diff options
author | Jeff Garzik <jgarzik@pobox.com> | 2005-10-09 10:40:44 -0400 |
---|---|---|
committer | Jeff Garzik <jgarzik@pobox.com> | 2005-10-09 10:40:44 -0400 |
commit | ffe75ef650e1aec26a84bd82a620b5e27df9ed34 (patch) | |
tree | 8ed31fa093cbf6f6d6142e0e2118bee26aa71fa7 /drivers/scsi/libata-scsi.c | |
parent | 9dc263239bb2cfeb242d8ef758fca66a968822d5 (diff) | |
parent | e710245bb0f980adfb1dfe850e43761a8117c6be (diff) | |
download | blackbird-op-linux-ffe75ef650e1aec26a84bd82a620b5e27df9ed34.tar.gz blackbird-op-linux-ffe75ef650e1aec26a84bd82a620b5e27df9ed34.zip |
Merge branch 'upstream'
Diffstat (limited to 'drivers/scsi/libata-scsi.c')
-rw-r--r-- | drivers/scsi/libata-scsi.c | 664 |
1 files changed, 494 insertions, 170 deletions
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 1b00bc618e15..698203bf4f69 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -52,6 +52,14 @@ static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev); +static void ata_scsi_invalid_field(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)) +{ + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + done(cmd); +} + /** * ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd. * @sdev: SCSI device for which BIOS geometry is to be determined @@ -385,6 +393,7 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, u8 *ascq) { int i; + /* Based on the 3ware driver translation table */ static unsigned char sense_table[][4] = { /* BBD|ECC|ID|MAR */ @@ -596,10 +605,7 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc) sb[0] = 0x70; sb[7] = 0x0a; -#if 0 /* when C/H/S support is merged */ if (tf->flags & ATA_TFLAG_LBA && !(tf->flags & ATA_TFLAG_LBA48)) { -#endif - if (!(tf->flags & ATA_TFLAG_LBA48)) { /* A small (28b) LBA will fit in the 32b info field */ sb[0] |= 0x80; /* set valid bit */ sb[3] = tf->device & 0x0f; @@ -714,15 +720,26 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, ; /* ignore IMMED bit, violates sat-r05 */ } if (scsicmd[4] & 0x2) - return 1; /* LOEJ bit set not supported */ + goto invalid_fld; /* LOEJ bit set not supported */ if (((scsicmd[4] >> 4) & 0xf) != 0) - return 1; /* power conditions not supported */ + goto invalid_fld; /* power conditions not supported */ if (scsicmd[4] & 0x1) { tf->nsect = 1; /* 1 sector, lba=0 */ - tf->lbah = 0x0; - tf->lbam = 0x0; - tf->lbal = 0x0; - tf->device |= ATA_LBA; + + if (qc->dev->flags & ATA_DFLAG_LBA) { + qc->tf.flags |= ATA_TFLAG_LBA; + + tf->lbah = 0x0; + tf->lbam = 0x0; + tf->lbal = 0x0; + tf->device |= ATA_LBA; + } else { + /* CHS */ + tf->lbal = 0x1; /* sect */ + tf->lbam = 0x0; /* cyl low */ + tf->lbah = 0x0; /* cyl high */ + } + tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ } else { tf->nsect = 0; /* time period value (0 implies now) */ @@ -737,6 +754,11 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, */ return 0; + +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; } @@ -772,6 +794,99 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) } /** + * scsi_6_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 6-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_6_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("six-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 8; + lba |= ((u64)scsicmd[3]); + + len |= ((u32)scsicmd[4]); + + *plba = lba; + *plen = len; +} + +/** + * scsi_10_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 10-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_10_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("ten-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 24; + lba |= ((u64)scsicmd[3]) << 16; + lba |= ((u64)scsicmd[4]) << 8; + lba |= ((u64)scsicmd[5]); + + len |= ((u32)scsicmd[7]) << 8; + len |= ((u32)scsicmd[8]); + + *plba = lba; + *plen = len; +} + +/** + * scsi_16_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 16-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_16_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("sixteen-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 56; + lba |= ((u64)scsicmd[3]) << 48; + lba |= ((u64)scsicmd[4]) << 40; + lba |= ((u64)scsicmd[5]) << 32; + lba |= ((u64)scsicmd[6]) << 24; + lba |= ((u64)scsicmd[7]) << 16; + lba |= ((u64)scsicmd[8]) << 8; + lba |= ((u64)scsicmd[9]); + + len |= ((u32)scsicmd[10]) << 24; + len |= ((u32)scsicmd[11]) << 16; + len |= ((u32)scsicmd[12]) << 8; + len |= ((u32)scsicmd[13]); + + *plba = lba; + *plen = len; +} + +/** * ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one * @qc: Storage for translated ATA taskfile * @scsicmd: SCSI command to translate @@ -788,79 +903,102 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; + unsigned int lba = tf->flags & ATA_TFLAG_LBA; unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; u64 dev_sectors = qc->dev->n_sectors; - u64 sect = 0; - u32 n_sect = 0; + u64 block; + u32 n_block; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->protocol = ATA_PROT_NODATA; - tf->device |= ATA_LBA; - - if (scsicmd[0] == VERIFY) { - sect |= ((u64)scsicmd[2]) << 24; - sect |= ((u64)scsicmd[3]) << 16; - sect |= ((u64)scsicmd[4]) << 8; - sect |= ((u64)scsicmd[5]); - - n_sect |= ((u32)scsicmd[7]) << 8; - n_sect |= ((u32)scsicmd[8]); - } - - else if (scsicmd[0] == VERIFY_16) { - sect |= ((u64)scsicmd[2]) << 56; - sect |= ((u64)scsicmd[3]) << 48; - sect |= ((u64)scsicmd[4]) << 40; - sect |= ((u64)scsicmd[5]) << 32; - sect |= ((u64)scsicmd[6]) << 24; - sect |= ((u64)scsicmd[7]) << 16; - sect |= ((u64)scsicmd[8]) << 8; - sect |= ((u64)scsicmd[9]); - - n_sect |= ((u32)scsicmd[10]) << 24; - n_sect |= ((u32)scsicmd[11]) << 16; - n_sect |= ((u32)scsicmd[12]) << 8; - n_sect |= ((u32)scsicmd[13]); - } + if (scsicmd[0] == VERIFY) + scsi_10_lba_len(scsicmd, &block, &n_block); + else if (scsicmd[0] == VERIFY_16) + scsi_16_lba_len(scsicmd, &block, &n_block); else - return 1; - - if (!n_sect) - return 1; - if (sect >= dev_sectors) - return 1; - if ((sect + n_sect) > dev_sectors) - return 1; + goto invalid_fld; + + if (!n_block) + goto nothing_to_do; + if (block >= dev_sectors) + goto out_of_range; + if ((block + n_block) > dev_sectors) + goto out_of_range; if (lba48) { - if (n_sect > (64 * 1024)) - return 1; + if (n_block > (64 * 1024)) + goto invalid_fld; } else { - if (n_sect > 256) - return 1; + if (n_block > 256) + goto invalid_fld; } - if (lba48) { - tf->command = ATA_CMD_VERIFY_EXT; + if (lba) { + if (lba48) { + tf->command = ATA_CMD_VERIFY_EXT; - tf->hob_nsect = (n_sect >> 8) & 0xff; + tf->hob_nsect = (n_block >> 8) & 0xff; - tf->hob_lbah = (sect >> 40) & 0xff; - tf->hob_lbam = (sect >> 32) & 0xff; - tf->hob_lbal = (sect >> 24) & 0xff; + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + } else { + tf->command = ATA_CMD_VERIFY; + + tf->device |= (block >> 24) & 0xf; + } + + tf->nsect = n_block & 0xff; + + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; + + tf->device |= ATA_LBA; } else { + /* CHS */ + u32 sect, head, cyl, track; + + /* Convert LBA to CHS */ + track = (u32)block / dev->sectors; + cyl = track / dev->heads; + head = track % dev->heads; + sect = (u32)block % dev->sectors + 1; + + DPRINTK("block %u track %u cyl %u head %u sect %u\n", + (u32)block, track, cyl, head, sect); + + /* Check whether the converted CHS can fit. + Cylinder: 0-65535 + Head: 0-15 + Sector: 1-255*/ + if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) + goto out_of_range; + tf->command = ATA_CMD_VERIFY; - - tf->device |= (sect >> 24) & 0xf; + tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ + tf->lbal = sect; + tf->lbam = cyl; + tf->lbah = cyl >> 8; + tf->device |= head; } - tf->nsect = n_sect & 0xff; + return 0; + +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; - tf->lbah = (sect >> 16) & 0xff; - tf->lbam = (sect >> 8) & 0xff; - tf->lbal = sect & 0xff; +out_of_range: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); + /* "Logical Block Address out of range" */ + return 1; - return 0; +nothing_to_do: + qc->scsicmd->result = SAM_STAT_GOOD; + return 1; } /** @@ -886,11 +1024,14 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; + unsigned int lba = tf->flags & ATA_TFLAG_LBA; unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; + u64 block; + u32 n_block; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->protocol = qc->dev->xfer_protocol; - tf->device |= ATA_LBA; if (scsicmd[0] == READ_10 || scsicmd[0] == READ_6 || scsicmd[0] == READ_16) { @@ -900,89 +1041,115 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->flags |= ATA_TFLAG_WRITE; } - if (scsicmd[0] == READ_10 || scsicmd[0] == WRITE_10) { - if (lba48) { - tf->hob_nsect = scsicmd[7]; - tf->hob_lbal = scsicmd[2]; - - qc->nsect = ((unsigned int)scsicmd[7] << 8) | - scsicmd[8]; - } else { - /* if we don't support LBA48 addressing, the request - * -may- be too large. */ - if ((scsicmd[2] & 0xf0) || scsicmd[7]) - return 1; - - /* stores LBA27:24 in lower 4 bits of device reg */ - tf->device |= scsicmd[2]; + /* Calculate the SCSI LBA and transfer length. */ + switch (scsicmd[0]) { + case READ_10: + case WRITE_10: + scsi_10_lba_len(scsicmd, &block, &n_block); + break; + case READ_6: + case WRITE_6: + scsi_6_lba_len(scsicmd, &block, &n_block); - qc->nsect = scsicmd[8]; - } + /* for 6-byte r/w commands, transfer length 0 + * means 256 blocks of data, not 0 block. + */ + if (!n_block) + n_block = 256; + break; + case READ_16: + case WRITE_16: + scsi_16_lba_len(scsicmd, &block, &n_block); + break; + default: + DPRINTK("no-byte command\n"); + goto invalid_fld; + } - tf->nsect = scsicmd[8]; - tf->lbal = scsicmd[5]; - tf->lbam = scsicmd[4]; - tf->lbah = scsicmd[3]; + /* Check and compose ATA command */ + if (!n_block) + /* For 10-byte and 16-byte SCSI R/W commands, transfer + * length 0 means transfer 0 block of data. + * However, for ATA R/W commands, sector count 0 means + * 256 or 65536 sectors, not 0 sectors as in SCSI. + */ + goto nothing_to_do; - VPRINTK("ten-byte command\n"); - if (qc->nsect == 0) /* we don't support length==0 cmds */ - return 1; - return 0; - } + if (lba) { + if (lba48) { + /* The request -may- be too large for LBA48. */ + if ((block >> 48) || (n_block > 65536)) + goto out_of_range; - if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) { - qc->nsect = tf->nsect = scsicmd[4]; - if (!qc->nsect) { - qc->nsect = 256; - if (lba48) - tf->hob_nsect = 1; - } + tf->hob_nsect = (n_block >> 8) & 0xff; - tf->lbal = scsicmd[3]; - tf->lbam = scsicmd[2]; - tf->lbah = scsicmd[1] & 0x1f; /* mask out reserved bits */ + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + } else { + /* LBA28 */ - VPRINTK("six-byte command\n"); - return 0; - } + /* The request -may- be too large for LBA28. */ + if ((block >> 28) || (n_block > 256)) + goto out_of_range; - if (scsicmd[0] == READ_16 || scsicmd[0] == WRITE_16) { - /* rule out impossible LBAs and sector counts */ - if (scsicmd[2] || scsicmd[3] || scsicmd[10] || scsicmd[11]) - return 1; + tf->device |= (block >> 24) & 0xf; + } - if (lba48) { - tf->hob_nsect = scsicmd[12]; - tf->hob_lbal = scsicmd[6]; - tf->hob_lbam = scsicmd[5]; - tf->hob_lbah = scsicmd[4]; + qc->nsect = n_block; + tf->nsect = n_block & 0xff; - qc->nsect = ((unsigned int)scsicmd[12] << 8) | - scsicmd[13]; - } else { - /* once again, filter out impossible non-zero values */ - if (scsicmd[4] || scsicmd[5] || scsicmd[12] || - (scsicmd[6] & 0xf0)) - return 1; + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; - /* stores