Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:
	net/sched/sch_hfsc.c
	net/sched/sch_htb.c
	net/sched/sch_tbf.c

1 files changed, 1519 insertions, 0 deletions

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
new file mode 100644
index 000000000000..e76d7d000128
--- /dev/null
+++ b/drivers/tty/serial/amba-pl011.c
@@ -0,0 +1,1519 @@
+/*
+ *  linux/drivers/char/amba.c
+ *
+ *  Driver for AMBA serial ports
+ *
+ *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ *  Copyright 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *  Copyright (C) 2010 ST-Ericsson SA
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * This is a generic driver for ARM AMBA-type serial ports.  They
+ * have a lot of 16550-like features, but are not register compatible.
+ * Note that although they do have CTS, DCD and DSR inputs, they do
+ * not have an RI input, nor do they have DTR or RTS outputs.  If
+ * required, these have to be supplied via some other means (eg, GPIO)
+ * and hooked into this driver.
+ */
+
+#if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+
+#include <asm/io.h>
+#include <asm/sizes.h>
+
+#define UART_NR			14
+
+#define SERIAL_AMBA_MAJOR	204
+#define SERIAL_AMBA_MINOR	64
+#define SERIAL_AMBA_NR		UART_NR
+
+#define AMBA_ISR_PASS_LIMIT	256
+
+#define UART_DR_ERROR		(UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
+#define UART_DUMMY_DR_RX	(1 << 16)
+
+/* There is by now at least one vendor with differing details, so handle it */
+struct vendor_data {
+	unsigned int		ifls;
+	unsigned int		fifosize;
+	unsigned int		lcrh_tx;
+	unsigned int		lcrh_rx;
+	bool			oversampling;
+	bool			dma_threshold;
+};
+
+static struct vendor_data vendor_arm = {
+	.ifls			= UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+	.fifosize		= 16,
+	.lcrh_tx		= UART011_LCRH,
+	.lcrh_rx		= UART011_LCRH,
+	.oversampling		= false,
+	.dma_threshold		= false,
+};
+
+static struct vendor_data vendor_st = {
+	.ifls			= UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
+	.fifosize		= 64,
+	.lcrh_tx		= ST_UART011_LCRH_TX,
+	.lcrh_rx		= ST_UART011_LCRH_RX,
+	.oversampling		= true,
+	.dma_threshold		= true,
+};
+
+/* Deals with DMA transactions */
+struct pl011_dmatx_data {
+	struct dma_chan		*chan;
+	struct scatterlist	sg;
+	char			*buf;
+	bool			queued;
+};
+
+/*
+ * We wrap our port structure around the generic uart_port.
+ */
+struct uart_amba_port {
+	struct uart_port	port;
+	struct clk		*clk;
+	const struct vendor_data *vendor;
+	unsigned int		dmacr;		/* dma control reg */
+	unsigned int		im;		/* interrupt mask */
+	unsigned int		old_status;
+	unsigned int		fifosize;	/* vendor-specific */
+	unsigned int		lcrh_tx;	/* vendor-specific */
+	unsigned int		lcrh_rx;	/* vendor-specific */
+	bool			autorts;
+	char			type[12];
+#ifdef CONFIG_DMA_ENGINE
+	/* DMA stuff */
+	bool			using_dma;
+	struct pl011_dmatx_data	dmatx;
+#endif
+};
+
+/*
+ * All the DMA operation mode stuff goes inside this ifdef.
+ * This assumes that you have a generic DMA device interface,
+ * no custom DMA interfaces are supported.
+ */
+#ifdef CONFIG_DMA_ENGINE
+
+#define PL011_DMA_BUFFER_SIZE PAGE_SIZE
+
+static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
+{
+	/* DMA is the sole user of the platform data right now */
+	struct amba_pl011_data *plat = uap->port.dev->platform_data;
+	struct dma_slave_config tx_conf = {
+		.dst_addr = uap->port.mapbase + UART01x_DR,
+		.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
+		.direction = DMA_TO_DEVICE,
+		.dst_maxburst = uap->fifosize >> 1,
+	};
+	struct dma_chan *chan;
+	dma_cap_mask_t mask;
+
+	/* We need platform data */
+	if (!plat || !plat->dma_filter) {
+		dev_info(uap->port.dev, "no DMA platform data\n");
+		return;
+	}
+
+	/* Try to acquire a generic DMA engine slave channel */
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	chan = dma_request_channel(mask, plat->dma_filter, plat->dma_tx_param);
+	if (!chan) {
+		dev_err(uap->port.dev, "no TX DMA channel!\n");
+		return;
+	}
+
+	dmaengine_slave_config(chan, &tx_conf);
+	uap->dmatx.chan = chan;
+
+	dev_info(uap->port.dev, "DMA channel TX %s\n",
+		 dma_chan_name(uap->dmatx.chan));
+}
+
+#ifndef MODULE
+/*
+ * Stack up the UARTs and let the above initcall be done at device
+ * initcall time, because the serial driver is called as an arch
+ * initcall, and at this time the DMA subsystem is not yet registered.
+ * At this point the driver will switch over to using DMA where desired.
