[PATCH] yenta TI: turn off interrupts during card power-on #2

- make boot-up card recognition more reliable (ie.  redo interrogation
  always if there is no valid 'card inserted' state) (and yes, i saw it
  happening on an o2micro controller that both CB_CBARD and CB_16BITCARD
  bits were set at the same time)

- also redo interrogation before probing the ISA interrupts.  it's safer
  to do the probing with the socket in a clean state.

- make card insert detect more reliable.  yenta_get_status() now returns
  SS_PENDING as long as the card is not completley inserted and one of the
  voltage bits is set.  also !CB_CBARD doesn't mean CB_16BITCARD.  there is
  CB_NOTACARD as well, so make an explicit check for CB_16BITCARD.

- for TI bridges: disable IRQs during power-on.  in all-serial and tied
  interrupt mode the interrupts are always disabled for single-slot
  controllers.  for two-slot contollers the disabling is only done when the
  other slot is empty.  to force disabling there is a new module parameter
  now: pwr_irqs_off=Y (which is a regression for working setups.  that's
  why it's an option, only use when required)

- modparm to disable ISA interrupt probing (isa_probe, defaults to on)

- remove unneeded code/cleanups (ie.  merge yenta_events() into
  yenta_interrupts())

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 10 insertions, 1 deletions

diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index 03fc885db1c5..d136b3c8fac9 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -508,6 +508,10 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
 		cs_err(skt, "unsupported voltage key.\n");
 		return CS_BAD_TYPE;
 	}
+
+	if (skt->power_hook)
+		skt->power_hook(skt, HOOK_POWER_PRE);
+
 	skt->socket.flags = 0;
 	skt->ops->set_socket(skt, &skt->socket);
 
@@ -522,7 +526,12 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
 		return CS_BAD_TYPE;
 	}
 
-	return socket_reset(skt);
+	status = socket_reset(skt);
+
+	if (skt->power_hook)
+		skt->power_hook(skt, HOOK_POWER_POST);
+
+	return status;
 }
 
 /*