summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc
diff options
context:
space:
mode:
authorJames Smart <james.smart@emulex.com>2011-10-10 21:32:43 -0400
committerJames Bottomley <JBottomley@Parallels.com>2011-10-16 11:31:19 -0500
commita183a15f88a6803476abf4c7f097df33f6ca6f92 (patch)
tree98f4c78eec6d24b9032e1cf099ccda0c9e190212 /drivers/scsi/lpfc
parent73d91e503a60bd164b636258ae9f558b72010602 (diff)
downloadblackbird-op-linux-a183a15f88a6803476abf4c7f097df33f6ca6f92.tar.gz
blackbird-op-linux-a183a15f88a6803476abf4c7f097df33f6ca6f92.zip
[SCSI] lpfc 8.3.27: Changed worst case mailbox timeout
Changed the timeout value for flash-based SLI_CONFIG (0x9B) mailbox command to 300 seconds for worst case flash delays. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers/scsi/lpfc')
-rw-r--r--drivers/scsi/lpfc/lpfc_attr.c12
-rw-r--r--drivers/scsi/lpfc/lpfc_crtn.h2
-rw-r--r--drivers/scsi/lpfc/lpfc_hw4.h48
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c31
-rw-r--r--drivers/scsi/lpfc/lpfc_mbox.c80
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c170
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.h18
-rw-r--r--drivers/scsi/lpfc/lpfc_sli4.h4
8 files changed, 229 insertions, 136 deletions
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 72cb750860d6..4b0333ee2d94 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -4113,8 +4113,10 @@ sysfs_mbox_read(struct file *filp, struct kobject *kobj,
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
- int rc;
+ LPFC_MBOXQ_t *mboxq;
MAILBOX_t *pmb;
+ uint32_t mbox_tmo;
+ int rc;
if (off > MAILBOX_CMD_SIZE)
return -ERANGE;
@@ -4139,7 +4141,8 @@ sysfs_mbox_read(struct file *filp, struct kobject *kobj,
if (off == 0 &&
phba->sysfs_mbox.state == SMBOX_WRITING &&
phba->sysfs_mbox.offset >= 2 * sizeof(uint32_t)) {
- pmb = &phba->sysfs_mbox.mbox->u.mb;
+ mboxq = (LPFC_MBOXQ_t *)&phba->sysfs_mbox.mbox;
+ pmb = &mboxq->u.mb;
switch (pmb->mbxCommand) {
/* Offline only */
case MBX_INIT_LINK:
@@ -4249,9 +4252,8 @@ sysfs_mbox_read(struct file *filp, struct kobject *kobj,
} else {
spin_unlock_irq(&phba->hbalock);
- rc = lpfc_sli_issue_mbox_wait (phba,
- phba->sysfs_mbox.mbox,
- lpfc_mbox_tmo_val(phba, pmb->mbxCommand) * HZ);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq);
+ rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
spin_lock_irq(&phba->hbalock);
}
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index a6db6aef1331..9067831d9223 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -209,7 +209,7 @@ void __lpfc_mbox_cmpl_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbox_cmpl_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
int lpfc_mbox_cmd_check(struct lpfc_hba *, LPFC_MBOXQ_t *);
int lpfc_mbox_dev_check(struct lpfc_hba *);
-int lpfc_mbox_tmo_val(struct lpfc_hba *, int);
+int lpfc_mbox_tmo_val(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_init_vfi(struct lpfcMboxq *, struct lpfc_vport *);
void lpfc_reg_vfi(struct lpfcMboxq *, struct lpfc_vport *, dma_addr_t);
void lpfc_init_vpi(struct lpfc_hba *, struct lpfcMboxq *, uint16_t);
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 7db794aa118c..ca7d137cd45f 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -826,6 +826,7 @@ struct mbox_header {
#define LPFC_EXTENT_VERSION_DEFAULT 0
/* Subsystem Definitions */
+#define LPFC_MBOX_SUBSYSTEM_NA 0x0
#define LPFC_MBOX_SUBSYSTEM_COMMON 0x1
#define LPFC_MBOX_SUBSYSTEM_FCOE 0xC
