&serial->dev->dev, "KOBIL KAAN SIM detected\n");
 		break;
 	}
-	usb_set_serial_port_data(serial->port[0], priv);
+	usb_set_serial_port_data(port, priv);
 
 	/* search for the necessary endpoints */
 	pdev = serial->dev;
@@ -179,12 +180,14 @@ static int kobil_startup(struct usb_serial *serial)
 }
 
 
-static void kobil_release(struct usb_serial *serial)
+static int kobil_port_remove(struct usb_serial_port *port)
 {
-	int i;
+	struct kobil_private *priv;
 
-	for (i = 0; i < serial->num_ports; ++i)
-		kfree(usb_get_serial_port_data(serial->port[i]));
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
 }
 
 static void kobil_init_termios(struct tty_struct *tty)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 30cff03e9f01..54d4148d01d1 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -503,11 +503,19 @@ static const struct option_blacklist_info net_intf5_blacklist = {
 	.reserved = BIT(5),
 };
 
+static const struct option_blacklist_info net_intf6_blacklist = {
+	.reserved = BIT(6),
+};
+
 static const struct option_blacklist_info zte_mf626_blacklist = {
 	.sendsetup = BIT(0) | BIT(1),
 	.reserved = BIT(4),
 };
 
+static const struct option_blacklist_info zte_1255_blacklist = {
+	.reserved = BIT(3) | BIT(4),
+};
+
 static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -853,13 +861,19 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0113, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0117, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0118, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0121, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0118, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0121, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0122, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0123, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0124, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0125, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0123, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0124, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0125, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0128, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0142, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) },
@@ -872,7 +886,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
@@ -880,13 +895,22 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0199, 0xff, 0xff, 0xff), /* ZTE MF820S */
+	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */
+	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1021, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) },
@@ -1002,18 +1026,24 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1169, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1170, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1244, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1245, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1245, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1246, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1247, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1247, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1248, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1249, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1250, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1251, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1252, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1252, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1253, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1254, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1255, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1256, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1254, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1255, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&zte_1255_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1256, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1257, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1258, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1259, 0xff, 0xff, 0xff) },
@@ -1058,8 +1088,16 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1424, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1425, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff),  /* ZTE MF91 */
+		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
 	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
@@ -1071,15 +1109,21 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 933241f03fd8..cee9a52ca891 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -137,8 +137,8 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty);
 static int oti6858_tiocmget(struct tty_struct *tty);
 static int oti6858_tiocmset(struct tty_struct *tty,
 				unsigned int set, unsigned int clear);
-static int oti6858_startup(struct usb_serial *serial);
-static void oti6858_release(struct usb_serial *serial);
+static int oti6858_port_probe(struct usb_serial_port *port);
+static int oti6858_port_remove(struct usb_serial_port *port);
 
 /* device info */
 static struct usb_serial_driver oti6858_device = {
@@ -161,8 +161,8 @@ static struct usb_serial_driver oti6858_device = {
 	.write_bulk_callback =	oti6858_write_bulk_callback,
 	.write_room =		oti6858_write_room,
 	.chars_in_buffer =	oti6858_chars_in_buffer,
-	.attach =		oti6858_startup,
-	.release =		oti6858_release,
+	.port_probe =		oti6858_port_probe,
+	.port_remove =		oti6858_port_remove,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
@@ -331,36 +331,33 @@ static void send_data(struct work_struct *work)
 	usb_serial_port_softint(port);
 }
 
-static int oti6858_startup(struct usb_serial *serial)
+static int oti6858_port_probe(struct usb_serial_port *port)
 {
-	struct usb_serial_port *port = serial->port[0];
 	struct oti6858_private *priv;
-	int i;
-
-	for (i = 0; i < serial->num_ports; ++i) {
-		priv = kzalloc(sizeof(struct oti6858_private), GFP_KERNEL);
-		if (!priv)
-			break;
-
-		spin_lock_init(&priv->lock);
-		init_waitqueue_head(&priv->intr_wait);
-/*		INIT_WORK(&priv->setup_work, setup_line, serial->port[i]); */
-/*		INIT_WORK(&priv->write_work, send_data, serial->port[i]); */
-		priv->port = port;
-		INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line);
-		INIT_DELAYED_WORK(&priv->delayed_write_work, send_data);
-
-		usb_set_serial_port_data(serial->port[i], priv);
-	}
-	if (i == serial->num_ports)
-		return 0;
 
