[SCSI] psi240i: remove driver

The psi240i driver is still written for cmnd->request_buffer
as a char pointer to actual data. There was never any attempt
to use the scatterlist option.

  - remove all source files (3) from drivers/scsi
  - Remove from Makefile and Kconfig

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

1 files changed, 0 insertions, 195 deletions

diff --git a/drivers/scsi/psi_chip.h b/drivers/scsi/psi_chip.h
deleted file mode 100644
index 224cf8f64c97..000000000000
--- a/drivers/scsi/psi_chip.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/*+M*************************************************************************
- * Perceptive Solutions, Inc. PSI-240I device driver proc support for Linux.
- *
- * Copyright (c) 1997 Perceptive Solutions, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.  If not, write to
- * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- *	File Name:	psi_chip.h
- *
- *	Description:	This file contains the interface defines and
- *					error codes.
- *
- *-M*************************************************************************/
-#ifndef PSI_CHIP
-#define PSI_CHIP
-
-/************************************************/
-/*		Misc konstants							*/
-/************************************************/
-#define	CHIP_MAXDRIVES			8
-
-/************************************************/
-/*		Chip I/O addresses						*/
-/************************************************/
-#define	CHIP_ADRS_0				0x0130
-#define	CHIP_ADRS_1				0x0150
-#define	CHIP_ADRS_2				0x0190
-#define	CHIP_ADRS_3				0x0210
-#define	CHIP_ADRS_4				0x0230
-#define	CHIP_ADRS_5				0x0250
-
-/************************************************/
-/*		EEPROM locations		*/
-/************************************************/
-#define	CHIP_EEPROM_BIOS		0x0000		// BIOS base address
-#define	CHIP_EEPROM_DATA		0x2000	   	// SETUP data base address
-#define	CHIP_EEPROM_FACTORY		0x2400	   	// FACTORY data base address
-#define	CHIP_EEPROM_SETUP		0x3000	   	// SETUP PROGRAM base address
-
-#define	CHIP_EEPROM_SIZE		32768U	   	// size of the entire EEPROM
-#define	CHIP_EEPROM_BIOS_SIZE	8192	   	// size of the BIOS in bytes
-#define	CHIP_EEPROM_DATA_SIZE	4096	   	// size of factory, setup, log data block in bytes
-#define	CHIP_EEPROM_SETUP_SIZE	20480U	   	// size of the setup program in bytes
-
-/************************************************/
-/*		Chip Interrupts							*/
-/************************************************/
-#define	CHIP_IRQ_10				0x72
-#define	CHIP_IRQ_11				0x73
-#define	CHIP_IRQ_12				0x74
-
-/************************************************/
-/*		Chip Setup addresses		*/
-/************************************************/
-#define	CHIP_SETUP_BASE			0x0000C000L
-
-/************************************************/
-/*		Chip Register address offsets	*/
-/************************************************/
-#define	REG_DATA				0x00
-#define	REG_ERROR				0x01
-#define	REG_SECTOR_COUNT		0x02
-#define	REG_LBA_0				0x03
-#define	REG_LBA_8				0x04
-#define	REG_LBA_16				0x05
-#define	REG_LBA_24				0x06
-#define	REG_STAT_CMD			0x07
-#define	REG_SEL_FAIL			0x08
-#define	REG_IRQ_STATUS			0x09
-#define	REG_ADDRESS				0x0A
-#define	REG_FAIL				0x0C
-#define	REG_ALT_STAT		   	0x0E
-#define	REG_DRIVE_ADRS			0x0F
-
-/************************************************/
-/*		Chip RAM locations		*/
-/************************************************/
-#define	CHIP_DEVICE				0x8000
