diff options
| author | Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com> | 2013-10-30 16:23:47 +0530 |
|---|---|---|
| committer | James Bottomley <JBottomley@Parallels.com> | 2013-12-02 10:35:52 -0800 |
| commit | 7d029005484a6125a91a075518b9cfde830bc709 (patch) | |
| tree | 17fc58a081ffcd246b5f4cf968b0146250a181d7 /drivers/scsi/pm8001 | |
| parent | 34a9b81b476ea0fa7a2e7ec642830f690eb093aa (diff) | |
| download | blackbird-op-linux-7d029005484a6125a91a075518b9cfde830bc709.tar.gz blackbird-op-linux-7d029005484a6125a91a075518b9cfde830bc709.zip | |
[SCSI] pm80xx: Resetting the phy state.
Setting the phy state for hard reset response.
After sending hard reset for a device ,phy down event sets
the phy state to zero but for phy up event it will not set
the phy state again.This will cause problem to successive
hard resets.
Signed-off-by: Nikith.Ganigarakoppal@pmcs.com
Signed-off-by: Anandkumar.Santhanam@pmcs.com
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers/scsi/pm8001')
| -rw-r--r-- | drivers/scsi/pm8001/pm8001_hwi.c | 2 | ||||
| -rw-r--r-- | drivers/scsi/pm8001/pm8001_hwi.h | 4 | ||||
| -rw-r--r-- | drivers/scsi/pm8001/pm80xx_hwi.c | 2 | ||||
| -rw-r--r-- | drivers/scsi/pm8001/pm80xx_hwi.h | 2 |
4 files changed, 10 insertions, 0 deletions
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index f16ece91b94a..0a1296a87d66 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -3403,6 +3403,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) unsigned long flags; u8 deviceType = pPayload->sas_identify.dev_type; port->port_state = portstate; + phy->phy_state = PHY_STATE_LINK_UP_SPC; PM8001_MSG_DBG(pm8001_ha, pm8001_printk("HW_EVENT_SAS_PHY_UP port id = %d, phy id = %d\n", port_id, phy_id)); @@ -3483,6 +3484,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) pm8001_printk("HW_EVENT_SATA_PHY_UP port id = %d," " phy id = %d\n", port_id, phy_id)); port->port_state = portstate; + phy->phy_state = PHY_STATE_LINK_UP_SPC; port->port_attached = 1; pm8001_get_lrate_mode(phy, link_rate); phy->phy_type |= PORT_TYPE_SATA; diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h index 6d91e2446542..e4867e690c84 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.h +++ b/drivers/scsi/pm8001/pm8001_hwi.h @@ -131,6 +131,10 @@ #define LINKRATE_30 (0x02 << 8) #define LINKRATE_60 (0x04 << 8) +/* for phy state */ + +#define PHY_STATE_LINK_UP_SPC 0x1 + /* for new SPC controllers MEMBASE III is shared between BIOS and DATA */ #define GSM_SM_BASE 0x4F0000 struct mpi_msg_hdr{ diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 8987b1706216..c950dc5c9943 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -2894,6 +2894,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) unsigned long flags; u8 deviceType = pPayload->sas_identify.dev_type; port->port_state = portstate; + phy->phy_state = PHY_STATE_LINK_UP_SPCV; PM8001_MSG_DBG(pm8001_ha, pm8001_printk( "portid:%d; phyid:%d; linkrate:%d; " "portstate:%x; devicetype:%x\n", @@ -2978,6 +2979,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) port_id, phy_id, link_rate, portstate)); port->port_state = portstate; + phy->phy_state = PHY_STATE_LINK_UP_SPCV; port->port_attached = 1; pm8001_get_lrate_mode(phy, link_rate); phy->phy_type |= PORT_TYPE_SATA; diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h index c86816bea424..9970a385795d 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.h +++ b/drivers/scsi/pm8001/pm80xx_hwi.h @@ -215,6 +215,8 @@ #define SAS_DOPNRJT_RTRY_TMO 128 #define SAS_COPNRJT_RTRY_TMO 128 +/* for phy state */ +#define PHY_STATE_LINK_UP_SPCV 0x2 /* Making ORR bigger than IT NEXUS LOSS which is 2000000us = 2 second. Assuming a bigger value 3 second, 3000000/128 = 23437.5 where 128 |
