QE: Move QE from arch/powerpc to drivers/soc

ls1 has qe and ls1 has arm cpu.
move qe from arch/powerpc to drivers/soc/fsl
to adapt to powerpc and arm

Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

1 files changed, 192 insertions, 0 deletions

diff --git a/drivers/soc/fsl/qe/qe_io.c b/drivers/soc/fsl/qe/qe_io.c
new file mode 100644
index 000000000000..7ae59abc7863
--- /dev/null
+++ b/drivers/soc/fsl/qe/qe_io.c
@@ -0,0 +1,192 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/qe_io.c
+ *
+ * QE Parallel I/O ports configuration routines
+ *
+ * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <LeoLi@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+
+#include <asm/io.h>
+#include <soc/fsl/qe/qe.h>
+#include <asm/prom.h>
+#include <sysdev/fsl_soc.h>
+
+#undef DEBUG
+
+static struct qe_pio_regs __iomem *par_io;
+static int num_par_io_ports = 0;
+
+int par_io_init(struct device_node *np)
+{
+	struct resource res;
+	int ret;
+	const u32 *num_ports;
+
+	/* Map Parallel I/O ports registers */
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret)
+		return ret;
+	par_io = ioremap(res.start, resource_size(&res));
+
+	num_ports = of_get_property(np, "num-ports", NULL);
+	if (num_ports)
+		num_par_io_ports = *num_ports;
+
+	return 0;
+}
+
+void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir,
+			 int open_drain, int assignment, int has_irq)
+{
+	u32 pin_mask1bit;
+	u32 pin_mask2bits;
+	u32 new_mask2bits;
+	u32 tmp_val;
+
+	/* calculate pin location for single and 2 bits information */
+	pin_mask1bit = (u32) (1 << (QE_PIO_PINS - (pin + 1)));
+
+	/* Set open drain, if required */
+	tmp_val = in_be32(&par_io->cpodr);
+	if (open_drain)
+		out_be32(&par_io->cpodr, pin_mask1bit | tmp_val);
+	else
+		out_be32(&par_io->cpodr, ~pin_mask1bit & tmp_val);
+
+	/* define direction */
+	tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
+		in_be32(&par_io->cpdir2) :
+		in_be32(&par_io->cpdir1);
+
+	/* get all bits mask for 2 bit per port */
+	pin_mask2bits = (u32) (0x3 << (QE_PIO_PINS -
+				(pin % (QE_PIO_PINS / 2) + 1) * 2));
+
+	/* Get the final mask we need for the right definition */
+	new_mask2bits = (u32) (dir << (QE_PIO_PINS -
+				(pin % (QE_PIO_PINS / 2) + 1) * 2));
+
+	/* clear and set 2 bits mask */
+	if (pin > (QE_PIO_PINS / 2) - 1) {
+		out_be32(&par_io->cpdir2,
+			 ~pin_mask2bits & tmp_val);
+		tmp_val &= ~pin_mask2bits;
+		out_be32(&par_io->cpdir2, new_mask2bits | tmp_val);
+	} else {
+		out_be32(&par_io->cpdir1,
+			 ~pin_mask2bits & tmp_val);
+		tmp_val &= ~pin_mask2bits;
+		out_be32(&par_io->cpdir1, new_mask2bits | tmp_val);
+	}
+	/* define pin assignment */
+	tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
+		in_be32(&par_io->cppar2) :
+		in_be32(&par_io->cppar1);
+
+	new_mask2bits = (u32) (assignment << (QE_PIO_PINS -
+			(pin % (QE_PIO_PINS / 2) + 1) * 2));
+	/* clear and set 2 bits mask */
+	if (pin > (QE_PIO_PINS / 2) - 1) {
+		out_be32(&par_io->cppar2,
+			 ~pin_mask2bits & tmp_val);
+		tmp_val &= ~pin_mask2bits;
+		out_be32(&par_io->cppar2, new_mask2bits | tmp_val);
+	} else {
+		out_be32(&par_io->cppar1,
+			 ~pin_mask2bits & tmp_val);
+		tmp_val &= ~pin_mask2bits;
+		out_be32(&par_io->cppar1, new_mask2bits | tmp_val);
+	}
+}
+EXPORT_SYMBOL(__par_io_config_pin);
+
+int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+		      int assignment, int has_irq)
+{
+	if (!par_io || port >= num_par_io_ports)
+		return -EINVAL;
+
+	__par_io_config_pin(&par_io[port], pin, dir, open_drain, assignment,
+			    has_irq);
+	return 0;
+}
+EXPORT_SYMBOL(par_io_config_pin);
+
+int par_io_data_set(u8 port, u8 pin, u8 val)
+{
+	u32 pin_mask, tmp_val;
+
+	if (port >= num_par_io_ports)
+		return -EINVAL;
+	if (pin >= QE_PIO_PINS)
+		return -EINVAL;
+	/* calculate pin location */
+	pin_mask = (u32) (1 << (QE_PIO_PINS - 1 - pin));
+
+	tmp_val = in_be32(&par_io[port].cpdata);
+
+	if (val == 0)		/* clear */
+		out_be32(&par_io[port].cpdata, ~pin_mask & tmp_val);
+	else			/* set */
+		out_be32(&par_io[port].cpdata, pin_mask | tmp_val);
+
+	return 0;
+}
+EXPORT_SYMBOL(par_io_data_set);
+
+int par_io_of_config(struct device_node *np)
+{
+	struct device_node *pio;
+	const phandle *ph;
+	int pio_map_len;
+	const unsigned int *pio_map;
+
+	if (par_io == NULL) {
+		printk(KERN_ERR "par_io not initialized\n");
+		return -1;
+	}
+
+	ph = of_get_property(np, "pio-handle", NULL);
+	if (ph == NULL) {
+		printk(KERN_ERR "pio-handle not available\n");
+		return -1;
+	}
+
+	pio = of_find_node_by_phandle(*ph);
+
+	pio_map = of_get_property(pio, "pio-map", &pio_map_len);
+	if (pio_map == NULL) {
+		printk(KERN_ERR "pio-map is not set!\n");
+		return -1;
+	}
+	pio_map_len /= sizeof(unsigned int);
+	if ((pio_map_len % 6) != 0) {
+		printk(KERN_ERR "pio-map format wrong!\n");
+		return -1;
+	}
+
+	while (pio_map_len > 0) {
+		par_io_config_pin((u8) pio_map[0], (u8) pio_map[1],
+				(int) pio_map[2], (int) pio_map[3],
+				(int) pio_map[4], (int) pio_map[5]);
+		pio_map += 6;
+		pio_map_len -= 6;
+	}
+	of_node_put(pio);
+	return 0;
+}
+EXPORT_SYMBOL(par_io_of_config);