+ */
+struct dma_uap {
+	struct list_head node;
+	struct uart_amba_port *uap;
+};
+
+static LIST_HEAD(pl011_dma_uarts);
+
+static int __init pl011_dma_initcall(void)
+{
+	struct list_head *node, *tmp;
+
+	list_for_each_safe(node, tmp, &pl011_dma_uarts) {
+		struct dma_uap *dmau = list_entry(node, struct dma_uap, node);
+		pl011_dma_probe_initcall(dmau->uap);
+		list_del(node);
+		kfree(dmau);
+	}
+	return 0;
+}
+
+device_initcall(pl011_dma_initcall);
+
+static void pl011_dma_probe(struct uart_amba_port *uap)
+{
+	struct dma_uap *dmau = kzalloc(sizeof(struct dma_uap), GFP_KERNEL);
+	if (dmau) {
+		dmau->uap = uap;
+		list_add_tail(&dmau->node, &pl011_dma_uarts);
+	}
+}
+#else
+static void pl011_dma_probe(struct uart_amba_port *uap)
+{
+	pl011_dma_probe_initcall(uap);
+}
+#endif
+
+static void pl011_dma_remove(struct uart_amba_port *uap)
+{
+	/* TODO: remove the initcall if it has not yet executed */
+	if (uap->dmatx.chan)
+		dma_release_channel(uap->dmatx.chan);
+}
+
+
+/* Forward declare this for the refill routine */
+static int pl011_dma_tx_refill(struct uart_amba_port *uap);
+
+/*
+ * The current DMA TX buffer has been sent.
+ * Try to queue up another DMA buffer.
+ */
+static void pl011_dma_tx_callback(void *data)
+{
+	struct uart_amba_port *uap = data;
+	struct pl011_dmatx_data *dmatx = &uap->dmatx;
+	unsigned long flags;
+	u16 dmacr;
+
+	spin_lock_irqsave(&uap->port.lock, flags);
+	if (uap->dmatx.queued)
+		dma_unmap_sg(dmatx->chan->device->dev, &dmatx->sg, 1,
+			     DMA_TO_DEVICE);
+
+	dmacr = uap->dmacr;
+	uap->dmacr = dmacr & ~UART011_TXDMAE;
+	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+
+	/*
+	 * If TX DMA was disabled, it means that we've stopped the DMA for
+	 * some reason (eg, XOFF received, or we want to send an X-char.)
+	 *
+	 * Note: we need to be careful here of a potential race between DMA
+	 * and the rest of the driver - if the driver disables TX DMA while
+	 * a TX buffer completing, we must update the tx queued status to
+	 * get further refills (hence we check dmacr).
+	 */
+	if (!(dmacr & UART011_TXDMAE) || uart_tx_stopped(&uap->port) ||
+	    uart_circ_empty(&uap->port.state->xmit)) {
+		uap->dmatx.queued = false;
+		spin_unlock_irqrestore(&uap->port.lock, flags);
+		return;
+	}
+
+	if (pl011_dma_tx_refill(uap) <= 0) {
+		/*
+		 * We didn't queue a DMA buffer for some reason, but we
+		 * have data pending to be sent.  Re-enable the TX IRQ.
+		 */
+		uap->im |= UART011_TXIM;
+		writew(uap->im, uap->port.membase + UART011_IMSC);
+	}
+	spin_unlock_irqrestore(&uap->port.lock, flags);
+}
+
+/*
+ * Try to refill the TX DMA buffer.
+ * Locking: called with port lock held and IRQs disabled.
+ * Returns:
+ *   1 if we queued up a TX DMA buffer.
+ *   0 if we didn't want to handle this by DMA
+ *  <0 on error
+ */
+static int pl011_dma_tx_refill(struct uart_amba_port *uap)
+{
+	struct pl011_dmatx_data *dmatx = &uap->dmatx;
+	struct dma_chan *chan = dmatx->chan;
+	struct dma_device *dma_dev = chan->device;
+	struct dma_async_tx_descriptor *desc;
+	struct circ_buf *xmit = &uap->port.state->xmit;
+	unsigned int count;
+
+	/*
+	 * Try to avoid the overhead involved in using DMA if the
+	 * transaction fits in the first half of the FIFO, by using
+	 * the standard interrupt handling.  This ensures that we
+	 * issue a uart_write_wakeup() at the appropriate time.
+	 */
+	count = uart_circ_chars_pending(xmit);
+	if (count < (uap->fifosize >> 1)) {
+		uap->dmatx.queued = false;
+		return 0;
+	}
+
+	/*
+	 * Bodge: don't send the last character by DMA, as this
+	 * will prevent XON from notifying us to restart DMA.
+	 */
+	count -= 1;
+
+	/* Else proceed to copy the TX chars to the DMA buffer and fire DMA */
+	if (count > PL011_DMA_BUFFER_SIZE)
+		count = PL011_DMA_BUFFER_SIZE;
+
+	if (xmit->tail < xmit->head)
+		memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], count);
+	else {
+		size_t first = UART_XMIT_SIZE - xmit->tail;
+		size_t second = xmit->head;
+
+		memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], first);
+		if (second)
+			memcpy(&dmatx->buf[first], &xmit->buf[0], second);
+	}
+
+	dmatx->sg.length = count;
+
+	if (dma_map_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE) != 1) {
+		uap->dmatx.queued = false;
+		dev_dbg(uap->port.dev, "unable to map TX DMA\n");
+		return -EBUSY;
+	}
+
+	desc = dma_dev->device_prep_slave_sg(chan, &dmatx->sg, 1, DMA_TO_DEVICE,
+					     DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc) {
+		dma_unmap_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE);
+		uap->dmatx.queued = false;
+		/*
+		 * If DMA cannot be used right now, we complete this
+		 * transaction via IRQ and let the TTY layer retry.
+		 */
+		dev_dbg(uap->port.dev, "TX DMA busy\n");
+		return -EBUSY;
+	}
+
+	/* Some data to go along to the callback */
+	desc->callback = pl011_dma_tx_callback;
+	desc->callback_param = uap;
+
+	/* All errors should happen at prepare time */
+	dmaengine_submit(desc);
+
+	/* Fire the DMA transaction */
+	dma_dev->device_issue_pending(chan);
+
+	uap->dmacr |= UART011_TXDMAE;
+	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+	uap->dmatx.queued = true;
+
+	/*
+	 * Now we know that DMA will fire, so advance the ring buffer
+	 * with the stuff we just dispatched.
