Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (22 commits)
  pcmcia: synclink_cs: fix information leak to userland
  pcmcia: don't call flush_scheduled_work() spuriously
  serial_cs: drop spurious flush_scheduled_work() call
  pcmcia/yenta: guide users in case of problems with O2-bridges
  pcmcia: fix unused function compile warning
  pcmcia: vrc4173_cardu: Fix error path for pci_release_regions and pci_disable_device
  pcmcia: add a few debug statements
  pcmcia: remove obsolete and wrong comments
  pcmcia: avoid messages on module (un)loading
  pcmcia: move driver name to struct pcmcia_driver
  pcmcia: remove the "Finally, report what we've done" message
  pcmcia: use autoconfiguration feature for ioports and iomem
  pcmcia: introduce autoconfiguration feature
  pcmcia: Documentation update
  pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device
  pcmcia: move config_{base,index,regs} to struct pcmcia_device
  pcmcia: simplify IntType
  pcmcia: simplify Status, ExtStatus register access
  pcmcia: remove Pin, Copy configuration register access
  pcmcia: move Vpp setup to struct pcmcia_device
  ...

10 files changed, 96 insertions, 788 deletions

diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index 9a121a5b787c..df2484d45474 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -32,7 +32,6 @@
 #include <linux/timer.h>
 #include <linux/netdevice.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -54,58 +53,21 @@ MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards");
 
 /*====================================================================*/
 
-/*
-   The event() function is this driver's Card Services event handler.
-   It will be called by Card Services when an appropriate card status
-   event is received.  The config() and release() entry points are
-   used to configure or release a socket, in response to card
-   insertion and ejection events.  They are invoked from the airo_cs
-   event handler.
-*/
-
 static int airo_config(struct pcmcia_device *link);
 static void airo_release(struct pcmcia_device *link);
 
-/*
-   The attach() and detach() entry points are used to create and destroy
-   "instances" of the driver, where each instance represents everything
-   needed to manage one actual PCMCIA card.
-*/
-
 static void airo_detach(struct pcmcia_device *p_dev);
 
 typedef struct local_info_t {
 	struct net_device *eth_dev;
 } local_info_t;
 
-/*======================================================================
-
-  airo_attach() creates an "instance" of the driver, allocating
-  local data structures for one device.  The device is registered
-  with Card Services.
-
-  The dev_link structure is initialized, but we don't actually
-  configure the card at this point -- we wait until we receive a
-  card insertion event.
-
-  ======================================================================*/
-
 static int airo_probe(struct pcmcia_device *p_dev)
 {
 	local_info_t *local;
 
 	dev_dbg(&p_dev->dev, "airo_attach()\n");
 
-	/*
-	  General socket configuration defaults can go here.  In this
-	  client, we assume very little, and rely on the CIS for almost
-	  everything.  In most clients, many details (i.e., number, sizes,
-	  and attributes of IO windows) are fixed by the nature of the
-	  device, and can be hard-wired here.
-	*/
-	p_dev->conf.Attributes = 0;
-	p_dev->conf.IntType = INT_MEMORY_AND_IO;
-
 	/* Allocate space for private device-specific data */
 	local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
 	if (!local) {
@@ -117,15 +79,6 @@ static int airo_probe(struct pcmcia_device *p_dev)
 	return airo_config(p_dev);
 } /* airo_attach */
 
-/*======================================================================
-
-  This deletes a driver "instance".  The device is de-registered
-  with Card Services.  If it has been released, all local data
-  structures are freed.  Otherwise, the structures will be freed
-  when the device is released.
-
-  ======================================================================*/
-
 static void airo_detach(struct pcmcia_device *link)
 {
 	dev_dbg(&link->dev, "airo_detach\n");
@@ -140,60 +93,12 @@ static void airo_detach(struct pcmcia_device *link)
 	kfree(link->priv);
 } /* airo_detach */
 
-/*======================================================================
-
-  airo_config() is scheduled to run after a CARD_INSERTION event
-  is received, to configure the PCMCIA socket, and to make the
-  device available to the system.
-
-  ======================================================================*/
-
-static int airo_cs_config_check(struct pcmcia_device *p_dev,
-				cistpl_cftable_entry_t *cfg,
-				cistpl_cftable_entry_t *dflt,
-				unsigned int vcc,
-				void *priv_data)
+static int airo_cs_config_check(struct pcmcia_device *p_dev, void *priv_data)
 {
-	if (cfg->index == 0)
-		return -ENODEV;
-
-	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
-		p_dev->conf.Status = CCSR_AUDIO_ENA;
-	}
-
-	/* Use power settings for Vcc and Vpp if present */
-	/*  Note that the CIS values need to be rescaled */
-	if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
-	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
-
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-
-	/* IO window settings */
-	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-		p_dev->resource[0]->flags |=
-					pcmcia_io_cfg_data_width(io->flags);
-		p_dev->resource[0]->start = io->win[0].base;
-		p_dev->resource[0]->end = io->win[0].len;
-		if (io->nwin > 1) {
-			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
-			p_dev->resource[1]->start = io->win[1].base;
-			p_dev->resource[1]->end = io->win[1].len;
-		}
-	}
+	if (p_dev->config_index == 0)
+		return -EINVAL;
 
-	/* This reserves IO space but doesn't actually enable it */
-	if (pcmcia_request_io(p_dev) != 0)
-		return -ENODEV;
-
-	/* If we got this far, we're cool! */
-	return 0;
+	return pcmcia_request_io(p_dev);
 }
 
 
@@ -206,20 +111,9 @@ static int airo_config(struct pcmcia_device *link)
 
 	dev_dbg(&link->dev, "airo_config\n");
 
-	/*
-	 * In this loop, we scan the CIS for configuration table
-	 * entries, each of which describes a valid card
-	 * configuration, including voltage, IO window, memory window,
-	 * and interrupt settings.
-	 *
-	 * We make no assumptions about the card to be configured: we
-	 * use just the information available in the CIS.  In an ideal
-	 * world, this would work for any PCMCIA card, but it requires
-	 * a complete and accurate CIS.  In practice, a driver usually
-	 * "knows" most of these things without consulting the CIS,
-	 * and most client drivers will only use the CIS to fill in
-	 * implementation-defined details.
-	 */
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
+		CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
+
 	ret = pcmcia_loop_config(link, airo_cs_config_check, NULL);
 	if (ret)
 		goto failed;
@@ -227,12 +121,7 @@ static int airo_config(struct pcmcia_device *link)
 	if (!link->irq)
 		goto failed;
 