@@ -836,25 +837,33 @@ struct mbox_header {
#define HOST_ENDIAN_HIGH_WORD1 0xFF7856FF
/* Common Opcodes */
-#define LPFC_MBOX_OPCODE_CQ_CREATE 0x0C
-#define LPFC_MBOX_OPCODE_EQ_CREATE 0x0D
-#define LPFC_MBOX_OPCODE_MQ_CREATE 0x15
-#define LPFC_MBOX_OPCODE_GET_CNTL_ATTRIBUTES 0x20
-#define LPFC_MBOX_OPCODE_NOP 0x21
-#define LPFC_MBOX_OPCODE_MQ_DESTROY 0x35
-#define LPFC_MBOX_OPCODE_CQ_DESTROY 0x36
-#define LPFC_MBOX_OPCODE_EQ_DESTROY 0x37
-#define LPFC_MBOX_OPCODE_QUERY_FW_CFG 0x3A
-#define LPFC_MBOX_OPCODE_FUNCTION_RESET 0x3D
-#define LPFC_MBOX_OPCODE_MQ_CREATE_EXT 0x5A
-#define LPFC_MBOX_OPCODE_GET_RSRC_EXTENT_INFO 0x9A
-#define LPFC_MBOX_OPCODE_GET_ALLOC_RSRC_EXTENT 0x9B
-#define LPFC_MBOX_OPCODE_ALLOC_RSRC_EXTENT 0x9C
-#define LPFC_MBOX_OPCODE_DEALLOC_RSRC_EXTENT 0x9D
-#define LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG 0xA0
-#define LPFC_MBOX_OPCODE_GET_PROFILE_CONFIG 0xA4
-#define LPFC_MBOX_OPCODE_WRITE_OBJECT 0xAC
-#define LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS 0xB5
+#define LPFC_MBOX_OPCODE_NA 0x00
+#define LPFC_MBOX_OPCODE_CQ_CREATE 0x0C
+#define LPFC_MBOX_OPCODE_EQ_CREATE 0x0D
+#define LPFC_MBOX_OPCODE_MQ_CREATE 0x15
+#define LPFC_MBOX_OPCODE_GET_CNTL_ATTRIBUTES 0x20
+#define LPFC_MBOX_OPCODE_NOP 0x21
+#define LPFC_MBOX_OPCODE_MQ_DESTROY 0x35
+#define LPFC_MBOX_OPCODE_CQ_DESTROY 0x36
+#define LPFC_MBOX_OPCODE_EQ_DESTROY 0x37
+#define LPFC_MBOX_OPCODE_QUERY_FW_CFG 0x3A
+#define LPFC_MBOX_OPCODE_FUNCTION_RESET 0x3D
+#define LPFC_MBOX_OPCODE_MQ_CREATE_EXT 0x5A
+#define LPFC_MBOX_OPCODE_GET_RSRC_EXTENT_INFO 0x9A
+#define LPFC_MBOX_OPCODE_GET_ALLOC_RSRC_EXTENT 0x9B
+#define LPFC_MBOX_OPCODE_ALLOC_RSRC_EXTENT 0x9C
+#define LPFC_MBOX_OPCODE_DEALLOC_RSRC_EXTENT 0x9D
+#define LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG 0xA0
+#define LPFC_MBOX_OPCODE_GET_PROFILE_CONFIG 0xA4
+#define LPFC_MBOX_OPCODE_SET_PROFILE_CONFIG 0xA5
+#define LPFC_MBOX_OPCODE_GET_PROFILE_LIST 0xA6
+#define LPFC_MBOX_OPCODE_SET_ACT_PROFILE 0xA8
+#define LPFC_MBOX_OPCODE_GET_FACTORY_PROFILE_CONFIG 0xA9
+#define LPFC_MBOX_OPCODE_READ_OBJECT 0xAB
+#define LPFC_MBOX_OPCODE_WRITE_OBJECT 0xAC
+#define LPFC_MBOX_OPCODE_READ_OBJECT_LIST 0xAD
+#define LPFC_MBOX_OPCODE_DELETE_OBJECT 0xAE
+#define LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS 0xB5
/* FCoE Opcodes */
#define LPFC_MBOX_OPCODE_FCOE_WQ_CREATE 0x01
@@ -868,6 +877,7 @@ struct mbox_header {
#define LPFC_MBOX_OPCODE_FCOE_DELETE_FCF 0x0A
#define LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE 0x0B
#define LPFC_MBOX_OPCODE_FCOE_REDISCOVER_FCF 0x10
+#define LPFC_MBOX_OPCODE_FCOE_SET_FCLINK_SETTINGS 0x21
#define LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_STATE 0x22
#define LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_LOOPBACK 0x23
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index bdb8f2da27cc..3bdec4b2faae 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -2441,17 +2441,19 @@ lpfc_block_mgmt_io(struct lpfc_hba * phba)
uint8_t actcmd = MBX_HEARTBEAT;
unsigned long timeout;
-
+ timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies;
spin_lock_irqsave(&phba->hbalock, iflag);
phba->sli.sli_flag |= LPFC_BLOCK_MGMT_IO;
- if (phba->sli.mbox_active)
+ if (phba->sli.mbox_active) {
actcmd = phba->sli.mbox_active->u.mb.mbxCommand;
+ /* Determine how long we might wait for the active mailbox
+ * command to be gracefully completed by firmware.
