summaryrefslogtreecommitdiffstats
path: root/drivers/remoteproc/remoteproc_debugfs.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-03-27 16:30:09 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-03-27 16:30:09 -0700
commit46b407ca4a6149c8d27fcec1881d4f184bec7c77 (patch)
treea608dadec12b8dd74866721b3de32435f575e809 /drivers/remoteproc/remoteproc_debugfs.c
parent1bfecd935849a45b6b47d9f011e1c278ff880512 (diff)
parent6458acb5a31926dcc1295410221493544d628cf7 (diff)
downloadblackbird-op-linux-46b407ca4a6149c8d27fcec1881d4f184bec7c77.tar.gz
blackbird-op-linux-46b407ca4a6149c8d27fcec1881d4f184bec7c77.zip
Merge tag 'rpmsg' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull "remoteproc/rpmsg: new subsystem" from Arnd Bergmann: "This new subsystem provides a common way to talk to secondary processors on an SoC, e.g. a DSP, GPU or service processor, using virtio as the transport. In the long run, it should replace a few dozen vendor specific ways to do the same thing, which all never made it into the upstream kernel. There is a broad agreement that rpmsg is the way to go here and several vendors have started working on replacing their own subsystems. Two branches each add one virtio protocol number. Fortunately the numbers were agreed upon in advance, so there are only context changes. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fixed up trivial protocol number conflict due to the mentioned additions next to each other. * tag 'rpmsg' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits) remoteproc: cleanup resource table parsing paths remoteproc: remove the hardcoded vring alignment remoteproc/omap: remove the mbox_callback limitation remoteproc: remove the single rpmsg vdev limitation remoteproc: safer boot/shutdown order remoteproc: remoteproc_rpmsg -> remoteproc_virtio remoteproc: resource table overhaul rpmsg: fix build warning when dma_addr_t is 64-bit rpmsg: fix published buffer length in rpmsg_recv_done rpmsg: validate incoming message length before propagating rpmsg: fix name service endpoint leak remoteproc/omap: two Kconfig fixes remoteproc: make sure we're parsing a 32bit firmware remoteproc: s/big switch/lookup table/ remoteproc: bail out if firmware has different endianess remoteproc: don't use virtio's weak barriers rpmsg: rename virtqueue_add_buf_gfp to virtqueue_add_buf rpmsg: depend on EXPERIMENTAL remoteproc: depend on EXPERIMENTAL rpmsg: add Kconfig menu ... Conflicts: include/linux/virtio_ids.h
Diffstat (limited to 'drivers/remoteproc/remoteproc_debugfs.c')
-rw-r--r--drivers/remoteproc/remoteproc_debugfs.c179
1 files changed, 179 insertions, 0 deletions
diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
new file mode 100644
index 000000000000..70277a530133
--- /dev/null
+++ b/drivers/remoteproc/remoteproc_debugfs.c
@@ -0,0 +1,179 @@
+/*
+ * Remote Processor Framework
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * Ohad Ben-Cohen <ohad@wizery.com>
+ * Mark Grosen <mgrosen@ti.com>
+ * Brian Swetland <swetland@google.com>
+ * Fernando Guzman Lugo <fernando.lugo@ti.com>
+ * Suman Anna <s-anna@ti.com>
+ * Robert Tivy <rtivy@ti.com>
+ * Armando Uribe De Leon <x0095078@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/kernel.h>
+#include <linux/debugfs.h>
+#include <linux/remoteproc.h>
+#include <linux/device.h>
+
+/* remoteproc debugfs parent dir */
+static struct dentry *rproc_dbg;
+
+/*
+ * Some remote processors may support dumping trace logs into a shared
+ * memory buffer. We expose this trace buffer using debugfs, so users
+ * can easily tell what's going on remotely.
+ *
+ * We will most probably improve the rproc tracing facilities later on,
+ * but this kind of lightweight and simple mechanism is always good to have,
+ * as it provides very early tracing with little to no dependencies at all.