-	/*
-	  This actually configures the PCMCIA socket -- setting up
-	  the I/O windows and the interrupt mapping, and putting the
-	  card and host interface into "Memory and IO" mode.
-	*/
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 	((local_info_t *)link->priv)->eth_dev =
@@ -241,17 +130,6 @@ static int airo_config(struct pcmcia_device *link)
 	if (!((local_info_t *)link->priv)->eth_dev)
 		goto failed;
 
-	/* Finally, report what we've done */
-	dev_info(&link->dev, "index 0x%02x: ",
-	       link->conf.ConfigIndex);
-	if (link->conf.Vpp)
-		printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
-	printk(", irq %d", link->irq);
-	if (link->resource[0])
-		printk(" & %pR", link->resource[0]);
-	if (link->resource[1])
-		printk(" & %pR", link->resource[1]);
-	printk("\n");
 	return 0;
 
  failed:
@@ -259,14 +137,6 @@ static int airo_config(struct pcmcia_device *link)
 	return -ENODEV;
 } /* airo_config */
 
-/*======================================================================
-
-  After a card is removed, airo_release() will unregister the
-  device, and release the PCMCIA configuration.  If the device is
-  still open, this will be postponed until it is closed.
-
-  ======================================================================*/
-
 static void airo_release(struct pcmcia_device *link)
 {
 	dev_dbg(&link->dev, "airo_release\n");
@@ -305,9 +175,7 @@ MODULE_DEVICE_TABLE(pcmcia, airo_ids);
 
 static struct pcmcia_driver airo_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "airo_cs",
-	},
+	.name		= "airo_cs",
 	.probe		= airo_probe,
 	.remove		= airo_detach,
 	.id_table       = airo_ids,
@@ -315,12 +183,12 @@ static struct pcmcia_driver airo_driver = {
 	.resume		= airo_resume,
 };
 
-static int airo_cs_init(void)
+static int __init airo_cs_init(void)
 {
 	return pcmcia_register_driver(&airo_driver);
 }
 
-static void airo_cs_cleanup(void)
+static void __exit airo_cs_cleanup(void)
 {
 	pcmcia_unregister_driver(&airo_driver);
 }
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 3b632161c106..c96e19da2949 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -42,7 +42,6 @@
 #include <linux/moduleparam.h>
 #include <linux/device.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -64,58 +63,21 @@ MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards");
 
 /*====================================================================*/
 
-/*
-   The event() function is this driver's Card Services event handler.
-   It will be called by Card Services when an appropriate card status
-   event is received.  The config() and release() entry points are
-   used to configure or release a socket, in response to card
-   insertion and ejection events.  They are invoked from the atmel_cs
-   event handler.
-*/
-
 static int atmel_config(struct pcmcia_device *link);
 static void atmel_release(struct pcmcia_device *link);
 
-/*
-   The attach() and detach() entry points are used to create and destroy
-   "instances" of the driver, where each instance represents everything
-   needed to manage one actual PCMCIA card.
-*/
-
 static void atmel_detach(struct pcmcia_device *p_dev);
 
 typedef struct local_info_t {
 	struct net_device *eth_dev;
 } local_info_t;
 
-/*======================================================================
-
-  atmel_attach() creates an "instance" of the driver, allocating
-  local data structures for one device.  The device is registered
-  with Card Services.
-
-  The dev_link structure is initialized, but we don't actually
-  configure the card at this point -- we wait until we receive a
-  card insertion event.
-
-  ======================================================================*/
-
 static int atmel_probe(struct pcmcia_device *p_dev)
 {
 	local_info_t *local;
 
 	dev_dbg(&p_dev->dev, "atmel_attach()\n");
 
-	/*
-	  General socket configuration defaults can go here.  In this
-	  client, we assume very little, and rely on the CIS for almost
-	  everything.  In most clients, many details (i.e., number, sizes,
-	  and attributes of IO windows) are fixed by the nature of the
-	  device, and can be hard-wired here.
-	*/
-	p_dev->conf.Attributes = 0;
-	p_dev->conf.IntType = INT_MEMORY_AND_IO;
-
 	/* Allocate space for private device-specific data */
 	local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
 	if (!local) {
@@ -127,15 +89,6 @@ static int atmel_probe(struct pcmcia_device *p_dev)
 	return atmel_config(p_dev);
 } /* atmel_attach */
 
-/*======================================================================
-
-  This deletes a driver "instance".  The device is de-registered
-  with Card Services.  If it has been released, all local data
-  structures are freed.  Otherwise, the structures will be freed
-  when the device is released.
-
-  ======================================================================*/
-
 static void atmel_detach(struct pcmcia_device *link)
 {
 	dev_dbg(&link->dev, "atmel_detach\n");
@@ -145,14 +98,6 @@ static void atmel_detach(struct pcmcia_device *link)
 	kfree(link->priv);
 }
 
-/*======================================================================
-
-  atmel_config() is scheduled to run after a CARD_INSERTION event
-  is received, to configure the PCMCIA socket, and to make the
-  device available to the system.
-
-  ======================================================================*/
-
 /* Call-back function to interrogate PCMCIA-specific information
    about the current existance of the card */
 static int card_present(void *arg)
@@ -165,47 +110,11 @@ static int card_present(void *arg)
 	return 0;
 }
 
-static int atmel_config_check(struct pcmcia_device *p_dev,
-			      cistpl_cftable_entry_t *cfg,
-			      cistpl_cftable_entry_t *dflt,
-			      unsigned int vcc,
-			      void *priv_data)
+static int atmel_config_check(struct pcmcia_device *p_dev, void *priv_data)
 {
-	if (cfg->index == 0)
-		return -ENODEV;
-
-	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
-		p_dev->conf.Status = CCSR_AUDIO_ENA;
-	}
+	if (p_dev->config_index == 0)
+		return -EINVAL;
 
