iwlwifi: dynamically determine lib_ops

Having the pointer to lib_ops in the config
makes it impossible to split the driver into
different modules. Determine the ops based on
the device family enumeration to get rid of
the direct pointer.

Also move all the opmode specific code from
the iwl-[1256]000.c files into a new file
iwl-agn-devices.c so that the former only
have configuration data now.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 2 insertions, 217 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index f124ec697168..00da2520a4b7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -24,26 +24,11 @@
  *
  *****************************************************************************/
 
-#include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <net/mac80211.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
 #include <linux/stringify.h>
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-io.h"
-#include "iwl-agn.h"
-#include "iwl-agn-hw.h"
-#include "iwl-trans.h"
-#include "iwl-shared.h"
+#include "iwl-config.h"
 #include "iwl-cfg.h"
+#include "iwl-dev.h" /* still needed */
 
 /* Highest firmware API version supported */
 #define IWL6000_UCODE_API_MAX 6
@@ -71,200 +56,6 @@
 #define IWL6030_FW_PRE "iwlwifi-6000g2b-"
 #define IWL6030_MODULE_FIRMWARE(api) IWL6030_FW_PRE __stringify(api) ".ucode"
 
-static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
-{
-	/* want Celsius */
-	priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
-	priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
-}
-
-/* NIC configuration for 6000 series */
-static void iwl6000_nic_config(struct iwl_priv *priv)
-{
-	iwl_rf_config(priv);
-
-	switch (cfg(priv)->device_family) {
-	case IWL_DEVICE_FAMILY_6005:
-	case IWL_DEVICE_FAMILY_6030:
-	case IWL_DEVICE_FAMILY_6000:
-		break;
-	case IWL_DEVICE_FAMILY_6000i:
-		/* 2x2 IPA phy type */
-		iwl_write32(trans(priv), CSR_GP_DRIVER_REG,
-			     CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
-		break;
-	case IWL_DEVICE_FAMILY_6050:
-		/* Indicate calibration version to uCode. */
-		if (iwl_eeprom_calib_version(priv) >= 6)
-			iwl_set_bit(trans(priv), CSR_GP_DRIVER_REG,
-					CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
-		break;
-	case IWL_DEVICE_FAMILY_6150:
-		/* Indicate calibration version to uCode. */
-		if (iwl_eeprom_calib_version(priv) >= 6)
-			iwl_set_bit(trans(priv), CSR_GP_DRIVER_REG,
-					CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
-		iwl_set_bit(trans(priv), CSR_GP_DRIVER_REG,
-			    CSR_GP_DRIVER_REG_BIT_6050_1x2);
-		break;
-	default:
-		WARN_ON(1);
-	}
-}
-
-static const struct iwl_sensitivity_ranges iwl6000_sensitivity = {
-	.min_nrg_cck = 110,
-	.auto_corr_min_ofdm = 80,
-	.auto_corr_min_ofdm_mrc = 128,
-	.auto_corr_min_ofdm_x1 = 105,
-	.auto_corr_min_ofdm_mrc_x1 = 192,
-
-	.auto_corr_max_ofdm = 145,
-	.auto_corr_max_ofdm_mrc = 232,
-	.auto_corr_max_ofdm_x1 = 110,
-	.auto_corr_max_ofdm_mrc_x1 = 232,
-
-	.auto_corr_min_cck = 125,
-	.auto_corr_max_cck = 175,
-	.auto_corr_min_cck_mrc = 160,
-	.auto_corr_max_cck_mrc = 310,
-	.nrg_th_cck = 110,
-	.nrg_th_ofdm = 110,
-
-	.barker_corr_th_min = 190,
-	.barker_corr_th_min_mrc = 336,
-	.nrg_th_cca = 62,
-};
-
-static void iwl6000_hw_set_hw_params(struct iwl_priv *priv)
-{
-	priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
-					BIT(IEEE80211_BAND_5GHZ);
-
-	priv->hw_params.tx_chains_num =
-		num_of_ant(priv->hw_params.valid_tx_ant);
-	if (cfg(priv)->rx_with_siso_diversity)
-		priv->hw_params.rx_chains_num = 1;
-	else
-		priv->hw_params.rx_chains_num =
-			num_of_ant(priv->hw_params.valid_rx_ant);
-
-	iwl6000_set_ct_threshold(priv);
-
-	/* Set initial sensitivity parameters */
-	priv->hw_params.sens = &iwl6000_sensitivity;
-
-}
-
-static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
-				     struct ieee80211_channel_switch *ch_switch)
-{
-	/*
-	 * MULTI-FIXME
-	 * See iwlagn_mac_channel_switch.
-	 */
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-	struct iwl6000_channel_switch_cmd cmd;
-	const struct iwl_channel_info *ch_info;
-	u32 switch_time_in_usec, ucode_switch_time;
-	u16 ch;
-	u32 tsf_low;
-	u8 switch_count;
