rtlwifi: rtl8192de: Merge rf routines

Merge routines rf.c and rf.h for RTL8192DE.

Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 628 insertions, 0 deletions

diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/rf.c b/drivers/net/wireless/rtlwifi/rtl8192de/rf.c
new file mode 100644
index 000000000000..c326372220f3
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/rf.c
@@ -0,0 +1,628 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "rf.h"
+#include "dm.h"
+#include "hw.h"
+
+void rtl92d_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u8 rfpath;
+
+	switch (bandwidth) {
+	case HT_CHANNEL_WIDTH_20:
+		for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) {
+			rtlphy->rfreg_chnlval[rfpath] = ((rtlphy->rfreg_chnlval
+					[rfpath] & 0xfffff3ff) | 0x0400);
+			rtl_set_rfreg(hw, rfpath, RF_CHNLBW, BIT(10) |
+				      BIT(11), 0x01);
+
+			RT_TRACE(rtlpriv, COMP_RF, DBG_LOUD,
+				 ("20M RF 0x18 = 0x%x\n",
+				 rtlphy->rfreg_chnlval[rfpath]));
+		}
+
+		break;
+	case HT_CHANNEL_WIDTH_20_40:
+		for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) {
+			rtlphy->rfreg_chnlval[rfpath] =
+			    ((rtlphy->rfreg_chnlval[rfpath] & 0xfffff3ff));
+			rtl_set_rfreg(hw, rfpath, RF_CHNLBW, BIT(10) | BIT(11),
+				      0x00);
+			RT_TRACE(rtlpriv, COMP_RF, DBG_LOUD,
+				 ("40M RF 0x18 = 0x%x\n",
+				 rtlphy->rfreg_chnlval[rfpath]));
+		}
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("unknown bandwidth: %#X\n", bandwidth));
+		break;
+	}
+}
+
+void rtl92d_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
+				       u8 *ppowerlevel)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u32 tx_agc[2] = {0, 0}, tmpval;
+	bool turbo_scanoff = false;
+	u8 idx1, idx2;
+	u8 *ptr;
+
+	if (rtlefuse->eeprom_regulatory != 0)
+		turbo_scanoff = true;
+	if (mac->act_scanning == true) {
+		tx_agc[RF90_PATH_A] = 0x3f3f3f3f;
+		tx_agc[RF90_PATH_B] = 0x3f3f3f3f;
+		if (turbo_scanoff) {
+			for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+				tx_agc[idx1] = ppowerlevel[idx1] |
+				    (ppowerlevel[idx1] << 8) |
+				    (ppowerlevel[idx1] << 16) |
+				    (ppowerlevel[idx1] << 24);
+			}
+		}
+	} else {
+		for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+			tx_agc[idx1] = ppowerlevel[idx1] |
+			    (ppowerlevel[idx1] << 8) |
+			    (ppowerlevel[idx1] << 16) |
+			    (ppowerlevel[idx1] << 24);
+		}
+		if (rtlefuse->eeprom_regulatory == 0) {
+			tmpval = (rtlphy->mcs_txpwrlevel_origoffset[0][6]) +
+			    (rtlphy->mcs_txpwrlevel_origoffset[0][7] << 8);
+			tx_agc[RF90_PATH_A] += tmpval;
+			tmpval = (rtlphy->mcs_txpwrlevel_origoffset[0][14]) +
+			    (rtlphy->mcs_txpwrlevel_origoffset[0][15] << 24);
+			tx_agc[RF90_PATH_B] += tmpval;
+		}
+	}
+
+	for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+		ptr = (u8 *) (&(tx_agc[idx1]));
+		for (idx2 = 0; idx2 < 4; idx2++) {
+			if (*ptr > RF6052_MAX_TX_PWR)
+				*ptr = RF6052_MAX_TX_PWR;
+			ptr++;
+		}
+	}
+
+	tmpval = tx_agc[RF90_PATH_A] & 0xff;
+	rtl_set_bbreg(hw, RTXAGC_A_CCK1_MCS32, BMASKBYTE1, tmpval);
+	RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+		("CCK PWR 1M (rf-A) = 0x%x (reg 0x%x)\n", tmpval,
+		RTXAGC_A_CCK1_MCS32));
+	tmpval = tx_agc[RF90_PATH_A] >> 8;
+	rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval);
