diff options
author | Grant Grundler <grundler@parisc-linux.org> | 2006-09-08 11:15:40 -0700 |
---|---|---|
committer | Jeff Garzik <jeff@garzik.org> | 2006-09-11 09:05:37 -0400 |
commit | 42eab56776b7c9686ee39f8f677a3e3b09caa170 (patch) | |
tree | 79a4612538438a1c91d5aa1883a8115296a91540 /drivers/net | |
parent | 7f2b12482c86d69ed1804d239a52ea846ef294f2 (diff) | |
download | blackbird-op-linux-42eab56776b7c9686ee39f8f677a3e3b09caa170.tar.gz blackbird-op-linux-42eab56776b7c9686ee39f8f677a3e3b09caa170.zip |
[PATCH] Use tulip.h in winbond-840.c
Include "tulip.h" in winbond-840.c and clean up lots of redundant
definitions.
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Signed-off-by: Valerie Henson <val_henson@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/tulip/winbond-840.c | 68 |
1 files changed, 24 insertions, 44 deletions
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c index 6b82d1498223..b54378fac8f0 100644 --- a/drivers/net/tulip/winbond-840.c +++ b/drivers/net/tulip/winbond-840.c @@ -90,10 +90,8 @@ static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; Making the Tx ring too large decreases the effectiveness of channel bonding and packet priority. There are no ill effects from too-large receive rings. */ -#define TX_RING_SIZE 16 #define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */ #define TX_QUEUE_LEN_RESTART 5 -#define RX_RING_SIZE 32 #define TX_BUFLIMIT (1024-128) @@ -137,6 +135,8 @@ static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; #include <asm/io.h> #include <asm/irq.h> +#include "tulip.h" + /* These identify the driver base version and may not be removed. */ static char version[] = KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) " DRV_RELDATE " Donald Becker <becker@scyld.com>\n" @@ -242,8 +242,8 @@ static const struct pci_id_info pci_id_tbl[] __devinitdata = { }; /* This driver was written to use PCI memory space, however some x86 systems - work only with I/O space accesses. Pass -DUSE_IO_OPS to use PCI I/O space - accesses instead of memory space. */ + work only with I/O space accesses. See CONFIG_TULIP_MMIO in .config +*/ /* Offsets to the Command and Status Registers, "CSRs". While similar to the Tulip, these registers are longword aligned. @@ -261,21 +261,11 @@ enum w840_offsets { CurTxDescAddr=0x4C, CurTxBufAddr=0x50, }; -/* Bits in the interrupt status/enable registers. */ -/* The bits in the Intr Status/Enable registers, mostly interrupt sources. */ -enum intr_status_bits { - NormalIntr=0x10000, AbnormalIntr=0x8000, - IntrPCIErr=0x2000, TimerInt=0x800, - IntrRxDied=0x100, RxNoBuf=0x80, IntrRxDone=0x40, - TxFIFOUnderflow=0x20, RxErrIntr=0x10, - TxIdle=0x04, IntrTxStopped=0x02, IntrTxDone=0x01, -}; - /* Bits in the NetworkConfig register. */ enum rx_mode_bits { - AcceptErr=0x80, AcceptRunt=0x40, - AcceptBroadcast=0x20, AcceptMulticast=0x10, - AcceptAllPhys=0x08, AcceptMyPhys=0x02, + AcceptErr=0x80, + RxAcceptBroadcast=0x20, AcceptMulticast=0x10, + RxAcceptAllPhys=0x08, AcceptMyPhys=0x02, }; enum mii_reg_bits { @@ -297,13 +287,6 @@ struct w840_tx_desc { u32 buffer1, buffer2; }; -/* Bits in network_desc.status */ -enum desc_status_bits { - DescOwn=0x80000000, DescEndRing=0x02000000, DescUseLink=0x01000000, - DescWholePkt=0x60000000, DescStartPkt=0x20000000, DescEndPkt=0x40000000, - DescIntr=0x80000000, -}; - #define MII_CNT 1 /* winbond only supports one MII */ struct netdev_private { struct w840_rx_desc *rx_ring; @@ -371,7 +354,6 @@ static int __devinit w840_probe1 (struct pci_dev *pdev, int irq; int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0; void __iomem *ioaddr; - int bar = 1; i = pci_enable_device(pdev); if (i) return i; @@ -393,10 +375,8 @@ static int __devinit w840_probe1 (struct pci_dev *pdev, if (pci_request_regions(pdev, DRV_NAME)) goto err_out_netdev; -#ifdef USE_IO_OPS - bar = 0; -#endif - ioaddr = pci_iomap(pdev, bar, netdev_res_size); + + ioaddr = pci_iomap(pdev, TULIP_BAR, netdev_res_size); if (!ioaddr) goto