+	 */
+	xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
+	uap->port.icount.tx += count;
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(&uap->port);
+
+	return 1;
+}
+
+/*
+ * We received a transmit interrupt without a pending X-char but with
+ * pending characters.
+ * Locking: called with port lock held and IRQs disabled.
+ * Returns:
+ *   false if we want to use PIO to transmit
+ *   true if we queued a DMA buffer
+ */
+static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
+{
+	if (!uap->using_dma)
+		return false;
+
+	/*
+	 * If we already have a TX buffer queued, but received a
+	 * TX interrupt, it will be because we've just sent an X-char.
+	 * Ensure the TX DMA is enabled and the TX IRQ is disabled.
+	 */
+	if (uap->dmatx.queued) {
+		uap->dmacr |= UART011_TXDMAE;
+		writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+		uap->im &= ~UART011_TXIM;
+		writew(uap->im, uap->port.membase + UART011_IMSC);
+		return true;
+	}
+
+	/*
+	 * We don't have a TX buffer queued, so try to queue one.
+	 * If we succesfully queued a buffer, mask the TX IRQ.
+	 */
+	if (pl011_dma_tx_refill(uap) > 0) {
+		uap->im &= ~UART011_TXIM;
+		writew(uap->im, uap->port.membase + UART011_IMSC);
+		return true;
+	}
+	return false;
+}
+
+/*
+ * Stop the DMA transmit (eg, due to received XOFF).
+ * Locking: called with port lock held and IRQs disabled.
+ */
+static inline void pl011_dma_tx_stop(struct uart_amba_port *uap)
+{
+	if (uap->dmatx.queued) {
+		uap->dmacr &= ~UART011_TXDMAE;
+		writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+	}
+}
+
+/*
+ * Try to start a DMA transmit, or in the case of an XON/OFF
+ * character queued for send, try to get that character out ASAP.
+ * Locking: called with port lock held and IRQs disabled.
+ * Returns:
+ *   false if we want the TX IRQ to be enabled
+ *   true if we have a buffer queued
+ */
+static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
+{
+	u16 dmacr;
+
+	if (!uap->using_dma)
+		return false;
+
+	if (!uap->port.x_char) {
+		/* no X-char, try to push chars out in DMA mode */
+		bool ret = true;
+
+		if (!uap->dmatx.queued) {
+			if (pl011_dma_tx_refill(uap) > 0) {
+				uap->im &= ~UART011_TXIM;
+				ret = true;
+			} else {
+				uap->im |= UART011_TXIM;
+				ret = false;
+			}
+			writew(uap->im, uap->port.membase + UART011_IMSC);
+		} else if (!(uap->dmacr & UART011_TXDMAE)) {
+			uap->dmacr |= UART011_TXDMAE;
+			writew(uap->dmacr,
+				       uap->port.membase + UART011_DMACR);
+		}
+		return ret;
+	}
+
+	/*
+	 * We have an X-char to send.  Disable DMA to prevent it loading
+	 * the TX fifo, and then see if we can stuff it into the FIFO.
+	 */
+	dmacr = uap->dmacr;
+	uap->dmacr &= ~UART011_TXDMAE;
+	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+
+	if (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) {
+		/*
+		 * No space in the FIFO, so enable the transmit interrupt
+		 * so we know when there is space.  Note that once we've
+		 * loaded the character, we should just re-enable DMA.
+		 */
+		return false;
+	}
+
+	writew(uap->port.x_char, uap->port.membase + UART01x_DR);
+	uap->port.icount.tx++;
+	uap->port.x_char = 0;
+
+	/* Success - restore the DMA state */
+	uap->dmacr = dmacr;
+	writew(dmacr, uap->port.membase + UART011_DMACR);
+
+	return true;
+}
+
+/*
+ * Flush the transmit buffer.
+ * Locking: called with port lock held and IRQs disabled.
+ */
+static void pl011_dma_flush_buffer(struct uart_port *port)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+
+	if (!uap->using_dma)
+		return;
+
+	/* Avoid deadlock with the DMA engine callback */
+	spin_unlock(&uap->port.lock);
+	dmaengine_terminate_all(uap->dmatx.chan);
+	spin_lock(&uap->port.lock);
+	if (uap->dmatx.queued) {
+		dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1,
+			     DMA_TO_DEVICE);
+		uap->dmatx.queued = false;
+		uap->dmacr &= ~UART011_TXDMAE;
+		writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+	}
+}
+
+
+static void pl011_dma_startup(struct uart_amba_port *uap)
+{
+	if (!uap->dmatx.chan)
+		return;
+
+	uap->dmatx.buf = kmalloc(PL011_DMA_BUFFER_SIZE, GFP_KERNEL);
+	if (!uap->dmatx.buf) {
+		dev_err(uap->port.dev, "no memory for DMA TX buffer\n");
+		uap->port.fifosize = uap->fifosize;
+		return;
+	}
+
+	sg_init_one(&uap->dmatx.sg, uap->dmatx.buf, PL011_DMA_BUFFER_SIZE);
+
+	/* The DMA buffer is now the FIFO the TTY subsystem can use */
+	uap->port.fifosize = PL011_DMA_BUFFER_SIZE;
+	uap->using_dma = true;
+
+	/* Turn on DMA error (RX/TX will be enabled on demand) */
+	uap->dmacr |= UART011_DMAONERR;
+	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+
+	/*
+	 * ST Micro variants has some specific dma burst threshold
+	 * compensation. Set this to 16 bytes, so burst will only
+	 * be issued above/below 16 bytes.