+	RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+		("CCK PWR 2~11M (rf-A) = 0x%x (reg 0x%x)\n", tmpval,
+		RTXAGC_B_CCK11_A_CCK2_11));
+	tmpval = tx_agc[RF90_PATH_B] >> 24;
+	rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, BMASKBYTE0, tmpval);
+	RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+		("CCK PWR 11M (rf-B) = 0x%x (reg 0x%x)\n", tmpval,
+		RTXAGC_B_CCK11_A_CCK2_11));
+	tmpval = tx_agc[RF90_PATH_B] & 0x00ffffff;
+	rtl_set_bbreg(hw, RTXAGC_B_CCK1_55_MCS32, 0xffffff00, tmpval);
+	RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+		("CCK PWR 1~5.5M (rf-B) = 0x%x (reg 0x%x)\n", tmpval,
+		RTXAGC_B_CCK1_55_MCS32));
+}
+
+static void _rtl92d_phy_get_power_base(struct ieee80211_hw *hw,
+				       u8 *ppowerlevel, u8 channel,
+				       u32 *ofdmbase, u32 *mcsbase)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u32 powerbase0, powerbase1;
+	u8 legacy_pwrdiff, ht20_pwrdiff;
+	u8 i, powerlevel[2];
+
+	for (i = 0; i < 2; i++) {
+		powerlevel[i] = ppowerlevel[i];
+		legacy_pwrdiff = rtlefuse->txpwr_legacyhtdiff[i][channel - 1];
+		powerbase0 = powerlevel[i] + legacy_pwrdiff;
+		powerbase0 = (powerbase0 << 24) | (powerbase0 << 16) |
+		    (powerbase0 << 8) | powerbase0;
+		*(ofdmbase + i) = powerbase0;
+		RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+			(" [OFDM power base index rf(%c) = 0x%x]\n",
+			((i == 0) ? 'A' : 'B'), *(ofdmbase + i)));
+	}
+
+	for (i = 0; i < 2; i++) {
+		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20) {
+			ht20_pwrdiff = rtlefuse->txpwr_ht20diff[i][channel - 1];
+			powerlevel[i] += ht20_pwrdiff;
+		}
+		powerbase1 = powerlevel[i];
+		powerbase1 = (powerbase1 << 24) | (powerbase1 << 16) |
+			     (powerbase1 << 8) | powerbase1;
+		*(mcsbase + i) = powerbase1;
+		RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+			(" [MCS power base index rf(%c) = 0x%x]\n",
+			((i == 0) ? 'A' : 'B'), *(mcsbase + i)));
+	}
+}
+
+static u8 _rtl92d_phy_get_chnlgroup_bypg(u8 chnlindex)
+{
+	u8 group;
+	u8 channel_info[59] = {
+		1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14,
+		36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58,
+		60, 62, 64, 100, 102, 104, 106, 108, 110, 112,
+		114, 116, 118, 120, 122, 124, 126, 128,	130, 132,
+		134, 136, 138, 140, 149, 151, 153, 155, 157, 159,
+		161, 163, 165
+	};
+
+	if (channel_info[chnlindex] <= 3)	/* Chanel 1-3 */
+		group = 0;
+	else if (channel_info[chnlindex] <= 9)	/* Channel 4-9 */
+		group = 1;
+	else if (channel_info[chnlindex] <= 14)	/* Channel 10-14 */
+		group = 2;
+	else if (channel_info[chnlindex] <= 64)
+		group = 6;
+	else if (channel_info[chnlindex] <= 140)
+		group = 7;
+	else
+		group = 8;
+	return group;
+}
+
+static void _rtl92d_get_txpower_writeval_by_regulatory(struct ieee80211_hw *hw,
+						       u8 channel, u8 index,
+						       u32 *powerbase0,
+						       u32 *powerbase1,
+						       u32 *p_outwriteval)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 i, chnlgroup = 0, pwr_diff_limit[4];
+	u32 writeval = 0, customer_limit, rf;
+
+	for (rf = 0; rf < 2; rf++) {
+		switch (rtlefuse->eeprom_regulatory) {
+		case 0:
+			chnlgroup = 0;
+			writeval = rtlphy->mcs_txpwrlevel_origoffset
+					[chnlgroup][index +
+					(rf ? 8 : 0)] + ((index < 2) ?