-#define	CHIP_DEVICE_0			0x8000
-#define CHIP_DEVICE_1			0x8008
-#define	CHIP_DEVICE_2			0x8010
-#define	CHIP_DEVICE_3			0x8018
-#define	CHIP_DEVICE_4			0x8020
-#define	CHIP_DEVICE_5			0x8028
-#define	CHIP_DEVICE_6			0x8030
-#define	CHIP_DEVICE_7			0x8038
-typedef struct
-	{
-	UCHAR	channel;		// channel of this device (0-8).
-	UCHAR	spt;			// Sectors Per Track.
-	ULONG	spc;			// Sectors Per Cylinder.
-	}	CHIP_DEVICE_N;
-
-#define	CHIP_CONFIG				0x8100		// address of boards configuration.
-typedef struct
-	{
-	UCHAR		irq;			// interrupt request channel number
-	UCHAR		numDrives;		// Number of accessible drives
-	UCHAR		fastFormat;	 	// Boolean for fast format enable
-	}	CHIP_CONFIG_N;
-
-#define	CHIP_MAP				0x8108 		// eight byte device type map.
-
-
-#define	CHIP_RAID				0x8120 		// array of RAID signature structures and LBA
-#define	CHIP_RAID_1				0x8120
-#define CHIP_RAID_2				0x8130
-#define	CHIP_RAID_3				0x8140
-#define	CHIP_RAID_4				0x8150
-
-/************************************************/
-/*		Chip Register Masks		*/
-/************************************************/
-#define	CHIP_ID					0x7B
-#define	SEL_RAM					0x8000
-#define	MASK_FAIL				0x80
-
-/************************************************/
-/*		Chip cable select bits		*/
-/************************************************/
-#define	SECTORSXFER				8
-
-/************************************************/
-/*		Chip cable select bits		*/
-/************************************************/
-#define	SEL_NONE				0x00
-#define	SEL_1					0x01
-#define	SEL_2					0x02
-#define	SEL_3					0x04
-#define	SEL_4					0x08
-
-/************************************************/
-/*		Programmable Interrupt Controller*/
-/************************************************/
-#define	PIC1					0x20		// first 8259 base port address
-#define	PIC2					0xA0		// second 8259 base port address
-#define	INT_OCW1				1			// Operation Control Word 1: IRQ mask
-#define	EOI						0x20		// non-specific end-of-interrupt
-
-/************************************************/
-/*		Device/Geometry controls				*/
-/************************************************/
-#define GEOMETRY_NONE		 	0x0			// No device
-#define GEOMETRY_AUTO			0x1			// Geometry set automatically
-#define GEOMETRY_USER		 	0x2			// User supplied geometry
-
-#define	DEVICE_NONE				0x0			// No device present
-#define	DEVICE_INACTIVE			0x1			// device present but not registered active
-#define	DEVICE_ATAPI			0x2			// ATAPI device (CD_ROM, Tape, Etc...)
-#define	DEVICE_DASD_NONLBA		0x3			// Non LBA incompatible device
-#define	DEVICE_DASD_LBA			0x4			// LBA compatible device
-
-/************************************************/
-/*		Setup Structure Definitions	*/
-/************************************************/
-typedef struct							// device setup parameters
-	{
-	UCHAR			geometryControl;	// geometry control flags
-	UCHAR		   	device;				// device code
-	USHORT			sectors;			// number of sectors per track
-	USHORT			heads;				// number of heads
-	USHORT			cylinders;			// number of cylinders for this device
-	ULONG			blocks;				// number of blocks on device
-	USHORT			spare1;
-	USHORT			spare2;
-	} SETUP_DEVICE, *PSETUP_DEVICE;
-
-typedef struct		// master setup structure
-	{
-	USHORT 			startupDelay;
-	USHORT 			promptBIOS;
-	USHORT 			fastFormat;
-	USHORT			spare2;
-	USHORT			spare3;
-	USHORT			spare4;
-	USHORT			spare5;
-	USHORT			spare6;
-	SETUP_DEVICE	setupDevice[8];
-	}	SETUP, *PSETUP;
-
-#endif
-