-	u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
-	struct ieee80211_vif *vif = ctx->vif;
-	struct iwl_host_cmd hcmd = {
-		.id = REPLY_CHANNEL_SWITCH,
-		.len = { sizeof(cmd), },
-		.flags = CMD_SYNC,
-		.data = { &cmd, },
-	};
-
-	cmd.band = priv->band == IEEE80211_BAND_2GHZ;
-	ch = ch_switch->channel->hw_value;
-	IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
-		      ctx->active.channel, ch);
-	cmd.channel = cpu_to_le16(ch);
-	cmd.rxon_flags = ctx->staging.flags;
-	cmd.rxon_filter_flags = ctx->staging.filter_flags;
-	switch_count = ch_switch->count;
-	tsf_low = ch_switch->timestamp & 0x0ffffffff;
-	/*
-	 * calculate the ucode channel switch time
-	 * adding TSF as one of the factor for when to switch
-	 */
-	if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
-		if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
-		    beacon_interval)) {
-			switch_count -= (priv->ucode_beacon_time -
-				tsf_low) / beacon_interval;
-		} else
-			switch_count = 0;
-	}
-	if (switch_count <= 1)
-		cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
-	else {
-		switch_time_in_usec =
-			vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
-		ucode_switch_time = iwl_usecs_to_beacons(priv,
-							 switch_time_in_usec,
-							 beacon_interval);
-		cmd.switch_time = iwl_add_beacon_time(priv,
-						      priv->ucode_beacon_time,
-						      ucode_switch_time,
-						      beacon_interval);
-	}
-	IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
-		      cmd.switch_time);
-	ch_info = iwl_get_channel_info(priv, priv->band, ch);
-	if (ch_info)
-		cmd.expect_beacon = is_channel_radar(ch_info);
-	else {
-		IWL_ERR(priv, "invalid channel switch from %u to %u\n",
-			ctx->active.channel, ch);
-		return -EFAULT;
-	}
-
-	return iwl_dvm_send_cmd(priv, &hcmd);
-}
-
-static struct iwl_lib_ops iwl6000_lib = {
-	.set_hw_params = iwl6000_hw_set_hw_params,
-	.set_channel_switch = iwl6000_hw_channel_switch,
-	.nic_config = iwl6000_nic_config,
-	.eeprom_ops = {
-		.regulatory_bands = {
-			EEPROM_REG_BAND_1_CHANNELS,
-			EEPROM_REG_BAND_2_CHANNELS,
-			EEPROM_REG_BAND_3_CHANNELS,
-			EEPROM_REG_BAND_4_CHANNELS,
-			EEPROM_REG_BAND_5_CHANNELS,
-			EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
-			EEPROM_REG_BAND_52_HT40_CHANNELS
-		},
-		.enhanced_txpower = true,
-	},
-	.temperature = iwlagn_temperature,
-};
-
-static struct iwl_lib_ops iwl6030_lib = {
-	.set_hw_params = iwl6000_hw_set_hw_params,
-	.set_channel_switch = iwl6000_hw_channel_switch,
-	.nic_config = iwl6000_nic_config,
-	.eeprom_ops = {
-		.regulatory_bands = {
-			EEPROM_REG_BAND_1_CHANNELS,
-			EEPROM_REG_BAND_2_CHANNELS,
-			EEPROM_REG_BAND_3_CHANNELS,
-			EEPROM_REG_BAND_4_CHANNELS,
-			EEPROM_REG_BAND_5_CHANNELS,
-			EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
-			EEPROM_REG_BAND_52_HT40_CHANNELS
-		},
-		.enhanced_txpower = true,
-	},
-	.temperature = iwlagn_temperature,
-};
-
 static const struct iwl_base_params iwl6000_base_params = {
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
 	.num_of_queues = IWLAGN_NUM_QUEUES,
@@ -337,7 +128,6 @@ static const struct iwl_bt_params iwl6000_bt_params = {
 	.max_data_size = IWL60_RTC_DATA_SIZE,			\
 	.eeprom_ver = EEPROM_6005_EEPROM_VERSION,		\
 	.eeprom_calib_ver = EEPROM_6005_TX_POWER_VERSION,	\
-	.lib = &iwl6000_lib,					\
 	.base_params = &iwl6000_g2_base_params,			\
 	.need_temp_offset_calib = true,				\
 	.led_mode = IWL_LED_RF_STATE
@@ -392,7 +182,6 @@ const struct iwl_cfg iwl6005_2agn_mow2_cfg = {
 	.max_data_size = IWL60_RTC_DATA_SIZE,			\
 	.eeprom_ver = EEPROM_6030_EEPROM_VERSION,		\
 	.eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION,	\
-	.lib = &iwl6030_lib,					\
 	.base_params = &iwl6000_g2_base_params,			\
 	.bt_params = &iwl6000_bt_params,			\
 	.need_temp_offset_calib = true,				\
@@ -466,7 +255,6 @@ const struct iwl_cfg iwl130_bg_cfg = {
 	.valid_rx_ant = ANT_BC,		/* .cfg overwrite */	\
 	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,		\
 	.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,	\
-	.lib = &iwl6000_lib,					\
 	.base_params = &iwl6000_base_params,			\
 	.led_mode = IWL_LED_BLINK
 
