Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits)
  [SCSI] qla4xxx: export address/port of connection (fix udev disk names)
  [SCSI] ipr: Fix BUG on adapter dump timeout
  [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer
  [SCSI] hpsa: change confusing message to be more clear
  [SCSI] iscsi class: fix vlan configuration
  [SCSI] qla4xxx: fix data alignment and use nl helpers
  [SCSI] iscsi class: fix link local mispelling
  [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA
  [SCSI] aacraid: use lower snprintf() limit
  [SCSI] lpfc 8.3.27: Change driver version to 8.3.27
  [SCSI] lpfc 8.3.27: T10 additions for SLI4
  [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery
  [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name
  [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout
  [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes
  [SCSI] megaraid_sas: Changelog and version update
  [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic
  [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support
  [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers
  [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts
  ...

15 files changed, 522 insertions, 198 deletions

diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index 6981b773a88d..f07f30fada1b 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -1263,6 +1263,10 @@ void isci_host_deinit(struct isci_host *ihost)
 {
 	int i;
 
+	/* disable output data selects */
+	for (i = 0; i < isci_gpio_count(ihost); i++)
+		writel(SGPIO_HW_CONTROL, &ihost->scu_registers->peg0.sgpio.output_data_select[i]);
+
 	isci_host_change_state(ihost, isci_stopping);
 	for (i = 0; i < SCI_MAX_PORTS; i++) {
 		struct isci_port *iport = &ihost->ports[i];
@@ -1281,6 +1285,12 @@ void isci_host_deinit(struct isci_host *ihost)
 	spin_unlock_irq(&ihost->scic_lock);
 
 	wait_for_stop(ihost);
+
+	/* disable sgpio: where the above wait should give time for the
+	 * enclosure to sample the gpios going inactive
+	 */
+	writel(0, &ihost->scu_registers->peg0.sgpio.interface_control);
+
 	sci_controller_reset(ihost);
 
 	/* Cancel any/all outstanding port timers */
@@ -2365,6 +2375,12 @@ int isci_host_init(struct isci_host *ihost)
 	for (i = 0; i < SCI_MAX_PHYS; i++)
 		isci_phy_init(&ihost->phys[i], ihost, i);
 
+	/* enable sgpio */
+	writel(1, &ihost->scu_registers->peg0.sgpio.interface_control);
+	for (i = 0; i < isci_gpio_count(ihost); i++)
+		writel(SGPIO_HW_CONTROL, &ihost->scu_registers->peg0.sgpio.output_data_select[i]);
+	writel(0, &ihost->scu_registers->peg0.sgpio.vendor_specific_code);
+
 	for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) {
 		struct isci_remote_device *idev = &ihost->devices[i];
 
@@ -2760,3 +2776,56 @@ enum sci_task_status sci_controller_start_task(struct isci_host *ihost,
 
 	return status;
 }
+
+static int sci_write_gpio_tx_gp(struct isci_host *ihost, u8 reg_index, u8 reg_count, u8 *write_data)
+{
+	int d;
+
+	/* no support for TX_GP_CFG */
+	if (reg_index == 0)
+		return -EINVAL;
+
+	for (d = 0; d < isci_gpio_count(ihost); d++) {
+		u32 val = 0x444; /* all ODx.n clear */
+		int i;
+
+		for (i = 0; i < 3; i++) {
+			int bit = (i << 2) + 2;
+
+			bit = try_test_sas_gpio_gp_bit(to_sas_gpio_od(d, i),
+						       write_data, reg_index,
+						       reg_count);
+			if (bit < 0)
+				break;
+
+			/* if od is set, clear the 'invert' bit */
+			val &= ~(bit << ((i << 2) + 2));
+		}
+
+		if (i < 3)
+			break;
+		writel(val, &ihost->scu_registers->peg0.sgpio.output_data_select[d]);
+	}
+
+	/* unless reg_index is > 1, we should always be able to write at
+	 * least one register
+	 */
+	return d > 0;
+}
+
+int isci_gpio_write(struct sas_ha_struct *sas_ha, u8 reg_type, u8 reg_index,
+		    u8 reg_count, u8 *write_data)
+{
+	struct isci_host *ihost = sas_ha->lldd_ha;
+	int written;
+
+	switch (reg_type) {
+	case SAS_GPIO_REG_TX_GP:
+		written = sci_write_gpio_tx_gp(ihost, reg_index, reg_count, write_data);
+		break;
+	default:
+		written = -EINVAL;
+	}
+
+	return written;
+}
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 9f33831a2f04..646051afd3cb 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -440,6 +440,18 @@ static inline bool is_c0(struct pci_dev *pdev)
 	return false;
 }
 
+/* set hw control for 'activity', even though active enclosures seem to drive
+ * the activity led on their own.  Skip setting FSENG control on 'status' due
+ * to unexpected operation and 'error' due to not being a supported automatic
+ * FSENG output
+ */
+#define SGPIO_HW_CONTROL 0x00000443
+
+static inline int isci_gpio_count(struct isci_host *ihost)
+{
+	return ARRAY_SIZE(ihost->scu_registers->peg0.sgpio.output_data_select);
+}
+
 void sci_controller_post_request(struct isci_host *ihost,
 				      u32 request);
 void sci_controller_release_frame(struct isci_host *ihost,
@@ -542,4 +554,7 @@ void sci_port_configuration_agent_construct(
 enum sci_status sci_port_configuration_agent_initialize(
 	struct isci_host *ihost,
 	struct sci_port_configuration_agent *port_agent);
+
+int isci_gpio_write(struct sas_ha_struct *, u8 reg_type, u8 reg_index,
+		    u8 reg_count, u8 *write_data);
 #endif
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 29aa34efb0f5..43fe840fbe9c 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -192,6 +192,9 @@ static struct sas_domain_function_template isci_transport_ops  = {
 
