pcmcia: use pcmcia_loop_config in net pcmcia drivers

Use the config loop helper in (some) net pcmcia drivers.

CC: netdev@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

1 files changed, 108 insertions, 119 deletions

diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 3b4e55cf33cd..3d914dde5de0 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -532,145 +532,134 @@ static void prism2_detach(struct pcmcia_device *link)
 #define CS_CHECK(fn, ret) \
 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
-#define CFG_CHECK2(fn, retf) \
-do { int _ret = (retf); \
-if (_ret != 0) { \
-	PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", _ret); \
-	cs_error(link, fn, _ret); \
-	goto next_entry; \
-} \
-} while (0)
-
 
 /* run after a CARD_INSERTION event is received to configure the PCMCIA
  * socket and make the device available to the system */
+
+struct prism2_config_data {
+	cistpl_cftable_entry_t dflt;
+	config_info_t conf;
+};
+
+static int prism2_config_check(struct pcmcia_device *p_dev,
+			       cistpl_cftable_entry_t *cfg,
+			       void *priv_data)
+{
+	struct prism2_config_data *cfg_mem = priv_data;
+
+	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
+		cfg_mem->dflt = *cfg;
+	if (cfg->index == 0)
+		return -ENODEV;
+
+	p_dev->conf.ConfigIndex = cfg->index;
+	PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
+	       "(default 0x%02X)\n", cfg->index, cfg_mem->dflt.index);
+
+	/* Does this card need audio output? */
+	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+		p_dev->conf.Status = CCSR_AUDIO_ENA;
+	}
+
+	/* Use power settings for Vcc and Vpp if present */
+	/*  Note that the CIS values need to be rescaled */
+	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+		if (cfg_mem->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
+		    10000 && !ignore_cis_vcc) {
+			PDEBUG(DEBUG_EXTRA, "  Vcc mismatch - skipping"
+			       " this entry\n");
+			return -ENODEV;
+		}
+	} else if (cfg_mem->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
+		if (cfg_mem->conf.Vcc != cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] /
+		    10000 && !ignore_cis_vcc) {
+			PDEBUG(DEBUG_EXTRA, "  Vcc (default) mismatch "
+			       "- skipping this entry\n");
+			return -ENODEV;
+		}
+	}
+
+	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+	else if (cfg_mem->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp = cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+	/* Do we need to allocate an interrupt? */
+	if (cfg->irq.IRQInfo1 || cfg_mem->dflt.irq.IRQInfo1)
+		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	else if (!(p_dev->conf.Attributes & CONF_ENABLE_IRQ)) {
+		/* At least Compaq WL200 does not have IRQInfo1 set,
+		 * but it does not work without interrupts.. */
+		printk(KERN_WARNING "Config has no IRQ info, but trying to "
+		       "enable IRQ anyway..\n");
+		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	}
+
+	/* IO window settings */
+	PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
+	       "cfg_mem->dflt.io.nwin=%d\n",
+	       cfg->io.nwin, cfg_mem->dflt.io.nwin);
+	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+		PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
+		       "io.base=0x%04x, len=%d\n", io->flags,
+		       io->win[0].base, io->win[0].len);
+		if (!(io->flags & CISTPL_IO_8BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+		if (!(io->flags & CISTPL_IO_16BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		p_dev->io.IOAddrLines = io->flags &
+			CISTPL_IO_LINES_MASK;
+		p_dev->io.BasePort1 = io->win[0].base;
+		p_dev->io.NumPorts1 = io->win[0].len;
+		if (io->nwin > 1) {
+			p_dev->io.Attributes2 = p_dev->io.Attributes1;
+			p_dev->io.BasePort2 = io->win[1].base;
+			p_dev->io.NumPorts2 = io->win[1].len;
+		}
+	}
+
+	/* This reserves IO space but doesn't actually enable it */
+	return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
 static int prism2_config(struct pcmcia_device *link)
 {
 	struct net_device *dev;
 	struct hostap_interface *iface;
+	struct prism2_config_data *cfg_mem;
 	local_info_t *local;
 	int ret = 1;
-	tuple_t tuple;
-	cisparse_t *parse;
 	int last_fn, last_ret;
-	u_char buf[64];
-	config_info_t conf;
-	cistpl_cftable_entry_t dflt = { 0 };
 	struct hostap_cs_priv *hw_priv;
 
 	PDEBUG(DEBUG_FLOW, "prism2_config()\n");
 
-	parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL);
+	cfg_mem = kzalloc(sizeof(struct prism2_config_data), GFP_KERNEL);
+	if (!cfg_mem)
+		return -ENOMEM;
+
 	hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL);
-	if (parse == NULL || hw_priv == NULL) {
+	if (hw_priv == NULL) {
 		ret = -ENOMEM;
 		goto failed;
 	}
 