+	 */
+	if (uap->vendor->dma_threshold)
+		writew(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16,
+			       uap->port.membase + ST_UART011_DMAWM);
+}
+
+static void pl011_dma_shutdown(struct uart_amba_port *uap)
+{
+	if (!uap->using_dma)
+		return;
+
+	/* Disable RX and TX DMA */
+	while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
+		barrier();
+
+	spin_lock_irq(&uap->port.lock);
+	uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE);
+	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+	spin_unlock_irq(&uap->port.lock);
+
+	/* In theory, this should already be done by pl011_dma_flush_buffer */
+	dmaengine_terminate_all(uap->dmatx.chan);
+	if (uap->dmatx.queued) {
+		dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1,
+			     DMA_TO_DEVICE);
+		uap->dmatx.queued = false;
+	}
+
+	kfree(uap->dmatx.buf);
+
+	uap->using_dma = false;
+}
+
+#else
+/* Blank functions if the DMA engine is not available */
+static inline void pl011_dma_probe(struct uart_amba_port *uap)
+{
+}
+
+static inline void pl011_dma_remove(struct uart_amba_port *uap)
+{
+}
+
+static inline void pl011_dma_startup(struct uart_amba_port *uap)
+{
+}
+
+static inline void pl011_dma_shutdown(struct uart_amba_port *uap)
+{
+}
+
+static inline bool pl011_dma_tx_irq(struct uart_amba_port *uap)
+{
+	return false;
+}
+
+static inline void pl011_dma_tx_stop(struct uart_amba_port *uap)
+{
+}
+
+static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
+{
+	return false;
+}
+
+#define pl011_dma_flush_buffer	NULL
+#endif
+
+
+static void pl011_stop_tx(struct uart_port *port)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+
+	uap->im &= ~UART011_TXIM;
+	writew(uap->im, uap->port.membase + UART011_IMSC);
+	pl011_dma_tx_stop(uap);
+}
+
+static void pl011_start_tx(struct uart_port *port)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+
+	if (!pl011_dma_tx_start(uap)) {
+		uap->im |= UART011_TXIM;
+		writew(uap->im, uap->port.membase + UART011_IMSC);
+	}
+}
+
+static void pl011_stop_rx(struct uart_port *port)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+
+	uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM|
+		     UART011_PEIM|UART011_BEIM|UART011_OEIM);
+	writew(uap->im, uap->port.membase + UART011_IMSC);
+}
+
+static void pl011_enable_ms(struct uart_port *port)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+
+	uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM;
+	writew(uap->im, uap->port.membase + UART011_IMSC);
+}
+
+static void pl011_rx_chars(struct uart_amba_port *uap)
+{
+	struct tty_struct *tty = uap->port.state->port.tty;
+	unsigned int status, ch, flag, max_count = 256;
+
+	status = readw(uap->port.membase + UART01x_FR);
+	while ((status & UART01x_FR_RXFE) == 0 && max_count--) {
+		ch = readw(uap->port.membase + UART01x_DR) | UART_DUMMY_DR_RX;
+		flag = TTY_NORMAL;
+		uap->port.icount.rx++;
+
+		/*
+		 * Note that the error handling code is
+		 * out of the main execution path
+		 */
+		if (unlikely(ch & UART_DR_ERROR)) {
+			if (ch & UART011_DR_BE) {
+				ch &= ~(UART011_DR_FE | UART011_DR_PE);
+				uap->port.icount.brk++;
+				if (uart_handle_break(&uap->port))
+					goto ignore_char;
+			} else if (ch & UART011_DR_PE)
+				uap->port.icount.parity++;
+			else if (ch & UART011_DR_FE)
+				uap->port.icount.frame++;
+			if (ch & UART011_DR_OE)
+				uap->port.icount.overrun++;
+
+			ch &= uap->port.read_status_mask;
+
+			if (ch & UART011_DR_BE)
+				flag = TTY_BREAK;
+			else if (ch & UART011_DR_PE)
+				flag = TTY_PARITY;
+			else if (ch & UART011_DR_FE)
+				flag = TTY_FRAME;
+		}
+
+		if (uart_handle_sysrq_char(&uap->port, ch & 255))
+			goto ignore_char;
+
+		uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
+
+	ignore_char:
+		status = readw(uap->port.membase + UART01x_FR);
+	}
+	spin_unlock(&uap->port.lock);
+	tty_flip_buffer_push(tty);
+	spin_lock(&uap->port.lock);
+}
+
+static void pl011_tx_chars(struct uart_amba_port *uap)
+{
+	struct circ_buf *xmit = &uap->port.state->xmit;
+	int count;
+
+	if (uap->port.x_char) {
+		writew(uap->port.x_char, uap->port.membase + UART01x_DR);
+		uap->port.icount.tx++;
+		uap->port.x_char = 0;
+		return;
+	}
+	if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) {
+		pl011_stop_tx(&uap->port);
+		return;
+	}
+
+	/* If we are using DMA mode, try to send some characters. */
+	if (pl011_dma_tx_irq(uap))
+		return;
+
+	count = uap->fifosize >> 1;
+	do {
+		writew(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		uap->port.icount.tx++;
+		if (uart_circ_empty(xmit))
+			break;
+	} while (--count > 0);
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(&uap->port);