err_out_free_res; @@ -838,7 +818,7 @@ static void init_rxtx_rings(struct net_device *dev) np->rx_buf_sz,PCI_DMA_FROMDEVICE); np->rx_ring[i].buffer1 = np->rx_addr[i]; - np->rx_ring[i].status = DescOwn; + np->rx_ring[i].status = DescOwned; } np->cur_rx = 0; @@ -923,7 +903,7 @@ static void init_registers(struct net_device *dev) } #elif defined(__powerpc__) || defined(__i386__) || defined(__alpha__) || defined(__ia64__) || defined(__x86_64__) i |= 0xE000; -#elif defined(__sparc__) +#elif defined(__sparc__) || defined (CONFIG_PARISC) i |= 0x4800; #else #warning Processor architecture undefined @@ -1043,11 +1023,11 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev) /* Now acquire the irq spinlock. * The difficult race is the the ordering between - * increasing np->cur_tx and setting DescOwn: + * increasing np->cur_tx and setting DescOwned: * - if np->cur_tx is increased first the interrupt * handler could consider the packet as transmitted - * since DescOwn is cleared. - * - If DescOwn is set first the NIC could report the + * since DescOwned is cleared. + * - If DescOwned is set first the NIC could report the * packet as sent, but the interrupt handler would ignore it * since the np->cur_tx was not yet increased. */ @@ -1055,7 +1035,7 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev) np->cur_tx++; wmb(); /* flush length, buffer1, buffer2 */ - np->tx_ring[entry].status = DescOwn; + np->tx_ring[entry].status = DescOwned; wmb(); /* flush status and kick the hardware */ iowrite32(0, np->base_addr + TxStartDemand); np->tx_q_bytes += skb->len; @@ -1155,12 +1135,12 @@ static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs handled = 1; - if (intr_status & (IntrRxDone | RxNoBuf)) + if (intr_status & (RxIntr | RxNoBuf)) netdev_rx(dev); if (intr_status & RxNoBuf) iowrite32(0, ioaddr + RxStartDemand); - if (intr_status & (TxIdle | IntrTxDone) && + if (intr_status & (TxNoBuf | TxIntr) && np->cur_tx != np->dirty_tx) { spin_lock(&np->lock); netdev_tx_done(dev); @@ -1168,8 +1148,8 @@ static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs } /* Abnormal error summary/uncommon events handlers. */ - if (intr_status & (AbnormalIntr | TxFIFOUnderflow | IntrPCIErr | - TimerInt | IntrTxStopped)) + if (intr_status & (AbnormalIntr | TxFIFOUnderflow | SytemError | + TimerInt | TxDied)) netdev_error(dev, intr_status); if (--work_limit < 0) { @@ -1305,7 +1285,7 @@ static int netdev_rx(struct net_device *dev) np->rx_ring[entry].buffer1 = np->rx_addr[entry]; } wmb(); - np->rx_ring[entry].status = DescOwn; + np->rx_ring[entry].status = DescOwned; } return 0; @@ -1342,7 +1322,7 @@ static void netdev_error(struct net_device *dev, int intr_status) dev->name, new); update_csr6(dev, new); } - if (intr_status & IntrRxDied) { /* Missed a Rx frame. */ + if (intr_status & RxDied) { /* Missed a Rx frame. */ np->stats.rx_errors++; } if (intr_status & TimerInt) { @@ -1381,13 +1361,13 @@ static u32 __set_rx_mode(struct net_device *dev) /* Unconditionally log net taps. */ printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", dev->name); memset(mc_filter, 0xff, sizeof(mc_filter)); - rx_mode = AcceptBroadcast | AcceptMulticast | AcceptAllPhys + rx_mode = RxAcceptBroadcast | AcceptMulticast | RxAcceptAllPhys | AcceptMyPhys; } else if ((dev->mc_count > multicast_filter_limit) || (dev->flags & IFF_ALLMULTI)) { /* Too many to match, or accept all multicasts. */ memset(mc_filter, 0xff, sizeof(mc_filter)); - rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; + rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys; } else { struct dev_mc_list *mclist; int i; @@ -1398,7 +1378,7 @@ static u32 __set_rx_mode(struct net_device *dev) filterbit &= 0x3f; mc_filter[filterbit >> 5] |= 1 << (filterbit & 31); } - rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; + rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys; } iowrite32(mc_filter[0], ioaddr + MulticastFilter0); iowrite32(mc_filter[1], ioaddr + MulticastFilter1); |