-	/* Use power settings for Vcc and Vpp if present */
-	/*  Note that the CIS values need to be rescaled */
-	if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
-	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
-
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-
-	/* IO window settings */
-	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-		p_dev->resource[0]->flags |=
-					pcmcia_io_cfg_data_width(io->flags);
-		p_dev->resource[0]->start = io->win[0].base;
-		p_dev->resource[0]->end = io->win[0].len;
-		if (io->nwin > 1) {
-			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
-			p_dev->resource[1]->start = io->win[1].base;
-			p_dev->resource[1]->end = io->win[1].len;
-		}
-	}
-
-	/* This reserves IO space but doesn't actually enable it */
 	return pcmcia_request_io(p_dev);
 }
 
@@ -220,18 +129,9 @@ static int atmel_config(struct pcmcia_device *link)
 
 	dev_dbg(&link->dev, "atmel_config\n");
 
-	/*
-	  In this loop, we scan the CIS for configuration table entries,
-	  each of which describes a valid card configuration, including
-	  voltage, IO window, memory window, and interrupt settings.
-
-	  We make no assumptions about the card to be configured: we use
-	  just the information available in the CIS.  In an ideal world,
-	  this would work for any PCMCIA card, but it requires a complete
-	  and accurate CIS.  In practice, a driver usually "knows" most of
-	  these things without consulting the CIS, and most client drivers
-	  will only use the CIS to fill in implementation-defined details.
-	*/
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
+		CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
+
 	if (pcmcia_loop_config(link, atmel_config_check, NULL))
 		goto failed;
 
@@ -240,12 +140,7 @@ static int atmel_config(struct pcmcia_device *link)
 		goto failed;
 	}
 
-	/*
-	  This actually configures the PCMCIA socket -- setting up
-	  the I/O windows and the interrupt mapping, and putting the
-	  card and host interface into "Memory and IO" mode.
-	*/
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
@@ -267,14 +162,6 @@ static int atmel_config(struct pcmcia_device *link)
 	return -ENODEV;
 }
 
-/*======================================================================
-
-  After a card is removed, atmel_release() will unregister the
-  device, and release the PCMCIA configuration.  If the device is
-  still open, this will be postponed until it is closed.
-
-  ======================================================================*/
-
 static void atmel_release(struct pcmcia_device *link)
 {
 	struct net_device *dev = ((local_info_t*)link->priv)->eth_dev;
@@ -353,9 +240,7 @@ MODULE_DEVICE_TABLE(pcmcia, atmel_ids);
 
 static struct pcmcia_driver atmel_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "atmel_cs",
-        },
+	.name		= "atmel_cs",
 	.probe          = atmel_probe,
 	.remove		= atmel_detach,
 	.id_table	= atmel_ids,
@@ -363,12 +248,12 @@ static struct pcmcia_driver atmel_driver = {
 	.resume		= atmel_resume,
 };
 
-static int atmel_cs_init(void)
+static int __init atmel_cs_init(void)
 {
         return pcmcia_register_driver(&atmel_driver);
 }
 
-static void atmel_cs_cleanup(void)
+static void __exit atmel_cs_cleanup(void)
 {
         pcmcia_unregister_driver(&atmel_driver);
 }
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index dfbc41d431ff..7dcba5fafdc7 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -26,7 +26,6 @@
 #include <linux/ssb/ssb.h>
 #include <linux/slab.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
 #include <pcmcia/ds.h>
@@ -63,7 +62,6 @@ static int b43_pcmcia_resume(struct pcmcia_device *dev)
 static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 {
 	struct ssb_bus *ssb;
-	win_req_t win;
 	int err = -ENOMEM;
 	int res = 0;
 
@@ -73,30 +71,28 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 
 	err = -ENODEV;
 
-	dev->conf.Attributes = CONF_ENABLE_IRQ;
-	dev->conf.IntType = INT_MEMORY_AND_IO;
+	dev->config_flags |= CONF_ENABLE_IRQ;
 
-	win.Attributes =  WIN_ENABLE | WIN_DATA_WIDTH_16 |
+	dev->resource[2]->flags |=  WIN_ENABLE | WIN_DATA_WIDTH_16 |
 			 WIN_USE_WAIT;
-	win.Base = 0;
-	win.Size = SSB_CORE_SIZE;
-	win.AccessSpeed = 250;
-	res = pcmcia_request_window(dev, &win, &dev->win);
+	dev->resource[2]->start = 0;
+	dev->resource[2]->end = SSB_CORE_SIZE;
+	res = pcmcia_request_window(dev, dev->resource[2], 250);
 	if (res != 0)
 		goto err_kfree_ssb;
 
-	res = pcmcia_map_mem_page(dev, dev->win, 0);
+	res = pcmcia_map_mem_page(dev, dev->resource[2], 0);
 	if (res != 0)
 		goto err_disable;
 
 	if (!dev->irq)
 		goto err_disable;
 
-	res = pcmcia_request_configuration(dev, &dev->conf);
+	res = pcmcia_enable_device(dev);
 	if (res != 0)
 		goto err_disable;
 
-	err = ssb_bus_pcmciabus_register(ssb, dev, win.Base);
+	err = ssb_bus_pcmciabus_register(ssb, dev, dev->resource[2]->start);
 	if (err)
 		goto err_disable;
 	dev->priv = ssb;
@@ -125,9 +121,7 @@ static void __devexit b43_pcmcia_remove(struct pcmcia_device *dev)
 
 static struct pcmcia_driver b43_pcmcia_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-				.name = "b43-pcmcia",
-			},
+	.name		= "b43-pcmcia",
 	.id_table	= b43_pcmcia_tbl,
 	.probe		= b43_pcmcia_probe,
 	.remove		= __devexit_p(b43_pcmcia_remove),
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index ba54d1b04d22..bd8a4134edeb 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -12,7 +12,6 @@
 #include <linux/wireless.h>
 #include <net/iw_handler.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -437,7 +436,6 @@ static int hostap_cs_probe(struct pcmcia_device *p_dev)
 	int ret;
 
 	PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info);
-	p_dev->conf.IntType = INT_MEMORY_AND_IO;
 
 	ret = prism2_config(p_dev);
 	if (ret) {
@@ -468,74 +466,11 @@ static void prism2_detach(struct pcmcia_device *link)
 }
 