 	/* Phy management */
 	.lldd_control_phy	= isci_phy_control,
+
+	/* GPIO support */
+	.lldd_write_gpio	= isci_gpio_write,
 };
 
 
diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h
index d1de63312e7f..8efeb6b08321 100644
--- a/drivers/scsi/isci/isci.h
+++ b/drivers/scsi/isci/isci.h
@@ -97,7 +97,7 @@
 #define SCU_MAX_COMPLETION_QUEUE_SHIFT	  (ilog2(SCU_MAX_COMPLETION_QUEUE_ENTRIES))
 
 #define SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES (4096)
-#define SCU_UNSOLICITED_FRAME_BUFFER_SIZE   (1024)
+#define SCU_UNSOLICITED_FRAME_BUFFER_SIZE   (1024U)
 #define SCU_INVALID_FRAME_INDEX             (0xFFFF)
 
 #define SCU_IO_REQUEST_MAX_SGE_SIZE         (0x00FFFFFF)
diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c
index 09e61134037f..35f50c2183e1 100644
--- a/drivers/scsi/isci/phy.c
+++ b/drivers/scsi/isci/phy.c
@@ -1313,6 +1313,17 @@ int isci_phy_control(struct asd_sas_phy *sas_phy,
 		ret = isci_port_perform_hard_reset(ihost, iport, iphy);
 
 		break;
+	case PHY_FUNC_GET_EVENTS: {
+		struct scu_link_layer_registers __iomem *r;
+		struct sas_phy *phy = sas_phy->phy;
+
+		r = iphy->link_layer_registers;
+		phy->running_disparity_error_count = readl(&r->running_disparity_error_count);
+		phy->loss_of_dword_sync_count = readl(&r->loss_of_sync_error_count);
+		phy->phy_reset_problem_count = readl(&r->phy_reset_problem_count);
+		phy->invalid_dword_count = readl(&r->invalid_dword_counter);
+		break;
+	}
 
 	default:
 		dev_dbg(&ihost->pdev->dev,
diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c
index 8f6f9b77e41a..8e59c8865dcd 100644
--- a/drivers/scsi/isci/port.c
+++ b/drivers/scsi/isci/port.c
@@ -294,8 +294,8 @@ static void isci_port_link_down(struct isci_host *isci_host,
 					__func__, isci_device);
 				set_bit(IDEV_GONE, &isci_device->flags);
 			}
+			isci_port_change_state(isci_port, isci_stopping);
 		}
-		isci_port_change_state(isci_port, isci_stopping);
 	}
 
 	/* Notify libsas of the borken link, this will trigger calls to our
diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c
index 486b113c634a..38a99d281141 100644
--- a/drivers/scsi/isci/port_config.c
+++ b/drivers/scsi/isci/port_config.c
@@ -678,7 +678,7 @@ static void apc_agent_timeout(unsigned long data)
 	configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask;
 
 	if (!configure_phy_mask)
-		return;
+		goto done;
 
 	for (index = 0; index < SCI_MAX_PHYS; index++) {
 		if ((configure_phy_mask & (1 << index)) == 0)
diff --git a/drivers/scsi/isci/registers.h b/drivers/scsi/isci/registers.h
index 00afc738bbed..eaa541afc755 100644
--- a/drivers/scsi/isci/registers.h
+++ b/drivers/scsi/isci/registers.h
@@ -875,122 +875,6 @@ struct scu_iit_entry {
 #define SCU_PTSxSR_GEN_BIT(name) \
 	SCU_GEN_BIT(SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ ## name)
 
