arm: omap: usb: create common enums and structures for ehci and ohci

Create the ehci and ohci specific platform data structures.
The port enum values are made common for both ehci and ohci.

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

2 files changed, 32 insertions, 32 deletions

diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 15277213f928..18df6c6a5803 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -155,9 +155,9 @@
 #define is_omap_ehci_rev1(x)	(x->omap_ehci_rev == OMAP_EHCI_REV1)
 #define is_omap_ehci_rev2(x)	(x->omap_ehci_rev == OMAP_EHCI_REV2)
 
-#define is_ehci_phy_mode(x)	(x == EHCI_HCD_OMAP_MODE_PHY)
-#define is_ehci_tll_mode(x)	(x == EHCI_HCD_OMAP_MODE_TLL)
-#define is_ehci_hsic_mode(x)	(x == EHCI_HCD_OMAP_MODE_HSIC)
+#define is_ehci_phy_mode(x)	(x == OMAP_EHCI_PORT_MODE_PHY)
+#define is_ehci_tll_mode(x)	(x == OMAP_EHCI_PORT_MODE_TLL)
+#define is_ehci_hsic_mode(x)	(x == OMAP_EHCI_PORT_MODE_HSIC)
 
 /*-------------------------------------------------------------------------*/
 
@@ -220,7 +220,7 @@ struct ehci_hcd_omap {
 	u32			omap_ehci_rev;
 
 	/* desired phy_mode: TLL, PHY */
-	enum ehci_hcd_omap_mode	port_mode[OMAP3_HS_USB_PORTS];
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
 
 	void __iomem		*uhh_base;
 	void __iomem		*tll_base;
@@ -389,7 +389,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	 */
 	if (is_omap_ehci_rev2(omap)) {
 		switch (omap->port_mode[0]) {
-		case EHCI_HCD_OMAP_MODE_PHY:
+		case OMAP_EHCI_PORT_MODE_PHY:
 			omap->xclk60mhsp1_ck = clk_get(omap->dev,
 							"xclk60mhsp1_ck");
 			if (IS_ERR(omap->xclk60mhsp1_ck)) {
@@ -413,7 +413,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 					"Unable to set P1 f-clock\n");
 			}
 			break;
-		case EHCI_HCD_OMAP_MODE_TLL:
+		case OMAP_EHCI_PORT_MODE_TLL:
 			omap->xclk60mhsp1_ck = clk_get(omap->dev,
 							"init_60m_fclk");
 			if (IS_ERR(omap->xclk60mhsp1_ck)) {
@@ -463,7 +463,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 			break;
 		}
 		switch (omap->port_mode[1]) {
-		case EHCI_HCD_OMAP_MODE_PHY:
+		case OMAP_EHCI_PORT_MODE_PHY:
 			omap->xclk60mhsp2_ck = clk_get(omap->dev,
 							"xclk60mhsp2_ck");
 			if (IS_ERR(omap->xclk60mhsp2_ck)) {
@@ -487,7 +487,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 					"Unable to set P2 f-clock\n");
 			}
 			break;
-		case EHCI_HCD_OMAP_MODE_TLL:
+		case OMAP_EHCI_PORT_MODE_TLL:
 			omap->xclk60mhsp2_ck = clk_get(omap->dev,
 							"init_60m_fclk");
 			if (IS_ERR(omap->xclk60mhsp2_ck)) {
@@ -591,11 +591,11 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
 
 	if (is_omap_ehci_rev1(omap)) {
-		if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+		if (omap->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED)
 			reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
-		if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+		if (omap->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED)
 			reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
-		if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+		if (omap->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED)
 			reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
 
 		/* Bypass the TLL module for PHY mode operation */
@@ -656,15 +656,15 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	ehci_omap_writel(omap->ehci_base, EHCI_INSNREG04,
 				EHCI_INSNREG04_DISABLE_UNSUSPEND);
 
-	if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) ||
-		(omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) ||
-			(omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)) {
+	if ((omap->port_mode[0] == OMAP_EHCI_PORT_MODE_TLL) ||
+		(omap->port_mode[1] == OMAP_EHCI_PORT_MODE_TLL) ||
+			(omap->port_mode[2] == OMAP_EHCI_PORT_MODE_TLL)) {
 
-		if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL)
+		if (omap->port_mode[0] == OMAP_EHCI_PORT_MODE_TLL)
 			tll_ch_mask |= OMAP_TLL_CHANNEL_1_EN_MASK;
-		if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL)
+		if (omap->port_mode[1] == OMAP_EHCI_PORT_MODE_TLL)
 			tll_ch_mask |= OMAP_TLL_CHANNEL_2_EN_MASK;
-		if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)
+		if (omap->port_mode[2] == OMAP_EHCI_PORT_MODE_TLL)
 			tll_ch_mask |= OMAP_TLL_CHANNEL_3_EN_MASK;
 