 
-/* run after a CARD_INSERTION event is received to configure the PCMCIA
- * socket and make the device available to the system */
-
-static int prism2_config_check(struct pcmcia_device *p_dev,
-			       cistpl_cftable_entry_t *cfg,
-			       cistpl_cftable_entry_t *dflt,
-			       unsigned int vcc,
-			       void *priv_data)
+static int prism2_config_check(struct pcmcia_device *p_dev, void *priv_data)
 {
-	if (cfg->index == 0)
-		return -ENODEV;
-
-	PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
-	       "(default 0x%02X)\n", cfg->index, dflt->index);
-
-	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
-		p_dev->conf.Status = CCSR_AUDIO_ENA;
-	}
-
-	/* Use power settings for Vcc and Vpp if present */
-	/*  Note that the CIS values need to be rescaled */
-	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
-		    10000 && !ignore_cis_vcc) {
-			PDEBUG(DEBUG_EXTRA, "  Vcc mismatch - skipping"
-			       " this entry\n");
-			return -ENODEV;
-		}
-	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] /
-		    10000 && !ignore_cis_vcc) {
-			PDEBUG(DEBUG_EXTRA, "  Vcc (default) mismatch "
-			       "- skipping this entry\n");
-			return -ENODEV;
-		}
-	}
+	if (p_dev->config_index == 0)
+		return -EINVAL;
 
-	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
-	/* Do we need to allocate an interrupt? */
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-
-	/* IO window settings */
-	PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
-	       "dflt->io.nwin=%d\n",
-	       cfg->io.nwin, dflt->io.nwin);
-	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-		p_dev->resource[0]->flags |=
-					pcmcia_io_cfg_data_width(io->flags);
-		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->resource[0]->start = io->win[0].base;
-		p_dev->resource[0]->end = io->win[0].len;
-		if (io->nwin > 1) {
-			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
-			p_dev->resource[1]->start = io->win[1].base;
-			p_dev->resource[1]->end = io->win[1].len;
-		}
-	}
-
-	/* This reserves IO space but doesn't actually enable it */
 	return pcmcia_request_io(p_dev);
 }
 
@@ -557,6 +492,10 @@ static int prism2_config(struct pcmcia_device *link)
 	}
 
 	/* Look for an appropriate configuration table entry in the CIS */
+	link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO |
+		CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_IO | CONF_ENABLE_IRQ;
+	if (ignore_cis_vcc)
+		link->config_flags &= ~CONF_AUTO_CHECK_VCC;
 	ret = pcmcia_loop_config(link, prism2_config_check, NULL);
 	if (ret) {
 		if (!ignore_cis_vcc)
@@ -588,12 +527,7 @@ static int prism2_config(struct pcmcia_device *link)
 	if (ret)
 		goto failed_unlock;
 
-	/*
-	 * This actually configures the PCMCIA socket -- setting up
-	 * the I/O windows and the interrupt mapping, and putting the
-	 * card and host interface into "Memory and IO" mode.
-	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed_unlock;
 
@@ -602,20 +536,6 @@ static int prism2_config(struct pcmcia_device *link)
 
 	spin_unlock_irqrestore(&local->irq_init_lock, flags);
 
-	/* Finally, report what we've done */
-	printk(KERN_INFO "%s: index 0x%02x: ",
-	       dev_info, link->conf.ConfigIndex);
-	if (link->conf.Vpp)
-		printk(", Vpp %d.%d", link->conf.Vpp / 10,
-		       link->conf.Vpp % 10);
-	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-		printk(", irq %d", link->irq);
-	if (link->resource[0])
-		printk(" & %pR", link->resource[0]);
-	if (link->resource[1])
-		printk(" & %pR", link->resource[1]);
-	printk("\n");
-
 	local->shutdown = 0;
 
 	sandisk_enable_wireless(dev);
@@ -627,7 +547,7 @@ static int prism2_config(struct pcmcia_device *link)
 	return ret;
 
  failed_unlock:
-	 spin_unlock_irqrestore(&local->irq_init_lock, flags);
+	spin_unlock_irqrestore(&local->irq_init_lock, flags);
  failed:
 	kfree(hw_priv);
 	prism2_release((u_long)link);
@@ -779,9 +699,7 @@ MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids);
 
 
 static struct pcmcia_driver hostap_driver = {
-	.drv		= {
-		.name	= "hostap_cs",
-	},
+	.name		= "hostap_cs",
 	.probe		= hostap_cs_probe,
 	.remove		= prism2_detach,
 	.owner		= THIS_MODULE,
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 9c298396be50..ff1280f41336 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -28,7 +28,6 @@
 #include <linux/firmware.h>
 #include <linux/netdevice.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 
@@ -761,15 +760,6 @@ static int if_cs_host_to_card(struct lbs_private *priv,
 }
 
 
-/********************************************************************/
-/* Card Services                                                    */
-/********************************************************************/
-
-/*
- * After a card is removed, if_cs_release() will unregister the
- * device, and release the PCMCIA configuration.  If the device is
- * still open, this will be postponed until it is closed.
- */
 static void if_cs_release(struct pcmcia_device *p_dev)
 {
 	struct if_cs_card *card = p_dev->priv;
@@ -785,31 +775,12 @@ static void if_cs_release(struct pcmcia_device *p_dev)
 }
 
 
-/*
- * This creates an "instance" of the driver, allocating local data
- * structures for one device.  The device is registered with Card
- * Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a card
- * insertion event.
- */
-
-static int if_cs_ioprobe(struct pcmcia_device *p_dev,
-			 cistpl_cftable_entry_t *cfg,
-			 cistpl_cftable_entry_t *dflt,
-			 unsigned int vcc,
-			 void *priv_data)
+static int if_cs_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
 {
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
 	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
-	p_dev->resource[0]->start = cfg->io.win[0].base;
-	p_dev->resource[0]->end = cfg->io.win[0].len;
-
-	/* Do we need to allocate an interrupt? */
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
-	/* IO window settings */
-	if (cfg->io.nwin != 1) {
+	if (p_dev->resource[1]->end) {
 		lbs_pr_err("wrong CIS (check number of IO windows)\n");
 		return -ENODEV;
 	}
@@ -835,15 +806,13 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	card->p_dev = p_dev;
 	p_dev->priv = card;
 
-	p_dev->conf.Attributes = 0;
-	p_dev->conf.IntType = INT_MEMORY_AND_IO;
+	p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
 
 	if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) {
 		lbs_pr_err("error in pcmcia_loop_config\n");
 		goto out1;
 	}
 
