Merge branch 'for-next/dwc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

* 'for-next/dwc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (392 commits)
  usb: dwc3: ep0: fix for possible early delayed_status
  usb: dwc3: gadget: fix stream enable bit
  usb: dwc3: ep0: fix GetStatus handling (again)
  usb: dwc3: ep0: use dwc3_request for ep0 requsts instead of usb_request
  usb: dwc3: use correct hwparam register for power mgm check
  usb: dwc3: omap: move to module_platform_driver
  usb: dwc3: workaround: missing disconnect event
  usb: dwc3: workaround: missing USB3 Reset event
  usb: dwc3: workaround: U1/U2 -> U0 transiton
  usb: dwc3: gadget: return early in dwc3_cleanup_done_reqs()
  usb: dwc3: ep0: handle delayed_status again
  usb: dwc3: ep0: push ep0state into xfernotready processing
  usb: dwc3: fix sparse errors
  usb: dwc3: fix few coding style problems
  usb: dwc3: move generic dwc3 code from gadget into core
  usb: dwc3: use a helper function for operation mode setting
  usb: dwc3: ep0: don't use ep0in for transfers
  usb: dwc3: ep0: use proper endianess in SetFeature for wIndex
  usb: dwc3: core: drop DWC3_EVENT_BUFFERS_MAX
  usb: dwc3: omap: add multiple instances support to OMAP
  ...

12 files changed, 55 insertions, 67 deletions

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 3162a7da8724..71108c26c562 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -319,18 +319,6 @@ config USB_PXA_U2O
 	  PXA9xx Processor series include a high speed USB2.0 device
 	  controller, which support high speed and full speed USB peripheral.
 
-config USB_GADGET_DWC3
-	tristate "DesignWare USB3.0 (DRD) Controller"
-	depends on USB_DWC3
-	select USB_GADGET_DUALSPEED
-	select USB_GADGET_SUPERSPEED
-	help
-	  DesignWare USB3.0 controller is a SuperSpeed USB3.0 Controller
-	  which can be configured for peripheral-only, host-only, hub-only
-	  and Dual-Role operation. This Controller was first integrated into
-	  the OMAP5 series of processors. More information about the OMAP5
-	  version of this controller, refer to http://www.ti.com/omap5.
-
 #
 # Controllers available in both integrated and discrete versions
 #
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 4730016d7cd4..45f422ac103f 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -1959,7 +1959,7 @@ static int amd5536_start(struct usb_gadget_driver *driver,
 	u32 tmp;
 
 	if (!driver || !bind || !driver->setup
-			|| driver->speed != USB_SPEED_HIGH)
+			|| driver->speed < USB_SPEED_HIGH)
 		return -EINVAL;
 	if (!dev)
 		return -ENODEV;
diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c
index 91fdf790ed20..cf33a8d0fd5d 100644
--- a/drivers/usb/gadget/f_serial.c
+++ b/drivers/usb/gadget/f_serial.c
@@ -131,8 +131,8 @@ static int gser_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 	}
 	if (!gser->port.in->desc || !gser->port.out->desc) {
 		DBG(cdev, "activate generic ttyGS%d\n", gser->port_num);
-		if (!config_ep_by_speed(cdev->gadget, f, gser->port.in) ||
-		    !config_ep_by_speed(cdev->gadget, f, gser->port.out)) {
+		if (config_ep_by_speed(cdev->gadget, f, gser->port.in) ||
+		    config_ep_by_speed(cdev->gadget, f, gser->port.out)) {
 			gser->port.in->desc = NULL;
 			gser->port.out->desc = NULL;
 			return -EINVAL;
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index 43a49ecc1f36..dcbc0a2e48dd 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -16,6 +16,7 @@
 #include <linux/err.h>
 #include <linux/fsl_devices.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 
@@ -88,7 +89,6 @@ eenahb:
 void fsl_udc_clk_finalize(struct platform_device *pdev)
 {
 	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-#if defined(CONFIG_SOC_IMX35)
 	if (cpu_is_mx35()) {
 		unsigned int v;
 
@@ -101,7 +101,6 @@ void fsl_udc_clk_finalize(struct platform_device *pdev)
 					USBPHYCTRL_OTGBASE_OFFSET));
 		}
 	}
-#endif
 
 	/* ULPI transceivers don't need usbpll */
 	if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 811ea76ae76e..f75c56a259a9 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -2336,8 +2336,7 @@ static int fsl_qe_start(struct usb_gadget_driver *driver,
 	if (!udc_controller)
 		return -ENODEV;
 
-	if (!driver || (driver->speed != USB_SPEED_FULL
-			&& driver->speed != USB_SPEED_HIGH)
+	if (!driver || driver->speed < USB_SPEED_FULL
 			|| !bind || !driver->disconnect || !driver->setup)
 		return -EINVAL;
 
