summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla2xxx/qla_init.c
diff options
context:
space:
mode:
authorGiridhar Malavali <giridhar.malavali@qlogic.com>2013-03-28 08:21:23 -0400
committerJames Bottomley <JBottomley@Parallels.com>2013-04-11 15:42:04 -0700
commit8ae6d9c7eb1004bc134813287010d57a863ba13b (patch)
tree01ab6534fa448a87bd25e567a9ae5cd9e330a145 /drivers/scsi/qla2xxx/qla_init.c
parent0ce2d5345a145015bc35f8251cf9d82a8f193a86 (diff)
downloadblackbird-op-linux-8ae6d9c7eb1004bc134813287010d57a863ba13b.tar.gz
blackbird-op-linux-8ae6d9c7eb1004bc134813287010d57a863ba13b.zip
[SCSI] qla2xxx: Enhancements to support ISPFx00.
[jejb: fix up checkpatch issues] Signed-off-by: Andrew Vazquez <andrew.vasquez@qlogic.com> Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_init.c')
-rw-r--r--drivers/scsi/qla2xxx/qla_init.c52
1 files changed, 39 insertions, 13 deletions
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index b59203393cb2..3565dfd8f370 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -25,7 +25,6 @@
*/
static int qla2x00_isp_firmware(scsi_qla_host_t *);
static int qla2x00_setup_chip(scsi_qla_host_t *);
-static int qla2x00_init_rings(scsi_qla_host_t *);
static int qla2x00_fw_ready(scsi_qla_host_t *);
static int qla2x00_configure_hba(scsi_qla_host_t *);
static int qla2x00_configure_loop(scsi_qla_host_t *);
@@ -83,7 +82,9 @@ qla2x00_get_async_timeout(struct scsi_qla_host *vha)
/* Firmware should use switch negotiated r_a_tov for timeout. */
tmo = ha->r_a_tov / 10 * 2;
- if (!IS_FWI2_CAPABLE(ha)) {
+ if (IS_QLAFX00(ha)) {
+ tmo = FX00_DEF_RATOV * 2;
+ } else if (!IS_FWI2_CAPABLE(ha)) {
/*
* Except for earlier ISPs where the timeout is seeded from the
* initialization control block.
@@ -1977,7 +1978,7 @@ qla24xx_config_rings(struct scsi_qla_host *vha)
*
* Returns 0 on success.
*/
-static int
+int
qla2x00_init_rings(scsi_qla_host_t *vha)
{
int rval;
@@ -2012,7 +2013,10 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
if (!rsp)
continue;
/* Initialize response queue entries */
- qla2x00_init_response_q_entries(rsp);
+ if (IS_QLAFX00(ha))
+ qlafx00_init_response_q_entries(rsp);
+ else
+ qla2x00_init_response_q_entries(rsp);
}
ha->tgt.atio_ring_ptr = ha->tgt.atio_ring;
@@ -2024,11 +2028,16 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ ql_dbg(ql_dbg_init, vha, 0x00d1, "Issue init firmware.\n");
+
+ if (IS_QLAFX00(ha)) {
+ rval = qlafx00_init_firmware(vha, ha->init_cb_size);
+ goto next_check;
+ }
+
/* Update any ISP specific firmware options before initialization. */
ha->isp_ops->update_fw_options(vha);
- ql_dbg(ql_dbg_init, vha, 0x00d1, "Issue init firmware.\n");
-
if (ha->flags.npiv_supported) {
if (ha->operating_mode == LOOP && !IS_CNA_CAPABLE(ha))
ha->max_npiv_vports = MIN_MULTI_ID_FABRIC - 1;
@@ -2042,6 +2051,7 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
}
rval = qla2x00_init_firmware(vha, ha->init_cb_size);
+next_check:
if (rval) {
ql_log(ql_log_fatal, vha, 0x00d2,
"Init Firmware **** FAILED ****.\n");
@@ -2069,6 +2079,9 @@ qla2x00_fw_ready(scsi_qla_host_t *vha)
uint16_t state[5];
struct qla_hw_data *ha = vha->hw;
+ if (IS_QLAFX00(vha->hw))
+ return qlafx00_fw_ready(vha);
+
rval = QLA_SUCCESS;
/* 20 seconds for loop down. */
@@ -3134,6 +3147,12 @@ void
qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
{
fcport->vha = vha;
+
+ if (IS_QLAFX00(vha->hw)) {
+ qla2x00_set_fcport_state(fcport, FCS_ONLINE);
+ qla2x00_reg_remote_port(vha, fcport);
+ return;
+ }
fcport->login_retry = 0;
fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT);
@@ -3894,15 +3913,24 @@ qla2x00_loop_resync(scsi_qla_host_t *vha)
/* Wait at most MAX_TARGET RSCNs for a stable link. */
wait_time = 256;
do {
- /* Issue a marker after FW becomes ready. */
- qla2x00_marker(vha, req, rsp, 0, 0,
- MK_SYNC_ALL);
- vha->marker_needed = 0;
+ if (!IS_QLAFX00(vha->hw)) {
+ /*
+ * Issue a marker after FW becomes
+ * ready.
+ */
+ qla2x00_marker(vha, req, rsp, 0, 0,
+ MK_SYNC_ALL);
+ vha->marker_needed = 0;
+ }
/* Remap devices on Loop. */
clear_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
- qla2x00_configure_loop(vha);
+ if (IS_QLAFX00(vha->hw))
+ qlafx00_configure_devices(vha);
+ else
+ qla2x00_configure_loop(vha);
+
wait_time--;
} while (!atomic_read(&vha->loop_down_timer) &&
!(test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
@@ -3968,9 +3996,7 @@ qla2x00_update_fcports(scsi_qla_host_t *base_vha)
if (fcport->drport &&
atomic_read(&fcport->state) != FCS_UNCONFIGURED) {
spin_unlock_irqrestore(&ha->vport_slock, flags);
-
qla2x00_rport_del(fcport);
-
spin_lock_irqsave(&ha->vport_slock, flags);
}
}
OpenPOWER on IntegriCloud