summaryrefslogtreecommitdiffstats
path: root/drivers/serial/8250_pci.c
diff options
context:
space:
mode:
authorRussell King <rmk@dyn-67.arm.linux.org.uk>2005-07-27 11:35:54 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2005-07-27 11:35:54 +0100
commit241fc4367b3ca5d407b043599ed980304a70b91f (patch)
tree26fca6996c9b3fe89cf86864681adcffc62aac6c /drivers/serial/8250_pci.c
parent70db3d91a5228c98603c55fa06c87184a1f9f6db (diff)
downloadblackbird-op-linux-241fc4367b3ca5d407b043599ed980304a70b91f.tar.gz
blackbird-op-linux-241fc4367b3ca5d407b043599ed980304a70b91f.zip
[SERIAL] Expose 8250_pci setup/removal/suspend/resume functions
Re-jig the setup/removal/suspend/resume of 8250 pci ports so that they know slightly less about how they're attached to a PCI device. Expose this as the new interface for registering PCI serial ports, as well as the pciserial_board structure and associated flag definitions. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'drivers/serial/8250_pci.c')
-rw-r--r--drivers/serial/8250_pci.c233
1 files changed, 121 insertions, 112 deletions
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 7ca07651c10c..4e9084edfc7e 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -34,38 +34,6 @@
#undef SERIAL_DEBUG_PCI
/*
- * Definitions for PCI support.
- */
-#define FL_BASE_MASK 0x0007
-#define FL_BASE0 0x0000
-#define FL_BASE1 0x0001
-#define FL_BASE2 0x0002
-#define FL_BASE3 0x0003
-#define FL_BASE4 0x0004
-#define FL_GET_BASE(x) (x & FL_BASE_MASK)
-
-/* Use successive BARs (PCI base address registers),
- else use offset into some specified BAR */
-#define FL_BASE_BARS 0x0008
-
-/* do not assign an irq */
-#define FL_NOIRQ 0x0080
-
-/* Use the Base address register size to cap number of ports */
-#define FL_REGION_SZ_CAP 0x0100
-
-struct pciserial_board {
- unsigned int flags;
- unsigned int num_ports;
- unsigned int base_baud;
- unsigned int uart_offset;
- unsigned int reg_shift;
- unsigned int first_offset;
-};
-
-struct serial_private;
-
-/*
* init function returns:
* > 0 - number of ports
* = 0 - use board->num_ports
@@ -1528,60 +1496,14 @@ serial_pci_matches(struct pciserial_board *board,
board->first_offset == guessed->first_offset;
}
-/*
- * Probe one serial board. Unfortunately, there is no rhyme nor reason
- * to the arrangement of serial ports on a PCI card.
- */
-static int __devinit
-pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
+struct serial_private *
+pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board)
{
struct uart_port serial_port;
struct serial_private *priv;
- struct pciserial_board *board, tmp;
struct pci_serial_quirk *quirk;
int rc, nr_ports, i;
- if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
- printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
- ent->driver_data);
- return -EINVAL;
- }
-
- board = &pci_boards[ent->driver_data];
-
- rc = pci_enable_device(dev);
- if (rc)
- return rc;
-
- if (ent->driver_data == pbn_default) {
- /*
- * Use a copy of the pci_board entry for this;
- * avoid changing entries in the table.
- */
- memcpy(&tmp, board, sizeof(struct pciserial_board));
- board = &tmp;
-
- /*
- * We matched one of our class entries. Try to
- * determine the parameters of this board.
- */
- rc = serial_pci_guess_board(dev, board);
- if (rc)
- goto disable;
- } else {
- /*
- * We matched an explicit entry. If we are able to
- * detect this boards settings with our heuristic,
- * then we no longer need this entry.
- */
- memcpy(&tmp, &pci_boards[pbn_default],
- sizeof(struct pciserial_board));
- rc = serial_pci_guess_board(dev, &tmp);
- if (rc == 0 && serial_pci_matches(board, &tmp))
- moan_device("Redundant entry in serial pci_table.",
- dev);
- }
-
nr_ports = board->num_ports;
/*
@@ -1598,8 +1520,10 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
*/
if (quirk->init) {
rc = quirk->init(dev);
- if (rc < 0)
- goto disable;
+ if (rc < 0) {
+ priv = ERR_PTR(rc);
+ goto err_out;
+ }
if (rc)
nr_ports = rc;
}
@@ -1608,8 +1532,8 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
sizeof(unsigned int) * nr_ports,
GFP_KERNEL);
if (!priv) {
- rc = -ENOMEM;
- goto deinit;
+ priv = ERR_PTR(-ENOMEM);
+ goto err_deinit;
}
memset(priv, 0, sizeof(struct serial_private) +
@@ -1617,7 +1541,6 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
priv->dev = dev;
priv->quirk = quirk;
- pci_set_drvdata(dev, priv);
memset(&serial_port, 0, sizeof(struct uart_port));
serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
@@ -1643,24 +1566,21 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
priv->nr = i;
- return 0;
+ return priv;
- deinit:
+ err_deinit:
if (quirk->exit)
quirk->exit(dev);
- disable:
- pci_disable_device(dev);
- return rc;
+ err_out:
+ return priv;
}
+EXPORT_SYMBOL_GPL(pciserial_init_ports);
-static void __devexit pciserial_remove_one(struct pci_dev *dev)
+void pciserial_remove_ports(struct serial_private *priv)
{
- struct serial_private *priv = pci_get_drvdata(dev);
struct pci_serial_quirk *quirk;
int i;
- pci_set_drvdata(dev, NULL);
-
for (i = 0; i < priv->nr; i++)
serial8250_unregister_port(priv->line[i]);
@@ -1673,25 +1593,123 @@ static void __devexit pciserial_remove_one(struct pci_dev *dev)
/*
* Find the exit quirks.