+ */
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
+ phba->sli.mbox_active) * 1000) + jiffies;
+ }
spin_unlock_irqrestore(&phba->hbalock, iflag);
- /* Determine how long we might wait for the active mailbox
- * command to be gracefully completed by firmware.
- */
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, actcmd) * 1000) +
- jiffies;
+
/* Wait for the outstnading mailbox command to complete */
while (phba->sli.mbox_active) {
/* Check active mailbox complete status every 2ms */
@@ -7158,12 +7160,13 @@ lpfc_sli4_send_nop_mbox_cmds(struct lpfc_hba *phba, uint32_t cnt)
lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
LPFC_MBOX_OPCODE_NOP, length, LPFC_SLI4_MBX_EMBED);
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
for (cmdsent = 0; cmdsent < cnt; cmdsent++) {
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
- else
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq);
rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+ }
if (rc == MBX_TIMEOUT)
break;
/* Check return status */
@@ -8129,7 +8132,7 @@ lpfc_pc_sli4_params_get(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_PORT_CAPABILITIES);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq);
rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
}
@@ -8191,6 +8194,7 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
int rc;
struct lpfc_mqe *mqe = &mboxq->u.mqe;
struct lpfc_pc_sli4_params *sli4_params;
+ uint32_t mbox_tmo;
int length;
struct lpfc_sli4_parameters *mbx_sli4_parameters;
@@ -8209,9 +8213,10 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
length, LPFC_SLI4_MBX_EMBED);
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
- else
- rc = lpfc_sli_issue_mbox_wait(phba, mboxq,
- lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG));
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq);
+ rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+ }
if (unlikely(rc))
return rc;
sli4_params = &phba->sli4_hba.pc_sli4_params;
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 83450cc5c4d3..2ebc7d2540c0 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1598,9 +1598,12 @@ lpfc_mbox_dev_check(struct lpfc_hba *phba)
* Timeout value to be used for the given mailbox command
**/
int
-lpfc_mbox_tmo_val(struct lpfc_hba *phba, int cmd)
+lpfc_mbox_tmo_val(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
{
- switch (cmd) {
+ MAILBOX_t *mbox = &mboxq->u.mb;
+ uint8_t subsys, opcode;
+
+ switch (mbox->mbxCommand) {
case MBX_WRITE_NV: /* 0x03 */
case MBX_UPDATE_CFG: /* 0x1B */
case MBX_DOWN_LOAD: /* 0x1C */
@@ -1610,6 +1613,28 @@ lpfc_mbox_tmo_val(struct lpfc_hba *phba, int cmd)
case MBX_LOAD_EXP_ROM: /* 0x9C */
return LPFC_MBOX_TMO_FLASH_CMD;
case MBX_SLI4_CONFIG: /* 0x9b */
+ subsys = lpfc_sli_config_mbox_subsys_get(phba, mboxq);
