Merge tag 'tty-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty into next

Pull tty/serial driver updates from Greg KH:
 "Here is the big tty / serial driver pull request for 3.16-rc1.

  A variety of different serial driver fixes and updates and additions,
  nothing huge, and no real major core tty changes at all.

  All have been in linux-next for a while"

* tag 'tty-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (84 commits)
  Revert "serial: imx: remove the DMA wait queue"
  serial: kgdb_nmi: Improve console integration with KDB I/O
  serial: kgdb_nmi: Switch from tasklets to real timers
  serial: kgdb_nmi: Use container_of() to locate private data
  serial: cpm_uart: No LF conversion in put_poll_char()
  serial: sirf: Fix compilation failure
  console: Remove superfluous readonly check
  console: Use explicit pointer type for vc_uni_pagedir* fields
  vgacon: Fix & cleanup refcounting
  ARM: tty: Move HVC DCC assembly to arch/arm
  tty/hvc/hvc_console: Fix wakeup of HVC thread on hvc_kick()
  drivers/tty/n_hdlc.c: replace kmalloc/memset by kzalloc
  vt: emulate 8- and 24-bit colour codes.
  printk/of_serial: fix serial console cessation part way through boot.
  serial: 8250_dma: check the result of TX buffer mapping
  serial: uart: add hw flow control support configuration
  tty/serial: at91: add interrupts for modem control lines
  tty/serial: at91: use mctrl_gpio helpers
  tty/serial: Add GPIOLIB helpers for controlling modem lines
  ARM: at91: gpio: implement get_direction
  ...

1 files changed, 16 insertions, 23 deletions

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 3b6c1a2e25de..e2f93874989b 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -116,7 +116,7 @@
 #define UCR3_DSR	(1<<10) /* Data set ready */
 #define UCR3_DCD	(1<<9)	/* Data carrier detect */
 #define UCR3_RI		(1<<8)	/* Ring indicator */
-#define UCR3_TIMEOUTEN	(1<<7)	/* Timeout interrupt enable */
+#define UCR3_ADNIMP	(1<<7)	/* Autobaud Detection Not Improved */
 #define UCR3_RXDSEN	(1<<6)	/* Receive status interrupt enable */
 #define UCR3_AIRINTEN	(1<<5)	/* Async IR wake interrupt enable */
 #define UCR3_AWAKEN	(1<<4)	/* Async wake interrupt enable */
@@ -444,6 +444,10 @@ static void imx_stop_rx(struct uart_port *port)
 
 	temp = readl(sport->port.membase + UCR2);
 	writel(temp & ~UCR2_RXEN, sport->port.membase + UCR2);
+
+	/* disable the `Receiver Ready Interrrupt` */
+	temp = readl(sport->port.membase + UCR1);
+	writel(temp & ~UCR1_RRDYEN, sport->port.membase + UCR1);
 }
 
 /*
@@ -1070,7 +1074,7 @@ static void imx_disable_dma(struct imx_port *sport)
 static int imx_startup(struct uart_port *port)
 {
 	struct imx_port *sport = (struct imx_port *)port;
-	int retval;
+	int retval, i;
 	unsigned long flags, temp;
 
 	retval = clk_prepare_enable(sport->clk_per);
@@ -1098,17 +1102,15 @@ static int imx_startup(struct uart_port *port)
 
 	writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
 
-	if (USE_IRDA(sport)) {
-		/* reset fifo's and state machines */
-		int i = 100;
-		temp = readl(sport->port.membase + UCR2);
-		temp &= ~UCR2_SRST;
-		writel(temp, sport->port.membase + UCR2);
-		while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) &&
-		    (--i > 0)) {
-			udelay(1);
-		}
-	}
+	/* Reset fifo's and state machines */
+	i = 100;
+
+	temp = readl(sport->port.membase + UCR2);
+	temp &= ~UCR2_SRST;
+	writel(temp, sport->port.membase + UCR2);
+
+	while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0))
+		udelay(1);
 
 	/*
 	 * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
@@ -1163,18 +1165,9 @@ static int imx_startup(struct uart_port *port)
 		temp |= UCR2_IRTS;
 	writel(temp, sport->port.membase + UCR2);
 
-	if (USE_IRDA(sport)) {
-		/* clear RX-FIFO */
-		int i = 64;
-		while ((--i > 0) &&
-			(readl(sport->port.membase + URXD0) & URXD_CHARRDY)) {
-			barrier();
-		}
-	}
-
 	if (!is_imx1_uart(sport)) {
 		temp = readl(sport->port.membase + UCR3);
-		temp |= IMX21_UCR3_RXDMUXSEL;
+		temp |= IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP;
 		writel(temp, sport->port.membase + UCR3);
 	}