+ */
+static ssize_t rproc_trace_read(struct file *filp, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct rproc_mem_entry *trace = filp->private_data;
+ int len = strnlen(trace->va, trace->len);
+
+ return simple_read_from_buffer(userbuf, count, ppos, trace->va, len);
+}
+
+static int rproc_open_generic(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+
+ return 0;
+}
+
+static const struct file_operations trace_rproc_ops = {
+ .read = rproc_trace_read,
+ .open = rproc_open_generic,
+ .llseek = generic_file_llseek,
+};
+
+/*
+ * A state-to-string lookup table, for exposing a human readable state
+ * via debugfs. Always keep in sync with enum rproc_state
+ */
+static const char * const rproc_state_string[] = {
+ "offline",
+ "suspended",
+ "running",
+ "crashed",
+ "invalid",
+};
+
+/* expose the state of the remote processor via debugfs */
+static ssize_t rproc_state_read(struct file *filp, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct rproc *rproc = filp->private_data;
+ unsigned int state;
+ char buf[30];
+ int i;
+
+ state = rproc->state > RPROC_LAST ? RPROC_LAST : rproc->state;
+
+ i = snprintf(buf, 30, "%.28s (%d)\n", rproc_state_string[state],
+ rproc->state);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, i);
+}
+
+static const struct file_operations rproc_state_ops = {
+ .read = rproc_state_read,
+ .open = rproc_open_generic,
+ .llseek = generic_file_llseek,
+};
+
+/* expose the name of the remote processor via debugfs */
+static ssize_t rproc_name_read(struct file *filp, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct rproc *rproc = filp->private_data;
+ /* need room for the name, a newline and a terminating null */
+ char buf[100];
+ int i;
+
+ i = snprintf(buf, sizeof(buf), "%.98s\n", rproc->name);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, i);
+}
+
+static const struct file_operations rproc_name_ops = {
+ .read = rproc_name_read,
+ .open = rproc_open_generic,
+ .llseek = generic_file_llseek,
+};
+
+void rproc_remove_trace_file(struct dentry *tfile)
+{
+ debugfs_remove(tfile);
+}
+
+struct dentry *rproc_create_trace_file(const char *name, struct rproc *rproc,
+ struct rproc_mem_entry *trace)
+{
+ struct dentry *tfile;
+
+ tfile = debugfs_create_file(name, 0400, rproc->dbg_dir,
+ trace, &trace_rproc_ops);
+ if (!tfile) {
+ dev_err(rproc->dev, "failed to create debugfs trace entry\n");
+ return NULL;
+ }
+
+ return tfile;
+}
+
+void rproc_delete_debug_dir(struct rproc *rproc)
+{
+ if (!rproc->dbg_dir)
+ return;
+
+ debugfs_remove_recursive(rproc->dbg_dir);
+}
+
+void rproc_create_debug_dir(struct rproc *rproc)
+{
+ struct device *dev = rproc->dev;
+
+ if (!rproc_dbg)
+ return;
+
+ rproc->dbg_dir = debugfs_create_dir(dev_name(dev), rproc_dbg);
+ if (!rproc->dbg_dir)
+ return;
+
+ debugfs_create_file("name", 0400, rproc->dbg_dir,
+ rproc, &rproc_name_ops);
+ debugfs_create_file("state", 0400, rproc->dbg_dir,
+ rproc, &rproc_state_ops);
+}
+
+void __init rproc_init_debugfs(void)
+{
+ if (debugfs_initialized()) {
+ rproc_dbg = debugfs_create_dir(KBUILD_MODNAME, NULL);
+ if (!rproc_dbg)
+ pr_err("can't create debugfs dir\n");
+ }
+}
+
+void __exit rproc_exit_debugfs(void)
+{
+ if (rproc_dbg)
+ debugfs_remove(rproc_dbg);
+}
OpenPOWER on IntegriCloud