-
 	/*
 	 * Allocate an interrupt line.  Note that this does not assign
 	 * a handler to the interrupt, unless the 'Handler' member of
@@ -861,14 +830,9 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 		goto out1;
 	}
 
-	/*
-	 * This actually configures the PCMCIA socket -- setting up
-	 * the I/O windows and the interrupt mapping, and putting the
-	 * card and host interface into "Memory and IO" mode.
-	 */
-	ret = pcmcia_request_configuration(p_dev, &p_dev->conf);
+	ret = pcmcia_enable_device(p_dev);
 	if (ret) {
-		lbs_pr_err("error in pcmcia_request_configuration\n");
+		lbs_pr_err("error in pcmcia_enable_device\n");
 		goto out2;
 	}
 
@@ -962,12 +926,6 @@ out:
 }
 
 
-/*
- * This deletes a driver "instance".  The device is de-registered with
- * Card Services.  If it has been released, all local data structures
- * are freed.  Otherwise, the structures will be freed when the device
- * is released.
- */
 static void if_cs_detach(struct pcmcia_device *p_dev)
 {
 	struct if_cs_card *card = p_dev->priv;
@@ -1000,9 +958,7 @@ MODULE_DEVICE_TABLE(pcmcia, if_cs_ids);
 
 static struct pcmcia_driver lbs_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= DRV_NAME,
-	},
+	.name		= DRV_NAME,
 	.probe		= if_cs_probe,
 	.remove		= if_cs_detach,
 	.id_table       = if_cs_ids,
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index ef46a2d88539..71b3d68b9403 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -17,7 +17,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -93,14 +92,6 @@ orinoco_cs_hard_reset(struct orinoco_private *priv)
 /* PCMCIA stuff     						    */
 /********************************************************************/
 
-/*
- * This creates an "instance" of the driver, allocating local data
- * structures for one device.  The device is registered with Card
- * Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a card
- * insertion event.  */
 static int
 orinoco_cs_probe(struct pcmcia_device *link)
 {
@@ -117,23 +108,9 @@ orinoco_cs_probe(struct pcmcia_device *link)
 	card->p_dev = link;
 	link->priv = priv;
 
-	/* General socket configuration defaults can go here.  In this
-	 * client, we assume very little, and rely on the CIS for
-	 * almost everything.  In most clients, many details (i.e.,
-	 * number, sizes, and attributes of IO windows) are fixed by
-	 * the nature of the device, and can be hard-wired here. */
-	link->conf.Attributes = 0;
-	link->conf.IntType = INT_MEMORY_AND_IO;
-
 	return orinoco_cs_config(link);
 }				/* orinoco_cs_attach */
 
-/*
- * This deletes a driver "instance".  The device is de-registered with
- * Card Services.  If it has been released, all local data structures
- * are freed.  Otherwise, the structures will be freed when the device
- * is released.
- */
 static void orinoco_cs_detach(struct pcmcia_device *link)
 {
 	struct orinoco_private *priv = link->priv;
@@ -145,76 +122,12 @@ static void orinoco_cs_detach(struct pcmcia_device *link)
 	free_orinocodev(priv);
 }				/* orinoco_cs_detach */
 
-/*
- * orinoco_cs_config() is scheduled to run after a CARD_INSERTION
- * event is received, to configure the PCMCIA socket, and to make the
- * device available to the system.
- */
-
-static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
-				   cistpl_cftable_entry_t *cfg,
-				   cistpl_cftable_entry_t *dflt,
-				   unsigned int vcc,
-				   void *priv_data)
+static int orinoco_cs_config_check(struct pcmcia_device *p_dev, void *priv_data)
 {
-	if (cfg->index == 0)
-		goto next_entry;
-
-	/* Use power settings for Vcc and Vpp if present */
-	/* Note that the CIS values need to be rescaled */
-	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
-			DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n",
-			      __func__, vcc,
-			      cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
-			if (!ignore_cis_vcc)
-				goto next_entry;
-		}
-	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
-			DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n",
-			      __func__, vcc,
-			      dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
-			if (!ignore_cis_vcc)
-				goto next_entry;
-		}
-	}
+	if (p_dev->config_index == 0)
+		return -EINVAL;
 
-	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp =
-			cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp =
-			dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
-	/* Do we need to allocate an interrupt? */
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-
-	/* IO window settings */
-	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-		p_dev->resource[0]->flags |=
-			pcmcia_io_cfg_data_width(io->flags);
-		p_dev->resource[0]->start = io->win[0].base;
-		p_dev->resource[0]->end = io->win[0].len;
-		if (io->nwin > 1) {
-			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
-			p_dev->resource[1]->start = io->win[1].base;
-			p_dev->resource[1]->end = io->win[1].len;
-		}
-
-		/* This reserves IO space but doesn't actually enable it */
-		if (pcmcia_request_io(p_dev) != 0)
-			goto next_entry;
-	}
-	return 0;
-
-next_entry:
-	pcmcia_disable_device(p_dev);
-	return -ENODEV;
+	return pcmcia_request_io(p_dev);
 };
 
 static int
@@ -225,20 +138,10 @@ orinoco_cs_config(struct pcmcia_device *link)
 	int ret;
 	void __iomem *mem;
 
-	/*
-	 * In this loop, we scan the CIS for configuration table
-	 * entries, each of which describes a valid card
-	 * configuration, including voltage, IO window, memory window,
-	 * and interrupt settings.
-	 *
-	 * We make no assumptions about the card to be configured: we
-	 * use just the information available in the CIS.  In an ideal
-	 * world, this would work for any PCMCIA card, but it requires
-	 * a complete and accurate CIS.  In practice, a driver usually
-	 * "knows" most of these things without consulting the CIS,
-	 * and most client drivers will only use the CIS to fill in
-	 * implementation-defined details.
-	 */
+	link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC |
+		CONF_AUTO_SET_IO | CONF_ENABLE_IRQ;
+	if (ignore_cis_vcc)
+		link->config_flags &= ~CONF_AUTO_CHECK_VCC;
 	ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
 	if (ret) {
 		if (!ignore_cis_vcc)
@@ -262,12 +165,7 @@ orinoco_cs_config(struct pcmcia_device *link)
 
 	hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
 
-	/*
-	 * This actually configures the PCMCIA socket -- setting up
-	 * the I/O windows and the interrupt mapping, and putting the
-	 * card and host interface into "Memory and IO" mode.
-	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
@@ -291,11 +189,6 @@ orinoco_cs_config(struct pcmcia_device *link)
 	return -ENODEV;
 }				/* orinoco_cs_config */
 