+ opcode = lpfc_sli_config_mbox_opcode_get(phba, mboxq);
+ if (subsys == LPFC_MBOX_SUBSYSTEM_COMMON) {
+ switch (opcode) {
+ case LPFC_MBOX_OPCODE_READ_OBJECT:
+ case LPFC_MBOX_OPCODE_WRITE_OBJECT:
+ case LPFC_MBOX_OPCODE_READ_OBJECT_LIST:
+ case LPFC_MBOX_OPCODE_DELETE_OBJECT:
+ case LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG:
+ case LPFC_MBOX_OPCODE_GET_PROFILE_LIST:
+ case LPFC_MBOX_OPCODE_SET_ACT_PROFILE:
+ case LPFC_MBOX_OPCODE_SET_PROFILE_CONFIG:
+ case LPFC_MBOX_OPCODE_GET_FACTORY_PROFILE_CONFIG:
+ return LPFC_MBOX_SLI4_CONFIG_EXTENDED_TMO;
+ }
+ }
+ if (subsys == LPFC_MBOX_SUBSYSTEM_FCOE) {
+ switch (opcode) {
+ case LPFC_MBOX_OPCODE_FCOE_SET_FCLINK_SETTINGS:
+ return LPFC_MBOX_SLI4_CONFIG_EXTENDED_TMO;
+ }
+ }
return LPFC_MBOX_SLI4_CONFIG_TMO;
}
return LPFC_MBOX_TMO;
@@ -1859,7 +1884,7 @@ lpfc_sli4_mbox_rsrc_extent(struct lpfc_hba *phba, struct lpfcMboxq *mbox,
}
/* Complete the initialization for the particular Opcode. */
- opcode = lpfc_sli4_mbox_opcode_get(phba, mbox);
+ opcode = lpfc_sli_config_mbox_opcode_get(phba, mbox);
switch (opcode) {
case LPFC_MBOX_OPCODE_ALLOC_RSRC_EXTENT:
if (emb == LPFC_SLI4_MBX_EMBED)
@@ -1886,23 +1911,56 @@ lpfc_sli4_mbox_rsrc_extent(struct lpfc_hba *phba, struct lpfcMboxq *mbox,
}
/**
- * lpfc_sli4_mbox_opcode_get - Get the opcode from a sli4 mailbox command
+ * lpfc_sli_config_mbox_subsys_get - Get subsystem from a sli_config mbox cmd
* @phba: pointer to lpfc hba data structure.
- * @mbox: pointer to lpfc mbox command.
+ * @mbox: pointer to lpfc mbox command queue entry.
+ *
+ * This routine gets the subsystem from a SLI4 specific SLI_CONFIG mailbox
+ * command. If the mailbox command is not MBX_SLI4_CONFIG (0x9B) or if the
+ * sub-header is not present, subsystem LPFC_MBOX_SUBSYSTEM_NA (0x0) shall
+ * be returned.
+ **/
+uint8_t
+lpfc_sli_config_mbox_subsys_get(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox)
+{
+ struct lpfc_mbx_sli4_config *sli4_cfg;
+ union lpfc_sli4_cfg_shdr *cfg_shdr;
+
+ if (mbox->u.mb.mbxCommand != MBX_SLI4_CONFIG)
+ return LPFC_MBOX_SUBSYSTEM_NA;
+ sli4_cfg = &mbox->u.mqe.un.sli4_config;
+
+ /* For embedded mbox command, get opcode from embedded sub-header*/
+ if (bf_get(lpfc_mbox_hdr_emb, &sli4_cfg->header.cfg_mhdr)) {
+ cfg_shdr = &mbox->u.mqe.un.sli4_config.header.cfg_shdr;
+ return bf_get(lpfc_mbox_hdr_subsystem, &cfg_shdr->request);
+ }
+
+ /* For non-embedded mbox command, get opcode from first dma page */
+ if (unlikely(!mbox->sge_array))
+ return LPFC_MBOX_SUBSYSTEM_NA;
+ cfg_shdr = (union lpfc_sli4_cfg_shdr *)mbox->sge_array->addr[0];
+ return bf_get(lpfc_mbox_hdr_subsystem, &cfg_shdr->request);
+}
+
+/**
+ * lpfc_sli_config_mbox_opcode_get - Get opcode from a sli_config mbox cmd
+ * @phba: pointer to lpfc hba data structure.
+ * @mbox: pointer to lpfc mbox command queue entry.
