Merge tag 'v3.5-soc' of git://gitorious.org/linux-davinci/linux-davinci into next/drivers

DaVinci SoC updates for v3.5

This pull request updates the DaVinci SoC support to implement DEBUG_LL port
choice and optimizes the DMA ISR by removing unnecessary register reads.

* tag 'v3.5-soc' of git://gitorious.org/linux-davinci/linux-davinci:
  ARM: davinci: optimize the DMA ISR
  ARM: davinci: implement DEBUG_LL port choice
  + sync with Linux 3.4-rc6

Signed-off-by: Olof Johansson <olof@lixom.net>

2 files changed, 203 insertions, 181 deletions

diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 01bb7241d6ef..fe8dc069164e 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -144,6 +144,14 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 			hcd->has_tt = 1;
 			tdi_reset(ehci);
 		}
+		if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) {
+			/* EHCI #1 or #2 on 6 Series/C200 Series chipset */
+			if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) {
+				ehci_info(ehci, "broken D3 during system sleep on ASUS\n");
+				hcd->broken_pci_sleep = 1;
+				device_set_wakeup_capable(&pdev->dev, false);
+			}
+		}
 		break;
 	case PCI_VENDOR_ID_TDI:
 		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 10bb3ea276f9..99ae5ea3f8d1 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -24,6 +24,7 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
+#include <linux/pm_runtime.h>
 
 #include <mach/usb_phy.h>
 #include <mach/iomap.h>
@@ -37,9 +38,7 @@ struct tegra_ehci_hcd {
 	struct clk *emc_clk;
 	struct usb_phy *transceiver;
 	int host_resumed;
-	int bus_suspended;
 	int port_resuming;
-	int power_down_on_bus_suspend;
 	enum tegra_usb_phy_port_speed port_speed;
 };
 
@@ -273,120 +272,6 @@ static void tegra_ehci_restart(struct usb_hcd *hcd)
 	up_write(&ehci_cf_port_reset_rwsem);
 }
 
-static int tegra_usb_suspend(struct usb_hcd *hcd)
-{
-	struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
-	struct ehci_regs __iomem *hw = tegra->ehci->regs;
-	unsigned long flags;
-
-	spin_lock_irqsave(&tegra->ehci->lock, flags);
-
-	tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3;
-	ehci_halt(tegra->ehci);
-	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
-	spin_unlock_irqrestore(&tegra->ehci->lock, flags);
-
-	tegra_ehci_power_down(hcd);
-	return 0;
-}
-
-static int tegra_usb_resume(struct usb_hcd *hcd)
-{
-	struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
-	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
-	struct ehci_regs __iomem *hw = ehci->regs;
-	unsigned long val;
-
-	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-	tegra_ehci_power_up(hcd);
-
-	if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) {
-		/* Wait for the phy to detect new devices
-		 * before we restart the controller */
-		msleep(10);
-		goto restart;
-	}
-
-	/* Force the phy to keep data lines in suspend state */
-	tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed);
-
-	/* Enable host mode */
-	tdi_reset(ehci);
-
-	/* Enable Port Power */
-	val = readl(&hw->port_status[0]);
-	val |= PORT_POWER;
-	writel(val, &hw->port_status[0]);
-	udelay(10);
-
-	/* Check if the phy resume from LP0. When the phy resume from LP0
-	 * USB register will be reset. */
-	if (!readl(&hw->async_next)) {
-		/* Program the field PTC based on the saved speed mode */
-		val = readl(&hw->port_status[0]);
-		val &= ~PORT_TEST(~0);
-		if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH)
-			val |= PORT_TEST_FORCE;
-		else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL)
-			val |= PORT_TEST(6);
-		else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
-			val |= PORT_TEST(7);
-		writel(val, &hw->port_status[0]);
-		udelay(10);
-
-		/* Disable test mode by setting PTC field to NORMAL_OP */
-		val = readl(&hw->port_status[0]);
-		val &= ~PORT_TEST(~0);
-		writel(val, &hw->port_status[0]);
-		udelay(10);
-	}
-
-	/* Poll until CCS is enabled */
-	if (handshake(ehci, &hw->port_status[0], PORT_CONNECT,
-						 PORT_CONNECT, 2000)) {
-		pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__);
-		goto restart;
-	}
-
-	/* Poll until PE is enabled */
-	if (handshake(ehci, &hw->port_status[0], PORT_PE,
-						 PORT_PE, 2000)) {
-		pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__);
-		goto restart;
-	}
-
-	/* Clear the PCI status, to avoid an interrupt taken upon resume */
-	val = readl(&hw->status);
-	val |= STS_PCD;
-	writel(val, &hw->status);
-
-	/* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */
-	val = readl(&hw->port_status[0]);
-	if ((val & PORT_POWER) && (val & PORT_PE)) {
-		val |= PORT_SUSPEND;
-		writel(val, &hw->port_status[0]);
-
-		/* Wait until port suspend completes */
-		if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND,
-							 PORT_SUSPEND, 1000)) {
-			pr_err("%s: timeout waiting for PORT_SUSPEND\n",
-								__func__);
-			goto restart;
-		}
-	}
-
-	tegra_ehci_phy_restore_end(tegra->phy);
-	return 0;
-
-restart:
-	if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH)
-		tegra_ehci_phy_restore_end(tegra->phy);
-
-	tegra_ehci_restart(hcd);
-	return 0;
-}
-
 static void tegra_ehci_shutdown(struct usb_hcd *hcd)
 {
 	struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
@@ -434,36 +319,6 @@ static int tegra_ehci_setup(struct usb_hcd *hcd)
 	return retval;
 }
 