+					powerbase0[rf] :
+					powerbase1[rf]);
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR, ("RTK better "
+				"performance, writeval(%c) = 0x%x\n",
+				((rf == 0) ? 'A' : 'B'), writeval));
+			break;
+		case 1:
+			if (rtlphy->pwrgroup_cnt == 1)
+				chnlgroup = 0;
+			if (rtlphy->pwrgroup_cnt >= MAX_PG_GROUP) {
+				chnlgroup = _rtl92d_phy_get_chnlgroup_bypg(
+								channel - 1);
+				if (rtlphy->current_chan_bw ==
+				    HT_CHANNEL_WIDTH_20)
+					chnlgroup++;
+				else
+					chnlgroup += 4;
+				writeval = rtlphy->mcs_txpwrlevel_origoffset
+						[chnlgroup][index +
+						(rf ? 8 : 0)] + ((index < 2) ?
+						powerbase0[rf] :
+						powerbase1[rf]);
+				RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+					("Realtek regulatory, "
+					"20MHz, writeval(%c) = 0x%x\n",
+					((rf == 0) ? 'A' : 'B'),
+					writeval));
+			}
+			break;
+		case 2:
+			writeval = ((index < 2) ? powerbase0[rf] :
+				   powerbase1[rf]);
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR, ("Better regulatory, "
+				"writeval(%c) = 0x%x\n",
+				((rf == 0) ? 'A' : 'B'), writeval));
+			break;
+		case 3:
+			chnlgroup = 0;
+			if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+				RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+					("customer's limit, 40MHz rf(%c) = "
+					"0x%x\n", ((rf == 0) ? 'A' : 'B'),
+					rtlefuse->pwrgroup_ht40[rf]
+					[channel - 1]));
+			} else {
+				RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+					("customer's limit, 20MHz rf(%c) = "
+					"0x%x\n", ((rf == 0) ? 'A' : 'B'),
+					rtlefuse->pwrgroup_ht20[rf]
+					[channel - 1]));
+			}
+			for (i = 0; i < 4; i++) {
+				pwr_diff_limit[i] =
+					(u8)((rtlphy->mcs_txpwrlevel_origoffset
+					[chnlgroup][index + (rf ? 8 : 0)] &
+					(0x7f << (i * 8))) >> (i * 8));
+				if (rtlphy->current_chan_bw ==
+				    HT_CHANNEL_WIDTH_20_40) {
+					if (pwr_diff_limit[i] >
+					    rtlefuse->pwrgroup_ht40[rf]
+					   [channel - 1])
+						pwr_diff_limit[i] =
+							rtlefuse->pwrgroup_ht40
+							[rf][channel - 1];
+				} else {
+					if (pwr_diff_limit[i] >
+					    rtlefuse->pwrgroup_ht20[rf][
+						channel - 1])
+						pwr_diff_limit[i] =
+						   rtlefuse->pwrgroup_ht20[rf]
+						   [channel - 1];
+				}
+			}
+			customer_limit = (pwr_diff_limit[3] << 24) |
+					 (pwr_diff_limit[2] << 16) |
+					 (pwr_diff_limit[1] << 8) |
+					 (pwr_diff_limit[0]);
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+				("Customer's limit rf(%c) = 0x%x\n",
+				((rf == 0) ? 'A' : 'B'), customer_limit));
+			writeval = customer_limit + ((index < 2) ?
+				   powerbase0[rf] : powerbase1[rf]);
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+				("Customer, writeval rf(%c)= 0x%x\n",
+				((rf == 0) ? 'A' : 'B'), writeval));
+			break;
+		default:
+			chnlgroup = 0;
+			writeval = rtlphy->mcs_txpwrlevel_origoffset
+				   [chnlgroup][index +
+				   (rf ? 8 : 0)] + ((index < 2) ?