-
-/*
- * *****************************************************************************
- * * SGPIO Register shift and mask values
- * ***************************************************************************** */
-#define SCU_SGPIO_CONTROL_SGPIO_ENABLE_SHIFT                    (0)
-#define SCU_SGPIO_CONTROL_SGPIO_ENABLE_MASK                     (0x00000001)
-#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_CLOCK_SELECT_SHIFT       (1)
-#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_CLOCK_SELECT_MASK        (0x00000002)
-#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_SHIFT_WIDTH_SELECT_SHIFT (2)
-#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_SHIFT_WIDTH_SELECT_MASK  (0x00000004)
-#define SCU_SGPIO_CONTROL_SGPIO_TEST_BIT_SHIFT                  (15)
-#define SCU_SGPIO_CONTROL_SGPIO_TEST_BIT_MASK                   (0x00008000)
-#define SCU_SGPIO_CONTROL_SGPIO_RESERVED_MASK                   (0xFFFF7FF8)
-
-#define SCU_SGICRx_GEN_BIT(name) \
-	SCU_GEN_BIT(SCU_SGPIO_CONTROL_SGPIO_ ## name)
-
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R0_SHIFT      (0)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R0_MASK       (0x0000000F)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R1_SHIFT      (4)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R1_MASK       (0x000000F0)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R2_SHIFT      (8)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R2_MASK       (0x00000F00)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R3_SHIFT      (12)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R3_MASK       (0x0000F000)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_RESERVED_MASK (0xFFFF0000)
-
-#define SCU_SGPBRx_GEN_VAL(name, value)	\
-	SCU_GEN_VALUE(SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_ ## name, value)
-
-#define SCU_SGPIO_START_DRIVE_LOWER_R0_SHIFT        (0)
-#define SCU_SGPIO_START_DRIVE_LOWER_R0_MASK         (0x00000003)
-#define SCU_SGPIO_START_DRIVE_LOWER_R1_SHIFT        (4)
-#define SCU_SGPIO_START_DRIVE_LOWER_R1_MASK         (0x00000030)
-#define SCU_SGPIO_START_DRIVE_LOWER_R2_SHIFT        (8)
-#define SCU_SGPIO_START_DRIVE_LOWER_R2_MASK         (0x00000300)
-#define SCU_SGPIO_START_DRIVE_LOWER_R3_SHIFT        (12)
-#define SCU_SGPIO_START_DRIVE_LOWER_R3_MASK         (0x00003000)
-#define SCU_SGPIO_START_DRIVE_LOWER_RESERVED_MASK   (0xFFFF8888)
-
-#define SCU_SGSDLRx_GEN_VAL(name, value) \
-	SCU_GEN_VALUE(SCU_SGPIO_START_DRIVE_LOWER_ ## name, value)
-
-#define SCU_SGPIO_START_DRIVE_UPPER_R0_SHIFT        (0)
-#define SCU_SGPIO_START_DRIVE_UPPER_R0_MASK         (0x00000003)
-#define SCU_SGPIO_START_DRIVE_UPPER_R1_SHIFT        (4)
-#define SCU_SGPIO_START_DRIVE_UPPER_R1_MASK         (0x00000030)
-#define SCU_SGPIO_START_DRIVE_UPPER_R2_SHIFT        (8)
-#define SCU_SGPIO_START_DRIVE_UPPER_R2_MASK         (0x00000300)
-#define SCU_SGPIO_START_DRIVE_UPPER_R3_SHIFT        (12)
-#define SCU_SGPIO_START_DRIVE_UPPER_R3_MASK         (0x00003000)
-#define SCU_SGPIO_START_DRIVE_UPPER_RESERVED_MASK   (0xFFFF8888)
-
-#define SCU_SGSDURx_GEN_VAL(name, value) \
-	SCU_GEN_VALUE(SCU_SGPIO_START_DRIVE_LOWER_ ## name, value)
-
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D0_SHIFT      (0)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D0_MASK       (0x00000003)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D1_SHIFT      (4)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D1_MASK       (0x00000030)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D2_SHIFT      (8)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D2_MASK       (0x00000300)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D3_SHIFT      (12)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D3_MASK       (0x00003000)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_RESERVED_MASK (0xFFFF8888)
-
-#define SCU_SGSIDLRx_GEN_VAL(name, value) \
-	SCU_GEN_VALUE(SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_ ## name, value)
-
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D0_SHIFT      (0)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D0_MASK       (0x00000003)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D1_SHIFT      (4)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D1_MASK       (0x00000030)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D2_SHIFT      (8)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D2_MASK       (0x00000300)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D3_SHIFT      (12)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D3_MASK       (0x00003000)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_RESERVED_MASK (0xFFFF8888)
-
-#define SCU_SGSIDURx_GEN_VAL(name, value) \
-	SCU_GEN_VALUE(SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_ ## name, value)
-
-#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_SHIFT            (0)
-#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_MASK             (0x0000000F)
-#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_RESERVED_MASK    (0xFFFFFFF0)
-
-#define SCU_SGVSCR_GEN_VAL(value) \
-	SCU_GEN_VALUE(SCU_SGPIO_VENDOR_SPECIFIC_CODE ## name, value)
-
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA0_SHIFT           (0)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA0_MASK            (0x00000003)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA0_SHIFT    (2)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA0_MASK     (0x00000004)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA0_SHIFT      (3)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA0_MASK       (0x00000008)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA1_SHIFT           (4)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA1_MASK            (0x00000030)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA1_SHIFT    (6)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA1_MASK     (0x00000040)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA1_SHIFT      (7)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA1_MASK       (0x00000080)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA2_SHIFT           (8)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA2_MASK            (0x00000300)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA2_SHIFT    (10)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA2_MASK     (0x00000400)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA2_SHIFT      (11)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA2_MASK       (0x00000800)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_RESERVED_MASK               (0xFFFFF000)
-
-#define SCU_SGODSR_GEN_VAL(name, value)	\
-	SCU_GEN_VALUE(SCU_SGPIO_OUPUT_DATA_SELECT_ ## name, value)
-
-#define SCU_SGODSR_GEN_BIT(name) \
-	SCU_GEN_BIT(SCU_SGPIO_OUPUT_DATA_SELECT_ ## name)
-
 /*
  * *****************************************************************************
  * * SMU Registers
@@ -1529,10 +1413,12 @@ struct scu_sgpio_registers {
 	u32 serial_input_upper;
 /* 0x0018 SGPIO_SGVSCR */
 	u32 vendor_specific_code;
+/* 0x001C Reserved */
+	u32 reserved_001c;
 /* 0x0020 SGPIO_SGODSR */
-	u32 ouput_data_select[8];
+	u32 output_data_select[8];
 /* Remainder of memory space 256 bytes */
-	u32 reserved_1444_14ff[0x31];
+	u32 reserved_1444_14ff[0x30];
 
 };
 
diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c
index b6e6368c2665..fbf9ce28c3f5 100644
--- a/drivers/scsi/isci/remote_device.c
+++ b/drivers/scsi/isci/remote_device.c
@@ -386,6 +386,18 @@ static bool is_remote_device_ready(struct isci_remote_device *idev)
 	}
 }
 
+/*
+ * called once the remote node context has transisitioned to a ready
+ * state (after suspending RX and/or TX due to early D2H fis)
+ */
+static void atapi_remote_device_resume_done(void *_dev)
+{
+	struct isci_remote_device *idev = _dev;
+	struct isci_request *ireq = idev->working_request;
+
+	sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+}
+
 enum sci_status sci_remote_device_event_handler(struct isci_remote_device *idev,
 						     u32 event_code)
 {
@@ -432,6 +444,16 @@ enum sci_status sci_remote_device_event_handler(struct isci_remote_device *idev,
 	if (status != SCI_SUCCESS)
 		return status;
 
+	if (state == SCI_STP_DEV_ATAPI_ERROR) {
+		/* For ATAPI error state resume the RNC right away. */
+		if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX ||
+		    scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) {
+			return sci_remote_node_context_resume(&idev->rnc,
+							      atapi_remote_device_resume_done,
+							      idev);
+		}
+	}
+
 	if (state == SCI_STP_DEV_IDLE) {
 