-#ifdef CONFIG_PM
-static int tegra_ehci_bus_suspend(struct usb_hcd *hcd)
-{
-	struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
-	int error_status = 0;
-
-	error_status = ehci_bus_suspend(hcd);
-	if (!error_status && tegra->power_down_on_bus_suspend) {
-		tegra_usb_suspend(hcd);
-		tegra->bus_suspended = 1;
-	}
-
-	return error_status;
-}
-
-static int tegra_ehci_bus_resume(struct usb_hcd *hcd)
-{
-	struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
-
-	if (tegra->bus_suspended && tegra->power_down_on_bus_suspend) {
-		tegra_usb_resume(hcd);
-		tegra->bus_suspended = 0;
-	}
-
-	tegra_usb_phy_preresume(tegra->phy);
-	tegra->port_resuming = 1;
-	return ehci_bus_resume(hcd);
-}
-#endif
-
 struct temp_buffer {
 	void *kmalloc_ptr;
 	void *old_xfer_buffer;
@@ -574,8 +429,8 @@ static const struct hc_driver tegra_ehci_hc_driver = {
 	.hub_control		= tegra_ehci_hub_control,
 	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 #ifdef CONFIG_PM
-	.bus_suspend		= tegra_ehci_bus_suspend,
-	.bus_resume		= tegra_ehci_bus_resume,
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
 #endif
 	.relinquish_port	= ehci_relinquish_port,
 	.port_handed_over	= ehci_port_handed_over,
@@ -604,11 +459,187 @@ static int setup_vbus_gpio(struct platform_device *pdev,
 		dev_err(&pdev->dev, "can't enable vbus\n");
 		return err;
 	}
-	gpio_set_value(gpio, 1);
 
 	return err;
 }
 
+#ifdef CONFIG_PM
+
+static int controller_suspend(struct device *dev)
+{
+	struct tegra_ehci_hcd *tegra =
+			platform_get_drvdata(to_platform_device(dev));
+	struct ehci_hcd	*ehci = tegra->ehci;
+	struct usb_hcd *hcd = ehci_to_hcd(ehci);
+	struct ehci_regs __iomem *hw = ehci->regs;
+	unsigned long flags;
+
+	if (time_before(jiffies, ehci->next_statechange))
+		msleep(10);
+
+	spin_lock_irqsave(&ehci->lock, flags);
+
+	tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3;
+	ehci_halt(ehci);
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	spin_unlock_irqrestore(&ehci->lock, flags);
+
+	tegra_ehci_power_down(hcd);
+	return 0;
+}
+
+static int controller_resume(struct device *dev)
+{
+	struct tegra_ehci_hcd *tegra =
+			platform_get_drvdata(to_platform_device(dev));
+	struct ehci_hcd	*ehci = tegra->ehci;
+	struct usb_hcd *hcd = ehci_to_hcd(ehci);
+	struct ehci_regs __iomem *hw = ehci->regs;
+	unsigned long val;
+
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	tegra_ehci_power_up(hcd);
+
+	if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) {
+		/* Wait for the phy to detect new devices
+		 * before we restart the controller */
+		msleep(10);
+		goto restart;
+	}
+
+	/* Force the phy to keep data lines in suspend state */
+	tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed);
+
+	/* Enable host mode */
+	tdi_reset(ehci);
+
+	/* Enable Port Power */
+	val = readl(&hw->port_status[0]);
+	val |= PORT_POWER;
+	writel(val, &hw->port_status[0]);
+	udelay(10);
+
+	/* Check if the phy resume from LP0. When the phy resume from LP0
+	 * USB register will be reset. */
+	if (!readl(&hw->async_next)) {
+		/* Program the field PTC based on the saved speed mode */
+		val = readl(&hw->port_status[0]);
+		val &= ~PORT_TEST(~0);
+		if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH)
+			val |= PORT_TEST_FORCE;
+		else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL)
+			val |= PORT_TEST(6);
+		else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
+			val |= PORT_TEST(7);
+		writel(val, &hw->port_status[0]);
+		udelay(10);
+
+		/* Disable test mode by setting PTC field to NORMAL_OP */
+		val = readl(&hw->port_status[0]);
+		val &= ~PORT_TEST(~0);
+		writel(val, &hw->port_status[0]);
+		udelay(10);
+	}
+
+	/* Poll until CCS is enabled */
+	if (handshake(ehci, &hw->port_status[0], PORT_CONNECT,
+						 PORT_CONNECT, 2000)) {
+		pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__);
+		goto restart;
+	}
+
+	/* Poll until PE is enabled */
+	if (handshake(ehci, &hw->port_status[0], PORT_PE,
+						 PORT_PE, 2000)) {
+		pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__);
+		goto restart;
+	}
+
+	/* Clear the PCI status, to avoid an interrupt taken upon resume */
+	val = readl(&hw->status);
+	val |= STS_PCD;
+	writel(val, &hw->status);
+
+	/* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */
+	val = readl(&hw->port_status[0]);
+	if ((val & PORT_POWER) && (val & PORT_PE)) {
+		val |= PORT_SUSPEND;
+		writel(val, &hw->port_status[0]);
+
+		/* Wait until port suspend completes */
+		if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND,
+							 PORT_SUSPEND, 1000)) {
+			pr_err("%s: timeout waiting for PORT_SUSPEND\n",
+								__func__);
+			goto restart;
+		}
+	}
+
+	tegra_ehci_phy_restore_end(tegra->phy);
+	goto done;
+
+ restart:
+	if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH)
+		tegra_ehci_phy_restore_end(tegra->phy);
+
+	tegra_ehci_restart(hcd);
+
+ done:
+	tegra_usb_phy_preresume(tegra->phy);
+	tegra->port_resuming = 1;
+	return 0;
+}
+
+static int tegra_ehci_suspend(struct device *dev)
+{
+	struct tegra_ehci_hcd *tegra =
+			platform_get_drvdata(to_platform_device(dev));
+	struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
+	int rc = 0;
+
+	/*
+	 * When system sleep is supported and USB controller wakeup is
+	 * implemented: If the controller is runtime-suspended and the
+	 * wakeup setting needs to be changed, call pm_runtime_resume().
+	 */
+	if (HCD_HW_ACCESSIBLE(hcd))
+		rc = controller_suspend(dev);
+	return rc;
+}
+
+static int tegra_ehci_resume(struct device *dev)
+{
+	int rc;
+
+	rc = controller_resume(dev);
+	if (rc == 0) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+	}
+	return rc;
+}
+
+static int tegra_ehci_runtime_suspend(struct device *dev)
+{
+	return controller_suspend(dev);
+}
+
+static int tegra_ehci_runtime_resume(struct device *dev)
+{
+	return controller_resume(dev);
+}
+
+static const struct dev_pm_ops tegra_ehci_pm_ops = {
+	.suspend	= tegra_ehci_suspend,
+	.resume		= tegra_ehci_resume,
+	.runtime_suspend = tegra_ehci_runtime_suspend,
+	.runtime_resume	= tegra_ehci_runtime_resume,
+};
+
+#endif
+
 static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32);
 
