wusb: add the Wireless USB core

Add support for Ceritified Wireless USB 1.0 to the USB stack.

This has been split into several patches for easier review.

core (this patch):
  - host controller infrastructure
  - cluster reservation
  - UWB PAL registration
  - fake root hub

protocol:
  - MMC management (start/stop, managing IEs)
  - device connection

security:
  - device authentication and authorization

build-system:
  - Kconfig and Kbuild files

Signed-off-by: David Vrabel <david.vrabel@csr.com>

1 files changed, 477 insertions, 0 deletions

diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c
new file mode 100644
index 000000000000..267a64325106
--- /dev/null
+++ b/drivers/usb/wusbcore/rh.c
@@ -0,0 +1,477 @@
+/*
+ * Wireless USB Host Controller
+ * Root Hub operations
+ *
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * We fake a root hub that has fake ports (as many as simultaneous
+ * devices the Wireless USB Host Controller can deal with). For each
+ * port we keep an state in @wusbhc->port[index] identical to the one
+ * specified in the USB2.0[ch11] spec and some extra device
+ * information that complements the one in 'struct usb_device' (as
+ * this lacs a hcpriv pointer).
+ *
+ * Note this is common to WHCI and HWA host controllers.
+ *
+ * Through here we enable most of the state changes that the USB stack
+ * will use to connect or disconnect devices. We need to do some
+ * forced adaptation of Wireless USB device states vs. wired:
+ *
+ *        USB:                 WUSB:
+ *
+ * Port   Powered-off          port slot n/a
+ *        Powered-on           port slot available
+ *        Disconnected         port slot available
+ *        Connected            port slot assigned device
+ *        		       device sent DN_Connect
+ *                             device was authenticated
+ *        Enabled              device is authenticated, transitioned
+ *                             from unauth -> auth -> default address
+ *                             -> enabled
+ *        Reset                disconnect
+ *        Disable              disconnect
+ *
+ * This maps the standard USB port states with the WUSB device states
+ * so we can fake ports without having to modify the USB stack.
+ *
+ * FIXME: this process will change in the future
+ *
+ *
+ * ENTRY POINTS
+ *
+ * Our entry points into here are, as in hcd.c, the USB stack root hub
+ * ops defined in the usb_hcd struct:
+ *
+ * wusbhc_rh_status_data()	Provide hub and port status data bitmap
+ *
+ * wusbhc_rh_control()          Execution of all the major requests
+ *                              you can do to a hub (Set|Clear
+ *                              features, get descriptors, status, etc).
+ *
+ * wusbhc_rh_[suspend|resume]() That
+ *
+ * wusbhc_rh_start_port_reset() ??? unimplemented
+ */
+#include "wusbhc.h"
+
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+/*
+ * Reset a fake port
+ *
+ * This can be called to reset a port from any other state or to reset
+ * it when connecting. In Wireless USB they are different; when doing
+ * a new connect that involves going over the authentication. When
+ * just reseting, its a different story.
+ *
+ * The Linux USB stack resets a port twice before it considers it
+ * enabled, so we have to detect and ignore that.
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ *
+ * Supposedly we are the only thread accesing @wusbhc->port; in any
+ * case, maybe we should move the mutex locking from
+ * wusbhc_devconnect_auth() to here.
+ *
+ * @port_idx refers to the wusbhc's port index, not the USB port number