 		/* We pick up suspension events to handle specifically to this
@@ -625,6 +647,7 @@ enum sci_status sci_remote_device_complete_io(struct isci_host *ihost,
 	case SCI_STP_DEV_CMD:
 	case SCI_STP_DEV_NCQ:
 	case SCI_STP_DEV_NCQ_ERROR:
+	case SCI_STP_DEV_ATAPI_ERROR:
 		status = common_complete_io(iport, idev, ireq);
 		if (status != SCI_SUCCESS)
 			break;
@@ -1020,6 +1043,7 @@ static const struct sci_base_state sci_remote_device_state_table[] = {
 	[SCI_STP_DEV_NCQ_ERROR] = {
 		.enter_state = sci_stp_remote_device_ready_ncq_error_substate_enter,
 	},
+	[SCI_STP_DEV_ATAPI_ERROR] = { },
 	[SCI_STP_DEV_AWAIT_RESET] = { },
 	[SCI_SMP_DEV_IDLE] = {
 		.enter_state = sci_smp_remote_device_ready_idle_substate_enter,
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 57ccfc3d6ad3..e1747ea0d0ea 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -244,6 +244,15 @@ enum sci_remote_device_states {
 	SCI_STP_DEV_NCQ_ERROR,
 
 	/**
+	 * This is the ATAPI error state for the STP ATAPI remote device.
+	 * This state is entered when ATAPI device sends error status FIS
+	 * without data while the device object is in CMD state.
+	 * A suspension event is expected in this state.
+	 * The device object will resume right away.
+	 */
+	SCI_STP_DEV_ATAPI_ERROR,
+
+	/**
 	 * This is the READY substate indicates the device is waiting for the RESET task
 	 * coming to be recovered from certain hardware specific error.
 	 */
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index b5d3a8c4d329..565a9f0a9bc2 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -481,7 +481,29 @@ static void sci_stp_optimized_request_construct(struct isci_request *ireq,
 	}
 }
 
+static void sci_atapi_construct(struct isci_request *ireq)
+{
+	struct host_to_dev_fis *h2d_fis = &ireq->stp.cmd;
+	struct sas_task *task;
+
+	/* To simplify the implementation we take advantage of the
+	 * silicon's partial acceleration of atapi protocol (dma data
+	 * transfers), so we promote all commands to dma protocol.  This
+	 * breaks compatibility with ATA_HORKAGE_ATAPI_MOD16_DMA drives.
+	 */
+	h2d_fis->features |= ATAPI_PKT_DMA;
 
+	scu_stp_raw_request_construct_task_context(ireq);
+
+	task = isci_request_access_task(ireq);
+	if (task->data_dir == DMA_NONE)
+		task->total_xfer_len = 0;
+
+	/* clear the response so we can detect arrivial of an
+	 * unsolicited h2d fis
+	 */
+	ireq->stp.rsp.fis_type = 0;
+}
 
 static enum sci_status
 sci_io_request_construct_sata(struct isci_request *ireq,
@@ -491,6 +513,7 @@ sci_io_request_construct_sata(struct isci_request *ireq,
 {
 	enum sci_status status = SCI_SUCCESS;
 	struct sas_task *task = isci_request_access_task(ireq);
+	struct domain_device *dev = ireq->target_device->domain_dev;
 
 	/* check for management protocols */
 	if (ireq->ttype == tmf_task) {
@@ -519,6 +542,13 @@ sci_io_request_construct_sata(struct isci_request *ireq,
 
 	}
 
+	/* ATAPI */
+	if (dev->sata_dev.command_set == ATAPI_COMMAND_SET &&
+	    task->ata_task.fis.command == ATA_CMD_PACKET) {
+		sci_atapi_construct(ireq);
+		return SCI_SUCCESS;
+	}
+
 	/* non data */
 	if (task->data_dir == DMA_NONE) {
 		scu_stp_raw_request_construct_task_context(ireq);
@@ -627,7 +657,7 @@ enum sci_status sci_task_request_construct_sata(struct isci_request *ireq)
 
 /**
  * sci_req_tx_bytes - bytes transferred when reply underruns request
- * @sci_req: request that was terminated early
+ * @ireq: request that was terminated early
  */
 #define SCU_TASK_CONTEXT_SRAM 0x200000
 static u32 sci_req_tx_bytes(struct isci_request *ireq)
@@ -729,6 +759,10 @@ sci_io_request_terminate(struct isci_request *ireq)
 	case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED:
 	case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG:
 	case SCI_REQ_STP_SOFT_RESET_WAIT_D2H:
+	case SCI_REQ_ATAPI_WAIT_H2D:
+	case SCI_REQ_ATAPI_WAIT_PIO_SETUP:
+	case SCI_REQ_ATAPI_WAIT_D2H:
+	case SCI_REQ_ATAPI_WAIT_TC_COMP:
 		sci_change_state(&ireq->sm, SCI_REQ_ABORTING);
 		return SCI_SUCCESS;
 	case SCI_REQ_TASK_WAIT_TC_RESP:
@@ -1194,8 +1228,8 @@ static enum sci_status sci_stp_request_pio_data_out_transmit_data(struct isci_re
 {
 	struct isci_stp_request *stp_req = &ireq->stp.req;
 	struct scu_sgl_element_pair *sgl_pair;
+	enum sci_status status = SCI_SUCCESS;
 	struct scu_sgl_element *sgl;
-	enum sci_status status;
 	u32 offset;
 	u32 len = 0;
 
@@ -1249,7 +1283,7 @@ static enum sci_status sci_stp_request_pio_data_out_transmit_data(struct isci_re
  */
 static enum sci_status
 sci_stp_request_pio_data_in_copy_data_buffer(struct isci_stp_request *stp_req,
-						  u8 *data_buf, u32 len)
+					     u8 *data_buf, u32 len)
 {
 	struct isci_request *ireq;
 	u8 *src_addr;
@@ -1423,6 +1457,128 @@ static enum sci_status sci_stp_request_udma_general_frame_handler(struct isci_re
 	return status;
 }
 