LBA27:24 in lower 4 bits of device reg */ - tf->device |= scsicmd[6]; + tf->device |= ATA_LBA; + } else { + /* CHS */ + u32 sect, head, cyl, track; + + /* The request -may- be too large for CHS addressing. */ + if ((block >> 28) || (n_block > 256)) + goto out_of_range; + + /* Convert LBA to CHS */ + track = (u32)block / dev->sectors; + cyl = track / dev->heads; + head = track % dev->heads; + sect = (u32)block % dev->sectors + 1; + + DPRINTK("block %u track %u cyl %u head %u sect %u\n", + (u32)block, track, cyl, head, sect); + + /* Check whether the converted CHS can fit. + Cylinder: 0-65535 + Head: 0-15 + Sector: 1-255*/ + if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) + goto out_of_range; + + qc->nsect = n_block; + tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ + tf->lbal = sect; + tf->lbam = cyl; + tf->lbah = cyl >> 8; + tf->device |= head; + } - qc->nsect = scsicmd[13]; - } + return 0; - tf->nsect = scsicmd[13]; - tf->lbal = scsicmd[9]; - tf->lbam = scsicmd[8]; - tf->lbah = scsicmd[7]; +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; - VPRINTK("sixteen-byte command\n"); - if (qc->nsect == 0) /* we don't support length==0 cmds */ - return 1; - return 0; - } +out_of_range: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); + /* "Logical Block Address out of range" */ + return 1; - DPRINTK("no-byte command\n"); +nothing_to_do: + qc->scsicmd->result = SAM_STAT_GOOD; return 1; } @@ -1040,6 +1207,12 @@ static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) * This function sets up an ata_queued_cmd structure for the * SCSI command, and sends that ata_queued_cmd to the hardware. * + * The xlat_func argument (actor) returns 0 if ready to execute + * ATA command, else 1 to finish translation. If 1 is returned + * then cmd->result (and possibly cmd->sense_buffer) are assumed + * to be set reflecting an error condition or clean (early) + * termination. + * * LOCKING: * spin_lock_irqsave(host_set lock) */ @@ -1056,7 +1229,7 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, qc = ata_scsi_qc_new(ap, dev, cmd, done); if (!qc) - return; + goto err_mem; /* data is present; dma-map it */ if (cmd->sc_data_direction == DMA_FROM_DEVICE || @@ -1064,7 +1237,7 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, if (unlikely(cmd->request_bufflen < 1)) { printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n", ap->id, dev->devno); - goto err_out; + goto err_did; } if (cmd->use_sg) @@ -1079,18 +1252,28 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, qc->complete_fn = ata_scsi_qc_complete; if (xlat_func(qc, scsicmd)) - goto err_out; + goto early_finish; + /* select device, send command to hardware */ if (ata_qc_issue(qc)) - goto err_out; + goto err_did; VPRINTK("EXIT\n"); return; -err_out: +early_finish: + ata_qc_free(qc); + done(cmd); + DPRINTK("EXIT - early finish (good or error)\n"); + return; + +err_did: ata_qc_free(qc); - ata_bad_cdb(cmd, done); - DPRINTK("EXIT - badcmd\n"); +err_mem: + cmd->result = (DID_ERROR << 16); + done(cmd); + DPRINTK("EXIT - internal\n"); + return; } /** @@ -1157,7 +1340,8 @@ static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, u8 *buf) * Mapping the response buffer, calling the command's handler, * and handling the handler's return value. This return value * indicates whether the handler wishes the SCSI command to be - * completed successfully, or not. + * completed successfully (0), or not (in which case cmd->result + * and sense buffer are assumed to be set). * * LOCKING: * spin_lock_irqsave(host_set lock) @@ -1176,12 +1360,9 @@ void ata_scsi_rbuf_fill(struct ata_scsi_args *args, rc = actor(args, rbuf, buflen); ata_scsi_rbuf_put(cmd, rbuf); - if (rc) - ata_bad_cdb(cmd, args->done); - else { + if (rc == 0) cmd->result = SAM_STAT_GOOD; - args->done(cmd); - } + args->done(cmd); } /** @@ -1487,8 +1668,16 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, * in the same manner) */ page_control = scsicmd[2] >> 6; - if ((page_control != 0) && (page_control != 3)) - return 1; + switch (page_control) { + case 0: /* current */ + break; /* supported */ + case 3: /* saved */ + goto saving_not_supp; + case 1: /* changeable */ + case 2: /* defaults */ + default: + goto invalid_fld; + } if (six_byte) output_len = 4; @@ -1519,7 +1708,7 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, break; default: /* invalid page code */ - return 1; + goto invalid_fld; } if (six_byte) { @@ -1532,6 +1721,16 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, } return 0; + +invalid_fld: + ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +saving_not_supp: + ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x39, 0x0); + /* "Saving parameters not supported" */ + return 1; } /** @@ -1554,10 +1753,20 @@ unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, VPRINTK("ENTER\n"); - if (ata_id_has_lba48(args->id)) - n_sectors = ata_id_u64(args->id, 100); - else - n_sectors = ata_id_u32(args->id, 60); + if (ata_id_has_lba(args->id)) { + if (ata_id_has_lba48(args->id)) + n_sectors = ata_id_u64(args->id, 100); + else + n_sectors = ata_id_u32(args->id, 60); + } else { + /* CHS default translation */ + n_sectors = args->id[1] * args->id[3] * args->id[6]; + + if (ata_id_current_chs_valid(args->id)) + /* CHS current translation */ + n_sectors = ata_id_u32(args->id, 57); + } + n_sectors--; /* ATA TotalUserSectors - 1 */ if (args->cmd->cmnd[0] == READ_CAPACITY) { @@ -1621,6 +1830,34 @@ unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, } /** + * ata_scsi_set_sense - Set SCSI sense data and status + * @cmd: SCSI request to be handled + * @sk: SCSI-defined sense key + * @asc: SCSI-defined additional sense code + * @ascq: SCSI-defined additional sense code qualifier + * + * Helper function that builds a valid fixed format, current + * response code and the given sense key (sk), additional sense + * code (asc) and additional sense code qualifier (ascq) with + * a SCSI command status of %SAM_STAT_CHECK_CONDITION and + * DRIVER_SENSE set in the upper bits of scsi_cmnd::result . + * + * LOCKING: + * Not required + */ + +void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) +{ + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; + + cmd->sense_buffer[0] = 0x70; /* fixed format, current */ + cmd->sense_buffer[2] = sk; + cmd->sense_buffer[7] = 18 - 8; /* additional sense length */ + cmd->sense_buffer[12] = asc; + cmd->sense_buffer[13] = ascq; +} + +/** * ata_scsi_badcmd - End a SCSI request with an error * @cmd: SCSI request to be handled * @done: SCSI command completion function @@ -1638,30 +1875,84 @@ unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq) { DPRINTK("ENTER\n"); - cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; - - cmd->sense_buffer[0] = 0x70; - cmd->sense_buffer[2] = ILLEGAL_REQUEST; - cmd->sense_buffer[7] = 14 - 8; /* addnl. sense len. FIXME: correct? */ - cmd->sense_buffer[12] = asc; - cmd->sense_buffer[13] = ascq; + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, asc, ascq); done(cmd); } +void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, + struct scsi_cmnd *cmd) +{ + DECLARE_COMPLETION(wait); + struct ata_queued_cmd *qc; + unsigned long flags; + int rc; + + DPRINTK("ATAPI request sense\n"); + + qc = ata_qc_new_init(ap, dev); + BUG_ON(qc == NULL); + + /* FIXME: is this needed? */ + memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); + + ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); + qc->dma_dir = DMA_FROM_DEVICE; + + memset(&qc->cdb, 