*
- * This routine gets the opcode from a SLI4 specific mailbox command for
- * sending IOCTL command. If the mailbox command is not MBX_SLI4_CONFIG
- * (0x9B) or if the IOCTL sub-header is not present, opcode 0x0 shall be
+ * This routine gets the opcode from a SLI4 specific SLI_CONFIG mailbox
+ * command. If the mailbox command is not MBX_SLI4_CONFIG (0x9B) or if
+ * the sub-header is not present, opcode LPFC_MBOX_OPCODE_NA (0x0) be
* returned.
**/
uint8_t
-lpfc_sli4_mbox_opcode_get(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
+lpfc_sli_config_mbox_opcode_get(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox)
{
struct lpfc_mbx_sli4_config *sli4_cfg;
union lpfc_sli4_cfg_shdr *cfg_shdr;
if (mbox->u.mb.mbxCommand != MBX_SLI4_CONFIG)
- return 0;
+ return LPFC_MBOX_OPCODE_NA;
sli4_cfg = &mbox->u.mqe.un.sli4_config;
/* For embedded mbox command, get opcode from embedded sub-header*/
@@ -1913,7 +1971,7 @@ lpfc_sli4_mbox_opcode_get(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
/* For non-embedded mbox command, get opcode from first dma page */
if (unlikely(!mbox->sge_array))
- return 0;
+ return LPFC_MBOX_OPCODE_NA;
cfg_shdr = (union lpfc_sli4_cfg_shdr *)mbox->sge_array->addr[0];
return bf_get(lpfc_mbox_hdr_opcode, &cfg_shdr->request);
}
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 332c6b716f81..c48cd0be1a59 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -2200,10 +2200,13 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba)
/* Unknown mailbox command compl */
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"(%d):0323 Unknown Mailbox command "
- "x%x (x%x) Cmpl\n",
+ "x%x (x%x/x%x) Cmpl\n",
pmb->vport ? pmb->vport->vpi : 0,
pmbox->mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, pmb));
+ lpfc_sli_config_mbox_subsys_get(phba,
+ pmb),
+ lpfc_sli_config_mbox_opcode_get(phba,
+ pmb));
phba->link_state = LPFC_HBA_ERROR;
phba->work_hs = HS_FFER3;
lpfc_handle_eratt(phba);
@@ -2215,17 +2218,19 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba)
if (pmbox->mbxStatus == MBXERR_NO_RESOURCES) {
/* Mbox cmd cmpl error - RETRYing */
lpfc_printf_log(phba, KERN_INFO,
- LOG_MBOX | LOG_SLI,
- "(%d):0305 Mbox cmd cmpl "
- "error - RETRYing Data: x%x "
- "(x%x) x%x x%x x%x\n",
- pmb->vport ? pmb->vport->vpi :0,
- pmbox->mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba,
- pmb),
- pmbox->mbxStatus,
- pmbox->un.varWords[0],
- pmb->vport->port_state);
+ LOG_MBOX | LOG_SLI,
+ "(%d):0305 Mbox cmd cmpl "
+ "error - RETRYing Data: x%x "
+ "(x%x/x%x) x%x x%x x%x\n",
+ pmb->vport ? pmb->vport->vpi : 0,
+ pmbox->mbxCommand,
+ lpfc_sli_config_mbox_subsys_get(phba,
+ pmb),
+ lpfc_sli_config_mbox_opcode_get(phba,
+ pmb),
+ pmbox->mbxStatus,
+ pmbox->un.varWords[0],
+ pmb->vport->port_state);
pmbox->mbxStatus = 0;
pmbox->mbxOwner = OWN_HOST;
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
@@ -2236,11 +2241,12 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba)
/* Mailbox cmd <cmd> Cmpl <cmpl> */
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
- "(%d):0307 Mailbox cmd x%x (x%x) Cmpl x%p "
+ "(%d):0307 Mailbox cmd x%x (x%x/x%x) Cmpl x%p "
"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x\n",
pmb->vport ? pmb->vport->vpi : 0,
pmbox->mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, pmb),
+ lpfc_sli_config_mbox_subsys_get(phba, pmb),
+ lpfc_sli_config_mbox_opcode_get(phba, pmb),
pmb->mbox_cmpl,
*((uint32_t *) pmbox),
pmbox->un.varWords[0],
@@ -4754,7 +4760,7 @@ lpfc_sli4_get_avail_extnt_rsrc(struct lpfc_hba *phba, uint16_t type,
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
if (unlikely(rc)) {
@@ -4911,7 +4917,7 @@ lpfc_sli4_cfg_post_extnts(struct lpfc_hba *phba, uint16_t *extnt_cnt,
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
@@ -5194,7 +5200,7 @@ lpfc_sli4_dealloc_extent(struct lpfc_hba *phba, uint16_t type)
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, mbox_tmo);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
if (unlikely(rc)) {
@@ -5619,7 +5625,7 @@ lpfc_sli4_get_allocated_extnts(struct lpfc_hba *phba, uint16_t type,