+
+	if (uart_circ_empty(xmit))
+		pl011_stop_tx(&uap->port);
+}
+
+static void pl011_modem_status(struct uart_amba_port *uap)
+{
+	unsigned int status, delta;
+
+	status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
+
+	delta = status ^ uap->old_status;
+	uap->old_status = status;
+
+	if (!delta)
+		return;
+
+	if (delta & UART01x_FR_DCD)
+		uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD);
+
+	if (delta & UART01x_FR_DSR)
+		uap->port.icount.dsr++;
+
+	if (delta & UART01x_FR_CTS)
+		uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
+
+	wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
+}
+
+static irqreturn_t pl011_int(int irq, void *dev_id)
+{
+	struct uart_amba_port *uap = dev_id;
+	unsigned long flags;
+	unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
+	int handled = 0;
+
+	spin_lock_irqsave(&uap->port.lock, flags);
+
+	status = readw(uap->port.membase + UART011_MIS);
+	if (status) {
+		do {
+			writew(status & ~(UART011_TXIS|UART011_RTIS|
+					  UART011_RXIS),
+			       uap->port.membase + UART011_ICR);
+
+			if (status & (UART011_RTIS|UART011_RXIS))
+				pl011_rx_chars(uap);
+			if (status & (UART011_DSRMIS|UART011_DCDMIS|
+				      UART011_CTSMIS|UART011_RIMIS))
+				pl011_modem_status(uap);
+			if (status & UART011_TXIS)
+				pl011_tx_chars(uap);
+
+			if (pass_counter-- == 0)
+				break;
+
+			status = readw(uap->port.membase + UART011_MIS);
+		} while (status != 0);
+		handled = 1;
+	}
+
+	spin_unlock_irqrestore(&uap->port.lock, flags);
+
+	return IRQ_RETVAL(handled);
+}
+
+static unsigned int pl01x_tx_empty(struct uart_port *port)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+	unsigned int status = readw(uap->port.membase + UART01x_FR);
+	return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
+}
+
+static unsigned int pl01x_get_mctrl(struct uart_port *port)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+	unsigned int result = 0;
+	unsigned int status = readw(uap->port.membase + UART01x_FR);
+
+#define TIOCMBIT(uartbit, tiocmbit)	\
+	if (status & uartbit)		\
+		result |= tiocmbit
+
+	TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR);
+	TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR);
+	TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS);
+	TIOCMBIT(UART011_FR_RI, TIOCM_RNG);
+#undef TIOCMBIT
+	return result;
+}
+
+static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+	unsigned int cr;
+
+	cr = readw(uap->port.membase + UART011_CR);
+
+#define	TIOCMBIT(tiocmbit, uartbit)		\
+	if (mctrl & tiocmbit)		\
+		cr |= uartbit;		\
+	else				\
+		cr &= ~uartbit
+
+	TIOCMBIT(TIOCM_RTS, UART011_CR_RTS);
+	TIOCMBIT(TIOCM_DTR, UART011_CR_DTR);
+	TIOCMBIT(TIOCM_OUT1, UART011_CR_OUT1);
+	TIOCMBIT(TIOCM_OUT2, UART011_CR_OUT2);
+	TIOCMBIT(TIOCM_LOOP, UART011_CR_LBE);
+
+	if (uap->autorts) {
+		/* We need to disable auto-RTS if we want to turn RTS off */
+		TIOCMBIT(TIOCM_RTS, UART011_CR_RTSEN);
+	}
+#undef TIOCMBIT
+
+	writew(cr, uap->port.membase + UART011_CR);
+}
+
+static void pl011_break_ctl(struct uart_port *port, int break_state)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+	unsigned long flags;
+	unsigned int lcr_h;
+
+	spin_lock_irqsave(&uap->port.lock, flags);
+	lcr_h = readw(uap->port.membase + uap->lcrh_tx);
+	if (break_state == -1)
+		lcr_h |= UART01x_LCRH_BRK;
+	else
+		lcr_h &= ~UART01x_LCRH_BRK;
+	writew(lcr_h, uap->port.membase + uap->lcrh_tx);
+	spin_unlock_irqrestore(&uap->port.lock, flags);
+}
+
+#ifdef CONFIG_CONSOLE_POLL
+static int pl010_get_poll_char(struct uart_port *port)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+	unsigned int status;
+
+	status = readw(uap->port.membase + UART01x_FR);
+	if (status & UART01x_FR_RXFE)
+		return NO_POLL_CHAR;
+
+	return readw(uap->port.membase + UART01x_DR);
+}
+
+static void pl010_put_poll_char(struct uart_port *port,
+			 unsigned char ch)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+
+	while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
+		barrier();
+
+	writew(ch, uap->port.membase + UART01x_DR);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
+static int pl011_startup(struct uart_port *port)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+	unsigned int cr;
+	int retval;
+
+	/*
+	 * Try to enable the clock producer.
+	 */
+	retval = clk_enable(uap->clk);
+	if (retval)
+		goto out;
+
+	uap->port.uartclk = clk_get_rate(uap->clk);
+
+	/*
+	 * Allocate the IRQ
+	 */
+	retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
+	if (retval)
+		goto clk_dis;
+
+	writew(uap->vendor->ifls, uap->port.membase + UART011_IFLS);
+
+	/*
+	 * Provoke TX FIFO interrupt into asserting.
