Merge tag 'staging-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging tree changes from Greg Kroah-Hartman:
 "Here is the big staging tree pull request for the 3.5-rc1 merge
  window.

  Loads of changes here, and we just narrowly added more lines than we
  added:
   622 files changed, 28356 insertions(+), 26059 deletions(-)

  But, good news is that there is a number of subsystems that moved out
  of the staging tree, to their respective "real" portions of the
  kernel.

  Code that moved out was:
	- iio core code
	- mei driver
	- vme core and bridge drivers

  There was one broken network driver that moved into staging as a step
  before it is removed from the tree (pc300), and there was a few new
  drivers added to the tree:
	- new iio drivers
	- gdm72xx wimax USB driver
	- ipack subsystem and 2 drivers

  All of the movements around have acks from the various subsystem
  maintainers, and all of this has been in the linux-next tree for a
  while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up various trivial conflicts, along with a non-trivial one found
in -next and pointed out by Olof Johanssen: a clean - but incorrect -
merge of the arch/arm/boot/dts/at91sam9g20.dtsi file.  Fix up manually
as per Stephen Rothwell.

* tag 'staging-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (536 commits)
  Staging: bcm: Remove two unused variables from Adapter.h
  Staging: bcm: Removes the volatile type definition from Adapter.h
  Staging: bcm: Rename all "INT" to "int" in Adapter.h
  Staging: bcm: Fix warning: __packed vs. __attribute__((packed)) in Adapter.h
  Staging: bcm: Correctly format all comments in Adapter.h
  Staging: bcm: Fix all whitespace issues in Adapter.h
  Staging: bcm: Properly format braces in Adapter.h
  Staging: ipack/bridges/tpci200: remove unneeded casts
  Staging: ipack/bridges/tpci200: remove TPCI200_SHORTNAME constant
  Staging: ipack: remove board_name and bus_name fields from struct ipack_device
  Staging: ipack: improve the register of a bus and a device in the bus.
  staging: comedi: cleanup all the comedi_driver 'detach' functions
  staging: comedi: remove all 'default N' in Kconfig
  staging: line6/config.h: Delete unused header
  staging: gdm72xx depends on NET
  staging: gdm72xx: Set up parent link in sysfs for gdm72xx devices
  staging: drm/omap: initial dmabuf/prime import support
  staging: drm/omap: dmabuf/prime mmap support
  pstore/ram: Add ECC support
  pstore/ram: Switch to persistent_ram routines
  ...

6 files changed, 0 insertions, 6459 deletions

diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index d70ede7a7f96..d58431e99f73 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -203,37 +203,6 @@ config WANXL_BUILD_FIRMWARE
 
 	  You should never need this option, say N.
 
-config PC300
-	tristate "Cyclades-PC300 support (RS-232/V.35, X.21, T1/E1 boards)"
-	depends on HDLC && PCI && BROKEN
-	---help---
-	  This driver is broken because of struct tty_driver change.
-
-	  Driver for the Cyclades-PC300 synchronous communication boards.
-
-	  These boards provide synchronous serial interfaces to your
-	  Linux box (interfaces currently available are RS-232/V.35, X.21 and
-	  T1/E1). If you wish to support Multilink PPP, please select the
-	  option later and read the file README.mlppp provided by PC300
-	  package.
-
-	  To compile this as a module, choose M here: the module
-	  will be called pc300.
-
-	  If unsure, say N.
-
-config PC300_MLPPP
-	bool "Cyclades-PC300 MLPPP support"
-	depends on PC300 && PPP_MULTILINK && PPP_SYNC_TTY && HDLC_PPP
-	help
-	  Multilink PPP over the PC300 synchronous communication boards.
-
-comment "Cyclades-PC300 MLPPP support is disabled."
-	depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
-
-comment "Refer to the file README.mlppp, provided by PC300 package."
-	depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
-
 config PC300TOO
 	tristate "Cyclades PC300 RSV/X21 alternative support"
 	depends on HDLC && PCI
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index 19d14bc28356..eac709bed7ae 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -17,10 +17,6 @@ obj-$(CONFIG_HDLC_FR)		+= hdlc_fr.o
 obj-$(CONFIG_HDLC_PPP)		+= hdlc_ppp.o
 obj-$(CONFIG_HDLC_X25)		+= hdlc_x25.o
 
-pc300-y				:= pc300_drv.o
-pc300-$(CONFIG_PC300_MLPPP)	+= pc300_tty.o
-pc300-objs			:= $(pc300-y)
-
 obj-$(CONFIG_HOSTESS_SV11)	+= z85230.o	hostess_sv11.o
 obj-$(CONFIG_SEALEVEL_4021)	+= z85230.o	sealevel.o
 obj-$(CONFIG_COSA)		+= cosa.o
@@ -35,7 +31,6 @@ obj-$(CONFIG_SDLA)		+= sdla.o
 obj-$(CONFIG_CYCLADES_SYNC)	+= cycx_drv.o cyclomx.o
 obj-$(CONFIG_LAPBETHER)		+= lapbether.o
 obj-$(CONFIG_SBNI)		+= sbni.o
-obj-$(CONFIG_PC300)		+= pc300.o
 obj-$(CONFIG_N2)		+= n2.o
 obj-$(CONFIG_C101)		+= c101.o
 obj-$(CONFIG_WANXL)		+= wanxl.o
diff --git a/drivers/net/wan/pc300-falc-lh.h b/drivers/net/wan/pc300-falc-lh.h
deleted file mode 100644
index 01ed23ca76c7..000000000000
--- a/drivers/net/wan/pc300-falc-lh.h
+++ /dev/null
@@ -1,1238 +0,0 @@
-/*
- * falc.h	Description of the Siemens FALC T1/E1 framer.
- *
- * Author:	Ivan Passos <ivan@cyclades.com>
- *
- * Copyright:	(c) 2000-2001 Cyclades Corp.
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *
- * $Log: falc-lh.h,v $
- * Revision 3.1  2001/06/15 12:41:10  regina
- * upping major version number
- *
- * Revision 1.1.1.1  2001/06/13 20:24:47  daniela
- * PC300 initial CVS version (3.4.0-pre1)
- *
- * Revision 1.1 2000/05/15 ivan
- * Included DJA bits for the LIM2 register.
- *
- * Revision 1.0 2000/02/22 ivan
- * Initial version.
- *
- */
-
-#ifndef _FALC_LH_H
-#define _FALC_LH_H
-
-#define NUM_OF_T1_CHANNELS	24
-#define NUM_OF_E1_CHANNELS	32
-
-/*>>>>>>>>>>>>>>>>>  FALC Register Bits (Transmit Mode)  <<<<<<<<<<<<<<<<<<< */
-
-/* CMDR (Command Register)
-   ---------------- E1 & T1 ------------------------------ */
-#define CMDR_RMC	0x80
-#define CMDR_RRES	0x40
-#define CMDR_XREP	0x20
-#define CMDR_XRES	0x10
-#define CMDR_XHF	0x08
-#define CMDR_XTF	0x04
-#define CMDR_XME	0x02
-#define CMDR_SRES	0x01
-
-/* MODE (Mode Register)
-   ----------------- E1 & T1 ----------------------------- */
-#define MODE_MDS2	0x80
-#define MODE_MDS1	0x40
-#define MODE_MDS0	0x20
-#define MODE_BRAC	0x10
-#define MODE_HRAC	0x08
-
-/* IPC (Interrupt Port Configuration)
-   ----------------- E1 & T1 ----------------------------- */
-#define IPC_VIS		0x80
-#define IPC_SCI		0x04
-#define IPC_IC1		0x02
-#define IPC_IC0		0x01
-
-/* CCR1 (Common Configuration Register 1)
-   ----------------- E1 & T1 ----------------------------- */
-#define CCR1_SFLG       0x80
-#define CCR1_XTS16RA    0x40
-#define CCR1_BRM        0x40
-#define CCR1_CASSYM     0x20
-#define CCR1_EDLX       0x20
-#define CCR1_EITS       0x10
-#define CCR1_ITF        0x08
-#define CCR1_RFT1       0x02
-#define CCR1_RFT0       0x01
-
-/* CCR3 (Common Configuration Register 3)
-   ---------------- E1 & T1 ------------------------------ */
-
-#define CCR3_PRE1       0x80
-#define CCR3_PRE0       0x40
-#define CCR3_EPT        0x20
-#define CCR3_RADD       0x10
-#define CCR3_RCRC       0x04
-#define CCR3_XCRC       0x02
-
-
-/* RTR1-4 (Receive Timeslot Register 1-4)
-   ---------------- E1 & T1 ------------------------------ */
-
-#define RTR1_TS0        0x80
-#define RTR1_TS1        0x40
-#define RTR1_TS2        0x20
-#define RTR1_TS3        0x10
-#define RTR1_TS4        0x08
-#define RTR1_TS5        0x04
-#define RTR1_TS6        0x02
-#define RTR1_TS7        0x01
-
-#define RTR2_TS8        0x80
-#define RTR2_TS9        0x40
-#define RTR2_TS10       0x20
-#define RTR2_TS11       0x10
-#define RTR2_TS12       0x08
-#define RTR2_TS13       0x04
-#define RTR2_TS14       0x02
-#define RTR2_TS15       0x01
-
-#define RTR3_TS16       0x80
-#define RTR3_TS17       0x40
-#define RTR3_TS18       0x20
-#define RTR3_TS19       0x10
-#define RTR3_TS20       0x08
-#define RTR3_TS21       0x04
-#define RTR3_TS22       0x02
-#define RTR3_TS23       0x01
-
-#define RTR4_TS24       0x80
-#define RTR4_TS25       0x40
-#define RTR4_TS26       0x20
-#define RTR4_TS27       0x10
-#define RTR4_TS28       0x08
-#define RTR4_TS29       0x04
-#define RTR4_TS30       0x02
-#define RTR4_TS31       0x01
-
-
-/* TTR1-4 (Transmit Timeslot Register 1-4)
-   ---------------- E1 & T1 ------------------------------ */
-
-#define TTR1_TS0        0x80
-#define TTR1_TS1        0x40
-#define TTR1_TS2        0x20
-#define TTR1_TS3        0x10
-#define TTR1_TS4        0x08
-#define TTR1_TS5        0x04
-#define TTR1_TS6        0x02
-#define TTR1_TS7        0x01
-
-#define TTR2_TS8        0x80
-#define TTR2_TS9        0x40
-#define TTR2_TS10       0x20
-#define TTR2_TS11       0x10
-#define TTR2_TS12       0x08
-#define TTR2_TS13       0x04
-#define TTR2_TS14       0x02
-#define TTR2_TS15       0x01
-
-#define TTR3_TS16       0x80
-#define TTR3_TS17       0x40
-#define TTR3_TS18       0x20
-#define TTR3_TS19       0x10
-#define TTR3_TS20       0x08
-#define TTR3_TS21       0x04
-#define TTR3_TS22       0x02
-#define TTR3_TS23       0x01
-
-#define TTR4_TS24       0x80
-#define TTR4_TS25       0x40
-#define TTR4_TS26       0x20
-#define TTR4_TS27       0x10
-#define TTR4_TS28       0x08
-#define TTR4_TS29       0x04
-#define TTR4_TS30       0x02
-#define TTR4_TS31       0x01
-
-
-
-/* IMR0-4 (Interrupt Mask Register 0-4)
-
-   ----------------- E1 & T1 ----------------------------- */
-
-#define IMR0_RME        0x80
-#define IMR0_RFS        0x40
-#define IMR0_T8MS       0x20
-#define IMR0_ISF        0x20
-#define IMR0_RMB        0x10
-#define IMR0_CASC       0x08
-#define IMR0_RSC        0x08
-#define IMR0_CRC6       0x04
-#define IMR0_CRC4       0x04
-#define IMR0_PDEN	0x02
-#define IMR0_RPF        0x01
-
-#define IMR1_CASE       0x80
-#define IMR1_RDO        0x40
-#define IMR1_ALLS       0x20
-#define IMR1_XDU        0x10
-#define IMR1_XMB        0x08
-#define IMR1_XLSC       0x02
-#define IMR1_XPR        0x01
-#define IMR1_LLBSC	0x80
-
-#define IMR2_FAR        0x80
-#define IMR2_LFA        0x40
-#define IMR2_MFAR       0x20
-#define IMR2_T400MS     0x10
-#define IMR2_LMFA       0x10
-#define IMR2_AIS        0x08
-#define IMR2_LOS        0x04
-#define IMR2_RAR        0x02
-#define IMR2_RA         0x01
-
-#define IMR3_ES         0x80
-#define IMR3_SEC        0x40
-#define IMR3_LMFA16     0x20
-#define IMR3_AIS16      0x10
-#define IMR3_RA16       0x08
-#define IMR3_API        0x04
-#define IMR3_XSLP       0x20
-#define IMR3_XSLN       0x10
-#define IMR3_LLBSC      0x08
-#define IMR3_XRS        0x04
-#define IMR3_SLN        0x02
-#define IMR3_SLP        0x01
-
-#define IMR4_LFA        0x80
-#define IMR4_FER        0x40
-#define IMR4_CER        0x20
-#define IMR4_AIS        0x10
-#define IMR4_LOS        0x08
-#define IMR4_CVE        0x04
-#define IMR4_SLIP       0x02
-#define IMR4_EBE        0x01
-
-/* FMR0-5 for E1 and T1  (Framer Mode Register ) */
-
-#define FMR0_XC1        0x80
-#define FMR0_XC0        0x40
-#define FMR0_RC1        0x20
-#define FMR0_RC0        0x10
-#define FMR0_EXTD       0x08
-#define FMR0_ALM        0x04
-#define E1_FMR0_FRS     0x02
-#define T1_FMR0_FRS     0x08
-#define FMR0_SRAF       0x04
-#define FMR0_EXLS       0x02
-#define FMR0_SIM        0x01
-
-#define FMR1_MFCS       0x80
-#define FMR1_AFR        0x40
-#define FMR1_ENSA       0x20
-#define FMR1_CTM        0x80
-#define FMR1_SIGM       0x40
-#define FMR1_EDL        0x20
-#define FMR1_PMOD       0x10
-#define FMR1_XFS        0x08
-#define FMR1_CRC        0x08
-#define FMR1_ECM        0x04
-#define FMR1_IMOD       0x02
-#define FMR1_XAIS       0x01
-
-#define FMR2_RFS1       0x80
-#define FMR2_RFS0       0x40
-#define FMR2_MCSP	0x40
-#define FMR2_RTM        0x20
-#define FMR2_SSP        0x20
-#define FMR2_DAIS       0x10
-#define FMR2_SAIS       0x08
-#define FMR2_PLB        0x04
-#define FMR2_AXRA       0x02
-#define FMR2_ALMF       0x01
-#define FMR2_EXZE       0x01
-
-#define LOOP_RTM	0x40
-#define LOOP_SFM	0x40
-#define LOOP_ECLB	0x20
-#define LOOP_CLA	0x1f
-
-/*--------------------- E1 ----------------------------*/
-#define FMR3_XLD	0x20
-#define FMR3_XLU	0x10
-
-/*--------------------- T1 ----------------------------*/
-#define FMR4_AIS3       0x80
-#define FMR4_TM         0x40
-#define FMR4_XRA        0x20
-#define FMR4_SSC1       0x10
-#define FMR4_SSC0       0x08
-#define FMR4_AUTO       0x04
-#define FMR4_FM1        0x02
-#define FMR4_FM0        0x01
-
-#define FMR5_SRS        0x80
-#define FMR5_EIBR       0x40
-#define FMR5_XLD        0x20
-#define FMR5_XLU        0x10
-
-
-/* LOOP (Channel Loop Back)
-
-   ------------------ E1 & T1 ---------------------------- */
-
-#define LOOP_SFM        0x40
-#define LOOP_ECLB       0x20
-#define LOOP_CLA4       0x10
-#define LOOP_CLA3       0x08
-#define LOOP_CLA2       0x04
-#define LOOP_CLA1       0x02
-#define LOOP_CLA0       0x01
-
-
-
-/* XSW (Transmit Service Word Pulseframe)
-
-   ------------------- E1 --------------------------- */
-
-#define XSW_XSIS        0x80
-#define XSW_XTM         0x40
-#define XSW_XRA         0x20
-#define XSW_XY0         0x10
-#define XSW_XY1         0x08
-#define XSW_XY2         0x04
-#define XSW_XY3         0x02
-#define XSW_XY4         0x01
-
-
-/* XSP (Transmit Spare Bits)
-
-   ------------------- E1 --------------------------- */
-
-#define XSP_XAP         0x80
-#define XSP_CASEN       0x40
-#define XSP_TT0         0x20
-#define XSP_EBP         0x10
-#define XSP_AXS         0x08
-#define XSP_XSIF        0x04
-#define XSP_XS13        0x02
-#define XSP_XS15        0x01
-
-
-/* XC0/1 (Transmit Control 0/1)
-   ------------------ E1 & T1 ---------------------------- */