-/*
- * After a card is removed, orinoco_cs_release() will unregister the
- * device, and release the PCMCIA configuration.  If the device is
- * still open, this will be postponed until it is closed.
- */
 static void
 orinoco_cs_release(struct pcmcia_device *link)
 {
@@ -344,12 +237,6 @@ static int orinoco_cs_resume(struct pcmcia_device *link)
 /* Module initialization					    */
 /********************************************************************/
 
-/* Can't be declared "const" or the whole __initdata section will
- * become const */
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
-	" (David Gibson <hermes@gibson.dropbear.id.au>, "
-	"Pavel Roskin <proski@gnu.org>, et al)";
-
 static struct pcmcia_device_id orinoco_cs_ids[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
 	PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */
@@ -441,9 +328,7 @@ MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);
 
 static struct pcmcia_driver orinoco_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= DRIVER_NAME,
-	},
+	.name		= DRIVER_NAME,
 	.probe		= orinoco_cs_probe,
 	.remove		= orinoco_cs_detach,
 	.id_table       = orinoco_cs_ids,
@@ -454,8 +339,6 @@ static struct pcmcia_driver orinoco_driver = {
 static int __init
 init_orinoco_cs(void)
 {
-	printk(KERN_DEBUG "%s\n", version);
-
 	return pcmcia_register_driver(&orinoco_driver);
 }
 
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index 873877e17e1b..fb859a5ad2eb 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -25,7 +25,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -154,14 +153,6 @@ spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle)
 /* PCMCIA stuff     						    */
 /********************************************************************/
 
-/*
- * This creates an "instance" of the driver, allocating local data
- * structures for one device.  The device is registered with Card
- * Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a card
- * insertion event.  */
 static int
 spectrum_cs_probe(struct pcmcia_device *link)
 {
@@ -179,23 +170,9 @@ spectrum_cs_probe(struct pcmcia_device *link)
 	card->p_dev = link;
 	link->priv = priv;
 
-	/* General socket configuration defaults can go here.  In this
-	 * client, we assume very little, and rely on the CIS for
-	 * almost everything.  In most clients, many details (i.e.,
-	 * number, sizes, and attributes of IO windows) are fixed by
-	 * the nature of the device, and can be hard-wired here. */
-	link->conf.Attributes = 0;
-	link->conf.IntType = INT_MEMORY_AND_IO;
-
 	return spectrum_cs_config(link);
 }				/* spectrum_cs_attach */
 
-/*
- * This deletes a driver "instance".  The device is de-registered with
- * Card Services.  If it has been released, all local data structures
- * are freed.  Otherwise, the structures will be freed when the device
- * is released.
- */
 static void spectrum_cs_detach(struct pcmcia_device *link)
 {
 	struct orinoco_private *priv = link->priv;
@@ -207,76 +184,13 @@ static void spectrum_cs_detach(struct pcmcia_device *link)
 	free_orinocodev(priv);
 }				/* spectrum_cs_detach */
 
-/*
- * spectrum_cs_config() is scheduled to run after a CARD_INSERTION
- * event is received, to configure the PCMCIA socket, and to make the
- * device available to the system.
- */
-
 static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
-				    cistpl_cftable_entry_t *cfg,
-				    cistpl_cftable_entry_t *dflt,
-				    unsigned int vcc,
 				    void *priv_data)
 {
-	if (cfg->index == 0)
-		goto next_entry;
-
-	/* Use power settings for Vcc and Vpp if present */
-	/* Note that the CIS values need to be rescaled */
-	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
-			DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n",
-			      __func__, vcc,
-			      cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
-			if (!ignore_cis_vcc)
-				goto next_entry;
-		}
-	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
-			DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n",
-			      __func__, vcc,
-			      dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
-			if (!ignore_cis_vcc)
-				goto next_entry;
-		}
-	}
+	if (p_dev->config_index == 0)
+		return -EINVAL;
 
-	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp =
-			cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp =
-			dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
-	/* Do we need to allocate an interrupt? */
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-
-	/* IO window settings */
-	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-		p_dev->resource[0]->flags |=
-			pcmcia_io_cfg_data_width(io->flags);
-		p_dev->resource[0]->start = io->win[0].base;
-		p_dev->resource[0]->end = io->win[0].len;
-		if (io->nwin > 1) {
-			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
-			p_dev->resource[1]->start = io->win[1].base;
-			p_dev->resource[1]->end = io->win[1].len;
-		}
-
-		/* This reserves IO space but doesn't actually enable it */
-		if (pcmcia_request_io(p_dev) != 0)
-			goto next_entry;
-	}
-	return 0;
-
-next_entry:
-	pcmcia_disable_device(p_dev);
-	return -ENODEV;
+	return pcmcia_request_io(p_dev);
 };
 
 static int
@@ -287,20 +201,10 @@ spectrum_cs_config(struct pcmcia_device *link)
 	int ret;
 	void __iomem *mem;
 
-	/*
-	 * In this loop, we scan the CIS for configuration table
-	 * entries, each of which describes a valid card
-	 * configuration, including voltage, IO window, memory window,
-	 * and interrupt settings.
-	 *
-	 * We make no assumptions about the card to be configured: we
-	 * use just the information available in the CIS.  In an ideal
-	 * world, this would work for any PCMCIA card, but it requires
-	 * a complete and accurate CIS.  In practice, a driver usually
-	 * "knows" most of these things without consulting the CIS,
-	 * and most client drivers will only use the CIS to fill in
-	 * implementation-defined details.
-	 */
+	link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC |
+		CONF_AUTO_SET_IO | CONF_ENABLE_IRQ;
+	if (ignore_cis_vcc)
+		link->config_flags &= ~CONF_AUTO_CHECK_VCC;
 	ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
 	if (ret) {
 		if (!ignore_cis_vcc)
@@ -325,12 +229,7 @@ spectrum_cs_config(struct pcmcia_device *link)
 	hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
 	hw->eeprom_pda = true;
 