+	 */
+	cr = UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_LBE;
+	writew(cr, uap->port.membase + UART011_CR);
+	writew(0, uap->port.membase + UART011_FBRD);
+	writew(1, uap->port.membase + UART011_IBRD);
+	writew(0, uap->port.membase + uap->lcrh_rx);
+	if (uap->lcrh_tx != uap->lcrh_rx) {
+		int i;
+		/*
+		 * Wait 10 PCLKs before writing LCRH_TX register,
+		 * to get this delay write read only register 10 times
+		 */
+		for (i = 0; i < 10; ++i)
+			writew(0xff, uap->port.membase + UART011_MIS);
+		writew(0, uap->port.membase + uap->lcrh_tx);
+	}
+	writew(0, uap->port.membase + UART01x_DR);
+	while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
+		barrier();
+
+	cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
+	writew(cr, uap->port.membase + UART011_CR);
+
+	/* Clear pending error interrupts */
+	writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS,
+	       uap->port.membase + UART011_ICR);
+
+	/*
+	 * initialise the old status of the modem signals
+	 */
+	uap->old_status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
+
+	/* Startup DMA */
+	pl011_dma_startup(uap);
+
+	/*
+	 * Finally, enable interrupts
+	 */
+	spin_lock_irq(&uap->port.lock);
+	uap->im = UART011_RXIM | UART011_RTIM;
+	writew(uap->im, uap->port.membase + UART011_IMSC);
+	spin_unlock_irq(&uap->port.lock);
+
+	return 0;
+
+ clk_dis:
+	clk_disable(uap->clk);
+ out:
+	return retval;
+}
+
+static void pl011_shutdown_channel(struct uart_amba_port *uap,
+					unsigned int lcrh)
+{
+      unsigned long val;
+
+      val = readw(uap->port.membase + lcrh);
+      val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
+      writew(val, uap->port.membase + lcrh);
+}
+
+static void pl011_shutdown(struct uart_port *port)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+
+	/*
+	 * disable all interrupts
+	 */
+	spin_lock_irq(&uap->port.lock);
+	uap->im = 0;
+	writew(uap->im, uap->port.membase + UART011_IMSC);
+	writew(0xffff, uap->port.membase + UART011_ICR);
+	spin_unlock_irq(&uap->port.lock);
+
+	pl011_dma_shutdown(uap);
+
+	/*
+	 * Free the interrupt
+	 */
+	free_irq(uap->port.irq, uap);
+
+	/*
+	 * disable the port
+	 */
+	uap->autorts = false;
+	writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR);
+
+	/*
+	 * disable break condition and fifos
+	 */
+	pl011_shutdown_channel(uap, uap->lcrh_rx);
+	if (uap->lcrh_rx != uap->lcrh_tx)
+		pl011_shutdown_channel(uap, uap->lcrh_tx);
+
+	/*
+	 * Shut down the clock producer
+	 */
+	clk_disable(uap->clk);
+}
+
+static void
+pl011_set_termios(struct uart_port *port, struct ktermios *termios,
+		     struct ktermios *old)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+	unsigned int lcr_h, old_cr;
+	unsigned long flags;
+	unsigned int baud, quot, clkdiv;
+
+	if (uap->vendor->oversampling)
+		clkdiv = 8;
+	else
+		clkdiv = 16;
+
+	/*
+	 * Ask the core to calculate the divisor for us.
+	 */
+	baud = uart_get_baud_rate(port, termios, old, 0,
+				  port->uartclk / clkdiv);
+
+	if (baud > port->uartclk/16)
+		quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud);
+	else
+		quot = DIV_ROUND_CLOSEST(port->uartclk * 4, baud);
+
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		lcr_h = UART01x_LCRH_WLEN_5;
+		break;
+	case CS6:
+		lcr_h = UART01x_LCRH_WLEN_6;
+		break;
+	case CS7:
+		lcr_h = UART01x_LCRH_WLEN_7;
+		break;
+	default: // CS8
+		lcr_h = UART01x_LCRH_WLEN_8;
+		break;
+	}
+	if (termios->c_cflag & CSTOPB)
+		lcr_h |= UART01x_LCRH_STP2;
+	if (termios->c_cflag & PARENB) {
+		lcr_h |= UART01x_LCRH_PEN;
+		if (!(termios->c_cflag & PARODD))
+			lcr_h |= UART01x_LCRH_EPS;
+	}
+	if (uap->fifosize > 1)
+		lcr_h |= UART01x_LCRH_FEN;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/*
+	 * Update the per-port timeout.
+	 */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	port->read_status_mask = UART011_DR_OE | 255;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= UART011_DR_FE | UART011_DR_PE;
+	if (termios->c_iflag & (BRKINT | PARMRK))
+		port->read_status_mask |= UART011_DR_BE;
+
+	/*
+	 * Characters to ignore
+	 */
+	port->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE;
+	if (termios->c_iflag & IGNBRK) {
+		port->ignore_status_mask |= UART011_DR_BE;
+		/*
+		 * If we're ignoring parity and break indicators,
+		 * ignore overruns too (for real raw support).
+		 */
+		if (termios->c_iflag & IGNPAR)
+			port->ignore_status_mask |= UART011_DR_OE;
+	}
+
+	/*
+	 * Ignore all characters if CREAD is not set.