+				   powerbase0[rf] : powerbase1[rf]);
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+				("RTK better performance, writeval "
+				"rf(%c) = 0x%x\n",
+				((rf == 0) ? 'A' : 'B'), writeval));
+			break;
+		}
+		*(p_outwriteval + rf) = writeval;
+	}
+}
+
+static void _rtl92d_write_ofdm_power_reg(struct ieee80211_hw *hw,
+					 u8 index, u32 *pvalue)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	static u16 regoffset_a[6] = {
+		RTXAGC_A_RATE18_06, RTXAGC_A_RATE54_24,
+		RTXAGC_A_MCS03_MCS00, RTXAGC_A_MCS07_MCS04,
+		RTXAGC_A_MCS11_MCS08, RTXAGC_A_MCS15_MCS12
+	};
+	static u16 regoffset_b[6] = {
+		RTXAGC_B_RATE18_06, RTXAGC_B_RATE54_24,
+		RTXAGC_B_MCS03_MCS00, RTXAGC_B_MCS07_MCS04,
+		RTXAGC_B_MCS11_MCS08, RTXAGC_B_MCS15_MCS12
+	};
+	u8 i, rf, pwr_val[4];
+	u32 writeval;
+	u16 regoffset;
+
+	for (rf = 0; rf < 2; rf++) {
+		writeval = pvalue[rf];
+		for (i = 0; i < 4; i++) {
+			pwr_val[i] = (u8) ((writeval & (0x7f <<
+				     (i * 8))) >> (i * 8));
+			if (pwr_val[i] > RF6052_MAX_TX_PWR)
+				pwr_val[i] = RF6052_MAX_TX_PWR;
+		}
+		writeval = (pwr_val[3] << 24) | (pwr_val[2] << 16) |
+			   (pwr_val[1] << 8) | pwr_val[0];
+		if (rf == 0)
+			regoffset = regoffset_a[index];
+		else
+			regoffset = regoffset_b[index];
+		rtl_set_bbreg(hw, regoffset, BMASKDWORD, writeval);
+		RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+			("Set 0x%x = %08x\n", regoffset, writeval));
+		if (((get_rf_type(rtlphy) == RF_2T2R) &&
+		    (regoffset == RTXAGC_A_MCS15_MCS12 ||
+		    regoffset == RTXAGC_B_MCS15_MCS12)) ||
+		    ((get_rf_type(rtlphy) != RF_2T2R) &&
+		    (regoffset == RTXAGC_A_MCS07_MCS04 ||
+		    regoffset == RTXAGC_B_MCS07_MCS04))) {
+			writeval = pwr_val[3];
+			if (regoffset == RTXAGC_A_MCS15_MCS12 ||
+			    regoffset == RTXAGC_A_MCS07_MCS04)
+				regoffset = 0xc90;
+			if (regoffset == RTXAGC_B_MCS15_MCS12 ||
+			    regoffset == RTXAGC_B_MCS07_MCS04)
+				regoffset = 0xc98;
+			for (i = 0; i < 3; i++) {
+				if (i != 2)
+					writeval = (writeval > 8) ?
+						   (writeval - 8) : 0;
+				else
+					writeval = (writeval > 6) ?
+						   (writeval - 6) : 0;
+				rtl_write_byte(rtlpriv, (u32) (regoffset + i),
+					       (u8) writeval);
+			}
+		}
+	}
+}
+
+void rtl92d_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw,
+					u8 *ppowerlevel, u8 channel)
+{
+	u32 writeval[2], powerbase0[2], powerbase1[2];
+	u8 index;
+
+	_rtl92d_phy_get_power_base(hw, ppowerlevel, channel,
+			&powerbase0[0],	&powerbase1[0]);
+	for (index = 0; index < 6; index++) {
+		_rtl92d_get_txpower_writeval_by_regulatory(hw,
+				channel, index,	&powerbase0[0],
+				&powerbase1[0],	&writeval[0]);
+		_rtl92d_write_ofdm_power_reg(hw, index, &writeval[0]);
+	}
+}
+
+bool rtl92d_phy_enable_anotherphy(struct ieee80211_hw *hw, bool bmac0)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = &(rtlpriv->rtlhal);
+	u8 u1btmp;
+	u8 direct = bmac0 == true ? BIT(3) | BIT(2) : BIT(3);
+	u8 mac_reg = bmac0 == true ? REG_MAC1 : REG_MAC0;
+	u8 mac_on_bit = bmac0 == true ? MAC1_ON : MAC0_ON;