*/
- quirk = find_quirk(dev);
+ quirk = find_quirk(priv->dev);
if (quirk->exit)
- quirk->exit(dev);
+ quirk->exit(priv->dev);
+
+ kfree(priv);
+}
+EXPORT_SYMBOL_GPL(pciserial_remove_ports);
+
+void pciserial_suspend_ports(struct serial_private *priv)
+{
+ int i;
+
+ for (i = 0; i < priv->nr; i++)
+ if (priv->line[i] >= 0)
+ serial8250_suspend_port(priv->line[i]);
+}
+EXPORT_SYMBOL_GPL(pciserial_suspend_ports);
+
+void pciserial_resume_ports(struct serial_private *priv)
+{
+ int i;
+
+ /*
+ * Ensure that the board is correctly configured.
+ */
+ if (priv->quirk->init)
+ priv->quirk->init(priv->dev);
+
+ for (i = 0; i < priv->nr; i++)
+ if (priv->line[i] >= 0)
+ serial8250_resume_port(priv->line[i]);
+}
+EXPORT_SYMBOL_GPL(pciserial_resume_ports);
+
+/*
+ * Probe one serial board. Unfortunately, there is no rhyme nor reason
+ * to the arrangement of serial ports on a PCI card.
+ */
+static int __devinit
+pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
+{
+ struct serial_private *priv;
+ struct pciserial_board *board, tmp;
+ int rc;
+
+ if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
+ printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
+ ent->driver_data);
+ return -EINVAL;
+ }
+
+ board = &pci_boards[ent->driver_data];
+
+ rc = pci_enable_device(dev);
+ if (rc)
+ return rc;
+
+ if (ent->driver_data == pbn_default) {
+ /*
+ * Use a copy of the pci_board entry for this;
+ * avoid changing entries in the table.
+ */
+ memcpy(&tmp, board, sizeof(struct pciserial_board));
+ board = &tmp;
+
+ /*
+ * We matched one of our class entries. Try to
+ * determine the parameters of this board.
+ */
+ rc = serial_pci_guess_board(dev, board);
+ if (rc)
+ goto disable;
+ } else {
+ /*
+ * We matched an explicit entry. If we are able to
+ * detect this boards settings with our heuristic,
+ * then we no longer need this entry.
+ */
+ memcpy(&tmp, &pci_boards[pbn_default],
+ sizeof(struct pciserial_board));
+ rc = serial_pci_guess_board(dev, &tmp);
+ if (rc == 0 && serial_pci_matches(board, &tmp))
+ moan_device("Redundant entry in serial pci_table.",
+ dev);
+ }
+
+ priv = pciserial_init_ports(dev, board);
+ if (!IS_ERR(priv)) {
+ pci_set_drvdata(dev, priv);
+ return 0;
+ }
+
+ rc = PTR_ERR(priv);
+ disable:
pci_disable_device(dev);
+ return rc;
+}
- kfree(priv);
+static void __devexit pciserial_remove_one(struct pci_dev *dev)
+{
+ struct serial_private *priv = pci_get_drvdata(dev);
+
+ pci_set_drvdata(dev, NULL);
+
+ pciserial_remove_ports(priv);
+
+ pci_disable_device(dev);
}
static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
{
struct serial_private *priv = pci_get_drvdata(dev);
- if (priv) {
- int i;
+ if (priv)
+ pciserial_suspend_ports(priv);
- for (i = 0; i < priv->nr; i++)
- serial8250_suspend_port(priv->line[i]);
- }
pci_save_state(dev);
pci_set_power_state(dev, pci_choose_state(dev, state));
return 0;
@@ -1705,21 +1723,12 @@ static int pciserial_resume_one(struct pci_dev *dev)
pci_restore_state(dev);
if (priv) {
- int i;
-
/*
* The device may have been disabled. Re-enable it.
*/
pci_enable_device(dev);
- /*
- * Ensure that the board is correctly configured.
- */
- if (priv->quirk->init)
- priv->quirk->init(dev);
-
- for (i = 0; i < priv->nr; i++)
- serial8250_resume_port(priv->line[i]);
+ pciserial_resume_ports(priv);
}
return 0;
}
OpenPOWER on IntegriCloud