-	/*
-	 * This actually configures the PCMCIA socket -- setting up
-	 * the I/O windows and the interrupt mapping, and putting the
-	 * card and host interface into "Memory and IO" mode.
-	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
@@ -358,11 +257,6 @@ spectrum_cs_config(struct pcmcia_device *link)
 	return -ENODEV;
 }				/* spectrum_cs_config */
 
-/*
- * After a card is removed, spectrum_cs_release() will unregister the
- * device, and release the PCMCIA configuration.  If the device is
- * still open, this will be postponed until it is closed.
- */
 static void
 spectrum_cs_release(struct pcmcia_device *link)
 {
@@ -407,12 +301,6 @@ spectrum_cs_resume(struct pcmcia_device *link)
 /* Module initialization					    */
 /********************************************************************/
 
-/* Can't be declared "const" or the whole __initdata section will
- * become const */
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
-	" (Pavel Roskin <proski@gnu.org>,"
-	" David Gibson <hermes@gibson.dropbear.id.au>, et al)";
-
 static struct pcmcia_device_id spectrum_cs_ids[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4137 */
 	PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */
@@ -423,9 +311,7 @@ MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids);
 
 static struct pcmcia_driver orinoco_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= DRIVER_NAME,
-	},
+	.name		= DRIVER_NAME,
 	.probe		= spectrum_cs_probe,
 	.remove		= spectrum_cs_detach,
 	.suspend	= spectrum_cs_suspend,
@@ -436,8 +322,6 @@ static struct pcmcia_driver orinoco_driver = {
 static int __init
 init_spectrum_cs(void)
 {
-	printk(KERN_DEBUG "%s\n", version);
-
 	return pcmcia_register_driver(&orinoco_driver);
 }
 
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 88560d0ae50a..af5b17ce5a15 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -46,7 +46,6 @@
 #include <linux/ethtool.h>
 #include <linux/ieee80211.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -169,13 +168,6 @@ static int bc;
  */
 static char *phy_addr = NULL;
 
-
-/* A struct pcmcia_device structure has fields for most things that are needed
-   to keep track of a socket, but there will usually be some device
-   specific information that also needs to be kept track of.  The
-   'priv' pointer in a struct pcmcia_device structure can be used to point to
-   a device-specific private data structure, like this.
-*/
 static unsigned int ray_mem_speed = 500;
 
 /* WARNING: THIS DRIVER IS NOT CAPABLE OF HANDLING MULTIPLE DEVICES! */
@@ -290,14 +282,6 @@ static const struct net_device_ops ray_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 };
 
-/*=============================================================================
-    ray_attach() creates an "instance" of the driver, allocating
-    local data structures for one device.  The device is registered
-    with Card Services.
-    The dev_link structure is initialized, but we don't actually
-    configure the card at this point -- we wait until we receive a
-    card insertion event.
-=============================================================================*/
 static int ray_probe(struct pcmcia_device *p_dev)
 {
 	ray_dev_t *local;
@@ -318,9 +302,8 @@ static int ray_probe(struct pcmcia_device *p_dev)
 	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 
 	/* General socket configuration */
-	p_dev->conf.Attributes = CONF_ENABLE_IRQ;
-	p_dev->conf.IntType = INT_MEMORY_AND_IO;
-	p_dev->conf.ConfigIndex = 1;
+	p_dev->config_flags |= CONF_ENABLE_IRQ;
+	p_dev->config_index = 1;
 
 	p_dev->priv = dev;
 
@@ -353,12 +336,6 @@ fail_alloc_dev:
 	return -ENOMEM;
 } /* ray_attach */
 
-/*=============================================================================
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-=============================================================================*/
 static void ray_detach(struct pcmcia_device *link)
 {
 	struct net_device *dev;
@@ -381,17 +358,11 @@ static void ray_detach(struct pcmcia_device *link)
 	dev_dbg(&link->dev, "ray_cs ray_detach ending\n");
 } /* ray_detach */
 
-/*=============================================================================
-    ray_config() is run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    ethernet device available to the system.
-=============================================================================*/
 #define MAX_TUPLE_SIZE 128
 static int ray_config(struct pcmcia_device *link)
 {
 	int ret = 0;
 	int i;
-	win_req_t req;
 	struct net_device *dev = (struct net_device *)link->priv;
 	ray_dev_t *local = netdev_priv(dev);
 
@@ -412,54 +383,50 @@ static int ray_config(struct pcmcia_device *link)
 		goto failed;
 	dev->irq = link->irq;
 
-	/* This actually configures the PCMCIA socket -- setting up
-	   the I/O windows and the interrupt mapping.
-	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
 /*** Set up 32k window for shared memory (transmit and control) ************/
-	req.Attributes =
-	    WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT;
-	req.Base = 0;
-	req.Size = 0x8000;
-	req.AccessSpeed = ray_mem_speed;
-	ret = pcmcia_request_window(link, &req, &link->win);
+	link->resource[2]->flags |= WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT;
+	link->resource[2]->start = 0;
+	link->resource[2]->end = 0x8000;
+	ret = pcmcia_request_window(link, link->resource[2], ray_mem_speed);
 	if (ret)
 		goto failed;
-	ret = pcmcia_map_mem_page(link, link->win, 0);
+	ret = pcmcia_map_mem_page(link, link->resource[2], 0);
 	if (ret)
 		goto failed;
-	local->sram = ioremap(req.Base, req.Size);
+	local->sram = ioremap(link->resource[2]->start,
+			resource_size(link->resource[2]));
 
 /*** Set up 16k window for shared memory (receive buffer) ***************/
-	req.Attributes =
+	link->resource[3]->flags |=
 	    WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT;
-	req.Base = 0;
-	req.Size = 0x4000;
-	req.AccessSpeed = ray_mem_speed;
-	ret = pcmcia_request_window(link, &req, &local->rmem_handle);
+	link->resource[3]->start = 0;
+	link->resource[3]->end = 0x4000;
+	ret = pcmcia_request_window(link, link->resource[3], ray_mem_speed);
 	if (ret)
 		goto failed;
-	ret = pcmcia_map_mem_page(link, local->rmem_handle, 0x8000);
+	ret = pcmcia_map_mem_page(link, link->resource[3], 0x8000);
 	if (ret)
 		goto failed;
-	local->rmem = ioremap(req.Base, req.Size);
+	local->rmem = ioremap(link->resource[3]->start,
+			resource_size(link->resource[3]));
 