+	bool bresult = true; /* true: need to enable BB/RF power */
+
+	rtlhal->during_mac0init_radiob = false;
+	rtlhal->during_mac1init_radioa = false;
+	RT_TRACE(rtlpriv, COMP_RF, DBG_LOUD, ("===>\n"));
+	/* MAC0 Need PHY1 load radio_b.txt . Driver use DBI to write. */
+	u1btmp = rtl_read_byte(rtlpriv, mac_reg);
+	if (!(u1btmp & mac_on_bit)) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("enable BB & RF\n"));
+		/* Enable BB and RF power */
+		rtl92de_write_dword_dbi(hw, REG_SYS_ISO_CTRL,
+			rtl92de_read_dword_dbi(hw, REG_SYS_ISO_CTRL, direct) |
+				BIT(29) | BIT(16) | BIT(17), direct);
+	} else {
+		/* We think if MAC1 is ON,then radio_a.txt
+		 * and radio_b.txt has been load. */
+		bresult = false;
+	}
+	RT_TRACE(rtlpriv, COMP_RF, DBG_LOUD, ("<===\n"));
+	return bresult;
+
+}
+
+void rtl92d_phy_powerdown_anotherphy(struct ieee80211_hw *hw, bool bmac0)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = &(rtlpriv->rtlhal);
+	u8 u1btmp;
+	u8 direct = bmac0 == true ? BIT(3) | BIT(2) : BIT(3);
+	u8 mac_reg = bmac0 == true ? REG_MAC1 : REG_MAC0;
+	u8 mac_on_bit = bmac0 == true ? MAC1_ON : MAC0_ON;
+
+	rtlhal->during_mac0init_radiob = false;
+	rtlhal->during_mac1init_radioa = false;
+	RT_TRACE(rtlpriv, COMP_RF, DBG_LOUD, ("====>\n"));
+	/* check MAC0 enable or not again now, if
+	 * enabled, not power down radio A. */
+	u1btmp = rtl_read_byte(rtlpriv, mac_reg);
+	if (!(u1btmp & mac_on_bit)) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("power down\n"));
+		/* power down RF radio A according to YuNan's advice. */
+		rtl92de_write_dword_dbi(hw, RFPGA0_XA_LSSIPARAMETER,
+					0x00000000, direct);
+	}
+	RT_TRACE(rtlpriv, COMP_RF, DBG_LOUD, ("<====\n"));
+}
+
+bool rtl92d_phy_rf6052_config(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	bool rtstatus = true;
+	struct rtl_hal *rtlhal = &(rtlpriv->rtlhal);
+	u32 u4_regvalue = 0;
+	u8 rfpath;
+	struct bb_reg_def *pphyreg;
+	bool mac1_initradioa_first = false, mac0_initradiob_first = false;
+	bool need_pwrdown_radioa = false, need_pwrdown_radiob = false;
+	bool true_bpath = false;
+
+	if (rtlphy->rf_type == RF_1T1R)
+		rtlphy->num_total_rfpath = 1;
+	else
+		rtlphy->num_total_rfpath = 2;
+
+	/* Single phy mode: use radio_a radio_b config path_A path_B */
+	/* seperately by MAC0, and MAC1 needn't configure RF; */
+	/* Dual PHY mode:MAC0 use radio_a config 1st phy path_A, */
+	/* MAC1 use radio_b config 2nd PHY path_A. */
+	/* DMDP,MAC0 on G band,MAC1 on A band. */
+	if (rtlhal->macphymode == DUALMAC_DUALPHY) {
+		if (rtlhal->current_bandtype == BAND_ON_2_4G &&
+		    rtlhal->interfaceindex == 0) {
+			/* MAC0 needs PHY1 load radio_b.txt.
+			 * Driver use DBI to write. */
+			if (rtl92d_phy_enable_anotherphy(hw, true)) {
+				rtlphy->num_total_rfpath = 2;
+				mac0_initradiob_first = true;
+			} else {
+				/* We think if MAC1 is ON,then radio_a.txt and
+				 * radio_b.txt has been load. */
+				return rtstatus;
+			}
+		} else if (rtlhal->current_bandtype == BAND_ON_5G &&
+			   rtlhal->interfaceindex == 1) {
+			/* MAC1 needs PHY0 load radio_a.txt.