@@ -495,7 +283,6 @@ const struct iwl_cfg iwl6000i_2bg_cfg = {
 	.max_data_size = IWL60_RTC_DATA_SIZE,			\
 	.valid_tx_ant = ANT_AB,		/* .cfg overwrite */	\
 	.valid_rx_ant = ANT_AB,		/* .cfg overwrite */	\
-	.lib = &iwl6000_lib,					\
 	.eeprom_ver = EEPROM_6050_EEPROM_VERSION,		\
 	.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,	\
 	.base_params = &iwl6050_base_params,			\
@@ -520,7 +307,6 @@ const struct iwl_cfg iwl6050_2abg_cfg = {
 	.device_family = IWL_DEVICE_FAMILY_6150,		\
 	.max_inst_size = IWL60_RTC_INST_SIZE,			\
 	.max_data_size = IWL60_RTC_DATA_SIZE,			\
-	.lib = &iwl6000_lib,					\
 	.eeprom_ver = EEPROM_6150_EEPROM_VERSION,		\
 	.eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION,	\
 	.base_params = &iwl6050_base_params,			\
@@ -549,7 +335,6 @@ const struct iwl_cfg iwl6000_3agn_cfg = {
 	.max_data_size = IWL60_RTC_DATA_SIZE,
 	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
-	.lib = &iwl6000_lib,
 	.base_params = &iwl6000_base_params,
 	.ht_params = &iwl6000_ht_params,
 	.led_mode = IWL_LED_BLINK,