0, ap->cdb_len); + qc->cdb[0] = REQUEST_SENSE; + qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; + + qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + qc->tf.command = ATA_CMD_PACKET; + + qc->tf.protocol = ATA_PROT_ATAPI; + qc->tf.lbam = (8 * 1024) & 0xff; + qc->tf.lbah = (8 * 1024) >> 8; + qc->nbytes = SCSI_SENSE_BUFFERSIZE; + + qc->waiting = &wait; + qc->complete_fn = ata_qc_complete_noop; + + spin_lock_irqsave(&ap->host_set->lock, flags); + rc = ata_qc_issue(qc); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (rc) + ata_port_disable(ap); + else + wait_for_completion(&wait); + + DPRINTK("EXIT\n"); +} + static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; - if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ))) { + VPRINTK("ENTER, drv_stat == 0x%x\n", drv_stat); + + if (unlikely(drv_stat & (ATA_BUSY | ATA_DRQ))) + ata_to_sense_error(qc, drv_stat); + + else if (unlikely(drv_stat & ATA_ERR)) { DPRINTK("request check condition\n"); + /* FIXME: command completion with check condition + * but no sense causes the error handler to run, + * which then issues REQUEST SENSE, fills in the sense + * buffer, and completes the command (for the second + * time). We need to issue REQUEST SENSE some other + * way, to avoid completing the command twice. + */ cmd->result = SAM_STAT_CHECK_CONDITION; qc->scsidone(cmd); return 1; - } else { + } + + else { u8 *scsicmd = cmd->cmnd; if (scsicmd[0] == INQUIRY) { @@ -1669,15 +1960,30 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) unsigned int buflen; buflen = ata_scsi_rbuf_get(cmd, &buf); - buf[2] = 0x5; - buf[3] = (buf[3] & 0xf0) | 2; + + /* ATAPI devices typically report zero for their SCSI version, + * and sometimes deviate from the spec WRT response data + * format. If SCSI version is reported as zero like normal, + * then we make the following fixups: 1) Fake MMC-5 version, + * to indicate to the Linux scsi midlayer this is a modern + * device. 2) Ensure response data format / ATAPI information + * are always correct. + */ + /* FIXME: do we ever override EVPD pages and the like, with + * this code? + */ + if (buf[2] == 0) { + buf[2] = 0x5; + buf[3] = 0x32; + } + ata_scsi_rbuf_put(cmd, buf); } + cmd->result = SAM_STAT_GOOD; } qc->scsidone(cmd); - return 0; } /** @@ -2080,7 +2386,7 @@ void ata_scsi_simulate(u16 *id, case INQUIRY: if (scsicmd[1] & 2) /* is CmdDt set? */ - ata_bad_cdb(cmd, done); + ata_scsi_invalid_field(cmd, done); else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */ ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std); else if (scsicmd[2] == 0x00) @@ -2090,7 +2396,7 @@ void ata_scsi_simulate(u16 *id, else if (scsicmd[2] == 0x83) ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83); else - ata_bad_cdb(cmd, done); + ata_scsi_invalid_field(cmd, done); break; case MODE_SENSE: @@ -2100,7 +2406,7 @@ void ata_scsi_simulate(u16 *id, case MODE_SELECT: /* unconditionally return */ case MODE_SELECT_10: /* bad-field-in-cdb */ - ata_bad_cdb(cmd, done); + ata_scsi_invalid_field(cmd, done); break; case READ_CAPACITY: @@ -2111,7 +2417,7 @@ void ata_scsi_simulate(u16 *id, if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16) ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); else - ata_bad_cdb(cmd, done); + ata_scsi_invalid_field(cmd, done); break; case REPORT_LUNS: @@ -2123,8 +2429,26 @@ void ata_scsi_simulate(u16 *id, /* all other commands */ default: - ata_bad_scsiop(cmd, done); + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0); + /* "Invalid command operation code" */ + done(cmd); break; } } +void ata_scsi_scan_host(struct ata_port *ap) +{ + struct ata_device *dev; + unsigned int i; + + if (ap->flags & ATA_FLAG_PORT_DISABLED) + return; + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + if (ata_dev_present(dev)) + scsi_scan_target(&ap->host->shost_gendev, 0, i, 0, 0); + } +} + |