serial: sh-sci: Kill off all of the SCI/SCIF special casing.

This was added at a time when the compiler did a less than stellar job of
optimizing out dead code. These days this tends to be less of a concern,
so kill it all off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 15 insertions, 67 deletions

diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 511c10d42187..43c09a862213 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -16,7 +16,6 @@
 # define SCPCR  0xA4000116 /* 16 bit SCI and SCIF */
 # define SCPDR  0xA4000136 /* 8  bit SCI and SCIF */
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCI_AND_SCIF
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705)
 # define SCIF0		0xA4400000
 # define SCIF2		0xA4410000
@@ -30,17 +29,14 @@
  * SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output
  */
 # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721)
 # define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCIF_ONLY
 #define SCIF_ORER    0x0200   /* overrun error bit */
 #elif defined(CONFIG_SH_RTS7751R2D)
 # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
 # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7750)  || \
       defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
       defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
@@ -53,28 +49,24 @@
 # define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \
 	0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \
 	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ )
-# define SCI_AND_SCIF
 #elif defined(CONFIG_CPU_SUBTYPE_SH7760)
 # define SCSPTR0 0xfe600024 /* 16 bit SCIF */
 # define SCSPTR1 0xfe610024 /* 16 bit SCIF */
 # define SCSPTR2 0xfe620024 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)          0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
 # define SCSPTR0 0xA4400000	  /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
 # define PACR 0xa4050100
 # define PBCR 0xa4050102
 # define SCSCR_INIT(port)          0x3B
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7343)
 # define SCSPTR0 0xffe00010	/* 16 bit SCIF */
 # define SCSPTR1 0xffe10010	/* 16 bit SCIF */
 # define SCSPTR2 0xffe20010	/* 16 bit SCIF */
 # define SCSPTR3 0xffe30010	/* 16 bit SCIF */
 # define SCSCR_INIT(port) 0x32	/* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7722)
 # define PADR			0xA4050120
 # define PSDR			0xA405013e
@@ -82,7 +74,6 @@
 # define PSCR			0xA405011E
 # define SCIF_ORER		0x0001	/* overrun error bit */
 # define SCSCR_INIT(port)	0x0038	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7366)
 # define SCPDR0			0xA405013E      /* 16 bit SCIF0 PSDR */
 # define SCSPTR0		SCPDR0
@@ -97,12 +88,10 @@
 # define SCSPTR5                0xa4050128
 # define SCIF_ORER              0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)       0x0038  /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
 # define SCSPTR2 0xffe80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
 # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
 # define SCIF_BASE_ADDR    0x01030000
 # define SCIF_ADDR_SH5     PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR
@@ -111,14 +100,11 @@
 # define SCSPTR2           ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */
 # define SCLSR2            ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */
 # define SCSCR_INIT(port)  0x38		/* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_H83007) || defined(CONFIG_H83068)
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCI_ONLY
 # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
 #elif defined(CONFIG_H8S2678)
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCI_ONLY
 # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763)
 # define SCSPTR0 0xffe00024 /* 16 bit SCIF */
@@ -126,20 +112,17 @@
 # define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */
 # define SCIF_ORER 0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)	0x38	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7770)
 # define SCSPTR0 0xff923020 /* 16 bit SCIF */
 # define SCSPTR1 0xff924020 /* 16 bit SCIF */
 # define SCSPTR2 0xff925020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)	0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
 # define SCSPTR0	0xffe00024	/* 16 bit SCIF */
 # define SCSPTR1	0xffe10024	/* 16 bit SCIF */
 # define SCIF_ORER	0x0001		/* Overrun error bit */
 # define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7785)
 # define SCSPTR0	0xffea0024	/* 16 bit SCIF */
 # define SCSPTR1	0xffeb0024	/* 16 bit SCIF */
@@ -149,7 +132,6 @@
 # define SCSPTR5	0xffef0024	/* 16 bit SCIF */
 # define SCIF_OPER	0x0001		/* Overrun error bit */
 # define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \
       defined(CONFIG_CPU_SUBTYPE_SH7206) || \
       defined(CONFIG_CPU_SUBTYPE_SH7263)
@@ -158,14 +140,12 @@
 # define SCSPTR2 0xfffe9020 /* 16 bit SCIF */
 # define SCSPTR3 0xfffe9820 /* 16 bit SCIF */
 # define SCSCR_INIT(port)	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7619)
 # define SCSPTR0 0xf8400020 /* 16 bit SCIF */
 # define SCSPTR1 0xf8410020 /* 16 bit SCIF */
 # define SCSPTR2 0xf8420020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SHX3)
 # define SCSPTR0 0xffc30020		/* 16 bit SCIF */
 # define SCSPTR1 0xffc40020		/* 16 bit SCIF */
@@ -173,7 +153,6 @@
 # define SCSPTR3 0xffc60020		/* 16 bit SCIF */
 # define SCIF_ORER 0x0001		/* Overrun error bit */
 # define SCSCR_INIT(port)	0x38	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #else
 # error CPU subtype not defined
 #endif
@@ -244,55 +223,28 @@
 # define SCIF_TXROOM_MAX 16
 #endif
 
