summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/libsas/sas_scsi_host.c
diff options
context:
space:
mode:
authorDan Williams <dan.j.williams@intel.com>2011-09-30 18:52:19 -0700
committerJames Bottomley <JBottomley@Parallels.com>2011-10-02 13:20:03 -0500
commitb50102d3e9a43a75379407c2080f696f61cb286b (patch)
treeb37eb5ed05f2228842c54cdac455f00ec846746e /drivers/scsi/libsas/sas_scsi_host.c
parent4f3f812dd3b638d0c92661122dcccd6aaef66bfb (diff)
downloadblackbird-op-linux-b50102d3e9a43a75379407c2080f696f61cb286b.tar.gz
blackbird-op-linux-b50102d3e9a43a75379407c2080f696f61cb286b.zip
[SCSI] isci: atapi support
Based on original implementation from Jiangbi Liu and Maciej Trela. ATAPI transfers happen in two-to-three stages. The two stage atapi commands are those that include a dma data transfer. The data transfer portion of these operations is handled by the hardware packet-dma acceleration. The three-stage commands do not have a data transfer and are handled without hardware assistance in raw frame mode. stage1: transmit host-to-device fis to notify the device of an incoming atapi cdb. Upon reception of the pio-setup-fis repost the task_context to perform the dma transfer of the cdb+data (go to stage3), or repost the task_context to transmit the cdb as a raw frame (go to stage 2). stage2: wait for hardware notification of the cdb transmission and then go to stage 3. stage3: wait for the arrival of the terminating device-to-host fis and terminate the command. To keep the implementation simple we only support ATAPI packet-dma protocol (for commands with data) to avoid needing to handle the data transfer manually (like we do for SATA-PIO). This may affect compatibility for a small number of devices (see ATA_HORKAGE_ATAPI_MOD16_DMA). If the data-transfer underruns, or encounters an error the device-to-host fis is expected to arrive in the unsolicited frame queue to pass to libata for disposition. However, in the DONE_UNEXP_FIS (data underrun) case it appears we need to craft a response. In the DONE_REG_ERR case we do receive the UF and propagate it to libsas. Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers/scsi/libsas/sas_scsi_host.c')
-rw-r--r--drivers/scsi/libsas/sas_scsi_host.c2
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index ebd1417339e9..b2c4a7731656 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -801,7 +801,7 @@ void sas_slave_destroy(struct scsi_device *scsi_dev)
struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
if (dev_is_sata(dev))
- dev->sata_dev.ap->link.device[0].class = ATA_DEV_NONE;
+ sas_to_ata_dev(dev)->class = ATA_DEV_NONE;
}
int sas_change_queue_depth(struct scsi_device *sdev, int depth, int reason)
OpenPOWER on IntegriCloud