+ */
+static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx)
+{
+	int result = 0;
+	struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx);
+
+	d_fnstart(3, wusbhc->dev, "(wusbhc %p port_idx %u)\n",
+		  wusbhc, port_idx);
+	if (port->reset_count == 0) {
+		wusbhc_devconnect_auth(wusbhc, port_idx);
+		port->reset_count++;
+	} else if (port->reset_count == 1)
+		/* see header */
+		d_printf(2, wusbhc->dev, "Ignoring second reset on port_idx "
+			"%u\n", port_idx);
+	else
+		result = wusbhc_dev_reset(wusbhc, port_idx);
+	d_fnend(3, wusbhc->dev, "(wusbhc %p port_idx %u) = %d\n",
+		wusbhc, port_idx, result);
+	return result;
+}
+
+/*
+ * Return the hub change status bitmap
+ *
+ * The bits in the change status bitmap are cleared when a
+ * ClearPortFeature request is issued (USB2.0[11.12.3,11.12.4].
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ *
+ * WARNING!! This gets called from atomic context; we cannot get the
+ *           mutex--the only race condition we can find is some bit
+ *           changing just after we copy it, which shouldn't be too
+ *           big of a problem [and we can't make it an spinlock
+ *           because other parts need to take it and sleep] .
+ *
+ *           @usb_hcd is refcounted, so it won't dissapear under us
+ *           and before killing a host, the polling of the root hub
+ *           would be stopped anyway.
+ */
+int wusbhc_rh_status_data(struct usb_hcd *usb_hcd, char *_buf)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	size_t cnt, size;
+	unsigned long *buf = (unsigned long *) _buf;
+
+	d_fnstart(1, wusbhc->dev, "(wusbhc %p)\n", wusbhc);
+	/* WE DON'T LOCK, see comment */
+	size = wusbhc->ports_max + 1 /* hub bit */;
+	size = (size + 8 - 1) / 8;	/* round to bytes */
+	for (cnt = 0; cnt < wusbhc->ports_max; cnt++)
+		if (wusb_port_by_idx(wusbhc, cnt)->change)
+			set_bit(cnt + 1, buf);
+		else
+			clear_bit(cnt + 1, buf);
+	d_fnend(1, wusbhc->dev, "(wusbhc %p) %u, buffer:\n", wusbhc, (int)size);
+	d_dump(1, wusbhc->dev, _buf, size);
+	return size;
+}
+EXPORT_SYMBOL_GPL(wusbhc_rh_status_data);
+
+/*
+ * Return the hub's desciptor
+ *
+ * NOTE: almost cut and paste from ehci-hub.c
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked
+ */
+static int wusbhc_rh_get_hub_descr(struct wusbhc *wusbhc, u16 wValue,
+				   u16 wIndex,
+				   struct usb_hub_descriptor *descr,
+				   u16 wLength)
+{
+	u16 temp = 1 + (wusbhc->ports_max / 8);
+	u8 length = 7 + 2 * temp;
+
+	if (wLength < length)
+		return -ENOSPC;
+	descr->bDescLength = 7 + 2 * temp;
+	descr->bDescriptorType = 0x29;	/* HUB type */
+	descr->bNbrPorts = wusbhc->ports_max;
+	descr->wHubCharacteristics = cpu_to_le16(
+		0x00			/* All ports power at once */
+		| 0x00			/* not part of compound device */
+		| 0x10			/* No overcurrent protection */
+		| 0x00			/* 8 FS think time FIXME ?? */
+		| 0x00);		/* No port indicators */
+	descr->bPwrOn2PwrGood = 0;
+	descr->bHubContrCurrent = 0;
+	/* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+	memset(&descr->bitmap[0], 0, temp);
+	memset(&descr->bitmap[temp], 0xff, temp);
+	return 0;
+}
+
+/*
+ * Clear a hub feature
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ *
+ * Nothing to do, so no locking needed ;)
+ */
+static int wusbhc_rh_clear_hub_feat(struct wusbhc *wusbhc, u16 feature)
+{
+	int result;
+	struct device *dev = wusbhc->dev;
+
+	d_fnstart(4, dev, "(%p, feature 0x%04u)\n", wusbhc, feature);
+	switch (feature) {
+	case C_HUB_LOCAL_POWER:
+		/* FIXME: maybe plug bit 0 to the power input status,
+		 * if any?
+		 * see wusbhc_rh_get_hub_status() */