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
@@ -6322,7 +6328,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
}
/* timeout active mbox command */
mod_timer(&psli->mbox_tmo, (jiffies +
- (HZ * lpfc_mbox_tmo_val(phba, mb->mbxCommand))));
+ (HZ * lpfc_mbox_tmo_val(phba, pmbox))));
}
/* Mailbox cmd <cmd> issue */
@@ -6446,9 +6452,8 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
drvr_flag);
goto out_not_finished;
}
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
- mb->mbxCommand) *
- 1000) + jiffies;
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, pmbox) *
+ 1000) + jiffies;
i = 0;
/* Wait for command to complete */
while (((word0 & OWN_CHIP) == OWN_CHIP) ||
@@ -6559,21 +6564,21 @@ static int
lpfc_sli4_async_mbox_block(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
- uint8_t actcmd = MBX_HEARTBEAT;
int rc = 0;
- unsigned long timeout;
+ unsigned long timeout = 0;
/* Mark the asynchronous mailbox command posting as blocked */
spin_lock_irq(&phba->hbalock);
psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
- if (phba->sli.mbox_active)
- actcmd = phba->sli.mbox_active->u.mb.mbxCommand;
- spin_unlock_irq(&phba->hbalock);
/* Determine how long we might wait for the active mailbox
* command to be gracefully completed by firmware.
*/
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, actcmd) * 1000) +
- jiffies;
+ if (phba->sli.mbox_active)
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
+ phba->sli.mbox_active) *
+ 1000) + jiffies;
+ spin_unlock_irq(&phba->hbalock);
+
/* Wait for the outstnading mailbox command to complete */
while (phba->sli.mbox_active) {
/* Check active mailbox complete status every 2ms */
@@ -6668,11 +6673,12 @@ lpfc_sli4_post_sync_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
spin_unlock_irqrestore(&phba->hbalock, iflag);
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "(%d):2532 Mailbox command x%x (x%x) "
+ "(%d):2532 Mailbox command x%x (x%x/x%x) "
"cannot issue Data: x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
psli->sli_flag, MBX_POLL);
return MBXERR_ERROR;
}
@@ -6695,7 +6701,7 @@ lpfc_sli4_post_sync_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
dma_address = &phba->sli4_hba.bmbx.dma_address;
writel(dma_address->addr_hi, phba->sli4_hba.BMBXregaddr);
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mbx_cmnd)
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mboxq)
* 1000) + jiffies;
do {
bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
@@ -6711,7 +6717,7 @@ lpfc_sli4_post_sync_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
/* Post the low mailbox dma address to the port. */
writel(dma_address->addr_lo, phba->sli4_hba.BMBXregaddr);
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mbx_cmnd)
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mboxq)
* 1000) + jiffies;
do {
bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
@@ -6750,11 +6756,12 @@ lpfc_sli4_post_sync_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
lpfc_sli4_swap_str(phba, mboxq);
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
- "(%d):0356 Mailbox cmd x%x (x%x) Status x%x "
+ "(%d):0356 Mailbox cmd x%x (x%x/x%x) Status x%x "
"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x"
" x%x x%x CQ: x%x x%x x%x x%x\n",
- mboxq->vport ? mboxq->vport->vpi : 0,
- mbx_cmnd, lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ mboxq->vport ? mboxq->vport->vpi : 0, mbx_cmnd,
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
bf_get(lpfc_mqe_status, mb),
mb->un.mb_words[0], mb->un.mb_words[1],
mb->un.mb_words[2], mb->un.mb_words[3],
@@ -6800,11 +6807,12 @@ lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
rc = lpfc_mbox_dev_check(phba);
if (unlikely(rc)) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "(%d):2544 Mailbox command x%x (x%x) "
+ "(%d):2544 Mailbox command x%x (x%x/x%x) "
"cannot issue Data: x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
psli->sli_flag, flag);
goto out_not_finished;
}
@@ -6818,20 +6826,25 @@ lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
if (rc != MBX_SUCCESS)
lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
"(%d):2541 Mailbox command x%x "
- "(x%x) cannot issue Data: x%x x%x\n",
+ "(x%x/x%x) cannot issue Data: "
+ "x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba,
+ mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba,
+ mboxq),
psli->sli_flag, flag);
return rc;
} else if (flag == MBX_POLL) {
lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
"(%d):2542 Try to issue mailbox command "
- "x%x (x%x) synchronously ahead of async"
+ "x%x (x%x/x%x) synchronously ahead of async"
"mailbox command queue: x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
psli->sli_flag, flag);
/* Try to block the asynchronous mailbox posting */
rc = lpfc_sli4_async_mbox_block(phba);
@@ -6840,16 +6853,18 @@ lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
rc = lpfc_sli4_post_sync_mbox(phba, mboxq);
if (rc != MBX_SUCCESS)
lpfc_printf_log(phba, KERN_ERR,
- LOG_MBOX | LOG_SLI,
- "(%d):2597 Mailbox command "
- "x%x (x%x) cannot issue "
- "Data: x%x x%x\n",
- mboxq->vport ?
- mboxq->vport->vpi : 0,
- mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba,
- mboxq),
- psli->sli_flag, flag);
+ LOG_MBOX | LOG_SLI,
+ "(%d):2597 Mailbox command "
+ "x%x (x%x/x%x) cannot issue "
+ "Data: x%x x%x\n",
+ mboxq->vport ?
+ mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli_config_mbox_subsys_get(phba,
+ mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba,
+ mboxq),
+ psli->sli_flag, flag);
/* Unblock the async mailbox posting afterward */
lpfc_sli4_async_mbox_unblock(phba);
}
@@ -6860,11 +6875,12 @@ lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
rc = lpfc_mbox_cmd_check(phba, mboxq);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "(%d):2543 Mailbox command x%x (x%x) "
+ "(%d):2543 Mailbox command x%x (x%x/x%x) "
"cannot issue Data: x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
psli->sli_flag, flag);
goto out_not_finished;
}
@@ -6876,10 +6892,11 @@ lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
spin_unlock_irqrestore(&phba->hbalock, iflags);
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
"(%d):0354 Mbox cmd issue - Enqueue Data: "
- "x%x (x%x) x%x x%x x%x\n",
+ "x%x (x%x/x%x) x%x x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0xffffff,
bf_get(lpfc_mqe_command, &mboxq->u.mqe),
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
phba->pport->port_state,
psli->sli_flag, MBX_NOWAIT);
/* Wake up worker thread to transport mailbox command from head */
@@ -6956,13 +6973,14 @@ lpfc_sli4_post_async_mbox(struct lpfc_hba *phba)
/* Start timer for the mbox_tmo and log some mailbox post messages */
mod_timer(&psli->mbox_tmo, (jiffies +
- (HZ * lpfc_mbox_tmo_val(phba, mbx_cmnd))));
+ (HZ * lpfc_mbox_tmo_val(phba, mboxq))));
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
- "(%d):0355 Mailbox cmd x%x (x%x) issue Data: "
+ "(%d):0355 Mailbox cmd x%x (x%x/x%x) issue Data: "
"x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0, mbx_cmnd,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
phba->pport->port_state, psli->sli_flag);
if (mbx_cmnd != MBX_HEARTBEAT) {
@@ -6986,11 +7004,12 @@ lpfc_sli4_post_async_mbox(struct lpfc_hba *phba)
rc = lpfc_sli4_mq_put(phba->sli4_hba.mbx_wq, mqe);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "(%d):2533 Mailbox command x%x (x%x) "
+ "(%d):2533 Mailbox command x%x (x%x/x%x) "
"cannot issue Data: x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
psli->sli_flag, MBX_NOWAIT);
goto out_not_finished;
}
@@ -9407,23 +9426,24 @@ void
lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
- uint8_t actcmd = MBX_HEARTBEAT;
unsigned long timeout;
+ timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies;
spin_lock_irq(&phba->hbalock);
psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
spin_unlock_irq(&phba->hbalock);
if (psli->sli_flag & LPFC_SLI_ACTIVE) {
spin_lock_irq(&phba->hbalock);
- if (phba->sli.mbox_active)
- actcmd = phba->sli.mbox_active->u.mb.mbxCommand;
- spin_unlock_irq(&phba->hbalock);
/* Determine how long we might wait for the active mailbox
* command to be gracefully completed by firmware.