+static enum sci_status process_unsolicited_fis(struct isci_request *ireq,
+					       u32 frame_index)
+{
+	struct isci_host *ihost = ireq->owning_controller;
+	enum sci_status status;
+	struct dev_to_host_fis *frame_header;
+	u32 *frame_buffer;
+
+	status = sci_unsolicited_frame_control_get_header(&ihost->uf_control,
+							  frame_index,
+							  (void **)&frame_header);
+
+	if (status != SCI_SUCCESS)
+		return status;
+
+	if (frame_header->fis_type != FIS_REGD2H) {
+		dev_err(&ireq->isci_host->pdev->dev,
+			"%s ERROR: invalid fis type 0x%X\n",
+			__func__, frame_header->fis_type);
+		return SCI_FAILURE;
+	}
+
+	sci_unsolicited_frame_control_get_buffer(&ihost->uf_control,
+						 frame_index,
+						 (void **)&frame_buffer);
+
+	sci_controller_copy_sata_response(&ireq->stp.rsp,
+					  (u32 *)frame_header,
+					  frame_buffer);
+
+	/* Frame has been decoded return it to the controller */
+	sci_controller_release_frame(ihost, frame_index);
+
+	return status;
+}
+
+static enum sci_status atapi_d2h_reg_frame_handler(struct isci_request *ireq,
+						   u32 frame_index)
+{
+	struct sas_task *task = isci_request_access_task(ireq);
+	enum sci_status status;
+
+	status = process_unsolicited_fis(ireq, frame_index);
+
+	if (status == SCI_SUCCESS) {
+		if (ireq->stp.rsp.status & ATA_ERR)
+			status = SCI_IO_FAILURE_RESPONSE_VALID;
+	} else {
+		status = SCI_IO_FAILURE_RESPONSE_VALID;
+	}
+
+	if (status != SCI_SUCCESS) {
+		ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE;
+		ireq->sci_status = status;
+	} else {
+		ireq->scu_status = SCU_TASK_DONE_GOOD;
+		ireq->sci_status = SCI_SUCCESS;
+	}
+
+	/* the d2h ufi is the end of non-data commands */
+	if (task->data_dir == DMA_NONE)
+		sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+
+	return status;
+}
+
+static void scu_atapi_reconstruct_raw_frame_task_context(struct isci_request *ireq)
+{
+	struct ata_device *dev = sas_to_ata_dev(ireq->target_device->domain_dev);
+	void *atapi_cdb = ireq->ttype_ptr.io_task_ptr->ata_task.atapi_packet;
+	struct scu_task_context *task_context = ireq->tc;
+
+	/* fill in the SCU Task Context for a DATA fis containing CDB in Raw Frame
+	 * type. The TC for previous Packet fis was already there, we only need to
+	 * change the H2D fis content.
+	 */
+	memset(&ireq->stp.cmd, 0, sizeof(struct host_to_dev_fis));
+	memcpy(((u8 *)&ireq->stp.cmd + sizeof(u32)), atapi_cdb, ATAPI_CDB_LEN);
+	memset(&(task_context->type.stp), 0, sizeof(struct stp_task_context));
+	task_context->type.stp.fis_type = FIS_DATA;
+	task_context->transfer_length_bytes = dev->cdb_len;
+}
+
+static void scu_atapi_construct_task_context(struct isci_request *ireq)
+{
+	struct ata_device *dev = sas_to_ata_dev(ireq->target_device->domain_dev);
+	struct sas_task *task = isci_request_access_task(ireq);
+	struct scu_task_context *task_context = ireq->tc;
+	int cdb_len = dev->cdb_len;
+
+	/* reference: SSTL 1.13.4.2
+	 * task_type, sata_direction
+	 */
+	if (task->data_dir == DMA_TO_DEVICE) {
+		task_context->task_type = SCU_TASK_TYPE_PACKET_DMA_OUT;
+		task_context->sata_direction = 0;
+	} else {
+		/* todo: for NO_DATA command, we need to send out raw frame. */
+		task_context->task_type = SCU_TASK_TYPE_PACKET_DMA_IN;
+		task_context->sata_direction = 1;
+	}
+
+	memset(&task_context->type.stp, 0, sizeof(task_context->type.stp));
+	task_context->type.stp.fis_type = FIS_DATA;
+
+	memset(&ireq->stp.cmd, 0, sizeof(ireq->stp.cmd));
+	memcpy(&ireq->stp.cmd.lbal, task->ata_task.atapi_packet, cdb_len);
+	task_context->ssp_command_iu_length = cdb_len / sizeof(u32);
+
+	/* task phase is set to TX_CMD */
+	task_context->task_phase = 0x1;
+
+	/* retry counter */
+	task_context->stp_retry_count = 0;
+
+	/* data transfer size. */
+	task_context->transfer_length_bytes = task->total_xfer_len;
+
+	/* setup sgl */
+	sci_request_build_sgl(ireq);
+}
+
 enum sci_status
 sci_io_request_frame_handler(struct isci_request *ireq,
 				  u32 frame_index)
@@ -1490,29 +1646,30 @@ sci_io_request_frame_handler(struct isci_request *ireq,
 		return SCI_SUCCESS;
 
 	case SCI_REQ_SMP_WAIT_RESP: {
-		struct smp_resp *rsp_hdr = &ireq->smp.rsp;
-		void *frame_header;
+		struct sas_task *task = isci_request_access_task(ireq);
+		struct scatterlist *sg = &task->smp_task.smp_resp;
+		void *frame_header, *kaddr;
+		u8 *rsp;
 
 		sci_unsolicited_frame_control_get_header(&ihost->uf_control,
-							      frame_index,
-							      &frame_header);
-
-		/* byte swap the header. */
-		word_cnt = SMP_RESP_HDR_SZ / sizeof(u32);
-		sci_swab32_cpy(rsp_hdr, frame_header, word_cnt);
+							 frame_index,
+							 &frame_header);
+		kaddr = kmap_atomic(sg_page(sg), KM_IRQ0);
+		rsp = kaddr + sg->offset;
+		sci_swab32_cpy(rsp, frame_header, 1);
 
