OHCI: final fix for NVIDIA problems (I hope)

Problems with NVIDIA's OHCI host controllers persist.  After looking
carefully through the spec, I finally realized that when a controller
is reset it then automatically goes into a SUSPEND state in which it
is completely quiescent (no DMA and no IRQs) and from which it will
not awaken until the system puts it into the OPERATIONAL state.

Therefore there's no need to worry about controllers being in the
RESET state for extended periods, or remaining in the OPERATIONAL
state during system shutdown.  The proper action for device
initialization is to put the controller into the RESET state (if it's
not there already) and then to issue a software reset.  Similarly, the
proper action for device shutdown is simply to do a software reset.

This patch (as1499) implements such an approach.  It simplifies
initialization and shutdown, and allows the NVIDIA shutdown-quirk code
to be removed.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Andre "Osku" Schmidt <andre.osku.schmidt@googlemail.com>
Tested-by: Arno Augustin <Arno.Augustin@web.de>
Cc: stable <stable@vger.kernel.org> [after tested in 3.2 for a while]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 26 deletions

diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index ad8166c681e2..bc01b064585a 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -175,28 +175,6 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd)
 	return 0;
 }
 
-/* nVidia controllers continue to drive Reset signalling on the bus
- * even after system shutdown, wasting power.  This flag tells the
- * shutdown routine to leave the controller OPERATIONAL instead of RESET.
- */
-static int ohci_quirk_nvidia_shutdown(struct usb_hcd *hcd)
-{
-	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
-	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
-
-	/* Evidently nVidia fixed their later hardware; this is a guess at
-	 * the changeover point.
-	 */
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB		0x026d
-
-	if (pdev->device < PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB) {
-		ohci->flags |= OHCI_QUIRK_SHUTDOWN;
-		ohci_dbg(ohci, "enabled nVidia shutdown quirk\n");
-	}
-
-	return 0;
-}
-
 static void sb800_prefetch(struct ohci_hcd *ohci, int on)
 {
 	struct pci_dev *pdev;
@@ -260,10 +238,6 @@ static const struct pci_device_id ohci_pci_quirks[] = {
 		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
 		.driver_data = (unsigned long)ohci_quirk_amd700,
 	},
-	{
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID),
-		.driver_data = (unsigned long) ohci_quirk_nvidia_shutdown,
-	},
 
 	/* FIXME for some of the early AMD 760 southbridges, OHCI
 	 * won't work at all.  blacklist them.