-
-#define XC0_SA8E        0x80
-#define XC0_SA7E        0x40
-#define XC0_SA6E        0x20
-#define XC0_SA5E        0x10
-#define XC0_SA4E        0x08
-#define XC0_BRM         0x80
-#define XC0_MFBS        0x40
-#define XC0_SFRZ        0x10
-#define XC0_XCO2        0x04
-#define XC0_XCO1        0x02
-#define XC0_XCO0        0x01
-
-#define XC1_XTO5        0x20
-#define XC1_XTO4        0x10
-#define XC1_XTO3        0x08
-#define XC1_XTO2        0x04
-#define XC1_XTO1        0x02
-#define XC1_XTO0        0x01
-
-
-/* RC0/1 (Receive Control 0/1)
-   ------------------ E1 & T1 ---------------------------- */
-
-#define RC0_SICS        0x40
-#define RC0_CRCI        0x20
-#define RC0_XCRCI       0x10
-#define RC0_RDIS        0x08
-#define RC0_RCO2        0x04
-#define RC0_RCO1        0x02
-#define RC0_RCO0        0x01
-
-#define RC1_SWD         0x80
-#define RC1_ASY4        0x40
-#define RC1_RRAM        0x40
-#define RC1_RTO5        0x20
-#define RC1_RTO4        0x10
-#define RC1_RTO3        0x08
-#define RC1_RTO2        0x04
-#define RC1_RTO1        0x02
-#define RC1_RTO0        0x01
-
-
-
-/* XPM0-2 (Transmit Pulse Mask 0-2)
-   --------------------- E1 & T1 ------------------------- */
-
-#define XPM0_XP12       0x80
-#define XPM0_XP11       0x40
-#define XPM0_XP10       0x20
-#define XPM0_XP04       0x10
-#define XPM0_XP03       0x08
-#define XPM0_XP02       0x04
-#define XPM0_XP01       0x02
-#define XPM0_XP00       0x01
-
-#define XPM1_XP30       0x80
-#define XPM1_XP24       0x40
-#define XPM1_XP23       0x20
-#define XPM1_XP22       0x10
-#define XPM1_XP21       0x08
-#define XPM1_XP20       0x04
-#define XPM1_XP14       0x02
-#define XPM1_XP13       0x01
-
-#define XPM2_XLHP       0x80
-#define XPM2_XLT        0x40
-#define XPM2_DAXLT      0x20
-#define XPM2_XP34       0x08
-#define XPM2_XP33       0x04
-#define XPM2_XP32       0x02
-#define XPM2_XP31       0x01
-
-
-/* TSWM (Transparent Service Word Mask)
-   ------------------ E1 ---------------------------- */
-
-#define TSWM_TSIS       0x80
-#define TSWM_TSIF       0x40
-#define TSWM_TRA        0x20
-#define TSWM_TSA4       0x10
-#define TSWM_TSA5       0x08
-#define TSWM_TSA6       0x04
-#define TSWM_TSA7       0x02
-#define TSWM_TSA8       0x01
-
-/* IDLE <Idle Channel Code Register>
-
-   ------------------ E1 & T1 ----------------------- */
-
-#define IDLE_IDL7       0x80
-#define IDLE_IDL6       0x40
-#define IDLE_IDL5       0x20
-#define IDLE_IDL4       0x10
-#define IDLE_IDL3       0x08
-#define IDLE_IDL2       0x04
-#define IDLE_IDL1       0x02
-#define IDLE_IDL0       0x01
-
-
-/* XSA4-8 <Transmit SA4-8 Register(Read/Write) >
-   -------------------E1 ----------------------------- */
-
-#define XSA4_XS47       0x80
-#define XSA4_XS46       0x40
-#define XSA4_XS45       0x20
-#define XSA4_XS44       0x10
-#define XSA4_XS43       0x08
-#define XSA4_XS42       0x04
-#define XSA4_XS41       0x02
-#define XSA4_XS40       0x01
-
-#define XSA5_XS57       0x80
-#define XSA5_XS56       0x40
-#define XSA5_XS55       0x20
-#define XSA5_XS54       0x10
-#define XSA5_XS53       0x08
-#define XSA5_XS52       0x04
-#define XSA5_XS51       0x02
-#define XSA5_XS50       0x01
-
-#define XSA6_XS67       0x80
-#define XSA6_XS66       0x40
-#define XSA6_XS65       0x20
-#define XSA6_XS64       0x10
-#define XSA6_XS63       0x08
-#define XSA6_XS62       0x04
-#define XSA6_XS61       0x02
-#define XSA6_XS60       0x01
-
-#define XSA7_XS77       0x80
-#define XSA7_XS76       0x40
-#define XSA7_XS75       0x20
-#define XSA7_XS74       0x10
-#define XSA7_XS73       0x08
-#define XSA7_XS72       0x04
-#define XSA7_XS71       0x02
-#define XSA7_XS70       0x01
-
-#define XSA8_XS87       0x80
-#define XSA8_XS86       0x40
-#define XSA8_XS85       0x20
-#define XSA8_XS84       0x10
-#define XSA8_XS83       0x08
-#define XSA8_XS82       0x04
-#define XSA8_XS81       0x02
-#define XSA8_XS80       0x01
-
-
-/* XDL1-3 (Transmit DL-Bit Register1-3 (read/write))
-   ----------------------- T1 --------------------- */
-
-#define XDL1_XDL17      0x80
-#define XDL1_XDL16      0x40
-#define XDL1_XDL15      0x20
-#define XDL1_XDL14      0x10
-#define XDL1_XDL13      0x08
-#define XDL1_XDL12      0x04
-#define XDL1_XDL11      0x02
-#define XDL1_XDL10      0x01
-
-#define XDL2_XDL27      0x80
-#define XDL2_XDL26      0x40
-#define XDL2_XDL25      0x20
-#define XDL2_XDL24      0x10
-#define XDL2_XDL23      0x08
-#define XDL2_XDL22      0x04
-#define XDL2_XDL21      0x02
-#define XDL2_XDL20      0x01
-
-#define XDL3_XDL37      0x80
-#define XDL3_XDL36      0x40
-#define XDL3_XDL35      0x20
-#define XDL3_XDL34      0x10
-#define XDL3_XDL33      0x08
-#define XDL3_XDL32      0x04
-#define XDL3_XDL31      0x02
-#define XDL3_XDL30      0x01
-
-
-/* ICB1-4 (Idle Channel Register 1-4)
-   ------------------ E1 ---------------------------- */
-
-#define E1_ICB1_IC0	0x80
-#define E1_ICB1_IC1	0x40
-#define E1_ICB1_IC2	0x20
-#define E1_ICB1_IC3	0x10
-#define E1_ICB1_IC4	0x08
-#define E1_ICB1_IC5	0x04
-#define E1_ICB1_IC6	0x02
-#define E1_ICB1_IC7	0x01
-
-#define E1_ICB2_IC8	0x80
-#define E1_ICB2_IC9	0x40
-#define E1_ICB2_IC10	0x20
-#define E1_ICB2_IC11	0x10
-#define E1_ICB2_IC12	0x08
-#define E1_ICB2_IC13	0x04
-#define E1_ICB2_IC14	0x02
-#define E1_ICB2_IC15	0x01
-
-#define E1_ICB3_IC16	0x80
-#define E1_ICB3_IC17	0x40
-#define E1_ICB3_IC18	0x20
-#define E1_ICB3_IC19	0x10
-#define E1_ICB3_IC20	0x08
-#define E1_ICB3_IC21	0x04
-#define E1_ICB3_IC22	0x02
-#define E1_ICB3_IC23	0x01
-
-#define E1_ICB4_IC24	0x80
-#define E1_ICB4_IC25	0x40
-#define E1_ICB4_IC26	0x20
-#define E1_ICB4_IC27	0x10
-#define E1_ICB4_IC28	0x08
-#define E1_ICB4_IC29	0x04
-#define E1_ICB4_IC30	0x02
-#define E1_ICB4_IC31	0x01
-
-/* ICB1-4 (Idle Channel Register 1-4)
-   ------------------ T1 ---------------------------- */
-
-#define T1_ICB1_IC1	0x80
-#define T1_ICB1_IC2	0x40
-#define T1_ICB1_IC3	0x20
-#define T1_ICB1_IC4	0x10
-#define T1_ICB1_IC5	0x08
-#define T1_ICB1_IC6	0x04
-#define T1_ICB1_IC7	0x02
-#define T1_ICB1_IC8	0x01
-
-#define T1_ICB2_IC9	0x80
-#define T1_ICB2_IC10	0x40
-#define T1_ICB2_IC11	0x20
-#define T1_ICB2_IC12	0x10
-#define T1_ICB2_IC13	0x08
-#define T1_ICB2_IC14	0x04
-#define T1_ICB2_IC15	0x02
-#define T1_ICB2_IC16	0x01
-
-#define T1_ICB3_IC17	0x80
-#define T1_ICB3_IC18	0x40
-#define T1_ICB3_IC19	0x20
-#define T1_ICB3_IC20	0x10
-#define T1_ICB3_IC21	0x08
-#define T1_ICB3_IC22	0x04
-#define T1_ICB3_IC23	0x02
-#define T1_ICB3_IC24	0x01
-
-/* FMR3 (Framer Mode Register 3)
-   --------------------E1------------------------ */
-
-#define FMR3_CMI        0x08
-#define FMR3_SYNSA      0x04
-#define FMR3_CFRZ       0x02
-#define FMR3_EXTIW      0x01
-
-
-
-/* CCB1-3 (Clear Channel Register)
-   ------------------- T1 ----------------------- */
-
-#define CCB1_CH1        0x80
-#define CCB1_CH2        0x40
-#define CCB1_CH3        0x20
-#define CCB1_CH4        0x10
-#define CCB1_CH5        0x08
-#define CCB1_CH6        0x04
-#define CCB1_CH7        0x02
-#define CCB1_CH8        0x01
-
-#define CCB2_CH9        0x80
-#define CCB2_CH10       0x40
-#define CCB2_CH11       0x20
-#define CCB2_CH12       0x10
-#define CCB2_CH13       0x08
-#define CCB2_CH14       0x04
-#define CCB2_CH15       0x02
-#define CCB2_CH16       0x01
-
-#define CCB3_CH17       0x80
-#define CCB3_CH18       0x40
-#define CCB3_CH19       0x20
-#define CCB3_CH20       0x10
-#define CCB3_CH21       0x08
-#define CCB3_CH22       0x04
-#define CCB3_CH23       0x02
-#define CCB3_CH24       0x01
-
-
-/* LIM0/1 (Line Interface Mode 0/1)
-   ------------------- E1 & T1 --------------------------- */
-
-#define LIM0_XFB        0x80
-#define LIM0_XDOS       0x40
-#define LIM0_SCL1       0x20
-#define LIM0_SCL0       0x10
-#define LIM0_EQON       0x08
-#define LIM0_ELOS       0x04
-#define LIM0_LL         0x02
-#define LIM0_MAS        0x01
-
-#define LIM1_EFSC       0x80
-#define LIM1_RIL2       0x40
-#define LIM1_RIL1       0x20
-#define LIM1_RIL0       0x10
-#define LIM1_DCOC       0x08
-#define LIM1_JATT       0x04
-#define LIM1_RL         0x02
-#define LIM1_DRS        0x01
-
-
-/* PCDR (Pulse Count Detection Register(Read/Write))
-   ------------------ E1 & T1 ------------------------- */
-
-#define PCDR_PCD7	0x80
-#define PCDR_PCD6	0x40
-#define PCDR_PCD5	0x20
-#define PCDR_PCD4	0x10
-#define PCDR_PCD3	0x08
-#define PCDR_PCD2	0x04
-#define PCDR_PCD1	0x02
-#define PCDR_PCD0	0x01
-
-#define PCRR_PCR7	0x80
-#define PCRR_PCR6	0x40
-#define PCRR_PCR5	0x20
-#define PCRR_PCR4	0x10
-#define PCRR_PCR3	0x08
-#define PCRR_PCR2	0x04
-#define PCRR_PCR1	0x02
-#define PCRR_PCR0	0x01
-
-
-/* LIM2 (Line Interface Mode 2)
-
-   ------------------ E1 & T1 ---------------------------- */
-
-#define LIM2_DJA2	0x20
-#define LIM2_DJA1	0x10
-#define LIM2_LOS2	0x02
-#define LIM2_LOS1	0x01
-
-/* LCR1 (Loop Code Register 1) */
-
-#define LCR1_EPRM	0x80
-#define	LCR1_XPRBS	0x40
-
-/* SIC1 (System Interface Control 1) */
-#define SIC1_SRSC	0x80
-#define SIC1_RBS1	0x20
-#define SIC1_RBS0	0x10
-#define SIC1_SXSC	0x08
-#define SIC1_XBS1	0x02
-#define SIC1_XBS0	0x01
-
-/* DEC (Disable Error Counter)
-   ------------------ E1 & T1 ---------------------------- */
-
-#define DEC_DCEC3       0x20
-#define DEC_DBEC        0x10
-#define DEC_DCEC1       0x08
-#define DEC_DCEC        0x08
-#define DEC_DEBC        0x04
-#define DEC_DCVC        0x02
-#define DEC_DFEC        0x01
-
-
-/* FALC Register Bits (Receive Mode)
-   ---------------------------------------------------------------------------- */
-
-
-/* FRS0/1 (Framer Receive Status Register 0/1)
-   ----------------- E1 & T1 ---------------------------------- */
-
-#define FRS0_LOS        0x80
-#define FRS0_AIS        0x40
-#define FRS0_LFA        0x20
-#define FRS0_RRA        0x10
-#define FRS0_API        0x08
-#define FRS0_NMF        0x04
-#define FRS0_LMFA       0x02
-#define FRS0_FSRF       0x01
-
-#define FRS1_TS16RA     0x40
-#define FRS1_TS16LOS    0x20
-#define FRS1_TS16AIS    0x10
-#define FRS1_TS16LFA    0x08
-#define FRS1_EXZD       0x80
-#define FRS1_LLBDD      0x10
-#define FRS1_LLBAD      0x08
-#define FRS1_XLS        0x02
-#define FRS1_XLO        0x01
-#define FRS1_PDEN	0x40
-
-/* FRS2/3 (Framer Receive Status Register 2/3)
-   ----------------- T1 ---------------------------------- */
-
-#define FRS2_ESC2       0x80
-#define FRS2_ESC1       0x40
-#define FRS2_ESC0       0x20
-
-#define FRS3_FEH5       0x20
-#define FRS3_FEH4       0x10
-#define FRS3_FEH3       0x08
-#define FRS3_FEH2       0x04
-#define FRS3_FEH1       0x02
-#define FRS3_FEH0       0x01
-
-
-/* RSW (Receive Service Word Pulseframe)
-   ----------------- E1 ------------------------------ */
-
-#define RSW_RSI         0x80
-#define RSW_RRA         0x20
-#define RSW_RYO         0x10
-#define RSW_RY1         0x08
-#define RSW_RY2         0x04
-#define RSW_RY3         0x02
-#define RSW_RY4         0x01
-
-
-/* RSP (Receive Spare Bits / Additional Status)
-   ---------------- E1 ------------------------------- */
-
-#define RSP_SI1         0x80
-#define RSP_SI2         0x40
-#define RSP_LLBDD	0x10
-#define RSP_LLBAD	0x08
-#define RSP_RSIF        0x04
-#define RSP_RS13        0x02
-#define RSP_RS15        0x01
-
-
-/* FECL (Framing Error Counter)
-   ---------------- E1 & T1 -------------------------- */
-
-#define FECL_FE7        0x80
-#define FECL_FE6        0x40
-#define FECL_FE5        0x20
-#define FECL_FE4        0x10
-#define FECL_FE3        0x08
-#define FECL_FE2        0x04
-#define FECL_FE1        0x02
-#define FECL_FE0        0x01
-
-#define FECH_FE15       0x80
-#define FECH_FE14       0x40
-#define FECH_FE13       0x20
-#define FECH_FE12       0x10
-#define FECH_FE11       0x08
-#define FECH_FE10       0x04
-#define FECH_FE9        0x02
-#define FECH_FE8        0x01
-
-
-/* CVCl (Code Violation Counter)
-   ----------------- E1 ------------------------- */
-
-#define CVCL_CV7        0x80
-#define CVCL_CV6        0x40
-#define CVCL_CV5        0x20
-#define CVCL_CV4        0x10
-#define CVCL_CV3        0x08
-#define CVCL_CV2        0x04
-#define CVCL_CV1        0x02
-#define CVCL_CV0        0x01
-
-#define CVCH_CV15       0x80
-#define CVCH_CV14       0x40
-#define CVCH_CV13       0x20
-#define CVCH_CV12       0x10
-#define CVCH_CV11       0x08
-#define CVCH_CV10       0x04
-#define CVCH_CV9        0x02
-#define CVCH_CV8        0x01
-
-
-/* CEC1-3L (CRC Error Counter)
-   ------------------ E1 ----------------------------- */
-
-#define CEC1L_CR7       0x80
-#define CEC1L_CR6       0x40
-#define CEC1L_CR5       0x20
-#define CEC1L_CR4       0x10
-#define CEC1L_CR3       0x08
-#define CEC1L_CR2       0x04
-#define CEC1L_CR1       0x02
-#define CEC1L_CR0       0x01
-
-#define CEC1H_CR15      0x80
-#define CEC1H_CR14      0x40
-#define CEC1H_CR13      0x20
-#define CEC1H_CR12      0x10
-#define CEC1H_CR11      0x08
-#define CEC1H_CR10      0x04
-#define CEC1H_CR9       0x02
-#define CEC1H_CR8       0x01
-
-#define CEC2L_CR7       0x80
-#define CEC2L_CR6       0x40
-#define CEC2L_CR5       0x20
-#define CEC2L_CR4       0x10
-#define CEC2L_CR3       0x08
-#define CEC2L_CR2       0x04
-#define CEC2L_CR1       0x02
-#define CEC2L_CR0       0x01
-
-#define CEC2H_CR15      0x80
-#define CEC2H_CR14      0x40
-#define CEC2H_CR13      0x20
-#define CEC2H_CR12      0x10
-#define CEC2H_CR11      0x08
-#define CEC2H_CR10      0x04
-#define CEC2H_CR9       0x02
-#define CEC2H_CR8       0x01
-
-#define CEC3L_CR7       0x80
-#define CEC3L_CR6       0x40
-#define CEC3L_CR5       0x20
-#define CEC3L_CR4       0x10
-#define CEC3L_CR3       0x08
-#define CEC3L_CR2       0x04