 /*** Set up window for attribute memory ***********************************/
-	req.Attributes =
+	link->resource[4]->flags |=
 	    WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM | WIN_ENABLE | WIN_USE_WAIT;
-	req.Base = 0;
-	req.Size = 0x1000;
-	req.AccessSpeed = ray_mem_speed;
-	ret = pcmcia_request_window(link, &req, &local->amem_handle);
+	link->resource[4]->start = 0;
+	link->resource[4]->end = 0x1000;
+	ret = pcmcia_request_window(link, link->resource[4], ray_mem_speed);
 	if (ret)
 		goto failed;
-	ret = pcmcia_map_mem_page(link, local->amem_handle, 0);
+	ret = pcmcia_map_mem_page(link, link->resource[4], 0);
 	if (ret)
 		goto failed;
-	local->amem = ioremap(req.Base, req.Size);
+	local->amem = ioremap(link->resource[4]->start,
+			resource_size(link->resource[4]));
 
 	dev_dbg(&link->dev, "ray_config sram=%p\n", local->sram);
 	dev_dbg(&link->dev, "ray_config rmem=%p\n", local->rmem);
@@ -775,11 +742,7 @@ static void join_net(u_long data)
 	local->card_status = CARD_DOING_ACQ;
 }
 
-/*============================================================================
-    After a card is removed, ray_release() will unregister the net
-    device, and release the PCMCIA configuration.  If the device is
-    still open, this will be postponed until it is closed.
-=============================================================================*/
+
 static void ray_release(struct pcmcia_device *link)
 {
 	struct net_device *dev = link->priv;
@@ -2847,9 +2810,7 @@ MODULE_DEVICE_TABLE(pcmcia, ray_ids);
 
 static struct pcmcia_driver ray_driver = {
 	.owner = THIS_MODULE,
-	.drv = {
-		.name = "ray_cs",
-		},
+	.name = "ray_cs",
 	.probe = ray_probe,
 	.remove = ray_detach,
 	.id_table = ray_ids,
diff --git a/drivers/net/wireless/ray_cs.h b/drivers/net/wireless/ray_cs.h
index 9f01ddb19748..e79848fbcca1 100644
--- a/drivers/net/wireless/ray_cs.h
+++ b/drivers/net/wireless/ray_cs.h
@@ -25,8 +25,6 @@ struct beacon_rx {
 typedef struct ray_dev_t {
     int card_status;
     int authentication_state;
-    window_handle_t amem_handle;   /* handle to window for attribute memory  */
-    window_handle_t rmem_handle;   /* handle to window for rx buffer on card */
     void __iomem *sram;            /* pointer to beginning of shared RAM     */
     void __iomem *amem;            /* pointer to attribute mem window        */
     void __iomem *rmem;            /* pointer to receive buffer window       */
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index a1cc2d498a1c..ca3f8961fa27 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -48,7 +48,6 @@
 
 #include <net/iw_handler.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -78,13 +77,6 @@
 #define WL3501_RESUME	0
 #define WL3501_SUSPEND	1
 
-/*
- * The event() function is this driver's Card Services event handler.  It will
- * be called by Card Services when an appropriate card status event is
- * received. The config() and release() entry points are used to configure or
- * release a socket, in response to card insertion and ejection events.  They
- * are invoked from the wl24 event handler.
- */
 static int wl3501_config(struct pcmcia_device *link);
 static void wl3501_release(struct pcmcia_device *link);
 
@@ -1869,15 +1861,6 @@ static const struct net_device_ops wl3501_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 };
 
-/**
- * wl3501_attach - creates an "instance" of the driver
- *
- * Creates an "instance" of the driver, allocating local data structures for
- * one device.  The device is registered with Card Services.
- *
- * The dev_link structure is initialized, but we don't actually configure the
- * card at this point -- we wait until we receive a card insertion event.
- */
 static int wl3501_probe(struct pcmcia_device *p_dev)
 {
 	struct net_device *dev;
@@ -1888,9 +1871,8 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
 	p_dev->resource[0]->flags	= IO_DATA_PATH_WIDTH_8;
 
 	/* General socket configuration */
-	p_dev->conf.Attributes	= CONF_ENABLE_IRQ;
-	p_dev->conf.IntType	= INT_MEMORY_AND_IO;
-	p_dev->conf.ConfigIndex	= 1;
+	p_dev->config_flags	= CONF_ENABLE_IRQ;
+	p_dev->config_index	= 1;
 
 	dev = alloc_etherdev(sizeof(struct wl3501_card));
 	if (!dev)
@@ -1914,14 +1896,6 @@ out_link:
 	return -ENOMEM;
 }
 
-/**
- * wl3501_config - configure the PCMCIA socket and make eth device available
- * @link - FILL_IN
- *
- * wl3501_config() is scheduled to run after a CARD_INSERTION event is
- * received, to configure the PCMCIA socket, and to make the ethernet device
- * available to the system.
- */
 static int wl3501_config(struct pcmcia_device *link)
 {
 	struct net_device *dev = link->priv;
@@ -1952,10 +1926,7 @@ static int wl3501_config(struct pcmcia_device *link)
 	if (ret)
 		goto failed;
 
-	/* This actually configures the PCMCIA socket -- setting up the I/O
-	 * windows and the interrupt mapping.  */
-
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
@@ -2010,14 +1981,6 @@ failed:
 	return -ENODEV;
 }
 
-/**
- * wl3501_release - unregister the net, release PCMCIA configuration
- * @arg - link
- *
- * After a card is removed, wl3501_release() will unregister the net device,
- * and release the PCMCIA configuration.  If the device is still open, this
- * will be postponed until it is closed.
- */
 static void wl3501_release(struct pcmcia_device *link)
 {
 	pcmcia_disable_device(link);
@@ -2056,9 +2019,7 @@ MODULE_DEVICE_TABLE(pcmcia, wl3501_ids);
 
 static struct pcmcia_driver wl3501_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "wl3501_cs",
-	},
+	.name		= "wl3501_cs",
 	.probe		= wl3501_probe,
 	.remove		= wl3501_detach,
 	.id_table	= wl3501_ids,