 static int tegra_ehci_probe(struct platform_device *pdev)
@@ -724,7 +755,6 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 	}
 
 	tegra->host_resumed = 1;
-	tegra->power_down_on_bus_suspend = pdata->power_down_on_bus_suspend;
 	tegra->ehci = hcd_to_ehci(hcd);
 
 	irq = platform_get_irq(pdev, 0);
@@ -748,6 +778,14 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 		goto fail;
 	}
 
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_get_noresume(&pdev->dev);
+
+	/* Don't skip the pm_runtime_forbid call if wakeup isn't working */
+	/* if (!pdata->power_down_on_bus_suspend) */
+		pm_runtime_forbid(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_put_sync(&pdev->dev);
 	return err;
 
 fail:
@@ -774,33 +812,6 @@ fail_hcd:
 	return err;
 }
 
-#ifdef CONFIG_PM
-static int tegra_ehci_resume(struct platform_device *pdev)
-{
-	struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
-	struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
-
-	if (tegra->bus_suspended)
-		return 0;
-
-	return tegra_usb_resume(hcd);
-}
-
-static int tegra_ehci_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
-	struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
-
-	if (tegra->bus_suspended)
-		return 0;
-
-	if (time_before(jiffies, tegra->ehci->next_statechange))
-		msleep(10);
-
-	return tegra_usb_suspend(hcd);
-}
-#endif
-
 static int tegra_ehci_remove(struct platform_device *pdev)
 {
 	struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
@@ -809,6 +820,10 @@ static int tegra_ehci_remove(struct platform_device *pdev)
 	if (tegra == NULL || hcd == NULL)
 		return -EINVAL;
 
+	pm_runtime_get_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+
 #ifdef CONFIG_USB_OTG_UTILS
 	if (tegra->transceiver) {
 		otg_set_host(tegra->transceiver->otg, NULL);
@@ -849,13 +864,12 @@ static struct of_device_id tegra_ehci_of_match[] __devinitdata = {
 static struct platform_driver tegra_ehci_driver = {
 	.probe		= tegra_ehci_probe,
 	.remove		= tegra_ehci_remove,
-#ifdef CONFIG_PM
-	.suspend	= tegra_ehci_suspend,
-	.resume		= tegra_ehci_resume,
-#endif
 	.shutdown	= tegra_ehci_hcd_shutdown,
 	.driver		= {
 		.name	= "tegra-ehci",
 		.of_match_table = tegra_ehci_of_match,
+#ifdef CONFIG_PM
+		.pm	= &tegra_ehci_pm_ops,
+#endif
 	}
 };