 		/* Enable UTMI mode for required TLL channels */
@@ -686,9 +686,9 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	}
 
 	/* Soft reset the PHY using PHY reset command over ULPI */
-	if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY)
+	if (omap->port_mode[0] == OMAP_EHCI_PORT_MODE_PHY)
 		omap_ehci_soft_phy_reset(omap, 0);
-	if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY)
+	if (omap->port_mode[1] == OMAP_EHCI_PORT_MODE_PHY)
 		omap_ehci_soft_phy_reset(omap, 1);
 
 	return 0;
@@ -903,7 +903,7 @@ static const struct hc_driver ehci_omap_hc_driver;
  */
 static int ehci_hcd_omap_probe(struct platform_device *pdev)
 {
-	struct ehci_hcd_omap_platform_data *pdata = pdev->dev.platform_data;
+	struct usbhs_omap_board_data *pdata = pdev->dev.platform_data;
 	struct ehci_hcd_omap *omap;
 	struct resource *res;
 	struct usb_hcd *hcd;
@@ -981,7 +981,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 
 	/* get ehci regulator and enable */
 	for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
-		if (omap->port_mode[i] != EHCI_HCD_OMAP_MODE_PHY) {
+		if (omap->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) {
 			omap->regulator[i] = NULL;
 			continue;
 		}
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 32f56bbec214..3f9db87fe525 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -141,7 +141,7 @@ struct ohci_hcd_omap3 {
 	struct clk		*usbtll_ick;
 
 	/* port_mode: TLL/PHY, 2/3/4/6-PIN, DP-DM/DAT-SE0 */
-	enum ohci_omap3_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
 	void __iomem		*uhh_base;
 	void __iomem		*tll_base;
 	void __iomem		*ohci_base;
@@ -206,10 +206,10 @@ static int ohci_omap3_start(struct usb_hcd *hcd)
  * convert the port-mode enum to a value we can use in the FSLSMODE
  * field of USBTLL_CHANNEL_CONF
  */
-static unsigned ohci_omap3_fslsmode(enum ohci_omap3_port_mode mode)
+static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
 {
 	switch (mode) {
-	case OMAP_OHCI_PORT_MODE_UNUSED:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 		return 0x0;
 
@@ -266,7 +266,7 @@ static void ohci_omap3_tll_config(struct ohci_hcd_omap3 *omap)
 	for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
 
 		/* Enable only those channels that are actually used */
-		if (omap->port_mode[i] == OMAP_OHCI_PORT_MODE_UNUSED)
+		if (omap->port_mode[i] == OMAP_USBHS_PORT_MODE_UNUSED)
 			continue;
 
 		reg = ohci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
@@ -382,11 +382,11 @@ static int omap3_start_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd)
 	 *
 	 * For now, turn off all the Pi_CONNECT_STATUS bits
 	 *
-	if (omap->port_mode[0] == OMAP_OHCI_PORT_MODE_UNUSED)
+	if (omap->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED)
 		reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
-	if (omap->port_mode[1] == OMAP_OHCI_PORT_MODE_UNUSED)
+	if (omap->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED)
 		reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
-	if (omap->port_mode[2] == OMAP_OHCI_PORT_MODE_UNUSED)
+	if (omap->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED)
 		reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
 	 */
 	reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
@@ -403,17 +403,17 @@ static int omap3_start_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd)
 		reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
 	} else {
 		dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n");
-		if (omap->port_mode[0] == OMAP_OHCI_PORT_MODE_UNUSED)
+		if (omap->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED)
 			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
 		else
 			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
 
-		if (omap->port_mode[1] == OMAP_OHCI_PORT_MODE_UNUSED)
+		if (omap->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED)
 			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
 		else
 			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
 
-		if (omap->port_mode[2] == OMAP_OHCI_PORT_MODE_UNUSED)
+		if (omap->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED)
 			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
 		else
 			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
@@ -580,7 +580,7 @@ static const struct hc_driver ohci_omap3_hc_driver = {
  */
 static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
 {
-	struct ohci_hcd_omap_platform_data *pdata = pdev->dev.platform_data;
+	struct usbhs_omap_board_data *pdata = pdev->dev.platform_data;
 	struct ohci_hcd_omap3 *omap;
 	struct resource *res;
 	struct usb_hcd *hcd;