-	for (--i; i >= 0; --i) {
-		priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(priv);
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
-	return -ENOMEM;
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->lock);
+	init_waitqueue_head(&priv->intr_wait);
+	priv->port = port;
+	INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line);
+	INIT_DELAYED_WORK(&priv->delayed_write_work, send_data);
+
+	usb_set_serial_port_data(port, priv);
+
+	return 0;
+}
+
+static int oti6858_port_remove(struct usb_serial_port *port)
+{
+	struct oti6858_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
 }
 
 static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -709,15 +706,6 @@ static int oti6858_ioctl(struct tty_struct *tty,
 	return -ENOIOCTLCMD;
 }
 
-
-static void oti6858_release(struct usb_serial *serial)
-{
-	int i;
-
-	for (i = 0; i < serial->num_ports; ++i)
-		kfree(usb_get_serial_port_data(serial->port[i]));
-}
-
 static void oti6858_read_int_callback(struct urb *urb)
 {
 	struct usb_serial_port *port =  urb->context;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 892ebdc7a364..600241901361 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -133,12 +133,15 @@ enum pl2303_type {
 	HX,		/* HX version of the pl2303 chip */
 };
 
+struct pl2303_serial_private {
+	enum pl2303_type type;
+};
+
 struct pl2303_private {
 	spinlock_t lock;
 	wait_queue_head_t delta_msr_wait;
 	u8 line_control;
 	u8 line_status;
-	enum pl2303_type type;
 };
 
 static int pl2303_vendor_read(__u16 value, __u16 index,
@@ -167,14 +170,19 @@ static int pl2303_vendor_write(__u16 value, __u16 index,
 
 static int pl2303_startup(struct usb_serial *serial)
 {
-	struct pl2303_private *priv;
+	struct pl2303_serial_private *spriv;
 	enum pl2303_type type = type_0;
 	unsigned char *buf;
-	int i;
+
+	spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
+	if (!spriv)
+		return -ENOMEM;
 
 	buf = kmalloc(10, GFP_KERNEL);
-	if (buf == NULL)
+	if (!buf) {
+		kfree(spriv);
 		return -ENOMEM;
+	}
 
 	if (serial->dev->descriptor.bDeviceClass == 0x02)
 		type = type_0;
@@ -186,15 +194,8 @@ static int pl2303_startup(struct usb_serial *serial)
 		type = type_1;
 	dev_dbg(&serial->interface->dev, "device type: %d\n", type);
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		priv = kzalloc(sizeof(struct pl2303_private), GFP_KERNEL);
-		if (!priv)
-			goto cleanup;
-		spin_lock_init(&priv->lock);
-		init_waitqueue_head(&priv->delta_msr_wait);
-		priv->type = type;
-		usb_set_serial_port_data(serial->port[i], priv);
-	}
+	spriv->type = type;
+	usb_set_serial_data(serial, spriv);
 
 	pl2303_vendor_read(0x8484, 0, serial, buf);
 	pl2303_vendor_write(0x0404, 0, serial);
@@ -213,15 +214,40 @@ static int pl2303_startup(struct usb_serial *serial)
 