-#define CEC3L_CR1       0x02
-#define CEC3L_CR0       0x01
-
-#define CEC3H_CR15      0x80
-#define CEC3H_CR14      0x40
-#define CEC3H_CR13      0x20
-#define CEC3H_CR12      0x10
-#define CEC3H_CR11      0x08
-#define CEC3H_CR10      0x04
-#define CEC3H_CR9       0x02
-#define CEC3H_CR8       0x01
-
-
-/* CECL (CRC Error Counter)
-
-   ------------------ T1 ----------------------------- */
-
-#define CECL_CR7        0x80
-#define CECL_CR6        0x40
-#define CECL_CR5        0x20
-#define CECL_CR4        0x10
-#define CECL_CR3        0x08
-#define CECL_CR2        0x04
-#define CECL_CR1        0x02
-#define CECL_CR0        0x01
-
-#define CECH_CR15       0x80
-#define CECH_CR14       0x40
-#define CECH_CR13       0x20
-#define CECH_CR12       0x10
-#define CECH_CR11       0x08
-#define CECH_CR10       0x04
-#define CECH_CR9        0x02
-#define CECH_CR8        0x01
-
-/* EBCL (E Bit Error Counter)
-   ------------------- E1 & T1 ------------------------- */
-
-#define EBCL_EB7        0x80
-#define EBCL_EB6        0x40
-#define EBCL_EB5        0x20
-#define EBCL_EB4        0x10
-#define EBCL_EB3        0x08
-#define EBCL_EB2        0x04
-#define EBCL_EB1        0x02
-#define EBCL_EB0        0x01
-
-#define EBCH_EB15       0x80
-#define EBCH_EB14       0x40
-#define EBCH_EB13       0x20
-#define EBCH_EB12       0x10
-#define EBCH_EB11       0x08
-#define EBCH_EB10       0x04
-#define EBCH_EB9        0x02
-#define EBCH_EB8        0x01
-
-
-/* RSA4-8 (Receive Sa4-8-Bit Register)
-   -------------------- E1 --------------------------- */
-
-#define RSA4_RS47       0x80
-#define RSA4_RS46       0x40
-#define RSA4_RS45       0x20
-#define RSA4_RS44       0x10
-#define RSA4_RS43       0x08
-#define RSA4_RS42       0x04
-#define RSA4_RS41       0x02
-#define RSA4_RS40       0x01
-
-#define RSA5_RS57       0x80
-#define RSA5_RS56       0x40
-#define RSA5_RS55       0x20
-#define RSA5_RS54       0x10
-#define RSA5_RS53       0x08
-#define RSA5_RS52       0x04
-#define RSA5_RS51       0x02
-#define RSA5_RS50       0x01
-
-#define RSA6_RS67       0x80
-#define RSA6_RS66       0x40
-#define RSA6_RS65       0x20
-#define RSA6_RS64       0x10
-#define RSA6_RS63       0x08
-#define RSA6_RS62       0x04
-#define RSA6_RS61       0x02
-#define RSA6_RS60       0x01
-
-#define RSA7_RS77       0x80
-#define RSA7_RS76       0x40
-#define RSA7_RS75       0x20
-#define RSA7_RS74       0x10
-#define RSA7_RS73       0x08
-#define RSA7_RS72       0x04
-#define RSA7_RS71       0x02
-#define RSA7_RS70       0x01
-
-#define RSA8_RS87       0x80
-#define RSA8_RS86       0x40
-#define RSA8_RS85       0x20
-#define RSA8_RS84       0x10
-#define RSA8_RS83       0x08
-#define RSA8_RS82       0x04
-#define RSA8_RS81       0x02
-#define RSA8_RS80       0x01
-
-/* RSA6S (Receive Sa6 Bit Status Register)
-   ------------------------ T1 ------------------------- */
-
-#define RSA6S_SX        0x20
-#define RSA6S_SF        0x10
-#define RSA6S_SE        0x08
-#define RSA6S_SC        0x04
-#define RSA6S_SA        0x02
-#define RSA6S_S8        0x01
-
-
-/* RDL1-3 Receive DL-Bit Register1-3)
-   ------------------------ T1 ------------------------- */
-
-#define RDL1_RDL17      0x80
-#define RDL1_RDL16      0x40
-#define RDL1_RDL15      0x20
-#define RDL1_RDL14      0x10
-#define RDL1_RDL13      0x08
-#define RDL1_RDL12      0x04
-#define RDL1_RDL11      0x02
-#define RDL1_RDL10      0x01
-
-#define RDL2_RDL27      0x80
-#define RDL2_RDL26      0x40
-#define RDL2_RDL25      0x20
-#define RDL2_RDL24      0x10
-#define RDL2_RDL23      0x08
-#define RDL2_RDL22      0x04
-#define RDL2_RDL21      0x02
-#define RDL2_RDL20      0x01
-
-#define RDL3_RDL37      0x80
-#define RDL3_RDL36      0x40
-#define RDL3_RDL35      0x20
-#define RDL3_RDL34      0x10
-#define RDL3_RDL33      0x08
-#define RDL3_RDL32      0x04
-#define RDL3_RDL31      0x02
-#define RDL3_RDL30      0x01
-
-
-/* SIS (Signaling Status Register)
-
-   -------------------- E1 & T1 -------------------------- */
-
-#define SIS_XDOV        0x80
-#define SIS_XFW         0x40
-#define SIS_XREP        0x20
-#define SIS_RLI         0x08
-#define SIS_CEC         0x04
-#define SIS_BOM         0x01
-
-
-/* RSIS (Receive Signaling Status Register)
-
-   -------------------- E1 & T1 --------------------------- */
-
-#define RSIS_VFR        0x80
-#define RSIS_RDO        0x40
-#define RSIS_CRC16      0x20
-#define RSIS_RAB        0x10
-#define RSIS_HA1        0x08
-#define RSIS_HA0        0x04
-#define RSIS_HFR        0x02
-#define RSIS_LA         0x01
-
-
-/* RBCL/H (Receive Byte Count Low/High)
-
-   ------------------- E1 & T1 ----------------------- */
-
-#define RBCL_RBC7       0x80
-#define RBCL_RBC6       0x40
-#define RBCL_RBC5       0x20
-#define RBCL_RBC4       0x10
-#define RBCL_RBC3       0x08
-#define RBCL_RBC2       0x04
-#define RBCL_RBC1       0x02
-#define RBCL_RBC0       0x01
-
-#define RBCH_OV         0x10
-#define RBCH_RBC11      0x08
-#define RBCH_RBC10      0x04
-#define RBCH_RBC9       0x02
-#define RBCH_RBC8       0x01
-
-
-/* ISR1-3  (Interrupt Status Register 1-3)
-
-   ------------------ E1 & T1 ------------------------------ */
-
-#define  FISR0_RME	0x80
-#define  FISR0_RFS	0x40
-#define  FISR0_T8MS	0x20
-#define  FISR0_ISF	0x20
-#define  FISR0_RMB	0x10
-#define  FISR0_CASC	0x08
-#define  FISR0_RSC	0x08
-#define  FISR0_CRC6	0x04
-#define  FISR0_CRC4	0x04
-#define  FISR0_PDEN	0x02
-#define  FISR0_RPF	0x01
-
-#define  FISR1_CASE	0x80
-#define  FISR1_LLBSC	0x80
-#define  FISR1_RDO	0x40
-#define  FISR1_ALLS	0x20
-#define  FISR1_XDU	0x10
-#define  FISR1_XMB	0x08
-#define  FISR1_XLSC	0x02
-#define  FISR1_XPR	0x01
-
-#define  FISR2_FAR	0x80
-#define  FISR2_LFA	0x40
-#define  FISR2_MFAR	0x20
-#define  FISR2_T400MS	0x10
-#define  FISR2_LMFA	0x10
-#define  FISR2_AIS	0x08
-#define  FISR2_LOS	0x04
-#define  FISR2_RAR	0x02
-#define  FISR2_RA	0x01
-
-#define  FISR3_ES	0x80
-#define  FISR3_SEC	0x40
-#define  FISR3_LMFA16	0x20
-#define  FISR3_AIS16	0x10
-#define  FISR3_RA16	0x08
-#define  FISR3_API	0x04
-#define  FISR3_XSLP	0x20
-#define  FISR3_XSLN	0x10
-#define  FISR3_LLBSC	0x08
-#define  FISR3_XRS	0x04
-#define  FISR3_SLN	0x02
-#define  FISR3_SLP	0x01
-
-
-/* GIS  (Global Interrupt Status Register)
-
-   --------------------- E1 & T1 --------------------- */
-
-#define  GIS_ISR3	0x08
-#define  GIS_ISR2	0x04
-#define  GIS_ISR1	0x02
-#define  GIS_ISR0	0x01
-
-
-/* VSTR  (Version Status Register)
-
-   --------------------- E1 & T1 --------------------- */
-
-#define  VSTR_VN3	0x08
-#define  VSTR_VN2	0x04
-#define  VSTR_VN1	0x02
-#define  VSTR_VN0	0x01
-
-
-/*>>>>>>>>>>>>>>>>>>>>>  Local Control Structures  <<<<<<<<<<<<<<<<<<<<<<<<< */
-
-/* Write-only Registers (E1/T1 control mode write registers) */
-#define XFIFOH	0x00		/* Tx FIFO High Byte */
-#define XFIFOL	0x01		/* Tx FIFO Low Byte */
-#define CMDR	0x02		/* Command Reg */
-#define DEC	0x60		/* Disable Error Counter */
-#define TEST2	0x62		/* Manuf. Test Reg 2 */
-#define XS(nbr)	(0x70 + (nbr))	/* Tx CAS Reg (0 to 15) */
-
-/* Read-write Registers (E1/T1 status mode read registers) */
-#define MODE	0x03	/* Mode Reg */
-#define RAH1	0x04	/* Receive Address High 1 */
-#define RAH2	0x05	/* Receive Address High 2 */
-#define RAL1	0x06	/* Receive Address Low 1 */
-#define RAL2	0x07	/* Receive Address Low 2 */
-#define IPC	0x08	/* Interrupt Port Configuration */
-#define CCR1	0x09	/* Common Configuration Reg 1 */
-#define CCR3	0x0A	/* Common Configuration Reg 3 */
-#define PRE	0x0B	/* Preamble Reg */
-#define RTR1	0x0C	/* Receive Timeslot Reg 1 */
-#define RTR2	0x0D	/* Receive Timeslot Reg 2 */
-#define RTR3	0x0E	/* Receive Timeslot Reg 3 */
-#define RTR4	0x0F	/* Receive Timeslot Reg 4 */
-#define TTR1	0x10	/* Transmit Timeslot Reg 1 */
-#define TTR2	0x11	/* Transmit Timeslot Reg 2 */
-#define TTR3	0x12	/* Transmit Timeslot Reg 3 */
-#define TTR4	0x13	/* Transmit Timeslot Reg 4 */
-#define IMR0	0x14	/* Interrupt Mask Reg 0 */
-#define IMR1	0x15	/* Interrupt Mask Reg 1 */
-#define IMR2	0x16	/* Interrupt Mask Reg 2 */
-#define IMR3	0x17	/* Interrupt Mask Reg 3 */
-#define IMR4	0x18	/* Interrupt Mask Reg 4 */
-#define IMR5	0x19	/* Interrupt Mask Reg 5 */
-#define FMR0	0x1A	/* Framer Mode Reigster 0 */
-#define FMR1	0x1B	/* Framer Mode Reigster 1 */
-#define FMR2	0x1C	/* Framer Mode Reigster 2 */
-#define LOOP	0x1D	/* Channel Loop Back */
-#define XSW	0x1E	/* Transmit Service Word */
-#define FMR4	0x1E	/* Framer Mode Reg 4 */
-#define XSP	0x1F	/* Transmit Spare Bits */
-#define FMR5	0x1F	/* Framer Mode Reg 5 */
-#define XC0	0x20	/* Transmit Control 0 */
-#define XC1	0x21	/* Transmit Control 1 */
-#define RC0	0x22	/* Receive Control 0 */
-#define RC1	0x23	/* Receive Control 1 */
-#define XPM0	0x24	/* Transmit Pulse Mask 0 */
-#define XPM1	0x25	/* Transmit Pulse Mask 1 */
-#define XPM2	0x26	/* Transmit Pulse Mask 2 */
-#define TSWM	0x27	/* Transparent Service Word Mask */
-#define TEST1	0x28	/* Manuf. Test Reg 1 */
-#define IDLE	0x29	/* Idle Channel Code */
-#define XSA4    0x2A	/* Transmit SA4 Bit Reg */
-#define XDL1	0x2A	/* Transmit DL-Bit Reg 2 */
-#define XSA5    0x2B	/* Transmit SA4 Bit Reg */
-#define XDL2	0x2B	/* Transmit DL-Bit Reg 2 */
-#define XSA6    0x2C	/* Transmit SA4 Bit Reg */
-#define XDL3	0x2C	/* Transmit DL-Bit Reg 2 */
-#define XSA7    0x2D	/* Transmit SA4 Bit Reg */
-#define CCB1	0x2D	/* Clear Channel Reg 1 */
-#define XSA8    0x2E	/* Transmit SA4 Bit Reg */
-#define CCB2	0x2E	/* Clear Channel Reg 2 */
-#define FMR3	0x2F	/* Framer Mode Reg. 3 */
-#define CCB3	0x2F	/* Clear Channel Reg 3 */
-#define ICB1	0x30	/* Idle Channel Reg 1 */
-#define ICB2	0x31	/* Idle Channel Reg 2 */
-#define ICB3	0x32	/* Idle Channel Reg 3 */
-#define ICB4	0x33	/* Idle Channel Reg 4 */
-#define LIM0	0x34	/* Line Interface Mode 0 */
-#define LIM1	0x35	/* Line Interface Mode 1 */
-#define PCDR	0x36	/* Pulse Count Detection */
-#define PCRR	0x37	/* Pulse Count Recovery */
-#define LIM2	0x38	/* Line Interface Mode Reg 2 */
-#define LCR1	0x39	/* Loop Code Reg 1 */
-#define LCR2	0x3A	/* Loop Code Reg 2 */
-#define LCR3	0x3B	/* Loop Code Reg 3 */
-#define SIC1	0x3C	/* System Interface Control 1 */
-
-/* Read-only Registers (E1/T1 control mode read registers) */
-#define RFIFOH	0x00		/* Receive FIFO */
-#define RFIFOL	0x01		/* Receive FIFO */
-#define FRS0	0x4C		/* Framer Receive Status 0 */
-#define FRS1	0x4D		/* Framer Receive Status 1 */
-#define RSW	0x4E		/* Receive Service Word */
-#define FRS2	0x4E		/* Framer Receive Status 2 */
-#define RSP	0x4F		/* Receive Spare Bits */
-#define FRS3	0x4F		/* Framer Receive Status 3 */
-#define FECL	0x50		/* Framing Error Counter */
-#define FECH	0x51		/* Framing Error Counter */
-#define CVCL	0x52		/* Code Violation Counter */
-#define CVCH	0x53		/* Code Violation Counter */
-#define CECL	0x54		/* CRC Error Counter 1 */
-#define CECH	0x55		/* CRC Error Counter 1 */
-#define EBCL	0x56		/* E-Bit Error Counter */
-#define EBCH	0x57		/* E-Bit Error Counter */
-#define BECL	0x58		/* Bit Error Counter Low */
-#define BECH	0x59		/* Bit Error Counter Low */
-#define CEC3	0x5A		/* CRC Error Counter 3 (16-bit) */
-#define RSA4	0x5C		/* Receive SA4 Bit Reg */
-#define RDL1	0x5C		/* Receive DL-Bit Reg 1 */
-#define RSA5	0x5D		/* Receive SA5 Bit Reg */
-#define RDL2	0x5D		/* Receive DL-Bit Reg 2 */
-#define RSA6	0x5E		/* Receive SA6 Bit Reg */
-#define RDL3	0x5E		/* Receive DL-Bit Reg 3 */
-#define RSA7	0x5F		/* Receive SA7 Bit Reg */
-#define RSA8	0x60		/* Receive SA8 Bit Reg */
-#define RSA6S	0x61		/* Receive SA6 Bit Status Reg */
-#define TSR0	0x62		/* Manuf. Test Reg 0 */
-#define TSR1	0x63		/* Manuf. Test Reg 1 */
-#define SIS	0x64		/* Signaling Status Reg */
-#define RSIS	0x65		/* Receive Signaling Status Reg */
-#define RBCL	0x66		/* Receive Byte Control */
-#define RBCH	0x67		/* Receive Byte Control */
-#define FISR0	0x68		/* Interrupt Status Reg 0 */
-#define FISR1	0x69		/* Interrupt Status Reg 1 */
-#define FISR2	0x6A		/* Interrupt Status Reg 2 */
-#define FISR3	0x6B		/* Interrupt Status Reg 3 */
-#define GIS	0x6E		/* Global Interrupt Status */
-#define VSTR	0x6F		/* Version Status */
-#define RS(nbr)	(0x70 + (nbr))	/* Rx CAS Reg (0 to 15) */
-
-#endif	/* _FALC_LH_H */
-
diff --git a/drivers/net/wan/pc300.h b/drivers/net/wan/pc300.h
deleted file mode 100644
index 2e4f84f6cad4..000000000000
--- a/drivers/net/wan/pc300.h
+++ /dev/null
@@ -1,436 +0,0 @@
-/*
- * pc300.h	Cyclades-PC300(tm) Kernel API Definitions.
- *
- * Author:	Ivan Passos <ivan@cyclades.com>
- *
- * Copyright:	(c) 1999-2002 Cyclades Corp.
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *
- * $Log: pc300.h,v $
- * Revision 3.12  2002/03/07 14:17:09  henrique
- * License data fixed
- *
- * Revision 3.11  2002/01/28 21:09:39  daniela
- * Included ';' after pc300hw.bus.
- *
- * Revision 3.10  2002/01/17 17:58:52  ivan
- * Support for PC300-TE/M (PMC).
- *
- * Revision 3.9  2001/09/28 13:30:53  daniela
- * Renamed dma_start routine to rx_dma_start.
- *
- * Revision 3.8  2001/09/24 13:03:45  daniela
- * Fixed BOF interrupt treatment. Created dma_start routine.
- *
- * Revision 3.7  2001/08/10 17:19:58  daniela
- * Fixed IOCTLs defines.
- *
- * Revision 3.6  2001/07/18 19:24:42  daniela
- * Included kernel version.
- *
- * Revision 3.5  2001/07/05 18:38:08  daniela
- * DMA transmission bug fix.
- *
- * Revision 3.4  2001/06/26 17:10:40  daniela
- * New configuration parameters (line code, CRC calculation and clock).
- *
- * Revision 3.3  2001/06/22 13:13:02  regina
- * MLPPP implementation
- *
- * Revision 3.2  2001/06/18 17:56:09  daniela
- * Increased DEF_MTU and TX_QUEUE_LEN.
- *
- * Revision 3.1  2001/06/15 12:41:10  regina
- * upping major version number
- *
- * Revision 1.1.1.1  2001/06/13 20:25:06  daniela
- * PC300 initial CVS version (3.4.0-pre1)
- *
- * Revision 2.3 2001/03/05 daniela
- * Created struct pc300conf, to provide the hardware information to pc300util.
- * Inclusion of 'alloc_ramsize' field on structure 'pc300hw'.
- * 
- * Revision 2.2 2000/12/22 daniela
- * Structures and defines to support pc300util: statistics, status, 
- * loopback tests, trace.
- * 
- * Revision 2.1 2000/09/28 ivan
- * Inclusion of 'iophys' and 'iosize' fields on structure 'pc300hw', to 
- * allow release of I/O region at module unload.
- * Changed location of include files.
- *
- * Revision 2.0 2000/03/27 ivan
- * Added support for the PC300/TE cards.
- *
- * Revision 1.1 2000/01/31 ivan
- * Replaced 'pc300[drv|sca].h' former PC300 driver include files.
- *
- * Revision 1.0 1999/12/16 ivan
- * First official release.
- * Inclusion of 'nchan' field on structure 'pc300hw', to allow variable 
- * number of ports per card.
- * Inclusion of 'if_ptr' field on structure 'pc300dev'.
- *
- * Revision 0.6 1999/11/17 ivan
- * Changed X.25-specific function names to comply with adopted convention.
- *
- * Revision 0.5 1999/11/16 Daniela Squassoni
- * X.25 support.
- *
- * Revision 0.4 1999/11/15 ivan
- * Inclusion of 'clock' field on structure 'pc300hw'.
- *
- * Revision 0.3 1999/11/10 ivan
- * IOCTL name changing.
- * Inclusion of driver function prototypes.
- *
- * Revision 0.2 1999/11/03 ivan
- * Inclusion of 'tx_skb' and union 'ifu' on structure 'pc300dev'.
- *
- * Revision 0.1 1999/01/15 ivan
- * Initial version.
- *
- */
-
-#ifndef	_PC300_H
-#define	_PC300_H
-
-#include <linux/hdlc.h>
-#include "hd64572.h"
-#include "pc300-falc-lh.h"
-
-#define PC300_PROTO_MLPPP 1
-
-#define	PC300_MAXCHAN	2	/* Number of channels per card */
-
-#define	PC300_RAMSIZE	0x40000 /* RAM window size (256Kb) */
-#define	PC300_FALCSIZE	0x400	/* FALC window size (1Kb) */
-
-#define PC300_OSC_CLOCK	24576000
-#define PC300_PCI_CLOCK	33000000
-
-#define BD_DEF_LEN	0x0800	/* DMA buffer length (2KB) */
-#define DMA_TX_MEMSZ	0x8000	/* Total DMA Tx memory size (32KB/ch) */
-#define DMA_RX_MEMSZ	0x10000	/* Total DMA Rx memory size (64KB/ch) */
-
-#define N_DMA_TX_BUF	(DMA_TX_MEMSZ / BD_DEF_LEN)	/* DMA Tx buffers */
-#define N_DMA_RX_BUF	(DMA_RX_MEMSZ / BD_DEF_LEN)	/* DMA Rx buffers */
-
-/* DMA Buffer Offsets */
-#define DMA_TX_BASE	((N_DMA_TX_BUF + N_DMA_RX_BUF) *	\
-			 PC300_MAXCHAN * sizeof(pcsca_bd_t))
-#define DMA_RX_BASE	(DMA_TX_BASE + PC300_MAXCHAN*DMA_TX_MEMSZ)
-
-/* DMA Descriptor Offsets */
-#define DMA_TX_BD_BASE	0x0000
-#define DMA_RX_BD_BASE	(DMA_TX_BD_BASE + ((PC300_MAXCHAN*DMA_TX_MEMSZ / \
-				BD_DEF_LEN) * sizeof(pcsca_bd_t)))
-
-/* DMA Descriptor Macros */
-#define TX_BD_ADDR(chan, n)	(DMA_TX_BD_BASE + \
-				 ((N_DMA_TX_BUF*chan) + n) * sizeof(pcsca_bd_t))
-#define RX_BD_ADDR(chan, n)	(DMA_RX_BD_BASE + \
-				 ((N_DMA_RX_BUF*chan) + n) * sizeof(pcsca_bd_t))
-
-/* Macro to access the FALC registers (TE only) */
-#define F_REG(reg, chan)	(0x200*(chan) + ((reg)<<2))
-
-/***************************************
- * Memory access functions/macros      *
- * (required to support Alpha systems) *
- ***************************************/
-#define cpc_writeb(port,val)	{writeb((u8)(val),(port)); mb();}
-#define cpc_writew(port,val)	{writew((ushort)(val),(port)); mb();}
-#define cpc_writel(port,val)	{writel((u32)(val),(port)); mb();}
-
-#define cpc_readb(port)		readb(port)
-#define cpc_readw(port)		readw(port)
-#define cpc_readl(port)		readl(port)
-
-/****** Data Structures *****************************************************/
-
-/*
- *      RUNTIME_9050 - PLX PCI9050-1 local configuration and shared runtime
- *      registers. This structure can be used to access the 9050 registers
- *      (memory mapped).
- */
-struct RUNTIME_9050 {
-	u32 loc_addr_range[4];	/* 00-0Ch : Local Address Ranges */
-	u32 loc_rom_range;	/* 10h : Local ROM Range */
-	u32 loc_addr_base[4];	/* 14-20h : Local Address Base Addrs */
-	u32 loc_rom_base;	/* 24h : Local ROM Base */
-	u32 loc_bus_descr[4];	/* 28-34h : Local Bus Descriptors */
-	u32 rom_bus_descr;	/* 38h : ROM Bus Descriptor */
-	u32 cs_base[4];		/* 3C-48h : Chip Select Base Addrs */
-	u32 intr_ctrl_stat;	/* 4Ch : Interrupt Control/Status */
-	u32 init_ctrl;		/* 50h : EEPROM ctrl, Init Ctrl, etc */
-};
-
-#define PLX_9050_LINT1_ENABLE	0x01
-#define PLX_9050_LINT1_POL	0x02
-#define PLX_9050_LINT1_STATUS	0x04
-#define PLX_9050_LINT2_ENABLE	0x08
-#define PLX_9050_LINT2_POL	0x10
-#define PLX_9050_LINT2_STATUS	0x20
-#define PLX_9050_INTR_ENABLE	0x40
-#define PLX_9050_SW_INTR	0x80
-
-/* Masks to access the init_ctrl PLX register */
-#define	PC300_CLKSEL_MASK		(0x00000004UL)
-#define	PC300_CHMEDIA_MASK(chan)	(0x00000020UL<<(chan*3))
-#define	PC300_CTYPE_MASK		(0x00000800UL)
-
-/* CPLD Registers (base addr = falcbase, TE only) */
-/* CPLD v. 0 */
-#define CPLD_REG1	0x140	/* Chip resets, DCD/CTS status */
-#define CPLD_REG2	0x144	/* Clock enable , LED control */
-/* CPLD v. 2 or higher */
-#define CPLD_V2_REG1	0x100	/* Chip resets, DCD/CTS status */
-#define CPLD_V2_REG2	0x104	/* Clock enable , LED control */
-#define CPLD_ID_REG	0x108	/* CPLD version */
-
-/* CPLD Register bit description: for the FALC bits, they should always be 
-   set based on the channel (use (bit<<(2*ch)) to access the correct bit for 
-   that channel) */
-#define CPLD_REG1_FALC_RESET	0x01
-#define CPLD_REG1_SCA_RESET	0x02
-#define CPLD_REG1_GLOBAL_CLK	0x08
-#define CPLD_REG1_FALC_DCD	0x10
-#define CPLD_REG1_FALC_CTS	0x20
-
-#define CPLD_REG2_FALC_TX_CLK	0x01
-#define CPLD_REG2_FALC_RX_CLK	0x02
-#define CPLD_REG2_FALC_LED1	0x10
-#define CPLD_REG2_FALC_LED2	0x20
-
-/* Structure with FALC-related fields (TE only) */
-#define PC300_FALC_MAXLOOP	0x0000ffff	/* for falc_issue_cmd() */
-
-typedef struct falc {
-	u8 sync;	/* If true FALC is synchronized */
-	u8 active;	/* if TRUE then already active */
-	u8 loop_active;	/* if TRUE a line loopback UP was received */
-	u8 loop_gen;	/* if TRUE a line loopback UP was issued */
-
-	u8 num_channels;
-	u8 offset;	/* 1 for T1, 0 for E1 */
-	u8 full_bandwidth;
-
-	u8 xmb_cause;
-	u8 multiframe_mode;
-
-	/* Statistics */
-	u16 pden;	/* Pulse Density violation count */
-	u16 los;	/* Loss of Signal count */
-	u16 losr;	/* Loss of Signal recovery count */
-	u16 lfa;	/* Loss of frame alignment count */
-	u16 farec;	/* Frame Alignment Recovery count */
-	u16 lmfa;	/* Loss of multiframe alignment count */
-	u16 ais;	/* Remote Alarm indication Signal count */
-	u16 sec;	/* One-second timer */
-	u16 es;		/* Errored second */
-	u16 rai;	/* remote alarm received */
-	u16 bec;
-	u16 fec;
-	u16 cvc;
-	u16 cec;
-	u16 ebc;
-
-	/* Status */
-	u8 red_alarm;
-	u8 blue_alarm;
-	u8 loss_fa;
-	u8 yellow_alarm;
-	u8 loss_mfa;
-	u8 prbs;
-} falc_t;
-
-typedef struct falc_status {
-	u8 sync;	/* If true FALC is synchronized */
-	u8 red_alarm;
-	u8 blue_alarm;
-	u8 loss_fa;
-	u8 yellow_alarm;
-	u8 loss_mfa;
-	u8 prbs;
-} falc_status_t;
-
-typedef struct rsv_x21_status {
-	u8 dcd;
-	u8 dsr;
-	u8 cts;
-	u8 rts;
-	u8 dtr;
-} rsv_x21_status_t;
-
-typedef struct pc300stats {
-	int hw_type;
-	u32 line_on;
-	u32 line_off;
-	struct net_device_stats gen_stats;
-	falc_t te_stats;
-} pc300stats_t;
-
-typedef struct pc300status {
-	int hw_type;
-	rsv_x21_status_t gen_status;
-	falc_status_t te_status;
-} pc300status_t;
-
-typedef struct pc300loopback {
-	char loop_type;
-	char loop_on;
-} pc300loopback_t;
-
-typedef struct pc300patterntst {
-	char patrntst_on;       /* 0 - off; 1 - on; 2 - read num_errors */
-	u16 num_errors;
-} pc300patterntst_t;
-
-typedef struct pc300dev {
-	struct pc300ch *chan;
-	u8 trace_on;
-	u32 line_on;		/* DCD(X.21, RSV) / sync(TE) change counters */
-	u32 line_off;
-	char name[16];
-	struct net_device *dev;
-#ifdef CONFIG_PC300_MLPPP
-	void *cpc_tty;	/* information to PC300 TTY driver */
-#endif
-}pc300dev_t;
-
-typedef struct pc300hw {
-	int type;		/* RSV, X21, etc. */
-	int bus;		/* Bus (PCI, PMC, etc.) */
-	int nchan;		/* number of channels */
-	int irq;		/* interrupt request level */
-	u32 clock;		/* Board clock */
-	u8 cpld_id;		/* CPLD ID (TE only) */
-	u16 cpld_reg1;		/* CPLD reg 1 (TE only) */
-	u16 cpld_reg2;		/* CPLD reg 2 (TE only) */
-	u16 gpioc_reg;		/* PLX GPIOC reg */
-	u16 intctl_reg;		/* PLX Int Ctrl/Status reg */
-	u32 iophys;		/* PLX registers I/O base */
-	u32 iosize;		/* PLX registers I/O size */
-	u32 plxphys;		/* PLX registers MMIO base (physical) */
-	void __iomem * plxbase;	/* PLX registers MMIO base (virtual) */
-	u32 plxsize;		/* PLX registers MMIO size */
-	u32 scaphys;		/* SCA registers MMIO base (physical) */
-	void __iomem * scabase;	/* SCA registers MMIO base (virtual) */
-	u32 scasize;		/* SCA registers MMIO size */
-	u32 ramphys;		/* On-board RAM MMIO base (physical) */
-	void __iomem * rambase;	/* On-board RAM MMIO base (virtual) */
-	u32 alloc_ramsize;	/* RAM MMIO size allocated by the PCI bridge */
-	u32 ramsize;		/* On-board RAM MMIO size */
-	u32 falcphys;		/* FALC registers MMIO base (physical) */
-	void __iomem * falcbase;/* FALC registers MMIO base (virtual) */
-	u32 falcsize;		/* FALC registers MMIO size */
-} pc300hw_t;
-
-typedef struct pc300chconf {
-	sync_serial_settings	phys_settings;	/* Clock type/rate (in bps),
-						   loopback mode */
-	raw_hdlc_proto		proto_settings;	/* Encoding, parity (CRC) */
-	u32 media;		/* HW media (RS232, V.35, etc.) */
-	u32 proto;		/* Protocol (PPP, X.25, etc.) */
-
-	/* TE-specific parameters */
-	u8 lcode;		/* Line Code (AMI, B8ZS, etc.) */
-	u8 fr_mode;		/* Frame Mode (ESF, D4, etc.) */
-	u8 lbo;			/* Line Build Out */
-	u8 rx_sens;		/* Rx Sensitivity (long- or short-haul) */
-	u32 tslot_bitmap;	/* bit[i]=1  =>  timeslot _i_ is active */
-} pc300chconf_t;
-
-typedef struct pc300ch {
-	struct pc300 *card;
-	int channel;
-	pc300dev_t d;
-	pc300chconf_t conf;
-	u8 tx_first_bd;	/* First TX DMA block descr. w/ data */
-	u8 tx_next_bd;	/* Next free TX DMA block descriptor */
-	u8 rx_first_bd;	/* First free RX DMA block descriptor */
-	u8 rx_last_bd;	/* Last free RX DMA block descriptor */
-	u8 nfree_tx_bd;	/* Number of free TX DMA block descriptors */
-	falc_t falc;	/* FALC structure (TE only) */
-} pc300ch_t;
-
-typedef struct pc300 {
-	pc300hw_t hw;			/* hardware config. */
-	pc300ch_t chan[PC300_MAXCHAN];
-	spinlock_t card_lock;
-} pc300_t;
-
-typedef struct pc300conf {
-	pc300hw_t hw;
-	pc300chconf_t conf;
-} pc300conf_t;
-
-/* DEV ioctl() commands */
-#define	N_SPPP_IOCTLS	2
-
-enum pc300_ioctl_cmds {
-	SIOCCPCRESERVED = (SIOCDEVPRIVATE + N_SPPP_IOCTLS),
-	SIOCGPC300CONF,
-	SIOCSPC300CONF,
-	SIOCGPC300STATUS,
-	SIOCGPC300FALCSTATUS,
-	SIOCGPC300UTILSTATS,
-	SIOCGPC300UTILSTATUS,
-	SIOCSPC300TRACE,
-	SIOCSPC300LOOPBACK,
-	SIOCSPC300PATTERNTEST,
-};
-
-/* Loopback types - PC300/TE boards */
-enum pc300_loopback_cmds {
-	PC300LOCLOOP = 1,
-	PC300REMLOOP,
-	PC300PAYLOADLOOP,
-	PC300GENLOOPUP,
-	PC300GENLOOPDOWN,
-};
-
-/* Control Constant Definitions */
-#define	PC300_RSV	0x01
-#define	PC300_X21	0x02
-#define	PC300_TE	0x03
-
-#define	PC300_PCI	0x00
-#define	PC300_PMC	0x01
-
-#define PC300_LC_AMI	0x01
-#define PC300_LC_B8ZS	0x02
-#define PC300_LC_NRZ	0x03
-#define PC300_LC_HDB3	0x04
-
-/* Framing (T1) */
-#define PC300_FR_ESF		0x01
-#define PC300_FR_D4		0x02
-#define PC300_FR_ESF_JAPAN	0x03
-
-/* Framing (E1) */
-#define PC300_FR_MF_CRC4	0x04
-#define PC300_FR_MF_NON_CRC4	0x05
-#define PC300_FR_UNFRAMED	0x06
-
-#define PC300_LBO_0_DB		0x00
-#define PC300_LBO_7_5_DB	0x01
-#define PC300_LBO_15_DB		0x02
-#define PC300_LBO_22_5_DB	0x03
-
-#define PC300_RX_SENS_SH	0x01
-#define PC300_RX_SENS_LH	0x02
-
-#define PC300_TX_TIMEOUT	(2*HZ)
-#define PC300_TX_QUEUE_LEN	100
-#define	PC300_DEF_MTU		1600
-
-/* Function Prototypes */
-int cpc_open(struct net_device *dev);
-
-#endif	/* _PC300_H */
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
deleted file mode 100644
index cb0f8d932b0c..000000000000
--- a/drivers/net/wan/pc300_drv.c
+++ /dev/null
@@ -1,3670 +0,0 @@
-#define	USE_PCI_CLOCK
-static const char rcsid[] =
-"Revision: 3.4.5 Date: 2002/03/07 ";
-
-/*
- * pc300.c	Cyclades-PC300(tm) Driver.
- *
- * Author:	Ivan Passos <ivan@cyclades.com>
- * Maintainer:	PC300 Maintainer <pc300@cyclades.com>
- *
- * Copyright:	(c) 1999-2003 Cyclades Corp.
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *	
- *	Using tabstop = 4.
- * 
- * $Log: pc300_drv.c,v $
- * Revision 3.23  2002/03/20 13:58:40  henrique
- * Fixed ortographic mistakes
- *
- * Revision 3.22  2002/03/13 16:56:56  henrique
- * Take out the debug messages
- *
- * Revision 3.21  2002/03/07 14:17:09  henrique
- * License data fixed
- *
- * Revision 3.20  2002/01/17 17:58:52  ivan
- * Support for PC300-TE/M (PMC).
- *
- * Revision 3.19  2002/01/03 17:08:47  daniela
- * Enables DMA reception when the SCA-II disables it improperly.
- *
- * Revision 3.18  2001/12/03 18:47:50  daniela
- * Esthetic changes.
- *
- * Revision 3.17  2001/10/19 16:50:13  henrique
- * Patch to kernel 2.4.12 and new generic hdlc.
- *
- * Revision 3.16  2001/10/16 15:12:31  regina
- * clear statistics
- *
- * Revision 3.11 to 3.15  2001/10/11 20:26:04  daniela
- * More DMA fixes for noisy lines.
- * Return the size of bad frames in dma_get_rx_frame_size, so that the Rx buffer
- * descriptors can be cleaned by dma_buf_read (called in cpc_net_rx).
- * Renamed dma_start routine to rx_dma_start. Improved Rx statistics.
- * Fixed BOF interrupt treatment. Created dma_start routine.
- * Changed min and max to cpc_min and cpc_max.
- *
- * Revision 3.10  2001/08/06 12:01:51  regina
- * Fixed problem in DSR_DE bit.
- *
- * Revision 3.9  2001/07/18 19:27:26  daniela
- * Added some history comments.
- *
- * Revision 3.8  2001/07/12 13:11:19  regina
- * bug fix - DCD-OFF in pc300 tty driver
- *
- * Revision 3.3 to 3.7  2001/07/06 15:00:20  daniela
- * Removing kernel 2.4.3 and previous support.
- * DMA transmission bug fix.
- * MTU check in cpc_net_rx fixed.
- * Boot messages reviewed.
- * New configuration parameters (line code, CRC calculation and clock).
- *
- * Revision 3.2 2001/06/22 13:13:02  regina
- * MLPPP implementation. Changed the header of message trace to include
- * the device name. New format : "hdlcX[R/T]: ".
- * Default configuration changed.
- *
- * Revision 3.1 2001/06/15 regina
- * in cpc_queue_xmit, netif_stop_queue is called if don't have free descriptor
- * upping major version number
- *
- * Revision 1.1.1.1  2001/06/13 20:25:04  daniela
- * PC300 initial CVS version (3.4.0-pre1)
- *
- * Revision 3.0.1.2 2001/06/08 daniela
- * Did some changes in the DMA programming implementation to avoid the 
- * occurrence of a SCA-II bug when CDA is accessed during a DMA transfer.
- *
- * Revision 3.0.1.1 2001/05/02 daniela
- * Added kernel 2.4.3 support.
- * 
- * Revision 3.0.1.0 2001/03/13 daniela, henrique
- * Added Frame Relay Support.
- * Driver now uses HDLC generic driver to provide protocol support.
- * 
- * Revision 3.0.0.8 2001/03/02 daniela
- * Fixed ram size detection. 
- * Changed SIOCGPC300CONF ioctl, to give hw information to pc300util.
- * 
- * Revision 3.0.0.7 2001/02/23 daniela
- * netif_stop_queue called before the SCA-II transmition commands in 
- * cpc_queue_xmit, and with interrupts disabled to avoid race conditions with 
- * transmition interrupts.
- * Fixed falc_check_status for Unframed E1.
- * 
- * Revision 3.0.0.6 2000/12/13 daniela
- * Implemented pc300util support: trace, statistics, status and loopback
- * tests for the PC300 TE boards.
- * 
- * Revision 3.0.0.5 2000/12/12 ivan
- * Added support for Unframed E1.
- * Implemented monitor mode.
- * Fixed DCD sensitivity on the second channel.
- * Driver now complies with new PCI kernel architecture.
- *
- * Revision 3.0.0.4 2000/09/28 ivan
- * Implemented DCD sensitivity.
- * Moved hardware-specific open to the end of cpc_open, to avoid race
- * conditions with early reception interrupts.
- * Included code for [request|release]_mem_region().
- * Changed location of pc300.h .
- * Minor code revision (contrib. of Jeff Garzik).
- *
- * Revision 3.0.0.3 2000/07/03 ivan
- * Previous bugfix for the framing errors with external clock made X21
- * boards stop working. This version fixes it.
- *
- * Revision 3.0.0.2 2000/06/23 ivan
- * Revisited cpc_queue_xmit to prevent race conditions on Tx DMA buffer
- * handling when Tx timeouts occur.
- * Revisited Rx statistics.
- * Fixed a bug in the SCA-II programming that would cause framing errors
- * when external clock was configured.
- *
- * Revision 3.0.0.1 2000/05/26 ivan
- * Added logic in the SCA interrupt handler so that no board can monopolize
- * the driver.
- * Request PLX I/O region, although driver doesn't use it, to avoid
- * problems with other drivers accessing it.
- *
- * Revision 3.0.0.0 2000/05/15 ivan
- * Did some changes in the DMA programming implementation to avoid the
- * occurrence of a SCA-II bug in the second channel.
- * Implemented workaround for PLX9050 bug that would cause a system lockup
- * in certain systems, depending on the MMIO addresses allocated to the
- * board.
- * Fixed the FALC chip programming to avoid synchronization problems in the
- * second channel (TE only).
- * Implemented a cleaner and faster Tx DMA descriptor cleanup procedure in
- * cpc_queue_xmit().
- * Changed the built-in driver implementation so that the driver can use the
- * general 'hdlcN' naming convention instead of proprietary device names.
- * Driver load messages are now device-centric, instead of board-centric.
- * Dynamic allocation of net_device structures.
- * Code is now compliant with the new module interface (module_[init|exit]).
- * Make use of the PCI helper functions to access PCI resources.
- *
- * Revision 2.0.0.0 2000/04/15 ivan
- * Added support for the PC300/TE boards (T1/FT1/E1/FE1).
- *
- * Revision 1.1.0.0 2000/02/28 ivan
- * Major changes in the driver architecture.
- * Softnet compliancy implemented.
- * Driver now reports physical instead of virtual memory addresses.
- * Added cpc_change_mtu function.
- *
- * Revision 1.0.0.0 1999/12/16 ivan
- * First official release.
- * Support for 1- and 2-channel boards (which use distinct PCI Device ID's).
- * Support for monolythic installation (i.e., drv built into the kernel).
- * X.25 additional checking when lapb_[dis]connect_request returns an error.
- * SCA programming now covers X.21 as well.
- *
- * Revision 0.3.1.0 1999/11/18 ivan
- * Made X.25 support configuration-dependent (as it depends on external 
- * modules to work).
- * Changed X.25-specific function names to comply with adopted convention.
- * Fixed typos in X.25 functions that would cause compile errors (Daniela).
- * Fixed bug in ch_config that would disable interrupts on a previously 
- * enabled channel if the other channel on the same board was enabled later.
- *
- * Revision 0.3.0.0 1999/11/16 daniela
- * X.25 support.
- *
- * Revision 0.2.3.0 1999/11/15 ivan
- * Function cpc_ch_status now provides more detailed information.
- * Added support for X.21 clock configuration.
- * Changed TNR1 setting in order to prevent Tx FIFO overaccesses by the SCA.
- * Now using PCI clock instead of internal oscillator clock for the SCA.
- *
- * Revision 0.2.2.0 1999/11/10 ivan
- * Changed the *_dma_buf_check functions so that they would print only 
- * the useful info instead of the whole buffer descriptor bank.
- * Fixed bug in cpc_queue_xmit that would eventually crash the system 
- * in case of a packet drop.
- * Implemented TX underrun handling.
- * Improved SCA fine tuning to boost up its performance.
- *
- * Revision 0.2.1.0 1999/11/03 ivan
- * Added functions *dma_buf_pt_init to allow independent initialization 
- * of the next-descr. and DMA buffer pointers on the DMA descriptors.
- * Kernel buffer release and tbusy clearing is now done in the interrupt 
- * handler.
- * Fixed bug in cpc_open that would cause an interface reopen to fail.
- * Added a protocol-specific code section in cpc_net_rx.
- * Removed printk level defs (they might be added back after the beta phase).
- *
- * Revision 0.2.0.0 1999/10/28 ivan
- * Revisited the code so that new protocols can be easily added / supported. 
- *
- * Revision 0.1.0.1 1999/10/20 ivan
- * Mostly "esthetic" changes.
- *
- * Revision 0.1.0.0 1999/10/11 ivan
- * Initial version.
- *
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/net.h>
-#include <linux/skbuff.h>
-#include <linux/if_arp.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/spinlock.h>
-#include <linux/if.h>
-#include <linux/slab.h>
-#include <net/arp.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#include "pc300.h"
-
-#define	CPC_LOCK(card,flags)		\
-		do {						\
-		spin_lock_irqsave(&card->card_lock, flags);	\
-		} while (0)
-
-#define CPC_UNLOCK(card,flags)			\
-		do {							\
-		spin_unlock_irqrestore(&card->card_lock, flags);	\
-		} while (0)
-
-#undef	PC300_DEBUG_PCI
-#undef	PC300_DEBUG_INTR
-#undef	PC300_DEBUG_TX
-#undef	PC300_DEBUG_RX
-#undef	PC300_DEBUG_OTHER
-
-static DEFINE_PCI_DEVICE_TABLE(cpc_pci_dev_id) = {
-	/* PC300/RSV or PC300/X21, 2 chan */
-	{0x120e, 0x300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x300},
-	/* PC300/RSV or PC300/X21, 1 chan */
-	{0x120e, 0x301, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x301},
-	/* PC300/TE, 2 chan */
-	{0x120e, 0x310, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x310},
-	/* PC300/TE, 1 chan */
-	{0x120e, 0x311, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x311},
-	/* PC300/TE-M, 2 chan */
-	{0x120e, 0x320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x320},
-	/* PC300/TE-M, 1 chan */
-	{0x120e, 0x321, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x321},
-	/* End of table */
-	{0,},
-};
-MODULE_DEVICE_TABLE(pci, cpc_pci_dev_id);
-
-#ifndef cpc_min
-#define	cpc_min(a,b)	(((a)<(b))?(a):(b))
-#endif
-#ifndef cpc_max
-#define	cpc_max(a,b)	(((a)>(b))?(a):(b))
-#endif
-
-/* prototypes */
-static void tx_dma_buf_pt_init(pc300_t *, int);
-static void tx_dma_buf_init(pc300_t *, int);
-static void rx_dma_buf_pt_init(pc300_t *, int);
-static void rx_dma_buf_init(pc300_t *, int);
-static void tx_dma_buf_check(pc300_t *, int);
-static void rx_dma_buf_check(pc300_t *, int);
-static irqreturn_t cpc_intr(int, void *);
-static int clock_rate_calc(u32, u32, int *);
-static u32 detect_ram(pc300_t *);
-static void plx_init(pc300_t *);
-static void cpc_trace(struct net_device *, struct sk_buff *, char);
-static int cpc_attach(struct net_device *, unsigned short, unsigned short);
-static int cpc_close(struct net_device *dev);
-
-#ifdef CONFIG_PC300_MLPPP
-void cpc_tty_init(pc300dev_t * dev);
-void cpc_tty_unregister_service(pc300dev_t * pc300dev);
-void cpc_tty_receive(pc300dev_t * pc300dev);
-void cpc_tty_trigger_poll(pc300dev_t * pc300dev);
-#endif
-
-/************************/
-/***   DMA Routines   ***/
-/************************/
-static void tx_dma_buf_pt_init(pc300_t * card, int ch)
-{
-	int i;
-	int ch_factor = ch * N_DMA_TX_BUF;
-	volatile pcsca_bd_t __iomem *ptdescr = (card->hw.rambase
-			               + DMA_TX_BD_BASE + ch_factor * sizeof(pcsca_bd_t));
-
-	for (i = 0; i < N_DMA_TX_BUF; i++, ptdescr++) {
-		cpc_writel(&ptdescr->next, (u32)(DMA_TX_BD_BASE +
-			(ch_factor + ((i + 1) & (N_DMA_TX_BUF - 1))) * sizeof(pcsca_bd_t)));
-		cpc_writel(&ptdescr->ptbuf,
-			   (u32)(DMA_TX_BASE + (ch_factor + i) * BD_DEF_LEN));
-	}
-}
-
-static void tx_dma_buf_init(pc300_t * card, int ch)
-{
-	int i;
-	int ch_factor = ch * N_DMA_TX_BUF;
-	volatile pcsca_bd_t __iomem *ptdescr = (card->hw.rambase
-			       + DMA_TX_BD_BASE + ch_factor * sizeof(pcsca_bd_t));
-
-	for (i = 0; i < N_DMA_TX_BUF; i++, ptdescr++) {
-		memset_io(ptdescr, 0, sizeof(pcsca_bd_t));
-		cpc_writew(&ptdescr->len, 0);
-		cpc_writeb(&ptdescr->status, DST_OSB);
-	}
-	tx_dma_buf_pt_init(card, ch);
-}
-
-static void rx_dma_buf_pt_init(pc300_t * card, int ch)
-{
-	int i;
-	int ch_factor = ch * N_DMA_RX_BUF;
-	volatile pcsca_bd_t __iomem *ptdescr = (card->hw.rambase
-				       + DMA_RX_BD_BASE + ch_factor * sizeof(pcsca_bd_t));
-
-	for (i = 0; i < N_DMA_RX_BUF; i++, ptdescr++) {
-		cpc_writel(&ptdescr->next, (u32)(DMA_RX_BD_BASE +
-			(ch_factor + ((i + 1) & (N_DMA_RX_BUF - 1))) * sizeof(pcsca_bd_t)));
-		cpc_writel(&ptdescr->ptbuf,
-			   (u32)(DMA_RX_BASE + (ch_factor + i) * BD_DEF_LEN));
-	}
-}
-
-static void rx_dma_buf_init(pc300_t * card, int ch)
-{
-	int i;
-	int ch_factor = ch * N_DMA_RX_BUF;
-	volatile pcsca_bd_t __iomem *ptdescr = (card->hw.rambase
-				       + DMA_RX_BD_BASE + ch_factor * sizeof(pcsca_bd_t));
-
-	for (i = 0; i < N_DMA_RX_BUF; i++, ptdescr++) {
-		memset_io(ptdescr, 0, sizeof(pcsca_bd_t));
-		cpc_writew(&ptdescr->len, 0);
-		cpc_writeb(&ptdescr->status, 0);
-	}
-	rx_dma_buf_pt_init(card, ch);
-}
-
-static void tx_dma_buf_check(pc300_t * card, int ch)
-{
-	volatile pcsca_bd_t __iomem *ptdescr;
-	int i;
-	u16 first_bd = card->chan[ch].tx_first_bd;
-	u16 next_bd = card->chan[ch].tx_next_bd;
-
-	printk("#CH%d: f_bd = %d(0x%08zx), n_bd = %d(0x%08zx)\n", ch,
-	       first_bd, TX_BD_ADDR(ch, first_bd),
-	       next_bd, TX_BD_ADDR(ch, next_bd));
-	for (i = first_bd,
-	     ptdescr = (card->hw.rambase + TX_BD_ADDR(ch, first_bd));
-	     i != ((next_bd + 1) & (N_DMA_TX_BUF - 1));
-	     i = (i + 1) & (N_DMA_TX_BUF - 1), 
-		 ptdescr = (card->hw.rambase + TX_BD_ADDR(ch, i))) {
-		printk("\n CH%d TX%d: next=0x%x, ptbuf=0x%x, ST=0x%x, len=%d",
-		       ch, i, cpc_readl(&ptdescr->next),
-		       cpc_readl(&ptdescr->ptbuf),
-		       cpc_readb(&ptdescr->status), cpc_readw(&ptdescr->len));
-	}
-	printk("\n");
-}
-
-#ifdef	PC300_DEBUG_OTHER
-/* Show all TX buffer descriptors */
-static void tx1_dma_buf_check(pc300_t * card, int ch)
-{
-	volatile pcsca_bd_t __iomem *ptdescr;
-	int i;
-	u16 first_bd = card->chan[ch].tx_first_bd;
-	u16 next_bd = card->chan[ch].tx_next_bd;
-	u32 scabase = card->hw.scabase;
-
-	printk ("\nnfree_tx_bd = %d\n", card->chan[ch].nfree_tx_bd);
-	printk("#CH%d: f_bd = %d(0x%08x), n_bd = %d(0x%08x)\n", ch,
-	       first_bd, TX_BD_ADDR(ch, first_bd),
-	       next_bd, TX_BD_ADDR(ch, next_bd));
-	printk("TX_CDA=0x%08x, TX_EDA=0x%08x\n",
-	       cpc_readl(scabase + DTX_REG(CDAL, ch)),
-	       cpc_readl(scabase + DTX_REG(EDAL, ch)));
-	for (i = 0; i < N_DMA_TX_BUF; i++) {
-		ptdescr = (card->hw.rambase + TX_BD_ADDR(ch, i));
-		printk("\n CH%d TX%d: next=0x%x, ptbuf=0x%x, ST=0x%x, len=%d",
-		       ch, i, cpc_readl(&ptdescr->next),
-		       cpc_readl(&ptdescr->ptbuf),
-		       cpc_readb(&ptdescr->status), cpc_readw(&ptdescr->len));
-	}
-	printk("\n");
-}
-#endif
-
-static void rx_dma_buf_check(pc300_t * card, int ch)
-{
-	volatile pcsca_bd_t __iomem *ptdescr;
-	int i;
-	u16 first_bd = card->chan[ch].rx_first_bd;
-	u16 last_bd = card->chan[ch].rx_last_bd;
-	int ch_factor;
-
-	ch_factor = ch * N_DMA_RX_BUF;
-	printk("#CH%d: f_bd = %d, l_bd = %d\n", ch, first_bd, last_bd);
-	for (i = 0, ptdescr = (card->hw.rambase +
-					      DMA_RX_BD_BASE + ch_factor * sizeof(pcsca_bd_t));
-	     i < N_DMA_RX_BUF; i++, ptdescr++) {
-		if (cpc_readb(&ptdescr->status) & DST_OSB)
-			printk ("\n CH%d RX%d: next=0x%x, ptbuf=0x%x, ST=0x%x, len=%d",
-				 ch, i, cpc_readl(&ptdescr->next),
-				 cpc_readl(&ptdescr->ptbuf),
-				 cpc_readb(&ptdescr->status),
-				 cpc_readw(&ptdescr->len));
-	}
-	printk("\n");
-}
-
-static int dma_get_rx_frame_size(pc300_t * card, int ch)
-{
-	volatile pcsca_bd_t __iomem *ptdescr;
-	u16 first_bd = card->chan[ch].rx_first_bd;
-	int rcvd = 0;
-	volatile u8 status;
-
-	ptdescr = (card->hw.rambase + RX_BD_ADDR(ch, first_bd));
-	while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) {
-		rcvd += cpc_readw(&ptdescr->len);
-		first_bd = (first_bd + 1) & (N_DMA_RX_BUF - 1);
-		if ((status & DST_EOM) || (first_bd == card->chan[ch].rx_last_bd)) {
-			/* Return the size of a good frame or incomplete bad frame 
-			* (dma_buf_read will clean the buffer descriptors in this case). */
-			return rcvd;
-		}
-		ptdescr = (card->hw.rambase + cpc_readl(&ptdescr->next));
-	}
-	return -1;
-}
-
-/*
- * dma_buf_write: writes a frame to the Tx DMA buffers
- * NOTE: this function writes one frame at a time.
- */
-static int dma_buf_write(pc300_t *card, int ch, u8 *ptdata, int len)
-{
-	int i, nchar;
-	volatile pcsca_bd_t __iomem *ptdescr;
-	int tosend = len;
-	u8 nbuf = ((len - 1) / BD_DEF_LEN) + 1;
-
-	if (nbuf >= card->chan[ch].nfree_tx_bd) {
-		return -ENOMEM;
-	}
-
-	for (i = 0; i < nbuf; i++) {
-		ptdescr = (card->hw.rambase +
-					  TX_BD_ADDR(ch, card->chan[ch].tx_next_bd));
-		nchar = cpc_min(BD_DEF_LEN, tosend);
-		if (cpc_readb(&ptdescr->status) & DST_OSB) {
-			memcpy_toio((card->hw.rambase + cpc_readl(&ptdescr->ptbuf)),
-				    &ptdata[len - tosend], nchar);
-			cpc_writew(&ptdescr->len, nchar);
-			card->chan[ch].nfree_tx_bd--;
-			if ((i + 1) == nbuf) {
-				/* This must be the last BD to be used */
-				cpc_writeb(&ptdescr->status, DST_EOM);
-			} else {
-				cpc_writeb(&ptdescr->status, 0);
-			}
-		} else {
-			return -ENOMEM;
-		}
-		tosend -= nchar;
-		card->chan[ch].tx_next_bd =
-			(card->chan[ch].tx_next_bd + 1) & (N_DMA_TX_BUF - 1);
-	}
-	/* If it gets to here, it means we have sent the whole frame */
-	return 0;
-}
-
-/*
- * dma_buf_read: reads a frame from the Rx DMA buffers
- * NOTE: this function reads one frame at a time.
- */
-static int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb)
-{
-	int nchar;
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	volatile pcsca_bd_t __iomem *ptdescr;
-	int rcvd = 0;
-	volatile u8 status;
-
-	ptdescr = (card->hw.rambase +
-				  RX_BD_ADDR(ch, chan->rx_first_bd));
-	while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) {
-		nchar = cpc_readw(&ptdescr->len);
-		if ((status & (DST_OVR | DST_CRC | DST_RBIT | DST_SHRT | DST_ABT)) ||
-		    (nchar > BD_DEF_LEN)) {
-
-			if (nchar > BD_DEF_LEN)
-				status |= DST_RBIT;
-			rcvd = -status;
-			/* Discard remaining descriptors used by the bad frame */
-			while (chan->rx_first_bd != chan->rx_last_bd) {
-				cpc_writeb(&ptdescr->status, 0);
-				chan->rx_first_bd = (chan->rx_first_bd+1) & (N_DMA_RX_BUF-1);
-				if (status & DST_EOM)
-					break;
-				ptdescr = (card->hw.rambase +
-							  cpc_readl(&ptdescr->next));
-				status = cpc_readb(&ptdescr->status);
-			}
-			break;
-		}
-		if (nchar != 0) {
-			if (skb) {
-				memcpy_fromio(skb_put(skb, nchar),
-				 (card->hw.rambase+cpc_readl(&ptdescr->ptbuf)),nchar);
-			}
-			rcvd += nchar;
-		}
-		cpc_writeb(&ptdescr->status, 0);
-		cpc_writeb(&ptdescr->len, 0);
-		chan->rx_first_bd = (chan->rx_first_bd + 1) & (N_DMA_RX_BUF - 1);
-
-		if (status & DST_EOM)
-			break;
-
-		ptdescr = (card->hw.rambase + cpc_readl(&ptdescr->next));
-	}
-
-	if (rcvd != 0) {
-		/* Update pointer */
-		chan->rx_last_bd = (chan->rx_first_bd - 1) & (N_DMA_RX_BUF - 1);
-		/* Update EDA */
-		cpc_writel(card->hw.scabase + DRX_REG(EDAL, ch),
-			   RX_BD_ADDR(ch, chan->rx_last_bd));
-	}
-	return rcvd;
-}
-
-static void tx_dma_stop(pc300_t * card, int ch)
-{
-	void __iomem *scabase = card->hw.scabase;
-	u8 drr_ena_bit = 1 << (5 + 2 * ch);
-	u8 drr_rst_bit = 1 << (1 + 2 * ch);
-
-	/* Disable DMA */
-	cpc_writeb(scabase + DRR, drr_ena_bit);
-	cpc_writeb(scabase + DRR, drr_rst_bit & ~drr_ena_bit);
-}
-
-static void rx_dma_stop(pc300_t * card, int ch)
-{
-	void __iomem *scabase = card->hw.scabase;
-	u8 drr_ena_bit = 1 << (4 + 2 * ch);
-	u8 drr_rst_bit = 1 << (2 * ch);
-
-	/* Disable DMA */
-	cpc_writeb(scabase + DRR, drr_ena_bit);
-	cpc_writeb(scabase + DRR, drr_rst_bit & ~drr_ena_bit);
-}
-
-static void rx_dma_start(pc300_t * card, int ch)
-{
-	void __iomem *scabase = card->hw.scabase;
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	
-	/* Start DMA */
-	cpc_writel(scabase + DRX_REG(CDAL, ch),
-		   RX_BD_ADDR(ch, chan->rx_first_bd));
-	if (cpc_readl(scabase + DRX_REG(CDAL,ch)) !=
-				  RX_BD_ADDR(ch, chan->rx_first_bd)) {
-		cpc_writel(scabase + DRX_REG(CDAL, ch),
-				   RX_BD_ADDR(ch, chan->rx_first_bd));
-	}
-	cpc_writel(scabase + DRX_REG(EDAL, ch),
-		   RX_BD_ADDR(ch, chan->rx_last_bd));
-	cpc_writew(scabase + DRX_REG(BFLL, ch), BD_DEF_LEN);
-	cpc_writeb(scabase + DSR_RX(ch), DSR_DE);
-	if (!(cpc_readb(scabase + DSR_RX(ch)) & DSR_DE)) {
-	cpc_writeb(scabase + DSR_RX(ch), DSR_DE);
-	}
-}
-
-/*************************/
-/***   FALC Routines   ***/
-/*************************/
-static void falc_issue_cmd(pc300_t *card, int ch, u8 cmd)
-{
-	void __iomem *falcbase = card->hw.falcbase;
-	unsigned long i = 0;
-
-	while (cpc_readb(falcbase + F_REG(SIS, ch)) & SIS_CEC) {
-		if (i++ >= PC300_FALC_MAXLOOP) {
-			printk("%s: FALC command locked(cmd=0x%x).\n",
-			       card->chan[ch].d.name, cmd);
-			break;
-		}
-	}
-	cpc_writeb(falcbase + F_REG(CMDR, ch), cmd);
-}
-
-static void falc_intr_enable(pc300_t * card, int ch)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
-	falc_t *pfalc = (falc_t *) & chan->falc;
-	void __iomem *falcbase = card->hw.falcbase;
-
-	/* Interrupt pins are open-drain */
-	cpc_writeb(falcbase + F_REG(IPC, ch),
-		   cpc_readb(falcbase + F_REG(IPC, ch)) & ~IPC_IC0);
-	/* Conters updated each second */
-	cpc_writeb(falcbase + F_REG(FMR1, ch),
-		   cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_ECM);
-	/* Enable SEC and ES interrupts  */
-	cpc_writeb(falcbase + F_REG(IMR3, ch),
-		   cpc_readb(falcbase + F_REG(IMR3, ch)) & ~(IMR3_SEC | IMR3_ES));
-	if (conf->fr_mode == PC300_FR_UNFRAMED) {
-		cpc_writeb(falcbase + F_REG(IMR4, ch),
-			   cpc_readb(falcbase + F_REG(IMR4, ch)) & ~(IMR4_LOS));
-	} else {
-		cpc_writeb(falcbase + F_REG(IMR4, ch),
-			   cpc_readb(falcbase + F_REG(IMR4, ch)) &
-			   ~(IMR4_LFA | IMR4_AIS | IMR4_LOS | IMR4_SLIP));
-	}
-	if (conf->media == IF_IFACE_T1) {
-		cpc_writeb(falcbase + F_REG(IMR3, ch),
-			   cpc_readb(falcbase + F_REG(IMR3, ch)) & ~IMR3_LLBSC);
-	} else {
-		cpc_writeb(falcbase + F_REG(IPC, ch),
-			   cpc_readb(falcbase + F_REG(IPC, ch)) | IPC_SCI);
-		if (conf->fr_mode == PC300_FR_UNFRAMED) {
-			cpc_writeb(falcbase + F_REG(IMR2, ch),
-				   cpc_readb(falcbase + F_REG(IMR2, ch)) & ~(IMR2_LOS));
-		} else {
-			cpc_writeb(falcbase + F_REG(IMR2, ch),
-				   cpc_readb(falcbase + F_REG(IMR2, ch)) &
-				   ~(IMR2_FAR | IMR2_LFA | IMR2_AIS | IMR2_LOS));
-			if (pfalc->multiframe_mode) {
-				cpc_writeb(falcbase + F_REG(IMR2, ch),
-					   cpc_readb(falcbase + F_REG(IMR2, ch)) & 
-					   ~(IMR2_T400MS | IMR2_MFAR));
-			} else {
-				cpc_writeb(falcbase + F_REG(IMR2, ch),
-					   cpc_readb(falcbase + F_REG(IMR2, ch)) | 
-					   IMR2_T400MS | IMR2_MFAR);
-			}
-		}
-	}
-}
-
-static void falc_open_timeslot(pc300_t * card, int ch, int timeslot)
-{
-	void __iomem *falcbase = card->hw.falcbase;
-	u8 tshf = card->chan[ch].falc.offset;
-
-	cpc_writeb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch),
-		   cpc_readb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch)) & 
-		   	~(0x80 >> ((timeslot - tshf) & 0x07)));
-	cpc_writeb(falcbase + F_REG((TTR1 + timeslot / 8), ch),
-		   cpc_readb(falcbase + F_REG((TTR1 + timeslot / 8), ch)) | 
-   			(0x80 >> (timeslot & 0x07)));
-	cpc_writeb(falcbase + F_REG((RTR1 + timeslot / 8), ch),
-		   cpc_readb(falcbase + F_REG((RTR1 + timeslot / 8), ch)) | 
-			(0x80 >> (timeslot & 0x07)));
-}
-
-static void falc_close_timeslot(pc300_t * card, int ch, int timeslot)
-{
-	void __iomem *falcbase = card->hw.falcbase;
-	u8 tshf = card->chan[ch].falc.offset;
-
-	cpc_writeb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch),
-		   cpc_readb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch)) | 
-		   (0x80 >> ((timeslot - tshf) & 0x07)));
-	cpc_writeb(falcbase + F_REG((TTR1 + timeslot / 8), ch),
-		   cpc_readb(falcbase + F_REG((TTR1 + timeslot / 8), ch)) & 
-		   ~(0x80 >> (timeslot & 0x07)));
-	cpc_writeb(falcbase + F_REG((RTR1 + timeslot / 8), ch),
-		   cpc_readb(falcbase + F_REG((RTR1 + timeslot / 8), ch)) & 
-		   ~(0x80 >> (timeslot & 0x07)));
-}
-
-static void falc_close_all_timeslots(pc300_t * card, int ch)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
-	void __iomem *falcbase = card->hw.falcbase;
-
-	cpc_writeb(falcbase + F_REG(ICB1, ch), 0xff);
-	cpc_writeb(falcbase + F_REG(TTR1, ch), 0);
-	cpc_writeb(falcbase + F_REG(RTR1, ch), 0);
-	cpc_writeb(falcbase + F_REG(ICB2, ch), 0xff);
-	cpc_writeb(falcbase + F_REG(TTR2, ch), 0);
-	cpc_writeb(falcbase + F_REG(RTR2, ch), 0);
-	cpc_writeb(falcbase + F_REG(ICB3, ch), 0xff);
-	cpc_writeb(falcbase + F_REG(TTR3, ch), 0);
-	cpc_writeb(falcbase + F_REG(RTR3, ch), 0);
-	if (conf->media == IF_IFACE_E1) {
-		cpc_writeb(falcbase + F_REG(ICB4, ch), 0xff);
-		cpc_writeb(falcbase + F_REG(TTR4, ch), 0);
-		cpc_writeb(falcbase + F_REG(RTR4, ch), 0);
-	}
-}
-
-static void falc_open_all_timeslots(pc300_t * card, int ch)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
-	void __iomem *falcbase = card->hw.falcbase;
-
-	cpc_writeb(falcbase + F_REG(ICB1, ch), 0);
-	if (conf->fr_mode == PC300_FR_UNFRAMED) {
-		cpc_writeb(falcbase + F_REG(TTR1, ch), 0xff);
-		cpc_writeb(falcbase + F_REG(RTR1, ch), 0xff);
-	} else {
-		/* Timeslot 0 is never enabled */
-		cpc_writeb(falcbase + F_REG(TTR1, ch), 0x7f);
-		cpc_writeb(falcbase + F_REG(RTR1, ch), 0x7f);
-	}
-	cpc_writeb(falcbase + F_REG(ICB2, ch), 0);
-	cpc_writeb(falcbase + F_REG(TTR2, ch), 0xff);
-	cpc_writeb(falcbase + F_REG(RTR2, ch), 0xff);
-	cpc_writeb(falcbase + F_REG(ICB3, ch), 0);
-	cpc_writeb(falcbase + F_REG(TTR3, ch), 0xff);
-	cpc_writeb(falcbase + F_REG(RTR3, ch), 0xff);
-	if (conf->media == IF_IFACE_E1) {
-		cpc_writeb(falcbase + F_REG(ICB4, ch), 0);
-		cpc_writeb(falcbase + F_REG(TTR4, ch), 0xff);
-		cpc_writeb(falcbase + F_REG(RTR4, ch), 0xff);
-	} else {
-		cpc_writeb(falcbase + F_REG(ICB4, ch), 0xff);
-		cpc_writeb(falcbase + F_REG(TTR4, ch), 0x80);
-		cpc_writeb(falcbase + F_REG(RTR4, ch), 0x80);
-	}
-}
-
-static void falc_init_timeslot(pc300_t * card, int ch)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
-	falc_t *pfalc = (falc_t *) & chan->falc;
-	int tslot;
-
-	for (tslot = 0; tslot < pfalc->num_channels; tslot++) {
-		if (conf->tslot_bitmap & (1 << tslot)) {
-			// Channel enabled
-			falc_open_timeslot(card, ch, tslot + 1);
-		} else {
-			// Channel disabled
-			falc_close_timeslot(card, ch, tslot + 1);
-		}
-	}
-}
-
-static void falc_enable_comm(pc300_t * card, int ch)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	falc_t *pfalc = (falc_t *) & chan->falc;
-
-	if (pfalc->full_bandwidth) {
-		falc_open_all_timeslots(card, ch);
-	} else {
-		falc_init_timeslot(card, ch);
-	}
-	// CTS/DCD ON
-	cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1,
-		   cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) &
-		   ~((CPLD_REG1_FALC_DCD | CPLD_REG1_FALC_CTS) << (2 * ch)));
-}
-
-static void falc_disable_comm(pc300_t * card, int ch)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	falc_t *pfalc = (falc_t *) & chan->falc;
-
-	if (pfalc->loop_active != 2) {
-		falc_close_all_timeslots(card, ch);
-	}
-	// CTS/DCD OFF
-	cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1,
-		   cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) |
-		   ((CPLD_REG1_FALC_DCD | CPLD_REG1_FALC_CTS) << (2 * ch)));
-}
-
-static void falc_init_t1(pc300_t * card, int ch)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
-	falc_t *pfalc = (falc_t *) & chan->falc;
-	void __iomem *falcbase = card->hw.falcbase;
-	u8 dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0);
-
-	/* Switch to T1 mode (PCM 24) */
-	cpc_writeb(falcbase + F_REG(FMR1, ch), FMR1_PMOD);
-
-	/* Wait 20 us for setup */
-	udelay(20);
-
-	/* Transmit Buffer Size (1 frame) */
-	cpc_writeb(falcbase + F_REG(SIC1, ch), SIC1_XBS0);
-
-	/* Clock mode */
-	if (conf->phys_settings.clock_type == CLOCK_INT) { /* Master mode */
-		cpc_writeb(falcbase + F_REG(LIM0, ch),
-			   cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_MAS);
-	} else { /* Slave mode */
-		cpc_writeb(falcbase + F_REG(LIM0, ch),
-			   cpc_readb(falcbase + F_REG(LIM0, ch)) & ~LIM0_MAS);
-		cpc_writeb(falcbase + F_REG(LOOP, ch),
-			   cpc_readb(falcbase + F_REG(LOOP, ch)) & ~LOOP_RTM);
-	}
-
-	cpc_writeb(falcbase + F_REG(IPC, ch), IPC_SCI);
-	cpc_writeb(falcbase + F_REG(FMR0, ch),
-		   cpc_readb(falcbase + F_REG(FMR0, ch)) &
-		   ~(FMR0_XC0 | FMR0_XC1 | FMR0_RC0 | FMR0_RC1));
-
-	switch (conf->lcode) {
-		case PC300_LC_AMI:
-			cpc_writeb(falcbase + F_REG(FMR0, ch),
-				   cpc_readb(falcbase + F_REG(FMR0, ch)) |
-				   FMR0_XC1 | FMR0_RC1);
-			/* Clear Channel register to ON for all channels */
-			cpc_writeb(falcbase + F_REG(CCB1, ch), 0xff);
-			cpc_writeb(falcbase + F_REG(CCB2, ch), 0xff);
-			cpc_writeb(falcbase + F_REG(CCB3, ch), 0xff);
-			break;
-
-		case PC300_LC_B8ZS:
-			cpc_writeb(falcbase + F_REG(FMR0, ch),
-				   cpc_readb(falcbase + F_REG(FMR0, ch)) |
-				   FMR0_XC0 | FMR0_XC1 | FMR0_RC0 | FMR0_RC1);
-			break;
-
-		case PC300_LC_NRZ:
-			cpc_writeb(falcbase + F_REG(FMR0, ch),
-				   cpc_readb(falcbase + F_REG(FMR0, ch)) | 0x00);
-			break;
-	}
-
-	cpc_writeb(falcbase + F_REG(LIM0, ch),
-		   cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_ELOS);
-	cpc_writeb(falcbase + F_REG(LIM0, ch),
-		   cpc_readb(falcbase + F_REG(LIM0, ch)) & ~(LIM0_SCL1 | LIM0_SCL0));
-	/* Set interface mode to 2 MBPS */
-	cpc_writeb(falcbase + F_REG(FMR1, ch),
-		   cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_IMOD);
-
-	switch (conf->fr_mode) {
-		case PC300_FR_ESF:
-			pfalc->multiframe_mode = 0;
-			cpc_writeb(falcbase + F_REG(FMR4, ch),
-				   cpc_readb(falcbase + F_REG(FMR4, ch)) | FMR4_FM1);
-			cpc_writeb(falcbase + F_REG(FMR1, ch),
-				   cpc_readb(falcbase + F_REG(FMR1, ch)) | 
-				   FMR1_CRC | FMR1_EDL);
-			cpc_writeb(falcbase + F_REG(XDL1, ch), 0);
-			cpc_writeb(falcbase + F_REG(XDL2, ch), 0);
-			cpc_writeb(falcbase + F_REG(XDL3, ch), 0);
-			cpc_writeb(falcbase + F_REG(FMR0, ch),
-				   cpc_readb(falcbase + F_REG(FMR0, ch)) & ~FMR0_SRAF);
-			cpc_writeb(falcbase + F_REG(FMR2, ch),
-				   cpc_readb(falcbase + F_REG(FMR2,ch)) | FMR2_MCSP | FMR2_SSP);
-			break;
-
-		case PC300_FR_D4:
-			pfalc->multiframe_mode = 1;
-			cpc_writeb(falcbase + F_REG(FMR4, ch),
-				   cpc_readb(falcbase + F_REG(FMR4, ch)) &
-				   ~(FMR4_FM1 | FMR4_FM0));
-			cpc_writeb(falcbase + F_REG(FMR0, ch),
-				   cpc_readb(falcbase + F_REG(FMR0, ch)) | FMR0_SRAF);
-			cpc_writeb(falcbase + F_REG(FMR2, ch),
-				   cpc_readb(falcbase + F_REG(FMR2, ch)) & ~FMR2_SSP);
-			break;
-	}
-
-	/* Enable Automatic Resynchronization */
-	cpc_writeb(falcbase + F_REG(FMR4, ch),
-		   cpc_readb(falcbase + F_REG(FMR4, ch)) | FMR4_AUTO);
-
-	/* Transmit Automatic Remote Alarm */
-	cpc_writeb(falcbase + F_REG(FMR2, ch),
-		   cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_AXRA);
-
-	/* Channel translation mode 1 : one to one */
-	cpc_writeb(falcbase + F_REG(FMR1, ch),
-		   cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_CTM);
-
-	/* No signaling */
-	cpc_writeb(falcbase + F_REG(FMR1, ch),
-		   cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_SIGM);
-	cpc_writeb(falcbase + F_REG(FMR5, ch),
-		   cpc_readb(falcbase + F_REG(FMR5, ch)) &
-		   ~(FMR5_EIBR | FMR5_SRS));
-	cpc_writeb(falcbase + F_REG(CCR1, ch), 0);
-
-	cpc_writeb(falcbase + F_REG(LIM1, ch),
-		   cpc_readb(falcbase + F_REG(LIM1, ch)) | LIM1_RIL0 | LIM1_RIL1);
-
-	switch (conf->lbo) {
-			/* Provides proper Line Build Out */
-		case PC300_LBO_0_DB:
-			cpc_writeb(falcbase + F_REG(LIM2, ch), (LIM2_LOS1 | dja));
-			cpc_writeb(falcbase + F_REG(XPM0, ch), 0x5a);
-			cpc_writeb(falcbase + F_REG(XPM1, ch), 0x8f);
-			cpc_writeb(falcbase + F_REG(XPM2, ch), 0x20);
-			break;
-		case PC300_LBO_7_5_DB:
-			cpc_writeb(falcbase + F_REG(LIM2, ch), (0x40 | LIM2_LOS1 | dja));
-			cpc_writeb(falcbase + F_REG(XPM0, ch), 0x11);
-			cpc_writeb(falcbase + F_REG(XPM1, ch), 0x02);
-			cpc_writeb(falcbase + F_REG(XPM2, ch), 0x20);
-			break;
-		case PC300_LBO_15_DB:
-			cpc_writeb(falcbase + F_REG(LIM2, ch), (0x80 | LIM2_LOS1 | dja));
-			cpc_writeb(falcbase + F_REG(XPM0, ch), 0x8e);
-			cpc_writeb(falcbase + F_REG(XPM1, ch), 0x01);
-			cpc_writeb(falcbase + F_REG(XPM2, ch), 0x20);
-			break;
-		case PC300_LBO_22_5_DB:
-			cpc_writeb(falcbase + F_REG(LIM2, ch), (0xc0 | LIM2_LOS1 | dja));
-			cpc_writeb(falcbase + F_REG(XPM0, ch), 0x09);
-			cpc_writeb(falcbase + F_REG(XPM1, ch), 0x01);
-			cpc_writeb(falcbase + F_REG(XPM2, ch), 0x20);
-			break;
-	}
-
-	/* Transmit Clock-Slot Offset */
-	cpc_writeb(falcbase + F_REG(XC0, ch),
-		   cpc_readb(falcbase + F_REG(XC0, ch)) | 0x01);
-	/* Transmit Time-slot Offset */
-	cpc_writeb(falcbase + F_REG(XC1, ch), 0x3e);
-	/* Receive  Clock-Slot offset */
-	cpc_writeb(falcbase + F_REG(RC0, ch), 0x05);
-	/* Receive  Time-slot offset */
-	cpc_writeb(falcbase + F_REG(RC1, ch), 0x00);
-
-	/* LOS Detection after 176 consecutive 0s */
-	cpc_writeb(falcbase + F_REG(PCDR, ch), 0x0a);
-	/* LOS Recovery after 22 ones in the time window of PCD */
-	cpc_writeb(falcbase + F_REG(PCRR, ch), 0x15);
-
-	cpc_writeb(falcbase + F_REG(IDLE, ch), 0x7f);
-
-	if (conf->fr_mode == PC300_FR_ESF_JAPAN) {
-		cpc_writeb(falcbase + F_REG(RC1, ch),
-			   cpc_readb(falcbase + F_REG(RC1, ch)) | 0x80);
-	}
-
-	falc_close_all_timeslots(card, ch);
-}
-
-static void falc_init_e1(pc300_t * card, int ch)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
-	falc_t *pfalc = (falc_t *) & chan->falc;
-	void __iomem *falcbase = card->hw.falcbase;
-	u8 dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0);
-
-	/* Switch to E1 mode (PCM 30) */
-	cpc_writeb(falcbase + F_REG(FMR1, ch),
-		   cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_PMOD);
-
-	/* Clock mode */
-	if (conf->phys_settings.clock_type == CLOCK_INT) { /* Master mode */
-		cpc_writeb(falcbase + F_REG(LIM0, ch),
-			   cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_MAS);
-	} else { /* Slave mode */
-		cpc_writeb(falcbase + F_REG(LIM0, ch),
-			   cpc_readb(falcbase + F_REG(LIM0, ch)) & ~LIM0_MAS);
-	}
-	cpc_writeb(falcbase + F_REG(LOOP, ch),
-		   cpc_readb(falcbase + F_REG(LOOP, ch)) & ~LOOP_SFM);
-
-	cpc_writeb(falcbase + F_REG(IPC, ch), IPC_SCI);
-	cpc_writeb(falcbase + F_REG(FMR0, ch),
-		   cpc_readb(falcbase + F_REG(FMR0, ch)) &
-		   ~(FMR0_XC0 | FMR0_XC1 | FMR0_RC0 | FMR0_RC1));
-
-	switch (conf->lcode) {
-		case PC300_LC_AMI:
-			cpc_writeb(falcbase + F_REG(FMR0, ch),
-				   cpc_readb(falcbase + F_REG(FMR0, ch)) |
-				   FMR0_XC1 | FMR0_RC1);
-			break;
-
-		case PC300_LC_HDB3:
-			cpc_writeb(falcbase + F_REG(FMR0, ch),
-				   cpc_readb(falcbase + F_REG(FMR0, ch)) |
-				   FMR0_XC0 | FMR0_XC1 | FMR0_RC0 | FMR0_RC1);
-			break;
-
-		case PC300_LC_NRZ:
-			break;
-	}
-
-	cpc_writeb(falcbase + F_REG(LIM0, ch),
-		   cpc_readb(falcbase + F_REG(LIM0, ch)) & ~(LIM0_SCL1 | LIM0_SCL0));
-	/* Set interface mode to 2 MBPS */
-	cpc_writeb(falcbase + F_REG(FMR1, ch),
-		   cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_IMOD);
-
-	cpc_writeb(falcbase + F_REG(XPM0, ch), 0x18);
-	cpc_writeb(falcbase + F_REG(XPM1, ch), 0x03);
-	cpc_writeb(falcbase + F_REG(XPM2, ch), 0x00);
-
-	switch (conf->fr_mode) {
-		case PC300_FR_MF_CRC4:
-			pfalc->multiframe_mode = 1;
-			cpc_writeb(falcbase + F_REG(FMR1, ch),
-				   cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_XFS);
-			cpc_writeb(falcbase + F_REG(FMR2, ch),
-				   cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_RFS1);
-			cpc_writeb(falcbase + F_REG(FMR2, ch),
-				   cpc_readb(falcbase + F_REG(FMR2, ch)) & ~FMR2_RFS0);
-			cpc_writeb(falcbase + F_REG(FMR3, ch),
-				   cpc_readb(falcbase + F_REG(FMR3, ch)) & ~FMR3_EXTIW);
-
-			/* MultiFrame Resynchronization */
-			cpc_writeb(falcbase + F_REG(FMR1, ch),
-				   cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_MFCS);
-
-			/* Automatic Loss of Multiframe > 914 CRC errors */
-			cpc_writeb(falcbase + F_REG(FMR2, ch),
-				   cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_ALMF);
-
-			/* S1 and SI1/SI2 spare Bits set to 1 */
-			cpc_writeb(falcbase + F_REG(XSP, ch),
-				   cpc_readb(falcbase + F_REG(XSP, ch)) & ~XSP_AXS);
-			cpc_writeb(falcbase + F_REG(XSP, ch),
-				   cpc_readb(falcbase + F_REG(XSP, ch)) | XSP_EBP);
-			cpc_writeb(falcbase + F_REG(XSP, ch),
-				   cpc_readb(falcbase + F_REG(XSP, ch)) | XSP_XS13 | XSP_XS15);
-
-			/* Automatic Force Resynchronization */
-			cpc_writeb(falcbase + F_REG(FMR1, ch),
-				   cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_AFR);
-
-			/* Transmit Automatic Remote Alarm */
-			cpc_writeb(falcbase + F_REG(FMR2, ch),
-				   cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_AXRA);
-
-			/* Transmit Spare Bits for National Use (Y, Sn, Sa) */
-			cpc_writeb(falcbase + F_REG(XSW, ch),
-				   cpc_readb(falcbase + F_REG(XSW, ch)) |
-				   XSW_XY0 | XSW_XY1 | XSW_XY2 | XSW_XY3 | XSW_XY4);
-			break;
-
-		case PC300_FR_MF_NON_CRC4:
-		case PC300_FR_D4:
-			pfalc->multiframe_mode = 0;
-			cpc_writeb(falcbase + F_REG(FMR1, ch),
-				   cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_XFS);
-			cpc_writeb(falcbase + F_REG(FMR2, ch),
-				   cpc_readb(falcbase + F_REG(FMR2, ch)) & 
-				   ~(FMR2_RFS1 | FMR2_RFS0));
-			cpc_writeb(falcbase + F_REG(XSW, ch),
-				   cpc_readb(falcbase + F_REG(XSW, ch)) | XSW_XSIS);
-			cpc_writeb(falcbase + F_REG(XSP, ch),
-				   cpc_readb(falcbase + F_REG(XSP, ch)) | XSP_XSIF);
-
-			/* Automatic Force Resynchronization */
-			cpc_writeb(falcbase + F_REG(FMR1, ch),
-				   cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_AFR);
-
-			/* Transmit Automatic Remote Alarm */
-			cpc_writeb(falcbase + F_REG(FMR2, ch),
-				   cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_AXRA);
-
-			/* Transmit Spare Bits for National Use (Y, Sn, Sa) */
-			cpc_writeb(falcbase + F_REG(XSW, ch),
-				   cpc_readb(falcbase + F_REG(XSW, ch)) |
-				   XSW_XY0 | XSW_XY1 | XSW_XY2 | XSW_XY3 | XSW_XY4);
-			break;
-
-		case PC300_FR_UNFRAMED:
-			pfalc->multiframe_mode = 0;
-			cpc_writeb(falcbase + F_REG(FMR1, ch),
-				   cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_XFS);
-			cpc_writeb(falcbase + F_REG(FMR2, ch),
-				   cpc_readb(falcbase + F_REG(FMR2, ch)) & 
-				   ~(FMR2_RFS1 | FMR2_RFS0));
-			cpc_writeb(falcbase + F_REG(XSP, ch),
-				   cpc_readb(falcbase + F_REG(XSP, ch)) | XSP_TT0);
-			cpc_writeb(falcbase + F_REG(XSW, ch),
-				   cpc_readb(falcbase + F_REG(XSW, ch)) & 
-				   ~(XSW_XTM|XSW_XY0|XSW_XY1|XSW_XY2|XSW_XY3|XSW_XY4));
-			cpc_writeb(falcbase + F_REG(TSWM, ch), 0xff);
-			cpc_writeb(falcbase + F_REG(FMR2, ch),
-				   cpc_readb(falcbase + F_REG(FMR2, ch)) |
-				   (FMR2_RTM | FMR2_DAIS));
-			cpc_writeb(falcbase + F_REG(FMR2, ch),
-				   cpc_readb(falcbase + F_REG(FMR2, ch)) & ~FMR2_AXRA);
-			cpc_writeb(falcbase + F_REG(FMR1, ch),
-				   cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_AFR);
-			pfalc->sync = 1;
-			cpc_writeb(falcbase + card->hw.cpld_reg2,
-				   cpc_readb(falcbase + card->hw.cpld_reg2) |
-				   (CPLD_REG2_FALC_LED2 << (2 * ch)));
-			break;
-	}
-
-	/* No signaling */
-	cpc_writeb(falcbase + F_REG(XSP, ch),
-		   cpc_readb(falcbase + F_REG(XSP, ch)) & ~XSP_CASEN);
-	cpc_writeb(falcbase + F_REG(CCR1, ch), 0);
-
-	cpc_writeb(falcbase + F_REG(LIM1, ch),
-		   cpc_readb(falcbase + F_REG(LIM1, ch)) | LIM1_RIL0 | LIM1_RIL1);
-	cpc_writeb(falcbase + F_REG(LIM2, ch), (LIM2_LOS1 | dja));
-
-	/* Transmit Clock-Slot Offset */
-	cpc_writeb(falcbase + F_REG(XC0, ch),
-		   cpc_readb(falcbase + F_REG(XC0, ch)) | 0x01);
-	/* Transmit Time-slot Offset */
-	cpc_writeb(falcbase + F_REG(XC1, ch), 0x3e);
-	/* Receive  Clock-Slot offset */
-	cpc_writeb(falcbase + F_REG(RC0, ch), 0x05);
-	/* Receive  Time-slot offset */
-	cpc_writeb(falcbase + F_REG(RC1, ch), 0x00);
-
-	/* LOS Detection after 176 consecutive 0s */
-	cpc_writeb(falcbase + F_REG(PCDR, ch), 0x0a);
-	/* LOS Recovery after 22 ones in the time window of PCD */
-	cpc_writeb(falcbase + F_REG(PCRR, ch), 0x15);
-
-	cpc_writeb(falcbase + F_REG(IDLE, ch), 0x7f);
-
-	falc_close_all_timeslots(card, ch);
-}
-
-static void falc_init_hdlc(pc300_t * card, int ch)
-{
-	void __iomem *falcbase = card->hw.falcbase;
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
-
-	/* Enable transparent data transfer */
-	if (conf->fr_mode == PC300_FR_UNFRAMED) {
-		cpc_writeb(falcbase + F_REG(MODE, ch), 0);
-	} else {
-		cpc_writeb(falcbase + F_REG(MODE, ch),
-			   cpc_readb(falcbase + F_REG(MODE, ch)) |
-			   (MODE_HRAC | MODE_MDS2));
-		cpc_writeb(falcbase + F_REG(RAH2, ch), 0xff);
-		cpc_writeb(falcbase + F_REG(RAH1, ch), 0xff);
-		cpc_writeb(falcbase + F_REG(RAL2, ch), 0xff);
-		cpc_writeb(falcbase + F_REG(RAL1, ch), 0xff);
-	}
-
-	/* Tx/Rx reset  */
-	falc_issue_cmd(card, ch, CMDR_RRES | CMDR_XRES | CMDR_SRES);
-
-	/* Enable interrupt sources */
-	falc_intr_enable(card, ch);
-}
-
-static void te_config(pc300_t * card, int ch)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
-	falc_t *pfalc = (falc_t *) & chan->falc;
-	void __iomem *falcbase = card->hw.falcbase;
-	u8 dummy;
-	unsigned long flags;
-
-	memset(pfalc, 0, sizeof(falc_t));
-	switch (conf->media) {
-		case IF_IFACE_T1:
-			pfalc->num_channels = NUM_OF_T1_CHANNELS;
-			pfalc->offset = 1;
-			break;
-		case IF_IFACE_E1:
-			pfalc->num_channels = NUM_OF_E1_CHANNELS;
-			pfalc->offset = 0;
-			break;
-	}
-	if (conf->tslot_bitmap == 0xffffffffUL)
-		pfalc->full_bandwidth = 1;
-	else
-		pfalc->full_bandwidth = 0;
-
-	CPC_LOCK(card, flags);
-	/* Reset the FALC chip */
-	cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1,
-		   cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) |
-		   (CPLD_REG1_FALC_RESET << (2 * ch)));
-	udelay(10000);
-	cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1,
-		   cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) &
-		   ~(CPLD_REG1_FALC_RESET << (2 * ch)));
-
-	if (conf->media == IF_IFACE_T1) {
-		falc_init_t1(card, ch);
-	} else {
-		falc_init_e1(card, ch);
-	}
-	falc_init_hdlc(card, ch);
-	if (conf->rx_sens == PC300_RX_SENS_SH) {
-		cpc_writeb(falcbase + F_REG(LIM0, ch),
-			   cpc_readb(falcbase + F_REG(LIM0, ch)) & ~LIM0_EQON);
-	} else {
-		cpc_writeb(falcbase + F_REG(LIM0, ch),
-			   cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_EQON);
-	}
-	cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2,
