summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath9k/ar9003_phy.c
diff options
context:
space:
mode:
authorMohammed Shafi Shajakhan <mshajakhan@atheros.com>2010-11-23 20:42:27 +0530
committerJohn W. Linville <linville@tuxdriver.com>2010-11-30 13:49:13 -0500
commitea066d5a91f2610116dcd27054f749e4f07799d8 (patch)
tree451eb5ad15da0cf8c401dded725fe0f3838beb48 /drivers/net/wireless/ath/ath9k/ar9003_phy.c
parentdd318575ff0aae91ac4cbcc5b60c184e59267212 (diff)
downloadblackbird-op-linux-ea066d5a91f2610116dcd27054f749e4f07799d8.tar.gz
blackbird-op-linux-ea066d5a91f2610116dcd27054f749e4f07799d8.zip
ath9k: Add support for Adaptive Power Management
This feature is to mitigate the problem of certain 3 stream chips that exceed the PCIe power requirements.An EEPROM flag controls which chips have APM enabled which is basically read from miscellaneous configuration element of the EEPROM header. This workaround will reduce power consumption by using 2 Tx chains for Single and Double stream rates (5 GHz only).All self generated frames (regardless of rate) are sent on 2 chains when this feature is enabled(Chip Limitation). Cc: Paul Shaw <paul.shaw@atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Tested-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/ar9003_phy.c')
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9003_phy.c6
1 files changed, 5 insertions, 1 deletions
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 656d8ce251a7..b34a9e91edd8 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -487,7 +487,11 @@ void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx)
break;
}
- REG_WRITE(ah, AR_SELFGEN_MASK, tx);
+ if ((ah->caps.hw_caps & ATH9K_HW_CAP_APM) && (tx == 0x7))
+ REG_WRITE(ah, AR_SELFGEN_MASK, 0x3);
+ else
+ REG_WRITE(ah, AR_SELFGEN_MASK, tx);
+
if (tx == 0x5) {
REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP,
AR_PHY_SWAP_ALT_CHAIN);
OpenPOWER on IntegriCloud