-#if defined(SCI_ONLY)
-# define SCxSR_TEND(port)		SCI_TEND
-# define SCxSR_ERRORS(port)		SCI_ERRORS
-# define SCxSR_RDxF(port)               SCI_RDRF
-# define SCxSR_TDxE(port)               SCI_TDRE
-# define SCxSR_ORER(port)		SCI_ORER
-# define SCxSR_FER(port)		SCI_FER
-# define SCxSR_PER(port)		SCI_PER
-# define SCxSR_BRK(port)		0x00
-# define SCxSR_RDxF_CLEAR(port)		0xbc
-# define SCxSR_ERROR_CLEAR(port)	0xc4
-# define SCxSR_TDxE_CLEAR(port)		0x78
-# define SCxSR_BREAK_CLEAR(port)	0xc4
-#elif defined(SCIF_ONLY)
-# define SCxSR_TEND(port)		SCIF_TEND
-# define SCxSR_ERRORS(port)		SCIF_ERRORS
-# define SCxSR_RDxF(port)               SCIF_RDF
-# define SCxSR_TDxE(port)               SCIF_TDFE
+#define SCxSR_TEND(port)	(((port)->type == PORT_SCI) ? SCI_TEND   : SCIF_TEND)
+#define SCxSR_ERRORS(port)	(((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS)
+#define SCxSR_RDxF(port)	(((port)->type == PORT_SCI) ? SCI_RDRF   : SCIF_RDF)
+#define SCxSR_TDxE(port)	(((port)->type == PORT_SCI) ? SCI_TDRE   : SCIF_TDFE)
+#define SCxSR_FER(port)		(((port)->type == PORT_SCI) ? SCI_FER    : SCIF_FER)
+#define SCxSR_PER(port)		(((port)->type == PORT_SCI) ? SCI_PER    : SCIF_PER)
+#define SCxSR_BRK(port)		(((port)->type == PORT_SCI) ? 0x00       : SCIF_BRK)
+
 #if defined(CONFIG_CPU_SUBTYPE_SH7705)
-# define SCxSR_ORER(port)		SCIF_ORER
+# define SCxSR_ORER(port)	(((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER)
 #else
-# define SCxSR_ORER(port)		0x0000
+# define SCxSR_ORER(port)	(((port)->type == PORT_SCI) ? SCI_ORER : 0x0000)
 #endif
-# define SCxSR_FER(port)		SCIF_FER
-# define SCxSR_PER(port)		SCIF_PER
-# define SCxSR_BRK(port)		SCIF_BRK
+
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721)
-# define SCxSR_RDxF_CLEAR(port)         (sci_in(port,SCxSR)&0xfffc)
-# define SCxSR_ERROR_CLEAR(port)        (sci_in(port,SCxSR)&0xfd73)
-# define SCxSR_TDxE_CLEAR(port)         (sci_in(port,SCxSR)&0xffdf)
-# define SCxSR_BREAK_CLEAR(port)        (sci_in(port,SCxSR)&0xffe3)
-#else
-/* SH7705 can also use this, clearing is same between 7705 and 7709 */
-# define SCxSR_RDxF_CLEAR(port)		0x00fc
-# define SCxSR_ERROR_CLEAR(port)	0x0073
-# define SCxSR_TDxE_CLEAR(port)		0x00df
-# define SCxSR_BREAK_CLEAR(port)	0x00e3
-#endif
+# define SCxSR_RDxF_CLEAR(port)	 (sci_in(port, SCxSR) & 0xfffc)
+# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
+# define SCxSR_TDxE_CLEAR(port)	 (sci_in(port, SCxSR) & 0xffdf)
+# define SCxSR_BREAK_CLEAR(port) (sci_in(port, SCxSR) & 0xffe3)
 #else
-# define SCxSR_TEND(port)	 (((port)->type == PORT_SCI) ? SCI_TEND   : SCIF_TEND)
-# define SCxSR_ERRORS(port)	 (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS)
-# define SCxSR_RDxF(port)        (((port)->type == PORT_SCI) ? SCI_RDRF   : SCIF_RDF)
-# define SCxSR_TDxE(port)        (((port)->type == PORT_SCI) ? SCI_TDRE   : SCIF_TDFE)
-# define SCxSR_ORER(port)        (((port)->type == PORT_SCI) ? SCI_ORER   : 0x0000)
-# define SCxSR_FER(port)         (((port)->type == PORT_SCI) ? SCI_FER    : SCIF_FER)
-# define SCxSR_PER(port)         (((port)->type == PORT_SCI) ? SCI_PER    : SCIF_PER)
-# define SCxSR_BRK(port)         (((port)->type == PORT_SCI) ? 0x00       : SCIF_BRK)
 # define SCxSR_RDxF_CLEAR(port)	 (((port)->type == PORT_SCI) ? 0xbc : 0x00fc)
 # define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073)
 # define SCxSR_TDxE_CLEAR(port)  (((port)->type == PORT_SCI) ? 0x78 : 0x00df)
@@ -578,14 +530,10 @@ static inline int sci_rxd_in(struct uart_port *port)
       defined(CONFIG_CPU_SUBTYPE_SH4_202)
 static inline int sci_rxd_in(struct uart_port *port)
 {
-#ifndef SCIF_ONLY
 	if (port->mapbase == 0xffe00000)
 		return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */
-#endif
-#ifndef SCI_ONLY
 	if (port->mapbase == 0xffe80000)
 		return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
-#endif
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7760)