-		if (rsp_hdr->frame_type == SMP_RESPONSE) {
+		if (rsp[0] == SMP_RESPONSE) {
 			void *smp_resp;
 
 			sci_unsolicited_frame_control_get_buffer(&ihost->uf_control,
-								      frame_index,
-								      &smp_resp);
-
-			word_cnt = (sizeof(struct smp_resp) - SMP_RESP_HDR_SZ) /
-				sizeof(u32);
+								 frame_index,
+								 &smp_resp);
 
-			sci_swab32_cpy(((u8 *) rsp_hdr) + SMP_RESP_HDR_SZ,
-				       smp_resp, word_cnt);
+			word_cnt = (sg->length/4)-1;
+			if (word_cnt > 0)
+				word_cnt = min_t(unsigned int, word_cnt,
+						 SCU_UNSOLICITED_FRAME_BUFFER_SIZE/4);
+			sci_swab32_cpy(rsp + 4, smp_resp, word_cnt);
 
 			ireq->scu_status = SCU_TASK_DONE_GOOD;
 			ireq->sci_status = SCI_SUCCESS;
@@ -1528,12 +1685,13 @@ sci_io_request_frame_handler(struct isci_request *ireq,
 				__func__,
 				ireq,
 				frame_index,
-				rsp_hdr->frame_type);
+				rsp[0]);
 
 			ireq->scu_status = SCU_TASK_DONE_SMP_FRM_TYPE_ERR;
 			ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR;
 			sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
 		}
+		kunmap_atomic(kaddr, KM_IRQ0);
 
 		sci_controller_release_frame(ihost, frame_index);
 
@@ -1833,6 +1991,24 @@ sci_io_request_frame_handler(struct isci_request *ireq,
 
 		return status;
 	}
+	case SCI_REQ_ATAPI_WAIT_PIO_SETUP: {
+		struct sas_task *task = isci_request_access_task(ireq);
+
+		sci_controller_release_frame(ihost, frame_index);
+		ireq->target_device->working_request = ireq;
+		if (task->data_dir == DMA_NONE) {
+			sci_change_state(&ireq->sm, SCI_REQ_ATAPI_WAIT_TC_COMP);
+			scu_atapi_reconstruct_raw_frame_task_context(ireq);
+		} else {
+			sci_change_state(&ireq->sm, SCI_REQ_ATAPI_WAIT_D2H);
+			scu_atapi_construct_task_context(ireq);
+		}
+
+		sci_controller_continue_io(ireq);
+		return SCI_SUCCESS;
+	}
+	case SCI_REQ_ATAPI_WAIT_D2H:
+		return atapi_d2h_reg_frame_handler(ireq, frame_index);
 	case SCI_REQ_ABORTING:
 		/*
 		 * TODO: Is it even possible to get an unsolicited frame in the
@@ -1898,10 +2074,9 @@ static enum sci_status stp_request_udma_await_tc_event(struct isci_request *ireq
 	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR):
 	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR):
 	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CMD_LL_R_ERR):
-	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR):
 		sci_remote_device_suspend(ireq->target_device,
 			SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code)));
-	/* Fall through to the default case */
+		/* Fall through to the default case */
 	default:
 		/* All other completion status cause the IO to be complete. */
 		ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code);
@@ -1964,6 +2139,112 @@ stp_request_soft_reset_await_h2d_diagnostic_tc_event(struct isci_request *ireq,
 	return SCI_SUCCESS;
 }
 
+static enum sci_status atapi_raw_completion(struct isci_request *ireq, u32 completion_code,
+						  enum sci_base_request_states next)
+{
+	enum sci_status status = SCI_SUCCESS;
+
+	switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
+	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
+		ireq->scu_status = SCU_TASK_DONE_GOOD;
+		ireq->sci_status = SCI_SUCCESS;
+		sci_change_state(&ireq->sm, next);
+		break;
+	default:
+		/* All other completion status cause the IO to be complete.
+		 * If a NAK was received, then it is up to the user to retry
+		 * the request.
+		 */
+		ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code);
+		ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR;
+
+		sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+		break;
+	}
+
+	return status;
+}
+
+static enum sci_status atapi_data_tc_completion_handler(struct isci_request *ireq,
+							u32 completion_code)
+{
+	struct isci_remote_device *idev = ireq->target_device;
+	struct dev_to_host_fis *d2h = &ireq->stp.rsp;
+	enum sci_status status = SCI_SUCCESS;
+
+	switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
+	case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT):
+		sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+		break;
+
+	case (SCU_TASK_DONE_UNEXP_FIS << SCU_COMPLETION_TL_STATUS_SHIFT): {
+		u16 len = sci_req_tx_bytes(ireq);
+
+		/* likely non-error data underrrun, workaround missing
+		 * d2h frame from the controller
+		 */
+		if (d2h->fis_type != FIS_REGD2H) {
+			d2h->fis_type = FIS_REGD2H;
+			d2h->flags = (1 << 6);
+			d2h->status = 0x50;
+			d2h->error = 0;
+			d2h->lbal = 0;
+			d2h->byte_count_low = len & 0xff;
+			d2h->byte_count_high = len >> 8;
+			d2h->device = 0xa0;
+			d2h->lbal_exp = 0;
+			d2h->lbam_exp = 0;
+			d2h->lbah_exp = 0;
+			d2h->_r_a = 0;
+			d2h->sector_count = 0x3;
+			d2h->sector_count_exp = 0;
+			d2h->_r_b = 0;
+			d2h->_r_c = 0;
+			d2h->_r_d = 0;
+		}
+
+		ireq->scu_status = SCU_TASK_DONE_GOOD;
+		ireq->sci_status = SCI_SUCCESS_IO_DONE_EARLY;
+		status = ireq->sci_status;
+
+		/* the hw will have suspended the rnc, so complete the
+		 * request upon pending resume
+		 */
+		sci_change_state(&idev->sm, SCI_STP_DEV_ATAPI_ERROR);
+		break;
+	}
+	case (SCU_TASK_DONE_EXCESS_DATA << SCU_COMPLETION_TL_STATUS_SHIFT):
+		/* In this case, there is no UF coming after.
+		 * compelte the IO now.
+		 */
+		ireq->scu_status = SCU_TASK_DONE_GOOD;
+		ireq->sci_status = SCI_SUCCESS;
+		sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+		break;
+
+	default:
+		if (d2h->fis_type == FIS_REGD2H) {
+			/* UF received change the device state to ATAPI_ERROR */
+			status = ireq->sci_status;
+			sci_change_state(&idev->sm, SCI_STP_DEV_ATAPI_ERROR);
+		} else {
+			/* If receiving any non-sucess TC status, no UF
+			 * received yet, then an UF for the status fis
+			 * is coming after (XXX: suspect this is
+			 * actually a protocol error or a bug like the
+			 * DONE_UNEXP_FIS case)
+			 */
+			ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE;
+			ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID;
+
+			sci_change_state(&ireq->sm, SCI_REQ_ATAPI_WAIT_D2H);
+		}
+		break;
+	}
+
+	return status;
+}
+
 enum sci_status
 sci_io_request_tc_completion(struct isci_request *ireq,
 				  u32 completion_code)
@@ -2015,6 +2296,17 @@ sci_io_request_tc_completion(struct isci_request *ireq,
 		return request_aborting_state_tc_event(ireq,
 						       completion_code);
 
