wireless: add new wil6210 802.11ad 60GHz driver

This adds support for the 60 GHz 802.11ad Wilocity card
through a new driver, wil6210. Wilocity implemented the
firmware, QCA maintains the device driver.

Currently supported:

- STA: with security
- AP: limited to 1 connected STA, security disabled
- Monitor: due to a hardware/firmware limitation
  either control or non-control frames are monitored

Using a STA and AP with this drive, one can assemble
a fully functional BSS. Throughput of 1.2Gbps is achieved
with iperf.

The wil6210 cards have on-board flash memory for the
firmware, the cards comes pre-flashed and no firmware
download is required.

For more details see:

http://wireless.kernel.org/en/users/Drivers/wil6210

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 157 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c
new file mode 100644
index 000000000000..3068b5cb53a7
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/netdev.c
@@ -0,0 +1,157 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/slab.h>
+
+#include "wil6210.h"
+
+static int wil_open(struct net_device *ndev)
+{
+	struct wil6210_priv *wil = ndev_to_wil(ndev);
+
+	return wil_up(wil);
+}
+
+static int wil_stop(struct net_device *ndev)
+{
+	struct wil6210_priv *wil = ndev_to_wil(ndev);
+
+	return wil_down(wil);
+}
+
+/*
+ * AC to queue mapping
+ *
+ * AC_VO -> queue 3
+ * AC_VI -> queue 2
+ * AC_BE -> queue 1
+ * AC_BK -> queue 0
+ */
+static u16 wil_select_queue(struct net_device *ndev, struct sk_buff *skb)
+{
+	static const u16 wil_1d_to_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 };
+	struct wil6210_priv *wil = ndev_to_wil(ndev);
+	u16 rc;
+
+	skb->priority = cfg80211_classify8021d(skb);
+
+	rc = wil_1d_to_queue[skb->priority];
+
+	wil_dbg_TXRX(wil, "%s() %d -> %d\n", __func__, (int)skb->priority,
+		     (int)rc);
+
+	return rc;
+}
+
+static const struct net_device_ops wil_netdev_ops = {
+	.ndo_open		= wil_open,
+	.ndo_stop		= wil_stop,
+	.ndo_start_xmit		= wil_start_xmit,
+	.ndo_select_queue	= wil_select_queue,
+	.ndo_set_mac_address    = eth_mac_addr,
+	.ndo_validate_addr      = eth_validate_addr,
+};
+
+void *wil_if_alloc(struct device *dev, void __iomem *csr)
+{
+	struct net_device *ndev;
+	struct wireless_dev *wdev;
+	struct wil6210_priv *wil;
+	struct ieee80211_channel *ch;
+	int rc = 0;
+
+	wdev = wil_cfg80211_init(dev);
+	if (IS_ERR(wdev)) {
+		dev_err(dev, "wil_cfg80211_init failed\n");
+		return wdev;
+	}
+
+	wil = wdev_to_wil(wdev);
+	wil->csr = csr;
+	wil->wdev = wdev;
+
+	rc = wil_priv_init(wil);
+	if (rc) {
+		dev_err(dev, "wil_priv_init failed\n");
+		goto out_wdev;
+	}
+
+	wdev->iftype = NL80211_IFTYPE_STATION; /* TODO */
+	/* default monitor channel */
+	ch = wdev->wiphy->bands[IEEE80211_BAND_60GHZ]->channels;
+	cfg80211_chandef_create(&wdev->preset_chandef, ch, NL80211_CHAN_NO_HT);
+
+	ndev = alloc_netdev_mqs(0, "wlan%d", ether_setup, WIL6210_TX_QUEUES, 1);
+	if (!ndev) {
+		dev_err(dev, "alloc_netdev_mqs failed\n");
+		rc = -ENOMEM;
+		goto out_priv;
+	}
+
+	ndev->netdev_ops = &wil_netdev_ops;
+	ndev->ieee80211_ptr = wdev;
+	SET_NETDEV_DEV(ndev, wiphy_dev(wdev->wiphy));
+	wdev->netdev = ndev;
+
+	wil_link_off(wil);
+
+	return wil;
+
+ out_priv:
+	wil_priv_deinit(wil);
+
+ out_wdev:
+	wil_wdev_free(wil);
+
+	return ERR_PTR(rc);
+}
+
+void wil_if_free(struct wil6210_priv *wil)
+{
+	struct net_device *ndev = wil_to_ndev(wil);
+	if (!ndev)
+		return;
+
+	free_netdev(ndev);
+	wil_priv_deinit(wil);
+	wil_wdev_free(wil);
+}
+
+int wil_if_add(struct wil6210_priv *wil)
+{
+	struct net_device *ndev = wil_to_ndev(wil);
+	int rc;
+
+	rc = register_netdev(ndev);
+	if (rc < 0) {
+		dev_err(&ndev->dev, "Failed to register netdev: %d\n", rc);
+		return rc;
+	}
+
+	wil_link_off(wil);
+
+	return 0;
+}
+
+void wil_if_remove(struct wil6210_priv *wil)
+{
+	struct net_device *ndev = wil_to_ndev(wil);
+
+	unregister_netdev(ndev);
+}