[SCSI] qla2xxx: Handle MPI timeout indicated by AE8002

In case the MPI times out, the FW issues an async event AE8002
to indicate this to every FCoE function. The FC/FCoE driver is
required to handle this, by doing a soft reset and issuing a
Write MPI register mailbox command to reset the MPI.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

1 files changed, 61 insertions, 0 deletions

diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index d0413d56887c..52024080c393 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -3949,6 +3949,67 @@ qla2x00_write_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t data)
 }
 
 int
+qla81xx_write_mpi_register(scsi_qla_host_t *vha, uint16_t *mb)
+{
+	int rval;
+	uint32_t stat, timer;
+	uint16_t mb0 = 0;
+	struct qla_hw_data *ha = vha->hw;
+	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+
+	rval = QLA_SUCCESS;
+
+	DEBUG11(qla_printk(KERN_INFO, ha,
+	    "%s(%ld): entered.\n", __func__, vha->host_no));
+
+	clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
+
+	/* Write the MBC data to the registers */
+	WRT_REG_WORD(&reg->mailbox0, MBC_WRITE_MPI_REGISTER);
+	WRT_REG_WORD(&reg->mailbox1, mb[0]);
+	WRT_REG_WORD(&reg->mailbox2, mb[1]);
+	WRT_REG_WORD(&reg->mailbox3, mb[2]);
+	WRT_REG_WORD(&reg->mailbox4, mb[3]);
+
+	WRT_REG_DWORD(&reg->hccr, HCCRX_SET_HOST_INT);
+
+	/* Poll for MBC interrupt */
+	for (timer = 6000000; timer; timer--) {
+		/* Check for pending interrupts. */
+		stat = RD_REG_DWORD(&reg->host_status);
+		if (stat & HSRX_RISC_INT) {
+			stat &= 0xff;
+
+			if (stat == 0x1 || stat == 0x2 ||
+			    stat == 0x10 || stat == 0x11) {
+				set_bit(MBX_INTERRUPT,
+				    &ha->mbx_cmd_flags);
+				mb0 = RD_REG_WORD(&reg->mailbox0);
+				WRT_REG_DWORD(&reg->hccr,
+				    HCCRX_CLR_RISC_INT);
+				RD_REG_DWORD(&reg->hccr);
+				break;
+			}
+		}
+		udelay(5);
+	}
+
+	if (test_and_clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags))
+		rval = mb0 & MBS_MASK;
+	else
+		rval = QLA_FUNCTION_FAILED;
+
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk(KERN_INFO "%s(%ld): failed=%x mb[0]=%x.\n",
+		    __func__, vha->host_no, rval, mb[0]));
+	} else {
+		DEBUG11(printk(KERN_INFO
+		    "%s(%ld): done.\n", __func__, vha->host_no));
+	}
+
+	return rval;
+}
+int
 qla2x00_get_data_rate(scsi_qla_host_t *vha)
 {
 	int rval;