*/
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, actcmd) *
- 1000) + jiffies;
+ if (phba->sli.mbox_active)
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
+ phba->sli.mbox_active) *
+ 1000) + jiffies;
+ spin_unlock_irq(&phba->hbalock);
+
while (phba->sli.mbox_active) {
/* Check active mailbox complete status every 2ms */
msleep(2);
@@ -12532,7 +12552,7 @@ lpfc_sli4_post_sgl(struct lpfc_hba *phba,
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
/* The IOCTL status is embedded in the mailbox subheader. */
@@ -12747,7 +12767,7 @@ lpfc_sli4_post_els_sgl_list(struct lpfc_hba *phba)
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
@@ -12910,7 +12930,7 @@ lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba)
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
@@ -13034,7 +13054,7 @@ lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba, struct list_head *sblist,
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
@@ -13190,7 +13210,7 @@ lpfc_sli4_post_scsi_sgl_blk_ext(struct lpfc_hba *phba, struct list_head *sblist,
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
@@ -14356,7 +14376,7 @@ lpfc_sli4_init_vpi(struct lpfc_vport *vport)
if (!mboxq)
return -ENOMEM;
lpfc_init_vpi(phba, mboxq, vport->vpi);
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_INIT_VPI);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq);
rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
if (rc != MBX_SUCCESS) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_SLI,
@@ -15232,7 +15252,7 @@ lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
/* The IOCTL status is embedded in the mailbox subheader. */
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index a0075b0af142..29c13b63e323 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -293,13 +293,11 @@ struct lpfc_sli {
struct lpfc_lnk_stat lnk_stat_offsets;
};
-#define LPFC_MBOX_TMO 30 /* Sec tmo for outstanding mbox
- command */
-#define LPFC_MBOX_SLI4_CONFIG_TMO 60 /* Sec tmo for outstanding mbox
- command */
-#define LPFC_MBOX_TMO_FLASH_CMD 300 /* Sec tmo for outstanding FLASH write
- * or erase cmds. This is especially
- * long because of the potential of
- * multiple flash erases that can be
- * spawned.
- */
+/* Timeout for normal outstanding mbox command (Seconds) */
+#define LPFC_MBOX_TMO 30
+/* Timeout for non-flash-based outstanding sli_config mbox command (Seconds) */
+#define LPFC_MBOX_SLI4_CONFIG_TMO 60
+/* Timeout for flash-based outstanding sli_config mbox command (Seconds) */
+#define LPFC_MBOX_SLI4_CONFIG_EXTENDED_TMO 300
+/* Timeout for other flash-based outstanding mbox command (Seconds) */
+#define LPFC_MBOX_TMO_FLASH_CMD 300
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 7888964d5b7a..78c6038c5abc 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -635,5 +635,5 @@ void lpfc_mbx_cmpl_fcf_rr_read_fcf_rec(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbx_cmpl_read_fcf_rec(struct lpfc_hba *, LPFC_MBOXQ_t *);
int lpfc_sli4_unregister_fcf(struct lpfc_hba *);
int lpfc_sli4_post_status_check(struct lpfc_hba *);
-uint8_t lpfc_sli4_mbox_opcode_get(struct lpfc_hba *, struct lpfcMboxq *);
-
+uint8_t lpfc_sli_config_mbox_subsys_get(struct lpfc_hba *, LPFC_MBOXQ_t *);
+uint8_t lpfc_sli_config_mbox_opcode_get(struct lpfc_hba *, LPFC_MBOXQ_t *);
OpenPOWER on IntegriCloud