+	case C_HUB_OVER_CURRENT:
+		result = 0;
+		break;
+	default:
+		result = -EPIPE;
+	}
+	d_fnend(4, dev, "(%p, feature 0x%04u), %d\n", wusbhc, feature, result);
+	return result;
+}
+
+/*
+ * Return hub status (it is always zero...)
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ *
+ * Nothing to do, so no locking needed ;)
+ */
+static int wusbhc_rh_get_hub_status(struct wusbhc *wusbhc, u32 *buf,
+				    u16 wLength)
+{
+	/* FIXME: maybe plug bit 0 to the power input status (if any)? */
+	*buf = 0;
+	return 0;
+}
+
+/*
+ * Set a port feature
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ */
+static int wusbhc_rh_set_port_feat(struct wusbhc *wusbhc, u16 feature,
+				   u8 selector, u8 port_idx)
+{
+	int result = -EINVAL;
+	struct device *dev = wusbhc->dev;
+
+	d_fnstart(4, dev, "(feat 0x%04u, selector 0x%u, port_idx %d)\n",
+		  feature, selector, port_idx);
+
+	if (port_idx > wusbhc->ports_max)
+		goto error;
+
+	switch (feature) {
+		/* According to USB2.0[11.24.2.13]p2, these features
+		 * are not required to be implemented. */
+	case USB_PORT_FEAT_C_OVER_CURRENT:
+	case USB_PORT_FEAT_C_ENABLE:
+	case USB_PORT_FEAT_C_SUSPEND:
+	case USB_PORT_FEAT_C_CONNECTION:
+	case USB_PORT_FEAT_C_RESET:
+		result = 0;
+		break;
+
+	case USB_PORT_FEAT_POWER:
+		/* No such thing, but we fake it works */
+		mutex_lock(&wusbhc->mutex);
+		wusb_port_by_idx(wusbhc, port_idx)->status |= USB_PORT_STAT_POWER;
+		mutex_unlock(&wusbhc->mutex);
+		result = 0;
+		break;
+	case USB_PORT_FEAT_RESET:
+		result = wusbhc_rh_port_reset(wusbhc, port_idx);
+		break;
+	case USB_PORT_FEAT_ENABLE:
+	case USB_PORT_FEAT_SUSPEND:
+		dev_err(dev, "(port_idx %d) set feat %d/%d UNIMPLEMENTED\n",
+			port_idx, feature, selector);
+		result = -ENOSYS;
+		break;
+	default:
+		dev_err(dev, "(port_idx %d) set feat %d/%d UNKNOWN\n",
+			port_idx, feature, selector);
+		result = -EPIPE;
+		break;
+	}
+error:
+	d_fnend(4, dev, "(feat 0x%04u, selector 0x%u, port_idx %d) = %d\n",
+		feature, selector, port_idx, result);
+	return result;
+}
+
+/*
+ * Clear a port feature...
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ */
+static int wusbhc_rh_clear_port_feat(struct wusbhc *wusbhc, u16 feature,
+				     u8 selector, u8 port_idx)
+{
+	int result = -EINVAL;
+	struct device *dev = wusbhc->dev;
+
+	d_fnstart(4, dev, "(wusbhc %p feat 0x%04x selector %d port_idx %d)\n",
+		  wusbhc, feature, selector, port_idx);
+
+	if (port_idx > wusbhc->ports_max)
+		goto error;
+
+	mutex_lock(&wusbhc->mutex);
+	result = 0;
+	switch (feature) {
+	case USB_PORT_FEAT_POWER:	/* fake port always on */
+		/* According to USB2.0[11.24.2.7.1.4], no need to implement? */
+	case USB_PORT_FEAT_C_OVER_CURRENT:
+		break;
+	case USB_PORT_FEAT_C_RESET:
+		wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_RESET;
+		break;
+	case USB_PORT_FEAT_C_CONNECTION:
+		wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_CONNECTION;
+		break;
+	case USB_PORT_FEAT_ENABLE:
+		__wusbhc_dev_disable(wusbhc, port_idx);
+		break;
+	case USB_PORT_FEAT_C_ENABLE:
+		wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_ENABLE;
+		break;
+	case USB_PORT_FEAT_SUSPEND:
+	case USB_PORT_FEAT_C_SUSPEND:
+	case 0xffff:		/* ??? FIXME */
+		dev_err(dev, "(port_idx %d) Clear feat %d/%d UNIMPLEMENTED\n",
+			port_idx, feature, selector);
+		/* dump_stack(); */
+		result = -ENOSYS;
+		break;
+	default:
+		dev_err(dev, "(port_idx %d) Clear feat %d/%d UNKNOWN\n",
+			port_idx, feature, selector);
+		result = -EPIPE;
+		break;
+	}
+	mutex_unlock(&wusbhc->mutex);
+error:
+	d_fnend(4, dev, "(wusbhc %p feat 0x%04x selector %d port_idx %d) = "
