[SCSI] bnx2fc: Support 'sequence cleanup' task

For the devices that support sequence level error recovery, based on the REC
response, the firmware has to be informed about the offset from which the
retransmission should happen. Driver initiates sequence cleanup task to
firmware so that the firmware can program the task. Upon the sequence cleanup
completion, SRR is issued to retransmit the sequence.

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

1 files changed, 97 insertions, 0 deletions

diff --git a/drivers/scsi/bnx2fc/bnx2fc_hwi.c b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
index fa263b5902e1..03ae003d3b85 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_hwi.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
@@ -880,6 +880,13 @@ void bnx2fc_process_cq_compl(struct bnx2fc_rport *tgt, u16 wqe)
 		kref_put(&io_req->refcount, bnx2fc_cmd_release);
 		break;
 
+	case BNX2FC_SEQ_CLEANUP:
+		BNX2FC_IO_DBG(io_req, "cq_compl(0x%x) - seq cleanup resp\n",
+			      io_req->xid);
+		bnx2fc_process_seq_cleanup_compl(io_req, task, rx_state);
+		kref_put(&io_req->refcount, bnx2fc_cmd_release);
+		break;
+
 	default:
 		printk(KERN_ERR PFX "Invalid cmd_type %d\n", cmd_type);
 		break;
@@ -1369,6 +1376,96 @@ void bnx2fc_return_rqe(struct bnx2fc_rport *tgt, u8 num_items)
 	tgt->conn_db->rq_prod = tgt->rq_prod_idx;
 }
 
+void bnx2fc_init_seq_cleanup_task(struct bnx2fc_cmd *seq_clnp_req,
+				  struct fcoe_task_ctx_entry *task,
+				  struct bnx2fc_cmd *orig_io_req,
+				  u32 offset)
+{
+	struct scsi_cmnd *sc_cmd = orig_io_req->sc_cmd;
+	struct bnx2fc_rport *tgt = seq_clnp_req->tgt;
+	struct bnx2fc_interface *interface = tgt->port->priv;
+	struct fcoe_bd_ctx *bd = orig_io_req->bd_tbl->bd_tbl;
+	struct fcoe_task_ctx_entry *orig_task;
+	struct fcoe_task_ctx_entry *task_page;
+	struct fcoe_ext_mul_sges_ctx *sgl;
+	u8 task_type = FCOE_TASK_TYPE_SEQUENCE_CLEANUP;
+	u8 orig_task_type;
+	u16 orig_xid = orig_io_req->xid;
+	u32 context_id = tgt->context_id;
+	u64 phys_addr = (u64)orig_io_req->bd_tbl->bd_tbl_dma;
+	u32 orig_offset = offset;
+	int bd_count;
+	int orig_task_idx, index;
+	int i;
+
+	memset(task, 0, sizeof(struct fcoe_task_ctx_entry));
+
+	if (sc_cmd->sc_data_direction == DMA_TO_DEVICE)
+		orig_task_type = FCOE_TASK_TYPE_WRITE;
+	else
+		orig_task_type = FCOE_TASK_TYPE_READ;
+
+	/* Tx flags */
+	task->txwr_rxrd.const_ctx.tx_flags =
+				FCOE_TASK_TX_STATE_SEQUENCE_CLEANUP <<
+				FCOE_TCE_TX_WR_RX_RD_CONST_TX_STATE_SHIFT;
+	/* init flags */
+	task->txwr_rxrd.const_ctx.init_flags = task_type <<
+				FCOE_TCE_TX_WR_RX_RD_CONST_TASK_TYPE_SHIFT;
+	task->txwr_rxrd.const_ctx.init_flags |= FCOE_TASK_CLASS_TYPE_3 <<
+				FCOE_TCE_TX_WR_RX_RD_CONST_CLASS_TYPE_SHIFT;
+	task->rxwr_txrd.const_ctx.init_flags = context_id <<
+				FCOE_TCE_RX_WR_TX_RD_CONST_CID_SHIFT;
+	task->rxwr_txrd.const_ctx.init_flags = context_id <<
+				FCOE_TCE_RX_WR_TX_RD_CONST_CID_SHIFT;
+
+	task->txwr_rxrd.union_ctx.cleanup.ctx.cleaned_task_id = orig_xid;
+
+	task->txwr_rxrd.union_ctx.cleanup.ctx.rolled_tx_seq_cnt = 0;
+	task->txwr_rxrd.union_ctx.cleanup.ctx.rolled_tx_data_offset = offset;
+
+	bd_count = orig_io_req->bd_tbl->bd_valid;
+
+	/* obtain the appropriate bd entry from relative offset */
+	for (i = 0; i < bd_count; i++) {
+		if (offset < bd[i].buf_len)
+			break;
+		offset -= bd[i].buf_len;
+	}
+	phys_addr += (i * sizeof(struct fcoe_bd_ctx));
+
+	if (orig_task_type == FCOE_TASK_TYPE_WRITE) {
+		task->txwr_only.sgl_ctx.sgl.mul_sgl.cur_sge_addr.lo =
+				(u32)phys_addr;
+		task->txwr_only.sgl_ctx.sgl.mul_sgl.cur_sge_addr.hi =
+				(u32)((u64)phys_addr >> 32);
+		task->txwr_only.sgl_ctx.sgl.mul_sgl.sgl_size =
+				bd_count;
+		task->txwr_only.sgl_ctx.sgl.mul_sgl.cur_sge_off =
+				offset; /* adjusted offset */
+		task->txwr_only.sgl_ctx.sgl.mul_sgl.cur_sge_idx = i;
+	} else {
+		orig_task_idx = orig_xid / BNX2FC_TASKS_PER_PAGE;
+		index = orig_xid % BNX2FC_TASKS_PER_PAGE;
+
+		task_page = (struct fcoe_task_ctx_entry *)
+			     interface->hba->task_ctx[orig_task_idx];
+		orig_task = &(task_page[index]);
+
+		/* Multiple SGEs were used for this IO */
+		sgl = &task->rxwr_only.union_ctx.read_info.sgl_ctx.sgl;
+		sgl->mul_sgl.cur_sge_addr.lo = (u32)phys_addr;
+		sgl->mul_sgl.cur_sge_addr.hi = (u32)((u64)phys_addr >> 32);
+		sgl->mul_sgl.sgl_size = bd_count;
+		sgl->mul_sgl.cur_sge_off = offset; /*adjusted offset */
+		sgl->mul_sgl.cur_sge_idx = i;
+
+		memset(&task->rxwr_only.rx_seq_ctx, 0,
+		       sizeof(struct fcoe_rx_seq_ctx));
+		task->rxwr_only.rx_seq_ctx.low_exp_ro = orig_offset;
+		task->rxwr_only.rx_seq_ctx.high_exp_ro = orig_offset;
+	}
+}
 void bnx2fc_init_cleanup_task(struct bnx2fc_cmd *io_req,
 			      struct fcoe_task_ctx_entry *task,
 			      u16 orig_xid)