+	case SCI_REQ_ATAPI_WAIT_H2D:
+		return atapi_raw_completion(ireq, completion_code,
+					    SCI_REQ_ATAPI_WAIT_PIO_SETUP);
+
+	case SCI_REQ_ATAPI_WAIT_TC_COMP:
+		return atapi_raw_completion(ireq, completion_code,
+					    SCI_REQ_ATAPI_WAIT_D2H);
+
+	case SCI_REQ_ATAPI_WAIT_D2H:
+		return atapi_data_tc_completion_handler(ireq, completion_code);
+
 	default:
 		dev_warn(&ihost->pdev->dev,
 			 "%s: SCIC IO Request given task completion "
@@ -2421,6 +2713,8 @@ static void isci_process_stp_response(struct sas_task *task, struct dev_to_host_
 	 */
 	if (fis->status & ATA_DF)
 		ts->stat = SAS_PROTO_RESPONSE;
+	else if (fis->status & ATA_ERR)
+		ts->stat = SAM_STAT_CHECK_CONDITION;
 	else
 		ts->stat = SAM_STAT_GOOD;
 
@@ -2603,18 +2897,7 @@ static void isci_request_io_request_complete(struct isci_host *ihost,
 			status   = SAM_STAT_GOOD;
 			set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
 
-			if (task->task_proto == SAS_PROTOCOL_SMP) {
-				void *rsp = &request->smp.rsp;
-
-				dev_dbg(&ihost->pdev->dev,
-					"%s: SMP protocol completion\n",
-					__func__);
-
-				sg_copy_from_buffer(
-					&task->smp_task.smp_resp, 1,
-					rsp, sizeof(struct smp_resp));
-			} else if (completion_status
-				   == SCI_IO_SUCCESS_IO_DONE_EARLY) {
+			if (completion_status == SCI_IO_SUCCESS_IO_DONE_EARLY) {
 
 				/* This was an SSP / STP / SATA transfer.
 				 * There is a possibility that less data than
@@ -2791,6 +3074,7 @@ static void sci_request_started_state_enter(struct sci_base_state_machine *sm)
 {
 	struct isci_request *ireq = container_of(sm, typeof(*ireq), sm);
 	struct domain_device *dev = ireq->target_device->domain_dev;
+	enum sci_base_request_states state;
 	struct sas_task *task;
 
 	/* XXX as hch said always creating an internal sas_task for tmf
@@ -2802,26 +3086,30 @@ static void sci_request_started_state_enter(struct sci_base_state_machine *sm)
 	 * substates
 	 */
 	if (!task && dev->dev_type == SAS_END_DEV) {
-		sci_change_state(sm, SCI_REQ_TASK_WAIT_TC_COMP);
+		state = SCI_REQ_TASK_WAIT_TC_COMP;
 	} else if (!task &&
 		   (isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_high ||
 		    isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_low)) {
-		sci_change_state(sm, SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED);
+		state = SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED;
 	} else if (task && task->task_proto == SAS_PROTOCOL_SMP) {
-		sci_change_state(sm, SCI_REQ_SMP_WAIT_RESP);
+		state = SCI_REQ_SMP_WAIT_RESP;
 	} else if (task && sas_protocol_ata(task->task_proto) &&
 		   !task->ata_task.use_ncq) {
-		u32 state;
-
-		if (task->data_dir == DMA_NONE)
+		if (dev->sata_dev.command_set == ATAPI_COMMAND_SET &&
+			task->ata_task.fis.command == ATA_CMD_PACKET) {
+			state = SCI_REQ_ATAPI_WAIT_H2D;
+		} else if (task->data_dir == DMA_NONE) {
 			state = SCI_REQ_STP_NON_DATA_WAIT_H2D;
-		else if (task->ata_task.dma_xfer)
+		} else if (task->ata_task.dma_xfer) {
 			state = SCI_REQ_STP_UDMA_WAIT_TC_COMP;
-		else /* PIO */
+		} else /* PIO */ {
 			state = SCI_REQ_STP_PIO_WAIT_H2D;
-
-		sci_change_state(sm, state);
+		}
+	} else {
+		/* SSP or NCQ are fully accelerated, no substates */
+		return;
 	}
+	sci_change_state(sm, state);
 }
 
