diff options
| author | Sarah Sharp <sarah.a.sharp@linux.intel.com> | 2012-07-03 23:22:38 -0700 |
|---|---|---|
| committer | Sarah Sharp <sarah.a.sharp@linux.intel.com> | 2012-07-11 07:06:46 -0400 |
| commit | 9cf65991dd93ac3d5f97f536171c388918b7c1a9 (patch) | |
| tree | 06d01607f5667fe43cca031bbeef94bd2cfec5ec /drivers/usb/core/usb.c | |
| parent | 6d1d051330ee096f575523647fbd8ffe703600b5 (diff) | |
| download | blackbird-op-linux-9cf65991dd93ac3d5f97f536171c388918b7c1a9.tar.gz blackbird-op-linux-9cf65991dd93ac3d5f97f536171c388918b7c1a9.zip | |
USB: Disable LPM while the device is unconfigured.
The USB 3.0 Set/Clear Feature U1/U2 Enable cannot be sent to a device in
the Default or Addressed state. It can only be sent to a configured
device. Change the USB core to initialize the LPM disable count to 1
(disabled), which reflects this limitation.
Change usb_set_configuration() to ensure that if the device is
unconfigured on entry, usb_lpm_disable() is not called. This avoids
sending the Clear Feature U1/U2 when the device is in the Addressed
state. When usb_set_configuration() exits with a successfully installed
configuration, usb_lpm_enable() will be called.
Once the new configuration is installed, make sure
usb_set_configuration() only calls usb_enable_lpm() if the device moved
to the Configured state. If we have unconfigured the device by sending
it a Set Configuration for config 0, don't enable LPM.
This commit should be backported to kernels as old as 3.5, that contain
the commit 8306095fd2c1100e8244c09bf560f97aca5a311d "USB: Disable USB
3.0 LPM in critical sections."
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@vger.kernel.org
Diffstat (limited to 'drivers/usb/core/usb.c')
| -rw-r--r-- | drivers/usb/core/usb.c | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 25d0c61c3f8a..cd8fb44a3e16 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -396,6 +396,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent, dev->dev.dma_mask = bus->controller->dma_mask; set_dev_node(&dev->dev, dev_to_node(bus->controller)); dev->state = USB_STATE_ATTACHED; + dev->lpm_disable_count = 1; atomic_set(&dev->urbnum, 0); INIT_LIST_HEAD(&dev->ep0.urb_list); |