-	tuple.Attributes = 0;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
-
 	CS_CHECK(GetConfigurationInfo,
-		 pcmcia_get_configuration_info(link, &conf));
+		 pcmcia_get_configuration_info(link, &cfg_mem->conf));
 
 	/* Look for an appropriate configuration table entry in the CIS */
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-	for (;;) {
-		cistpl_cftable_entry_t *cfg = &(parse->cftable_entry);
-		CFG_CHECK2(GetTupleData,
-			   pcmcia_get_tuple_data(link, &tuple));
-		CFG_CHECK2(ParseTuple,
-			   pcmcia_parse_tuple(link, &tuple, parse));
-
-		if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-			dflt = *cfg;
-		if (cfg->index == 0)
-			goto next_entry;
-		link->conf.ConfigIndex = cfg->index;
-		PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
-		       "(default 0x%02X)\n", cfg->index, dflt.index);
-
-		/* Does this card need audio output? */
-		if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-			link->conf.Attributes |= CONF_ENABLE_SPKR;
-			link->conf.Status = CCSR_AUDIO_ENA;
-		}
-
-		/* Use power settings for Vcc and Vpp if present */
-		/*  Note that the CIS values need to be rescaled */
-		if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
-			    10000 && !ignore_cis_vcc) {
-				PDEBUG(DEBUG_EXTRA, "  Vcc mismatch - skipping"
-				       " this entry\n");
-				goto next_entry;
-			}
-		} else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] /
-			    10000 && !ignore_cis_vcc) {
-				PDEBUG(DEBUG_EXTRA, "  Vcc (default) mismatch "
-				       "- skipping this entry\n");
-				goto next_entry;
-			}
-		}
-
-		if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-			link->conf.Vpp =
-				cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-		else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
-			link->conf.Vpp =
-				dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
-		/* Do we need to allocate an interrupt? */
-		if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
-			link->conf.Attributes |= CONF_ENABLE_IRQ;
-		else if (!(link->conf.Attributes & CONF_ENABLE_IRQ)) {
-			/* At least Compaq WL200 does not have IRQInfo1 set,
-			 * but it does not work without interrupts.. */
-			printk("Config has no IRQ info, but trying to enable "
-			       "IRQ anyway..\n");
-			link->conf.Attributes |= CONF_ENABLE_IRQ;
-		}
-
-		/* IO window settings */
-		PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
-		       "dflt.io.nwin=%d\n",
-		       cfg->io.nwin, dflt.io.nwin);
-		link->io.NumPorts1 = link->io.NumPorts2 = 0;
-		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-			link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-			PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
-			       "io.base=0x%04x, len=%d\n", io->flags,
-			       io->win[0].base, io->win[0].len);
-			if (!(io->flags & CISTPL_IO_8BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-			if (!(io->flags & CISTPL_IO_16BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-			link->io.IOAddrLines = io->flags &
-				CISTPL_IO_LINES_MASK;
-			link->io.BasePort1 = io->win[0].base;
-			link->io.NumPorts1 = io->win[0].len;
-			if (io->nwin > 1) {
-				link->io.Attributes2 = link->io.Attributes1;
-				link->io.BasePort2 = io->win[1].base;
-				link->io.NumPorts2 = io->win[1].len;
-			}
-		}
-
-		/* This reserves IO space but doesn't actually enable it */
-		CFG_CHECK2(RequestIO,
-			   pcmcia_request_io(link, &link->io));
-
-		/* This configuration table entry is OK */
-		break;
-
-	next_entry:
-		CS_CHECK(GetNextTuple,
-			 pcmcia_get_next_tuple(link, &tuple));
+	last_ret = pcmcia_loop_config(link, prism2_config_check, cfg_mem);
+	if (last_ret) {
+		if (!ignore_cis_vcc)
+			printk(KERN_ERR "GetNextTuple(): No matching "
+			       "CIS configuration.  Maybe you need the "
+			       "ignore_cis_vcc=1 parameter.\n");
+		cs_error(link, RequestIO, last_ret);
+		goto failed;
 	}
 
 	/* Need to allocate net_device before requesting IRQ handler */
@@ -738,15 +727,15 @@ static int prism2_config(struct pcmcia_device *link)
 		if (ret == 0 && local->ddev)
 			strcpy(hw_priv->node.dev_name, local->ddev->name);
 	}
-	kfree(parse);
+	kfree(cfg_mem);
 	return ret;
 
  cs_failed:
 	cs_error(link, last_fn, last_ret);
 
  failed:
-	kfree(parse);
 	kfree(hw_priv);
+	kfree(cfg_mem);
 	prism2_release((u_long)link);
 	return ret;
 }