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index b3b3d83b7c33..dd28ef3def71 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -696,12 +696,31 @@ static void fsl_free_request(struct usb_ep *_ep, struct usb_request *_req)
 		kfree(req);
 }
 
-/*-------------------------------------------------------------------------*/
+/* Actually add a dTD chain to an empty dQH and let go */
+static void fsl_prime_ep(struct fsl_ep *ep, struct ep_td_struct *td)
+{
+	struct ep_queue_head *qh = get_qh_by_ep(ep);
+
+	/* Write dQH next pointer and terminate bit to 0 */
+	qh->next_dtd_ptr = cpu_to_hc32(td->td_dma
+			& EP_QUEUE_HEAD_NEXT_POINTER_MASK);
+
+	/* Clear active and halt bit */
+	qh->size_ioc_int_sts &= cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE
+					| EP_QUEUE_HEAD_STATUS_HALT));
+
+	/* Ensure that updates to the QH will occur before priming. */
+	wmb();
+
+	/* Prime endpoint by writing correct bit to ENDPTPRIME */
+	fsl_writel(ep_is_in(ep) ? (1 << (ep_index(ep) + 16))
+			: (1 << (ep_index(ep))), &dr_regs->endpointprime);
+}
+
+/* Add dTD chain to the dQH of an EP */
 static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
 {
-	int i = ep_index(ep) * 2 + ep_is_in(ep);
 	u32 temp, bitmask, tmp_stat;
-	struct ep_queue_head *dQH = &ep->udc->ep_qh[i];
 
 	/* VDBG("QH addr Register 0x%8x", dr_regs->endpointlistaddr);
 	VDBG("ep_qh[%d] addr is 0x%8x", i, (u32)&(ep->udc->ep_qh[i])); */
@@ -719,7 +738,7 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
 			cpu_to_hc32(req->head->td_dma & DTD_ADDR_MASK);
 		/* Read prime bit, if 1 goto done */
 		if (fsl_readl(&dr_regs->endpointprime) & bitmask)
-			goto out;
+			return;
 
 		do {
 			/* Set ATDTW bit in USBCMD */
@@ -736,28 +755,10 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
 		fsl_writel(temp & ~USB_CMD_ATDTW, &dr_regs->usbcmd);
 
 		if (tmp_stat)
-			goto out;
+			return;
 	}
 
-	/* Write dQH next pointer and terminate bit to 0 */
-	temp = req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK;
-	dQH->next_dtd_ptr = cpu_to_hc32(temp);
-
-	/* Clear active and halt bit */
-	temp = cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE
-			| EP_QUEUE_HEAD_STATUS_HALT));
-	dQH->size_ioc_int_sts &= temp;
-
-	/* Ensure that updates to the QH will occur before priming. */
-	wmb();
-
-	/* Prime endpoint by writing 1 to ENDPTPRIME */
-	temp = ep_is_in(ep)
-		? (1 << (ep_index(ep) + 16))
-		: (1 << (ep_index(ep)));
-	fsl_writel(temp, &dr_regs->endpointprime);
-out:
-	return;
+	fsl_prime_ep(ep, req->head);
 }
 
 /* Fill in the dTD structure
@@ -877,7 +878,7 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 		VDBG("%s, bad ep", __func__);
 		return -EINVAL;
 	}
-	if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+	if (usb_endpoint_xfer_isoc(ep->desc)) {
 		if (req->req.length > ep->ep.maxpacket)
 			return -EMSGSIZE;
 	}
@@ -973,25 +974,20 @@ static int fsl_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 
 		/* The request isn't the last request in this ep queue */
 		if (req->queue.next != &ep->queue) {
-			struct ep_queue_head *qh;
 			struct fsl_req *next_req;
 
-			qh = ep->qh;
 			next_req = list_entry(req->queue.next, struct fsl_req,
 					queue);
 
-			/* Point the QH to the first TD of next request */
-			fsl_writel((u32) next_req->head, &qh->curr_dtd_ptr);
+			/* prime with dTD of next request */
+			fsl_prime_ep(ep, next_req->head);
 		}
-
-		/* The request hasn't been processed, patch up the TD chain */
+	/* The request hasn't been processed, patch up the TD chain */
 	} else {
 		struct fsl_req *prev_req;
 
 		prev_req = list_entry(req->queue.prev, struct fsl_req, queue);
-		fsl_writel(fsl_readl(&req->tail->next_td_ptr),
-				&prev_req->tail->next_td_ptr);
-
+		prev_req->tail->next_td_ptr = req->tail->next_td_ptr;
 	}
 
 	done(ep, req, -ECONNRESET);
@@ -1032,7 +1028,7 @@ static int fsl_ep_set_halt(struct usb_ep *_ep, int value)
 		goto out;
 	}
 