+			 * Driver use DBI to write. */
+			if (rtl92d_phy_enable_anotherphy(hw, false)) {
+				rtlphy->num_total_rfpath = 2;
+				mac1_initradioa_first = true;
+			} else {
+				/* We think if MAC0 is ON,then radio_a.txt and
+				 * radio_b.txt has been load. */
+				return rtstatus;
+			}
+		} else if (rtlhal->interfaceindex == 1) {
+			/* MAC0 enabled, only init radia B.   */
+			true_bpath = true;
+		}
+	}
+
+	for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) {
+		/* Mac1 use PHY0 write */
+		if (mac1_initradioa_first) {
+			if (rfpath == RF90_PATH_A) {
+				rtlhal->during_mac1init_radioa = true;
+				need_pwrdown_radioa = true;
+			} else if (rfpath == RF90_PATH_B) {
+				rtlhal->during_mac1init_radioa = false;
+				mac1_initradioa_first = false;
+				rfpath = RF90_PATH_A;
+				true_bpath = true;
+				rtlphy->num_total_rfpath = 1;
+			}
+		} else if (mac0_initradiob_first) {
+			/* Mac0 use PHY1 write */
+			if (rfpath == RF90_PATH_A)
+				rtlhal->during_mac0init_radiob = false;
+			if (rfpath == RF90_PATH_B) {
+				rtlhal->during_mac0init_radiob = true;
+				mac0_initradiob_first = false;
+				need_pwrdown_radiob = true;
+				rfpath = RF90_PATH_A;
+				true_bpath = true;
+				rtlphy->num_total_rfpath = 1;
+			}
+		}
+		pphyreg = &rtlphy->phyreg_def[rfpath];
+		switch (rfpath) {
+		case RF90_PATH_A:
+		case RF90_PATH_C:
+			u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs,
+						    BRFSI_RFENV);
+			break;
+		case RF90_PATH_B:
+		case RF90_PATH_D:
+			u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs,
+				BRFSI_RFENV << 16);
+			break;
+		}
+		rtl_set_bbreg(hw, pphyreg->rfintfe, BRFSI_RFENV << 16, 0x1);
+		udelay(1);
+		rtl_set_bbreg(hw, pphyreg->rfintfo, BRFSI_RFENV, 0x1);
+		udelay(1);
+		/* Set bit number of Address and Data for RF register */
+		/* Set 1 to 4 bits for 8255 */
+		rtl_set_bbreg(hw, pphyreg->rfhssi_para2,
+			      B3WIREADDRESSLENGTH, 0x0);
+		udelay(1);
+		/* Set 0 to 12  bits for 8255 */
+		rtl_set_bbreg(hw, pphyreg->rfhssi_para2, B3WIREDATALENGTH, 0x0);
+		udelay(1);
+		switch (rfpath) {
+		case RF90_PATH_A:
+			if (true_bpath == true)
+				rtstatus = rtl92d_phy_config_rf_with_headerfile(
+						hw, radiob_txt,
+						(enum radio_path)rfpath);
+			else
+				rtstatus = rtl92d_phy_config_rf_with_headerfile(
+					     hw, radioa_txt,
+					     (enum radio_path)rfpath);
+			break;
+		case RF90_PATH_B:
+			rtstatus =
+			    rtl92d_phy_config_rf_with_headerfile(hw, radiob_txt,
+						(enum radio_path) rfpath);
+			break;
+		case RF90_PATH_C:
+			break;
+		case RF90_PATH_D:
+			break;
+		}
+		switch (rfpath) {
+		case RF90_PATH_A:
+		case RF90_PATH_C:
+			rtl_set_bbreg(hw, pphyreg->rfintfs, BRFSI_RFENV,
+				      u4_regvalue);
+			break;
+		case RF90_PATH_B:
+		case RF90_PATH_D:
+			rtl_set_bbreg(hw, pphyreg->rfintfs, BRFSI_RFENV << 16,
+				      u4_regvalue);
+			break;
+		}
+		if (rtstatus != true) {
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+				("Radio[%d] Fail!!", rfpath));
+			goto phy_rf_cfg_fail;
+		}
+
+	}
+
+	/* check MAC0 enable or not again, if enabled,
+	 * not power down radio A. */
+	/* check MAC1 enable or not again, if enabled,
+	 * not power down radio B. */
+	if (need_pwrdown_radioa)
+		rtl92d_phy_powerdown_anotherphy(hw, false);
+	else if (need_pwrdown_radiob)
+		rtl92d_phy_powerdown_anotherphy(hw, true);
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, ("<---\n"));
+	return rtstatus;
+
+phy_rf_cfg_fail:
+	return rtstatus;
+}