+		"%d\n", wusbhc, feature, selector, port_idx, result);
+	return result;
+}
+
+/*
+ * Return the port's status
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ */
+static int wusbhc_rh_get_port_status(struct wusbhc *wusbhc, u16 port_idx,
+				     u32 *_buf, u16 wLength)
+{
+	int result = -EINVAL;
+	u16 *buf = (u16 *) _buf;
+
+	d_fnstart(1, wusbhc->dev, "(wusbhc %p port_idx %u wLength %u)\n",
+		  wusbhc, port_idx, wLength);
+	if (port_idx > wusbhc->ports_max)
+		goto error;
+	mutex_lock(&wusbhc->mutex);
+	buf[0] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->status);
+	buf[1] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->change);
+	result = 0;
+	mutex_unlock(&wusbhc->mutex);
+error:
+	d_fnend(1, wusbhc->dev, "(wusbhc %p) = %d, buffer:\n", wusbhc, result);
+	d_dump(1, wusbhc->dev, _buf, wLength);
+	return result;
+}
+
+/*
+ * Entry point for Root Hub operations
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ */
+int wusbhc_rh_control(struct usb_hcd *usb_hcd, u16 reqntype, u16 wValue,
+		      u16 wIndex, char *buf, u16 wLength)
+{
+	int result = -ENOSYS;
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+
+	switch (reqntype) {
+	case GetHubDescriptor:
+		result = wusbhc_rh_get_hub_descr(
+			wusbhc, wValue, wIndex,
+			(struct usb_hub_descriptor *) buf, wLength);
+		break;
+	case ClearHubFeature:
+		result = wusbhc_rh_clear_hub_feat(wusbhc, wValue);
+		break;
+	case GetHubStatus:
+		result = wusbhc_rh_get_hub_status(wusbhc, (u32 *)buf, wLength);
+		break;
+
+	case SetPortFeature:
+		result = wusbhc_rh_set_port_feat(wusbhc, wValue, wIndex >> 8,
+						 (wIndex & 0xff) - 1);
+		break;
+	case ClearPortFeature:
+		result = wusbhc_rh_clear_port_feat(wusbhc, wValue, wIndex >> 8,
+						   (wIndex & 0xff) - 1);
+		break;
+	case GetPortStatus:
+		result = wusbhc_rh_get_port_status(wusbhc, wIndex - 1,
+						   (u32 *)buf, wLength);
+		break;
+
+	case SetHubFeature:
+	default:
+		dev_err(wusbhc->dev, "%s (%p [%p], %x, %x, %x, %p, %x) "
+			"UNIMPLEMENTED\n", __func__, usb_hcd, wusbhc, reqntype,
+			wValue, wIndex, buf, wLength);
+		/* dump_stack(); */
+		result = -ENOSYS;
+	}
+	return result;
+}
+EXPORT_SYMBOL_GPL(wusbhc_rh_control);
+
+int wusbhc_rh_suspend(struct usb_hcd *usb_hcd)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__,
+		usb_hcd, wusbhc);
+	/* dump_stack(); */
+	return -ENOSYS;
+}
+EXPORT_SYMBOL_GPL(wusbhc_rh_suspend);
+
+int wusbhc_rh_resume(struct usb_hcd *usb_hcd)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__,
+		usb_hcd, wusbhc);
+	/* dump_stack(); */
+	return -ENOSYS;
+}
+EXPORT_SYMBOL_GPL(wusbhc_rh_resume);
+
+int wusbhc_rh_start_port_reset(struct usb_hcd *usb_hcd, unsigned port_idx)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	dev_err(wusbhc->dev, "%s (%p [%p], port_idx %u) UNIMPLEMENTED\n",
+		__func__, usb_hcd, wusbhc, port_idx);
+	WARN_ON(1);
+	return -ENOSYS;
+}
+EXPORT_SYMBOL_GPL(wusbhc_rh_start_port_reset);
+
+static void wusb_port_init(struct wusb_port *port)
+{
+	port->status |= USB_PORT_STAT_HIGH_SPEED;
+}
+
+/*
+ * Alloc fake port specific fields and status.
+ */
+int wusbhc_rh_create(struct wusbhc *wusbhc)
+{
+	int result = -ENOMEM;
+	size_t port_size, itr;
+	port_size = wusbhc->ports_max * sizeof(wusbhc->port[0]);
+	wusbhc->port = kzalloc(port_size, GFP_KERNEL);
+	if (wusbhc->port == NULL)
+		goto error_port_alloc;
+	for (itr = 0; itr < wusbhc->ports_max; itr++)
+		wusb_port_init(&wusbhc->port[itr]);
+	result = 0;
+error_port_alloc:
+	return result;
+}
+
+void wusbhc_rh_destroy(struct wusbhc *wusbhc)
+{
+	kfree(wusbhc->port);
+}