+	 */
+	if ((termios->c_cflag & CREAD) == 0)
+		port->ignore_status_mask |= UART_DUMMY_DR_RX;
+
+	if (UART_ENABLE_MS(port, termios->c_cflag))
+		pl011_enable_ms(port);
+
+	/* first, disable everything */
+	old_cr = readw(port->membase + UART011_CR);
+	writew(0, port->membase + UART011_CR);
+
+	if (termios->c_cflag & CRTSCTS) {
+		if (old_cr & UART011_CR_RTS)
+			old_cr |= UART011_CR_RTSEN;
+
+		old_cr |= UART011_CR_CTSEN;
+		uap->autorts = true;
+	} else {
+		old_cr &= ~(UART011_CR_CTSEN | UART011_CR_RTSEN);
+		uap->autorts = false;
+	}
+
+	if (uap->vendor->oversampling) {
+		if (baud > port->uartclk / 16)
+			old_cr |= ST_UART011_CR_OVSFACT;
+		else
+			old_cr &= ~ST_UART011_CR_OVSFACT;
+	}
+
+	/* Set baud rate */
+	writew(quot & 0x3f, port->membase + UART011_FBRD);
+	writew(quot >> 6, port->membase + UART011_IBRD);
+
+	/*
+	 * ----------v----------v----------v----------v-----
+	 * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
+	 * ----------^----------^----------^----------^-----
+	 */
+	writew(lcr_h, port->membase + uap->lcrh_rx);
+	if (uap->lcrh_rx != uap->lcrh_tx) {
+		int i;
+		/*
+		 * Wait 10 PCLKs before writing LCRH_TX register,
+		 * to get this delay write read only register 10 times
+		 */
+		for (i = 0; i < 10; ++i)
+			writew(0xff, uap->port.membase + UART011_MIS);
+		writew(lcr_h, port->membase + uap->lcrh_tx);
+	}
+	writew(old_cr, port->membase + UART011_CR);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *pl011_type(struct uart_port *port)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+	return uap->port.type == PORT_AMBA ? uap->type : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'
+ */
+static void pl010_release_port(struct uart_port *port)
+{
+	release_mem_region(port->mapbase, SZ_4K);
+}
+
+/*
+ * Request the memory region(s) being used by 'port'
+ */
+static int pl010_request_port(struct uart_port *port)
+{
+	return request_mem_region(port->mapbase, SZ_4K, "uart-pl011")
+			!= NULL ? 0 : -EBUSY;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void pl010_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE) {
+		port->type = PORT_AMBA;
+		pl010_request_port(port);
+	}
+}
+
+/*
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	int ret = 0;
+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
+		ret = -EINVAL;
+	if (ser->irq < 0 || ser->irq >= nr_irqs)
+		ret = -EINVAL;
+	if (ser->baud_base < 9600)
+		ret = -EINVAL;
+	return ret;
+}
+
+static struct uart_ops amba_pl011_pops = {
+	.tx_empty	= pl01x_tx_empty,
+	.set_mctrl	= pl011_set_mctrl,
+	.get_mctrl	= pl01x_get_mctrl,
+	.stop_tx	= pl011_stop_tx,
+	.start_tx	= pl011_start_tx,
+	.stop_rx	= pl011_stop_rx,
+	.enable_ms	= pl011_enable_ms,
+	.break_ctl	= pl011_break_ctl,
+	.startup	= pl011_startup,
+	.shutdown	= pl011_shutdown,
+	.flush_buffer	= pl011_dma_flush_buffer,
+	.set_termios	= pl011_set_termios,
+	.type		= pl011_type,
+	.release_port	= pl010_release_port,
+	.request_port	= pl010_request_port,
+	.config_port	= pl010_config_port,
+	.verify_port	= pl010_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char = pl010_get_poll_char,
+	.poll_put_char = pl010_put_poll_char,
+#endif
+};
+
+static struct uart_amba_port *amba_ports[UART_NR];
+
+#ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE
+
+static void pl011_console_putchar(struct uart_port *port, int ch)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+
+	while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
+		barrier();
+	writew(ch, uap->port.membase + UART01x_DR);
+}
+
+static void
+pl011_console_write(struct console *co, const char *s, unsigned int count)
+{
+	struct uart_amba_port *uap = amba_ports[co->index];
+	unsigned int status, old_cr, new_cr;
+
+	clk_enable(uap->clk);
+
+	/*
+	 *	First save the CR then disable the interrupts
+	 */
+	old_cr = readw(uap->port.membase + UART011_CR);
+	new_cr = old_cr & ~UART011_CR_CTSEN;
+	new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
+	writew(new_cr, uap->port.membase + UART011_CR);
+
+	uart_console_write(&uap->port, s, count, pl011_console_putchar);
+
+	/*
+	 *	Finally, wait for transmitter to become empty
+	 *	and restore the TCR
+	 */
+	do {
+		status = readw(uap->port.membase + UART01x_FR);
+	} while (status & UART01x_FR_BUSY);
+	writew(old_cr, uap->port.membase + UART011_CR);
+
+	clk_disable(uap->clk);
+}
+
+static void __init
+pl011_console_get_options(struct uart_amba_port *uap, int *baud,
+			     int *parity, int *bits)
+{
+	if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) {
+		unsigned int lcr_h, ibrd, fbrd;
+
+		lcr_h = readw(uap->port.membase + uap->lcrh_tx);
+
+		*parity = 'n';
+		if (lcr_h & UART01x_LCRH_PEN) {
+			if (lcr_h & UART01x_LCRH_EPS)
+				*parity = 'e';
+			else
+				*parity = 'o';
+		}
+
+		if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7)
+			*bits = 7;
+		else
+			*bits = 8;
+
+		ibrd = readw(uap->port.membase + UART011_IBRD);
+		fbrd = readw(uap->port.membase + UART011_FBRD);
+
+		*baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
+
+		if (uap->vendor->oversampling) {
+			if (readw(uap->port.membase + UART011_CR)
+				  & ST_UART011_CR_OVSFACT)
+				*baud *= 2;
+		}
+	}
+}
+
+static int __init pl011_console_setup(struct console *co, char *options)
+{
+	struct uart_amba_port *uap;
+	int baud = 38400;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	/*
+	 * Check whether an invalid uart number has been specified, and
+	 * if so, search for the first available port that does have
+	 * console support.
+	 */
+	if (co->index >= UART_NR)
+		co->index = 0;
+	uap = amba_ports[co->index];
+	if (!uap)
+		return -ENODEV;
+
+	uap->port.uartclk = clk_get_rate(uap->clk);
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	else
+		pl011_console_get_options(uap, &baud, &parity, &bits);
+
+	return uart_set_options(&uap->port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver amba_reg;
+static struct console amba_console = {
+	.name		= "ttyAMA",
+	.write		= pl011_console_write,
+	.device		= uart_console_device,
+	.setup		= pl011_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+	.data		= &amba_reg,
+};
+
+#define AMBA_CONSOLE	(&amba_console)
+#else
+#define AMBA_CONSOLE	NULL
+#endif
+
+static struct uart_driver amba_reg = {
+	.owner			= THIS_MODULE,
+	.driver_name		= "ttyAMA",
+	.dev_name		= "ttyAMA",
+	.major			= SERIAL_AMBA_MAJOR,
+	.minor			= SERIAL_AMBA_MINOR,
+	.nr			= UART_NR,
+	.cons			= AMBA_CONSOLE,
+};
+
+static int pl011_probe(struct amba_device *dev, struct amba_id *id)
+{
+	struct uart_amba_port *uap;
+	struct vendor_data *vendor = id->data;
+	void __iomem *base;
+	int i, ret;
+
+	for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
+		if (amba_ports[i] == NULL)
+			break;
+
+	if (i == ARRAY_SIZE(amba_ports)) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	uap = kzalloc(sizeof(struct uart_amba_port), GFP_KERNEL);
+	if (uap == NULL) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	base = ioremap(dev->res.start, resource_size(&dev->res));
+	if (!base) {
+		ret = -ENOMEM;
+		goto free;
+	}
+
+	uap->clk = clk_get(&dev->dev, NULL);
+	if (IS_ERR(uap->clk)) {
+		ret = PTR_ERR(uap->clk);
+		goto unmap;
+	}
+
+	uap->vendor = vendor;
+	uap->lcrh_rx = vendor->lcrh_rx;
+	uap->lcrh_tx = vendor->lcrh_tx;
+	uap->fifosize = vendor->fifosize;
+	uap->port.dev = &dev->dev;
+	uap->port.mapbase = dev->res.start;
+	uap->port.membase = base;
+	uap->port.iotype = UPIO_MEM;
+	uap->port.irq = dev->irq[0];
+	uap->port.fifosize = uap->fifosize;
+	uap->port.ops = &amba_pl011_pops;
+	uap->port.flags = UPF_BOOT_AUTOCONF;
+	uap->port.line = i;
+	pl011_dma_probe(uap);
+
+	snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
+
+	amba_ports[i] = uap;
+
+	amba_set_drvdata(dev, uap);
+	ret = uart_add_one_port(&amba_reg, &uap->port);
+	if (ret) {
+		amba_set_drvdata(dev, NULL);
+		amba_ports[i] = NULL;
+		pl011_dma_remove(uap);
+		clk_put(uap->clk);
+ unmap:
+		iounmap(base);
+ free:
+		kfree(uap);
+	}
+ out:
+	return ret;
+}
+
+static int pl011_remove(struct amba_device *dev)
+{
+	struct uart_amba_port *uap = amba_get_drvdata(dev);
+	int i;
+
+	amba_set_drvdata(dev, NULL);
+
+	uart_remove_one_port(&amba_reg, &uap->port);
+
+	for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
+		if (amba_ports[i] == uap)
+			amba_ports[i] = NULL;
+
+	pl011_dma_remove(uap);
+	iounmap(uap->port.membase);
+	clk_put(uap->clk);
+	kfree(uap);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int pl011_suspend(struct amba_device *dev, pm_message_t state)
+{
+	struct uart_amba_port *uap = amba_get_drvdata(dev);
+
+	if (!uap)
+		return -EINVAL;
+
+	return uart_suspend_port(&amba_reg, &uap->port);
+}
+
+static int pl011_resume(struct amba_device *dev)
+{
+	struct uart_amba_port *uap = amba_get_drvdata(dev);
+
+	if (!uap)
+		return -EINVAL;
+
+	return uart_resume_port(&amba_reg, &uap->port);
+}
+#endif
+
+static struct amba_id pl011_ids[] = {
+	{
+		.id	= 0x00041011,
+		.mask	= 0x000fffff,
+		.data	= &vendor_arm,
+	},
+	{
+		.id	= 0x00380802,
+		.mask	= 0x00ffffff,
+		.data	= &vendor_st,
+	},
+	{ 0, 0 },
+};
+
+static struct amba_driver pl011_driver = {
+	.drv = {
+		.name	= "uart-pl011",
+	},
+	.id_table	= pl011_ids,
+	.probe		= pl011_probe,
+	.remove		= pl011_remove,
+#ifdef CONFIG_PM
+	.suspend	= pl011_suspend,
+	.resume		= pl011_resume,
+#endif
+};
+
+static int __init pl011_init(void)
+{
+	int ret;
+	printk(KERN_INFO "Serial: AMBA PL011 UART driver\n");
+
+	ret = uart_register_driver(&amba_reg);
+	if (ret == 0) {
+		ret = amba_driver_register(&pl011_driver);
+		if (ret)
+			uart_unregister_driver(&amba_reg);
+	}
+	return ret;
+}
+
+static void __exit pl011_exit(void)
+{
+	amba_driver_unregister(&pl011_driver);
+	uart_unregister_driver(&amba_reg);
+}
+
+/*
+ * While this can be a module, if builtin it's most likely the console
+ * So let's leave module_exit but move module_init to an earlier place
+ */
+arch_initcall(pl011_init);
+module_exit(pl011_exit);
+
+MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
+MODULE_DESCRIPTION("ARM AMBA serial port driver");
+MODULE_LICENSE("GPL");