 	kfree(buf);
 	return 0;
+}
 
-cleanup:
-	kfree(buf);
-	for (--i; i >= 0; --i) {
-		priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(priv);
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
-	return -ENOMEM;
+static void pl2303_release(struct usb_serial *serial)
+{
+	struct pl2303_serial_private *spriv;
+
+	spriv = usb_get_serial_data(serial);
+	kfree(spriv);
+}
+
+static int pl2303_port_probe(struct usb_serial_port *port)
+{
+	struct pl2303_private *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->lock);
+	init_waitqueue_head(&priv->delta_msr_wait);
+
+	usb_set_serial_port_data(port, priv);
+
+	return 0;
+}
+
+static int pl2303_port_remove(struct usb_serial_port *port)
+{
+	struct pl2303_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
 }
 
 static int set_control_lines(struct usb_device *dev, u8 value)
@@ -240,6 +266,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
+	struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned int cflag;
@@ -323,7 +350,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 		}
 		if (baud > 1228800) {
 			/* type_0, type_1 only support up to 1228800 baud */
-			if (priv->type != HX)
+			if (spriv->type != HX)
 				baud = 1228800;
 			else if (baud > 6000000)
 				baud = 6000000;
@@ -426,7 +453,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	     buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
 
 	if (cflag & CRTSCTS) {
-		if (priv->type == HX)
+		if (spriv->type == HX)
 			pl2303_vendor_write(0x0, 0x61, serial);
 		else
 			pl2303_vendor_write(0x0, 0x41, serial);
@@ -468,10 +495,10 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
 	int result;
 
-	if (priv->type != HX) {
+	if (spriv->type != HX) {
 		usb_clear_halt(serial->dev, port->write_urb->pipe);
 		usb_clear_halt(serial->dev, port->read_urb->pipe);
 	} else {
@@ -655,17 +682,6 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
 		dev_err(&port->dev, "error sending break = %d\n", result);
 }
 
-static void pl2303_release(struct usb_serial *serial)
-{
-	int i;
-	struct pl2303_private *priv;
-
-	for (i = 0; i < serial->num_ports; ++i) {
-		priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(priv);
-	}
-}
-
 static void pl2303_update_line_status(struct usb_serial_port *port,
 				      unsigned char *data,
 				      unsigned int actual_length)
@@ -827,6 +843,8 @@ static struct usb_serial_driver pl2303_device = {
 	.read_int_callback =	pl2303_read_int_callback,
 	.attach =		pl2303_startup,
 	.release =		pl2303_release,
+	.port_probe =		pl2303_port_probe,
+	.port_remove =		pl2303_port_remove,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 9716efe92955..769c137f8975 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -157,13 +157,10 @@ struct spcp8x5_private {
 	u8 			line_status;
 };
 
-/* desc : when device plug in,this function would be called.
- * thanks to usb_serial subsystem,then do almost every things for us. And what
- * we should do just alloc the buffer */
-static int spcp8x5_startup(struct usb_serial *serial)
+static int spcp8x5_port_probe(struct usb_serial_port *port)
 {
+	struct usb_serial *serial = port->serial;
 	struct spcp8x5_private *priv;
-	int i;
 	enum spcp8x5_type type = SPCP825_007_TYPE;
 	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
 
@@ -180,34 +177,27 @@ static int spcp8x5_startup(struct usb_serial *serial)
 		type = SPCP825_PHILIP_TYPE;
 	dev_dbg(&serial->dev->dev, "device type = %d\n", (int)type);
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		priv = kzalloc(sizeof(struct spcp8x5_private), GFP_KERNEL);
-		if (!priv)
-			goto cleanup;
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
 
-		spin_lock_init(&priv->lock);
-		init_waitqueue_head(&priv->delta_msr_wait);
-		priv->type = type;
-		usb_set_serial_port_data(serial->port[i] , priv);
-	}
+	spin_lock_init(&priv->lock);
+	init_waitqueue_head(&priv->delta_msr_wait);
+	priv->type = type;
+
+	usb_set_serial_port_data(port , priv);
 
 	return 0;
-cleanup:
-	for (--i; i >= 0; --i) {
-		priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(priv);
-		usb_set_serial_port_data(serial->port[i] , NULL);
-	}
-	return -ENOMEM;
 }
 
