Merge branch 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel into drm-core-next

Daniel prepared this branch with a back-merge as git was getting
very confused about changes in intel_display.c

1 files changed, 11 insertions, 10 deletions

diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c
index 248a2cc671a9..1fe51198a622 100644
--- a/drivers/spi/spi-bfin-sport.c
+++ b/drivers/spi/spi-bfin-sport.c
@@ -252,19 +252,15 @@ static void
 bfin_sport_spi_restore_state(struct bfin_sport_spi_master_data *drv_data)
 {
 	struct bfin_sport_spi_slave_data *chip = drv_data->cur_chip;
-	unsigned int bits = (drv_data->ops == &bfin_sport_transfer_ops_u8 ? 7 : 15);
 
 	bfin_sport_spi_disable(drv_data);
 	dev_dbg(drv_data->dev, "restoring spi ctl state\n");
 
 	bfin_write(&drv_data->regs->tcr1, chip->ctl_reg);
-	bfin_write(&drv_data->regs->tcr2, bits);
 	bfin_write(&drv_data->regs->tclkdiv, chip->baud);
-	bfin_write(&drv_data->regs->tfsdiv, bits);
 	SSYNC();
 
 	bfin_write(&drv_data->regs->rcr1, chip->ctl_reg & ~(ITCLK | ITFS));
-	bfin_write(&drv_data->regs->rcr2, bits);
 	SSYNC();
 
 	bfin_sport_spi_cs_active(chip);
@@ -420,11 +416,15 @@ bfin_sport_spi_pump_transfers(unsigned long data)
 	drv_data->cs_change = transfer->cs_change;
 
 	/* Bits per word setup */
-	bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word;
-	if (bits_per_word == 8)
-		drv_data->ops = &bfin_sport_transfer_ops_u8;
-	else
+	bits_per_word = transfer->bits_per_word ? :
+		message->spi->bits_per_word ? : 8;
+	if (bits_per_word % 16 == 0)
 		drv_data->ops = &bfin_sport_transfer_ops_u16;
+	else
+		drv_data->ops = &bfin_sport_transfer_ops_u8;
+	bfin_write(&drv_data->regs->tcr2, bits_per_word - 1);
+	bfin_write(&drv_data->regs->tfsdiv, bits_per_word - 1);
+	bfin_write(&drv_data->regs->rcr2, bits_per_word - 1);
 
 	drv_data->state = RUNNING_STATE;
 
@@ -598,11 +598,12 @@ bfin_sport_spi_setup(struct spi_device *spi)
 			}
 			chip->cs_chg_udelay = chip_info->cs_chg_udelay;
 			chip->idle_tx_val = chip_info->idle_tx_val;
-			spi->bits_per_word = chip_info->bits_per_word;
 		}
 	}
 
-	if (spi->bits_per_word != 8 && spi->bits_per_word != 16) {
+	if (spi->bits_per_word % 8) {
+		dev_err(&spi->dev, "%d bits_per_word is not supported\n",
+				spi->bits_per_word);
 		ret = -EINVAL;
 		goto error;
 	}