 static void sci_request_completed_state_enter(struct sci_base_state_machine *sm)
@@ -2913,6 +3201,10 @@ static const struct sci_base_state sci_request_state_table[] = {
 	[SCI_REQ_TASK_WAIT_TC_RESP] = { },
 	[SCI_REQ_SMP_WAIT_RESP] = { },
 	[SCI_REQ_SMP_WAIT_TC_COMP] = { },
+	[SCI_REQ_ATAPI_WAIT_H2D] = { },
+	[SCI_REQ_ATAPI_WAIT_PIO_SETUP] = { },
+	[SCI_REQ_ATAPI_WAIT_D2H] = { },
+	[SCI_REQ_ATAPI_WAIT_TC_COMP] = { },
 	[SCI_REQ_COMPLETED] = {
 		.enter_state = sci_request_completed_state_enter,
 	},
diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h
index 7a1d5a9778eb..f720b97b7bb5 100644
--- a/drivers/scsi/isci/request.h
+++ b/drivers/scsi/isci/request.h
@@ -96,7 +96,6 @@ enum sci_request_protocol {
  *	     to wait for another fis or if the transfer is complete.  Upon
  *           receipt of a d2h fis this will be the status field of that fis.
  * @sgl - track pio transfer progress as we iterate through the sgl
- * @device_cdb_len - atapi device advertises it's transfer constraints at setup
  */
 struct isci_stp_request {
 	u32 pio_len;
@@ -107,7 +106,6 @@ struct isci_stp_request {
 		u8 set;
 		u32 offset;
 	} sgl;
-	u32 device_cdb_len;
 };
 
 struct isci_request {
@@ -174,9 +172,6 @@ struct isci_request {
 			};
 		} ssp;
 		struct {
-			struct smp_resp rsp;
-		} smp;
-		struct {
 			struct isci_stp_request req;
 			struct host_to_dev_fis cmd;
 			struct dev_to_host_fis rsp;
@@ -252,6 +247,32 @@ enum sci_base_request_states {
 	SCI_REQ_STP_PIO_DATA_OUT,
 
 	/*
+	 * While in this state the IO request object is waiting for the TC
+	 * completion notification for the H2D Register FIS
+	 */
+	SCI_REQ_ATAPI_WAIT_H2D,
+
+	/*
+	 * While in this state the IO request object is waiting for either a
+	 * PIO Setup.
+	 */
+	SCI_REQ_ATAPI_WAIT_PIO_SETUP,
+
+	/*
+	 * The non-data IO transit to this state in this state after receiving
+	 * TC completion. While in this state IO request object is waiting for
+	 * D2H status frame as UF.
+	 */
+	SCI_REQ_ATAPI_WAIT_D2H,
+
+	/*
+	 * When transmitting raw frames hardware reports task context completion
+	 * after every frame submission, so in the non-accelerated case we need
+	 * to expect the completion for the "cdb" frame.
+	 */
+	SCI_REQ_ATAPI_WAIT_TC_COMP,
+
+	/*
 	 * The AWAIT_TC_COMPLETION sub-state indicates that the started raw
 	 * task management request is waiting for the transmission of the
 	 * initial frame (i.e. command, task, etc.).
diff --git a/drivers/scsi/isci/sas.h b/drivers/scsi/isci/sas.h
index 462b15174d3f..dc26b4aea99e 100644
--- a/drivers/scsi/isci/sas.h
+++ b/drivers/scsi/isci/sas.h
@@ -204,8 +204,6 @@ struct smp_req {
 	u8 req_data[0];
 }  __packed;
 
-#define SMP_RESP_HDR_SZ	4
-
 /*
  * struct sci_sas_address - This structure depicts how a SAS address is
  *    represented by SCI.
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index d6bcdd013dc9..e2d9418683ce 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -1345,29 +1345,6 @@ static void isci_smp_task_done(struct sas_task *task)
 	complete(&task->completion);
 }
 
-static struct sas_task *isci_alloc_task(void)
-{
-	struct sas_task *task = kzalloc(sizeof(*task), GFP_KERNEL);
-
-	if (task) {
-		INIT_LIST_HEAD(&task->list);
-		spin_lock_init(&task->task_state_lock);
-		task->task_state_flags = SAS_TASK_STATE_PENDING;
-		init_timer(&task->timer);
-		init_completion(&task->completion);
-	}
-
-	return task;
-}
-
-static void isci_free_task(struct isci_host *ihost, struct sas_task  *task)
-{
-	if (task) {
-		BUG_ON(!list_empty(&task->list));
-		kfree(task);
-	}
-}
-
 static int isci_smp_execute_task(struct isci_host *ihost,
 				 struct domain_device *dev, void *req,
 				 int req_size, void *resp, int resp_size)
@@ -1376,7 +1353,7 @@ static int isci_smp_execute_task(struct isci_host *ihost,
 	struct sas_task *task = NULL;
 
 	for (retry = 0; retry < 3; retry++) {
-		task = isci_alloc_task();
+		task = sas_alloc_task(GFP_KERNEL);
 		if (!task)
 			return -ENOMEM;
 
@@ -1439,13 +1416,13 @@ static int isci_smp_execute_task(struct isci_host *ihost,
 				SAS_ADDR(dev->sas_addr),
 				task->task_status.resp,
 				task->task_status.stat);
-			isci_free_task(ihost, task);
+			sas_free_task(task);
 			task = NULL;
 		}
 	}
 ex_err:
 	BUG_ON(retry == 3 && task != NULL);
-	isci_free_task(ihost, task);
+	sas_free_task(task);
 	return res;
 }
 
diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h
index 4a7fa90287ef..15b18d158993 100644
--- a/drivers/scsi/isci/task.h
+++ b/drivers/scsi/isci/task.h
@@ -286,6 +286,25 @@ isci_task_set_completion_status(
 	task->task_status.resp = response;
 	task->task_status.stat = status;
 
+	switch (task->task_proto) {
+
+	case SAS_PROTOCOL_SATA:
+	case SAS_PROTOCOL_STP:
+	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+
+		if (task_notification_selection
+		    == isci_perform_error_io_completion) {
+			/* SATA/STP I/O has it's own means of scheduling device
+			* error handling on the normal path.
+			*/
+			task_notification_selection
+				= isci_perform_normal_io_completion;
+		}
+		break;
+	default:
+		break;
+	}
+
 	switch (task_notification_selection) {
 
 	case isci_perform_error_io_completion: