ath9k_hw: clean up per-channel calibration data

The noise floor history buffer is currently not kept per channel, which
can lead to problems when changing channels from a clean channel to a
noisy one. Also when switching from HT20 to HT40, the noise floor
history buffer is full of measurements, but none of them contain data
for the extension channel, which it needs quite a bit of time to recover
from.

This patch puts all the per-channel calibration data into a single data
structure, and gives the the driver control over whether that is used
per-channel or even not used for some channels.

For ath9k_htc, I decided to keep this per-channel in order to avoid
creating regressions.

For ath9k, the data is kept only for the operating channel, which saves
some space. ath9k_hw takes care of wiping old data when the operating
channel or its channel flags change.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 5 insertions, 3 deletions

diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
index 2387ad1a23a0..d28a8d37f01f 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -63,6 +63,7 @@ static bool ar9002_hw_per_calibration(struct ath_hw *ah,
 				      u8 rxchainmask,
 				      struct ath9k_cal_list *currCal)
 {
+	struct ath9k_hw_cal_data *caldata = ah->caldata;
 	bool iscaldone = false;
 
 	if (currCal->calState == CAL_RUNNING) {
@@ -81,14 +82,14 @@ static bool ar9002_hw_per_calibration(struct ath_hw *ah,
 				}
 
 				currCal->calData->calPostProc(ah, numChains);
-				ichan->CalValid |= currCal->calData->calType;
+				caldata->CalValid |= currCal->calData->calType;
 				currCal->calState = CAL_DONE;
 				iscaldone = true;
 			} else {
 				ar9002_hw_setup_calibration(ah, currCal);
 			}
 		}
-	} else if (!(ichan->CalValid & currCal->calData->calType)) {
+	} else if (!(caldata->CalValid & currCal->calData->calType)) {
 		ath9k_hw_reset_calibration(ah, currCal);
 	}
 
@@ -900,7 +901,8 @@ static bool ar9002_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
 			ath9k_hw_reset_calibration(ah, ah->cal_list_curr);
 	}
 
-	chan->CalValid = 0;
+	if (ah->caldata)
+		ah->caldata->CalValid = 0;
 
 	return true;
 }