-/* call when the device plug out. free all the memory alloced by probe */
-static void spcp8x5_release(struct usb_serial *serial)
+static int spcp8x5_port_remove(struct usb_serial_port *port)
 {
-	int i;
+	struct spcp8x5_private *priv;
 
-	for (i = 0; i < serial->num_ports; i++)
-		kfree(usb_get_serial_port_data(serial->port[i]));
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
 }
 
 /* set the modem control line of the device.
@@ -649,8 +639,8 @@ static struct usb_serial_driver spcp8x5_device = {
 	.ioctl 			= spcp8x5_ioctl,
 	.tiocmget 		= spcp8x5_tiocmget,
 	.tiocmset 		= spcp8x5_tiocmset,
-	.attach 		= spcp8x5_startup,
-	.release 		= spcp8x5_release,
+	.port_probe		= spcp8x5_port_probe,
+	.port_remove		= spcp8x5_port_remove,
 	.process_read_urb	= spcp8x5_process_read_urb,
 };
 
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 015810b3785b..868d1e6852e2 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -67,13 +67,6 @@ struct ssu100_port_private {
 	struct async_icount icount;
 };
 
-static void ssu100_release(struct usb_serial *serial)
-{
-	struct ssu100_port_private *priv = usb_get_serial_port_data(*serial->port);
-
-	kfree(priv);
-}
-
 static inline int ssu100_control_msg(struct usb_device *dev,
 				     u8 request, u16 data, u16 index)
 {
@@ -442,21 +435,33 @@ static int ssu100_ioctl(struct tty_struct *tty,
 
 static int ssu100_attach(struct usb_serial *serial)
 {
+	return ssu100_initdevice(serial->dev);
+}
+
+static int ssu100_port_probe(struct usb_serial_port *port)
+{
 	struct ssu100_port_private *priv;
-	struct usb_serial_port *port = *serial->port;
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-	if (!priv) {
-		dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
-			sizeof(*priv));
+	if (!priv)
 		return -ENOMEM;
-	}
 
 	spin_lock_init(&priv->status_lock);
 	init_waitqueue_head(&priv->delta_msr_wait);
+
 	usb_set_serial_port_data(port, priv);
 
-	return ssu100_initdevice(serial->dev);
+	return 0;
+}
+
+static int ssu100_port_remove(struct usb_serial_port *port)
+{
+	struct ssu100_port_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
 }
 
 static int ssu100_tiocmget(struct tty_struct *tty)
@@ -647,7 +652,8 @@ static struct usb_serial_driver ssu100_device = {
 	.open		     = ssu100_open,
 	.close		     = ssu100_close,
 	.attach              = ssu100_attach,
-	.release             = ssu100_release,
+	.port_probe          = ssu100_port_probe,
+	.port_remove         = ssu100_port_remove,
 	.dtr_rts             = ssu100_dtr_rts,
 	.process_read_urb    = ssu100_process_read_urb,
 	.tiocmget            = ssu100_tiocmget,
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 6f49392cda5b..f2530d2ef3c4 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -97,6 +97,8 @@ struct ti_device {
 
 static int ti_startup(struct usb_serial *serial);
 static void ti_release(struct usb_serial *serial);
+static int ti_port_probe(struct usb_serial_port *port);
+static int ti_port_remove(struct usb_serial_port *port);
 static int ti_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void ti_close(struct usb_serial_port *port);
 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -221,6 +223,8 @@ static struct usb_serial_driver ti_1port_device = {
 	.num_ports		= 1,
 	.attach			= ti_startup,
 	.release		= ti_release,
+	.port_probe		= ti_port_probe,
+	.port_remove		= ti_port_remove,
 	.open			= ti_open,
 	.close			= ti_close,
 	.write			= ti_write,
@@ -249,6 +253,8 @@ static struct usb_serial_driver ti_2port_device = {
 	.num_ports		= 2,
 	.attach			= ti_startup,
 	.release		= ti_release,
+	.port_probe		= ti_port_probe,
+	.port_remove		= ti_port_remove,
 	.open			= ti_open,
 	.close			= ti_close,
 	.write			= ti_write,
@@ -347,11 +353,8 @@ module_exit(ti_exit);
 static int ti_startup(struct usb_serial *serial)
 {
 	struct ti_device *tdev;
-	struct ti_port *tport;
 	struct usb_device *dev = serial->dev;
 	int status;
-	int i;
-
 