-	if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+	if (usb_endpoint_xfer_isoc(ep->desc)) {
 		status = -EOPNOTSUPP;
 		goto out;
 	}
@@ -1068,7 +1064,7 @@ static int fsl_ep_fifo_status(struct usb_ep *_ep)
 	struct fsl_udc *udc;
 	int size = 0;
 	u32 bitmask;
-	struct ep_queue_head *d_qh;
+	struct ep_queue_head *qh;
 
 	ep = container_of(_ep, struct fsl_ep, ep);
 	if (!_ep || (!ep->desc && ep_index(ep) != 0))
@@ -1079,13 +1075,13 @@ static int fsl_ep_fifo_status(struct usb_ep *_ep)
 	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
 		return -ESHUTDOWN;
 
-	d_qh = &ep->udc->ep_qh[ep_index(ep) * 2 + ep_is_in(ep)];
+	qh = get_qh_by_ep(ep);
 
 	bitmask = (ep_is_in(ep)) ? (1 << (ep_index(ep) + 16)) :
 	    (1 << (ep_index(ep)));
 
 	if (fsl_readl(&dr_regs->endptstatus) & bitmask)
-		size = (d_qh->size_ioc_int_sts & DTD_PACKET_SIZE)
+		size = (qh->size_ioc_int_sts & DTD_PACKET_SIZE)
 		    >> DTD_LENGTH_BIT_POS;
 
 	pr_debug("%s %u\n", __func__, size);
@@ -1938,8 +1934,7 @@ static int fsl_start(struct usb_gadget_driver *driver,
 	if (!udc_controller)
 		return -ENODEV;
 
-	if (!driver || (driver->speed != USB_SPEED_FULL
-				&& driver->speed != USB_SPEED_HIGH)
+	if (!driver || driver->speed < USB_SPEED_FULL
 			|| !bind || !driver->disconnect || !driver->setup)
 		return -EINVAL;
 
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index 1d51be83fda8..f781f5dec417 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -569,6 +569,16 @@ static void dump_msg(const char *label, const u8 * buf, unsigned int length)
 					* 2 + ((windex & USB_DIR_IN) ? 1 : 0))
 #define get_pipe_by_ep(EP)	(ep_index(EP) * 2 + ep_is_in(EP))
 
+static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep)
+{
+	/* we only have one ep0 structure but two queue heads */
+	if (ep_index(ep) != 0)
+		return ep->qh;
+	else
+		return &ep->udc->ep_qh[(ep->udc->ep0_dir ==
+				USB_DIR_IN) ? 1 : 0];
+}
+
 struct platform_device;
 #ifdef CONFIG_ARCH_MXC
 int fsl_udc_clk_init(struct platform_device *pdev);
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 91d0af2a24a8..9aa1cbbee45b 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -1472,7 +1472,7 @@ static int m66592_start(struct usb_gadget_driver *driver,
 	int retval;
 
 	if (!driver
-			|| driver->speed != USB_SPEED_HIGH
+			|| driver->speed < USB_SPEED_HIGH
 			|| !bind
 			|| !driver->setup)
 		return -EINVAL;
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 7f1bc9a73cda..da2b9d0be3ca 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -1881,7 +1881,7 @@ static int net2280_start(struct usb_gadget *_gadget,
 	 * (dev->usb->xcvrdiag & FORCE_FULL_SPEED_MODE)
 	 * "must not be used in normal operation"
 	 */
-	if (!driver || driver->speed != USB_SPEED_HIGH
+	if (!driver || driver->speed < USB_SPEED_HIGH
 			|| !driver->setup)
 		return -EINVAL;
 
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 24f84b210ce1..fc719a3f8557 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1746,7 +1746,7 @@ static int r8a66597_start(struct usb_gadget *gadget,
 	struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget);
 
 	if (!driver
-			|| driver->speed != USB_SPEED_HIGH
+			|| driver->speed < USB_SPEED_HIGH
 			|| !driver->setup)
 		return -EINVAL;
 	if (!r8a66597)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 745a3081fb37..c59156c0061d 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2586,10 +2586,8 @@ static int s3c_hsotg_start(struct usb_gadget_driver *driver,
 		return -EINVAL;
 	}
 
-	if (driver->speed != USB_SPEED_HIGH &&
-	    driver->speed != USB_SPEED_FULL) {
+	if (driver->speed < USB_SPEED_FULL)
 		dev_err(hsotg->dev, "%s: bad speed\n", __func__);
-	}
 
 	if (!bind || !driver->setup) {
 		dev_err(hsotg->dev, "%s: missing entry points\n", __func__);
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index baf506a66ded..787ac5baae92 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -1142,8 +1142,7 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver,
 	int ret;
 
 	if (!driver
-		|| (driver->speed != USB_SPEED_FULL &&
-			driver->speed != USB_SPEED_HIGH)
+		|| driver->speed < USB_SPEED_FULL
 		|| !bind
 		|| !driver->unbind || !driver->disconnect || !driver->setup)
 		return -EINVAL;