summaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
authorRussell King <rmk+kernel@arm.linux.org.uk>2012-10-06 10:50:58 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2012-11-04 12:14:20 +0000
commitf91b55ab72a913a8a61e377a7766772a20f0d96b (patch)
treea572b4b120875fad21b0c1543efb10e3cd06e8aa /drivers/tty
parent4073a53b36ff993f7c4d158d1cf30d93c7d12add (diff)
downloadblackbird-op-linux-f91b55ab72a913a8a61e377a7766772a20f0d96b.tar.gz
blackbird-op-linux-f91b55ab72a913a8a61e377a7766772a20f0d96b.zip
SERIAL: omap: move driver private definitions and structures to driver
struct uart_omap_port and struct uart_omap_dma, and associated definitions are private to the driver, so there's no point them sitting in an include file under arch/arm. Move them into the driver itself. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/omap-serial.c52
1 files changed, 52 insertions, 0 deletions
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index da46be3d57b1..17babde8febf 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -44,6 +44,8 @@
#include <plat/omap-serial.h>
+#define OMAP_MAX_HSUART_PORTS 6
+
#define UART_BUILD_REVISION(x, y) (((x) << 8) | (y))
#define OMAP_UART_REV_42 0x0402
@@ -51,10 +53,14 @@
#define OMAP_UART_REV_52 0x0502
#define OMAP_UART_REV_63 0x0603
+#define UART_ERRATA_i202_MDR1_ACCESS BIT(0)
+#define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1)
+
#define DEFAULT_CLK_SPEED 48000000 /* 48Mhz*/
/* SCR register bitmasks */
#define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK (1 << 7)
+#define OMAP_UART_SCR_TX_EMPTY (1 << 3)
/* FCR register bitmasks */
#define OMAP_UART_FCR_RX_FIFO_TRIG_MASK (0x3 << 6)
@@ -71,6 +77,52 @@
#define OMAP_UART_MVR_MAJ_SHIFT 8
#define OMAP_UART_MVR_MIN_MASK 0x3f
+#define OMAP_UART_DMA_CH_FREE -1
+
+#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
+#define OMAP_MODE13X_SPEED 230400
+
+/* WER = 0x7F
+ * Enable module level wakeup in WER reg
+ */
+#define OMAP_UART_WER_MOD_WKUP 0X7F
+
+/* Enable XON/XOFF flow control on output */
+#define OMAP_UART_SW_TX 0x4
+
+/* Enable XON/XOFF flow control on input */
+#define OMAP_UART_SW_RX 0x4
+
+#define OMAP_UART_SW_CLR 0xF0
+
+#define OMAP_UART_TCR_TRIG 0x0F
+
+struct uart_omap_dma {
+ u8 uart_dma_tx;
+ u8 uart_dma_rx;
+ int rx_dma_channel;
+ int tx_dma_channel;
+ dma_addr_t rx_buf_dma_phys;
+ dma_addr_t tx_buf_dma_phys;
+ unsigned int uart_base;
+ /*
+ * Buffer for rx dma.It is not required for tx because the buffer
+ * comes from port structure.
+ */
+ unsigned char *rx_buf;
+ unsigned int prev_rx_dma_pos;
+ int tx_buf_size;
+ int tx_dma_used;
+ int rx_dma_used;
+ spinlock_t tx_lock;
+ spinlock_t rx_lock;
+ /* timer to poll activity on rx dma */
+ struct timer_list rx_timer;
+ unsigned int rx_buf_size;
+ unsigned int rx_poll_rate;
+ unsigned int rx_timeout;
+};
+
struct uart_omap_port {
struct uart_port port;
struct uart_omap_dma uart_dma;
OpenPOWER on IntegriCloud