 	dev_dbg(&dev->dev,
 		"%s - product 0x%4X, num configurations %d, configuration value %d",
@@ -399,42 +402,8 @@ static int ti_startup(struct usb_serial *serial)
 		goto free_tdev;
 	}
 
-	/* set up port structures */
-	for (i = 0; i < serial->num_ports; ++i) {
-		tport = kzalloc(sizeof(struct ti_port), GFP_KERNEL);
-		if (tport == NULL) {
-			dev_err(&dev->dev, "%s - out of memory\n", __func__);
-			status = -ENOMEM;
-			goto free_tports;
-		}
-		spin_lock_init(&tport->tp_lock);
-		tport->tp_uart_base_addr = (i == 0 ?
-				TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
-		tport->tp_closing_wait = closing_wait;
-		init_waitqueue_head(&tport->tp_msr_wait);
-		init_waitqueue_head(&tport->tp_write_wait);
-		if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE,
-								GFP_KERNEL)) {
-			dev_err(&dev->dev, "%s - out of memory\n", __func__);
-			kfree(tport);
-			status = -ENOMEM;
-			goto free_tports;
-		}
-		tport->tp_port = serial->port[i];
-		tport->tp_tdev = tdev;
-		usb_set_serial_port_data(serial->port[i], tport);
-		tport->tp_uart_mode = 0;	/* default is RS232 */
-	}
-
 	return 0;
 
-free_tports:
-	for (--i; i >= 0; --i) {
-		tport = usb_get_serial_port_data(serial->port[i]);
-		kfifo_free(&tport->write_fifo);
-		kfree(tport);
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
 free_tdev:
 	kfree(tdev);
 	usb_set_serial_data(serial, NULL);
@@ -444,21 +413,50 @@ free_tdev:
 
 static void ti_release(struct usb_serial *serial)
 {
-	int i;
 	struct ti_device *tdev = usb_get_serial_data(serial);
+
+	kfree(tdev);
+}
+
+static int ti_port_probe(struct usb_serial_port *port)
+{
 	struct ti_port *tport;
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		tport = usb_get_serial_port_data(serial->port[i]);
-		if (tport) {
-			kfifo_free(&tport->write_fifo);
-			kfree(tport);
-		}
+	tport = kzalloc(sizeof(*tport), GFP_KERNEL);
+	if (!tport)
+		return -ENOMEM;
+
+	spin_lock_init(&tport->tp_lock);
+	if (port == port->serial->port[0])
+		tport->tp_uart_base_addr = TI_UART1_BASE_ADDR;
+	else
+		tport->tp_uart_base_addr = TI_UART2_BASE_ADDR;
+	tport->tp_closing_wait = closing_wait;
+	init_waitqueue_head(&tport->tp_msr_wait);
+	init_waitqueue_head(&tport->tp_write_wait);
+	if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE, GFP_KERNEL)) {
+		kfree(tport);
+		return -ENOMEM;
 	}
+	tport->tp_port = port;
+	tport->tp_tdev = usb_get_serial_data(port->serial);
+	tport->tp_uart_mode = 0;	/* default is RS232 */
 
-	kfree(tdev);
+	usb_set_serial_port_data(port, tport);
+
+	return 0;
 }
 
+static int ti_port_remove(struct usb_serial_port *port)
+{
+	struct ti_port *tport;
+
+	tport = usb_get_serial_port_data(port);
+	kfifo_free(&tport->write_fifo);
+	kfree(tport);
+
+	return 0;
+}
 
 static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
 {