-		   cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) |
-		   ((CPLD_REG2_FALC_TX_CLK | CPLD_REG2_FALC_RX_CLK) << (2 * ch)));
-
-	/* Clear all interrupt registers */
-	dummy = cpc_readb(falcbase + F_REG(FISR0, ch)) +
-		cpc_readb(falcbase + F_REG(FISR1, ch)) +
-		cpc_readb(falcbase + F_REG(FISR2, ch)) +
-		cpc_readb(falcbase + F_REG(FISR3, ch));
-	CPC_UNLOCK(card, flags);
-}
-
-static void falc_check_status(pc300_t * card, int ch, unsigned char frs0)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
-	falc_t *pfalc = (falc_t *) & chan->falc;
-	void __iomem *falcbase = card->hw.falcbase;
-
-	/* Verify LOS */
-	if (frs0 & FRS0_LOS) {
-		if (!pfalc->red_alarm) {
-			pfalc->red_alarm = 1;
-			pfalc->los++;
-			if (!pfalc->blue_alarm) {
-				// EVENT_FALC_ABNORMAL
-				if (conf->media == IF_IFACE_T1) {
-					/* Disable this interrupt as it may otherwise interfere 
-					 * with other working boards. */
-					cpc_writeb(falcbase + F_REG(IMR0, ch), 
-						   cpc_readb(falcbase + F_REG(IMR0, ch))
-						   | IMR0_PDEN);
-				}
-				falc_disable_comm(card, ch);
-				// EVENT_FALC_ABNORMAL
-			}
-		}
-	} else {
-		if (pfalc->red_alarm) {
-			pfalc->red_alarm = 0;
-			pfalc->losr++;
-		}
-	}
-
-	if (conf->fr_mode != PC300_FR_UNFRAMED) {
-		/* Verify AIS alarm */
-		if (frs0 & FRS0_AIS) {
-			if (!pfalc->blue_alarm) {
-				pfalc->blue_alarm = 1;
-				pfalc->ais++;
-				// EVENT_AIS
-				if (conf->media == IF_IFACE_T1) {
-					/* Disable this interrupt as it may otherwise interfere with                       other working boards. */
-					cpc_writeb(falcbase + F_REG(IMR0, ch),
-						   cpc_readb(falcbase + F_REG(IMR0, ch)) | IMR0_PDEN);
-				}
-				falc_disable_comm(card, ch);
-				// EVENT_AIS
-			}
-		} else {
-			pfalc->blue_alarm = 0;
-		}
-
-		/* Verify LFA */
-		if (frs0 & FRS0_LFA) {
-			if (!pfalc->loss_fa) {
-				pfalc->loss_fa = 1;
-				pfalc->lfa++;
-				if (!pfalc->blue_alarm && !pfalc->red_alarm) {
-					// EVENT_FALC_ABNORMAL
-					if (conf->media == IF_IFACE_T1) {
-						/* Disable this interrupt as it may otherwise 
-						 * interfere with other working boards. */
-						cpc_writeb(falcbase + F_REG(IMR0, ch),
-							   cpc_readb(falcbase + F_REG(IMR0, ch))
-							   | IMR0_PDEN);
-					}
-					falc_disable_comm(card, ch);
-					// EVENT_FALC_ABNORMAL
-				}
-			}
-		} else {
-			if (pfalc->loss_fa) {
-				pfalc->loss_fa = 0;
-				pfalc->farec++;
-			}
-		}
-
-		/* Verify LMFA */
-		if (pfalc->multiframe_mode && (frs0 & FRS0_LMFA)) {
-			/* D4 or CRC4 frame mode */
-			if (!pfalc->loss_mfa) {
-				pfalc->loss_mfa = 1;
-				pfalc->lmfa++;
-				if (!pfalc->blue_alarm && !pfalc->red_alarm &&
-				    !pfalc->loss_fa) {
-					// EVENT_FALC_ABNORMAL
-					if (conf->media == IF_IFACE_T1) {
-						/* Disable this interrupt as it may otherwise 
-						 * interfere with other working boards. */
-						cpc_writeb(falcbase + F_REG(IMR0, ch),
-							   cpc_readb(falcbase + F_REG(IMR0, ch))
-							   | IMR0_PDEN);
-					}
-					falc_disable_comm(card, ch);
-					// EVENT_FALC_ABNORMAL
-				}
-			}
-		} else {
-			pfalc->loss_mfa = 0;
-		}
-
-		/* Verify Remote Alarm */
-		if (frs0 & FRS0_RRA) {
-			if (!pfalc->yellow_alarm) {
-				pfalc->yellow_alarm = 1;
-				pfalc->rai++;
-				if (pfalc->sync) {
-					// EVENT_RAI
-					falc_disable_comm(card, ch);
-					// EVENT_RAI
-				}
-			}
-		} else {
-			pfalc->yellow_alarm = 0;
-		}
-	} /* if !PC300_UNFRAMED */
-
-	if (pfalc->red_alarm || pfalc->loss_fa ||
-	    pfalc->loss_mfa || pfalc->blue_alarm) {
-		if (pfalc->sync) {
-			pfalc->sync = 0;
-			chan->d.line_off++;
-			cpc_writeb(falcbase + card->hw.cpld_reg2,
-				   cpc_readb(falcbase + card->hw.cpld_reg2) &
-				   ~(CPLD_REG2_FALC_LED2 << (2 * ch)));
-		}
-	} else {
-		if (!pfalc->sync) {
-			pfalc->sync = 1;
-			chan->d.line_on++;
-			cpc_writeb(falcbase + card->hw.cpld_reg2,
-				   cpc_readb(falcbase + card->hw.cpld_reg2) |
-				   (CPLD_REG2_FALC_LED2 << (2 * ch)));
-		}
-	}
-
-	if (pfalc->sync && !pfalc->yellow_alarm) {
-		if (!pfalc->active) {
-			// EVENT_FALC_NORMAL
-			if (pfalc->loop_active) {
-				return;
-			}
-			if (conf->media == IF_IFACE_T1) {
-				cpc_writeb(falcbase + F_REG(IMR0, ch),
-					   cpc_readb(falcbase + F_REG(IMR0, ch)) & ~IMR0_PDEN);
-			}
-			falc_enable_comm(card, ch);
-			// EVENT_FALC_NORMAL
-			pfalc->active = 1;
-		}
-	} else {
-		if (pfalc->active) {
-			pfalc->active = 0;
-		}
-	}
-}
-
-static void falc_update_stats(pc300_t * card, int ch)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
-	falc_t *pfalc = (falc_t *) & chan->falc;
-	void __iomem *falcbase = card->hw.falcbase;
-	u16 counter;
-
-	counter = cpc_readb(falcbase + F_REG(FECL, ch));
-	counter |= cpc_readb(falcbase + F_REG(FECH, ch)) << 8;
-	pfalc->fec += counter;
-
-	counter = cpc_readb(falcbase + F_REG(CVCL, ch));
-	counter |= cpc_readb(falcbase + F_REG(CVCH, ch)) << 8;
-	pfalc->cvc += counter;
-
-	counter = cpc_readb(falcbase + F_REG(CECL, ch));
-	counter |= cpc_readb(falcbase + F_REG(CECH, ch)) << 8;
-	pfalc->cec += counter;
-
-	counter = cpc_readb(falcbase + F_REG(EBCL, ch));
-	counter |= cpc_readb(falcbase + F_REG(EBCH, ch)) << 8;
-	pfalc->ebc += counter;
-
-	if (cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_EPRM) {
-		mdelay(10);
-		counter = cpc_readb(falcbase + F_REG(BECL, ch));
-		counter |= cpc_readb(falcbase + F_REG(BECH, ch)) << 8;
-		pfalc->bec += counter;
-
-		if (((conf->media == IF_IFACE_T1) &&
-		     (cpc_readb(falcbase + F_REG(FRS1, ch)) & FRS1_LLBAD) &&
-		     (!(cpc_readb(falcbase + F_REG(FRS1, ch)) & FRS1_PDEN))) ||
-		    ((conf->media == IF_IFACE_E1) &&
-		     (cpc_readb(falcbase + F_REG(RSP, ch)) & RSP_LLBAD))) {
-			pfalc->prbs = 2;
-		} else {
-			pfalc->prbs = 1;
-		}
-	}
-}
-
-/*----------------------------------------------------------------------------
- * falc_remote_loop
- *----------------------------------------------------------------------------
- * Description:	In the remote loopback mode the clock and data recovered
- *		from the line inputs RL1/2 or RDIP/RDIN are routed back
- *		to the line outputs XL1/2 or XDOP/XDON via the analog
- *		transmitter. As in normal mode they are processed by
- *		the synchronizer and then sent to the system interface.
- *----------------------------------------------------------------------------
- */
-static void falc_remote_loop(pc300_t * card, int ch, int loop_on)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
-	falc_t *pfalc = (falc_t *) & chan->falc;
-	void __iomem *falcbase = card->hw.falcbase;
-
-	if (loop_on) {
-		// EVENT_FALC_ABNORMAL
-		if (conf->media == IF_IFACE_T1) {
-			/* Disable this interrupt as it may otherwise interfere with 
-			 * other working boards. */
-			cpc_writeb(falcbase + F_REG(IMR0, ch),
-				   cpc_readb(falcbase + F_REG(IMR0, ch)) | IMR0_PDEN);
-		}
-		falc_disable_comm(card, ch);
-		// EVENT_FALC_ABNORMAL
-		cpc_writeb(falcbase + F_REG(LIM1, ch),
-			   cpc_readb(falcbase + F_REG(LIM1, ch)) | LIM1_RL);
-		pfalc->loop_active = 1;
-	} else {
-		cpc_writeb(falcbase + F_REG(LIM1, ch),
-			   cpc_readb(falcbase + F_REG(LIM1, ch)) & ~LIM1_RL);
-		pfalc->sync = 0;
-		cpc_writeb(falcbase + card->hw.cpld_reg2,
-			   cpc_readb(falcbase + card->hw.cpld_reg2) &
-			   ~(CPLD_REG2_FALC_LED2 << (2 * ch)));
-		pfalc->active = 0;
-		falc_issue_cmd(card, ch, CMDR_XRES);
-		pfalc->loop_active = 0;
-	}
-}
-
-/*----------------------------------------------------------------------------
- * falc_local_loop
- *----------------------------------------------------------------------------
- * Description: The local loopback mode disconnects the receive lines 
- *		RL1/RL2 resp. RDIP/RDIN from the receiver. Instead of the
- *		signals coming from the line the data provided by system
- *		interface are routed through the analog receiver back to
- *		the system interface. The unipolar bit stream will be
- *		undisturbed transmitted on the line. Receiver and transmitter
- *		coding must be identical.
- *----------------------------------------------------------------------------
- */
-static void falc_local_loop(pc300_t * card, int ch, int loop_on)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	falc_t *pfalc = (falc_t *) & chan->falc;
-	void __iomem *falcbase = card->hw.falcbase;
-
-	if (loop_on) {
-		cpc_writeb(falcbase + F_REG(LIM0, ch),
-			   cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_LL);
-		pfalc->loop_active = 1;
-	} else {
-		cpc_writeb(falcbase + F_REG(LIM0, ch),
-			   cpc_readb(falcbase + F_REG(LIM0, ch)) & ~LIM0_LL);
-		pfalc->loop_active = 0;
-	}
-}
-
-/*----------------------------------------------------------------------------
- * falc_payload_loop
- *----------------------------------------------------------------------------
- * Description: This routine allows to enable/disable payload loopback.
- *		When the payload loop is activated, the received 192 bits
- *		of payload data will be looped back to the transmit
- *		direction. The framing bits, CRC6 and DL bits are not 
- *		looped. They are originated by the FALC-LH transmitter.
- *----------------------------------------------------------------------------
- */
-static void falc_payload_loop(pc300_t * card, int ch, int loop_on)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
-	falc_t *pfalc = (falc_t *) & chan->falc;
-	void __iomem *falcbase = card->hw.falcbase;
-
-	if (loop_on) {
-		// EVENT_FALC_ABNORMAL
-		if (conf->media == IF_IFACE_T1) {
-			/* Disable this interrupt as it may otherwise interfere with 
-			 * other working boards. */
-			cpc_writeb(falcbase + F_REG(IMR0, ch),
-				   cpc_readb(falcbase + F_REG(IMR0, ch)) | IMR0_PDEN);
-		}
-		falc_disable_comm(card, ch);
-		// EVENT_FALC_ABNORMAL
-		cpc_writeb(falcbase + F_REG(FMR2, ch),
-			   cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_PLB);
-		if (conf->media == IF_IFACE_T1) {
-			cpc_writeb(falcbase + F_REG(FMR4, ch),
-				   cpc_readb(falcbase + F_REG(FMR4, ch)) | FMR4_TM);
-		} else {
-			cpc_writeb(falcbase + F_REG(FMR5, ch),
-				   cpc_readb(falcbase + F_REG(FMR5, ch)) | XSP_TT0);
-		}
-		falc_open_all_timeslots(card, ch);
-		pfalc->loop_active = 2;
-	} else {
-		cpc_writeb(falcbase + F_REG(FMR2, ch),
-			   cpc_readb(falcbase + F_REG(FMR2, ch)) & ~FMR2_PLB);
-		if (conf->media == IF_IFACE_T1) {
-			cpc_writeb(falcbase + F_REG(FMR4, ch),
-				   cpc_readb(falcbase + F_REG(FMR4, ch)) & ~FMR4_TM);
-		} else {
-			cpc_writeb(falcbase + F_REG(FMR5, ch),
-				   cpc_readb(falcbase + F_REG(FMR5, ch)) & ~XSP_TT0);
-		}
-		pfalc->sync = 0;
-		cpc_writeb(falcbase + card->hw.cpld_reg2,
-			   cpc_readb(falcbase + card->hw.cpld_reg2) &
-			   ~(CPLD_REG2_FALC_LED2 << (2 * ch)));
-		pfalc->active = 0;
-		falc_issue_cmd(card, ch, CMDR_XRES);
-		pfalc->loop_active = 0;
-	}
-}
-
-/*----------------------------------------------------------------------------
- * turn_off_xlu
- *----------------------------------------------------------------------------
- * Description:	Turns XLU bit off in the proper register
- *----------------------------------------------------------------------------
- */
-static void turn_off_xlu(pc300_t * card, int ch)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
-	void __iomem *falcbase = card->hw.falcbase;
-
-	if (conf->media == IF_IFACE_T1) {
-		cpc_writeb(falcbase + F_REG(FMR5, ch),
-			   cpc_readb(falcbase + F_REG(FMR5, ch)) & ~FMR5_XLU);
-	} else {
-		cpc_writeb(falcbase + F_REG(FMR3, ch),
-			   cpc_readb(falcbase + F_REG(FMR3, ch)) & ~FMR3_XLU);
-	}
-}
-
-/*----------------------------------------------------------------------------
- * turn_off_xld
- *----------------------------------------------------------------------------
- * Description: Turns XLD bit off in the proper register
- *----------------------------------------------------------------------------
- */
-static void turn_off_xld(pc300_t * card, int ch)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
-	void __iomem *falcbase = card->hw.falcbase;
-
-	if (conf->media == IF_IFACE_T1) {
-		cpc_writeb(falcbase + F_REG(FMR5, ch),
-			   cpc_readb(falcbase + F_REG(FMR5, ch)) & ~FMR5_XLD);
-	} else {
-		cpc_writeb(falcbase + F_REG(FMR3, ch),
-			   cpc_readb(falcbase + F_REG(FMR3, ch)) & ~FMR3_XLD);
-	}
-}
-
-/*----------------------------------------------------------------------------
- * falc_generate_loop_up_code
- *----------------------------------------------------------------------------
- * Description:	This routine writes the proper FALC chip register in order
- *		to generate a LOOP activation code over a T1/E1 line.
- *----------------------------------------------------------------------------
- */
-static void falc_generate_loop_up_code(pc300_t * card, int ch)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
-	falc_t *pfalc = (falc_t *) & chan->falc;
-	void __iomem *falcbase = card->hw.falcbase;
-
-	if (conf->media == IF_IFACE_T1) {
-		cpc_writeb(falcbase + F_REG(FMR5, ch),
-			   cpc_readb(falcbase + F_REG(FMR5, ch)) | FMR5_XLU);
-	} else {
-		cpc_writeb(falcbase + F_REG(FMR3, ch),
-			   cpc_readb(falcbase + F_REG(FMR3, ch)) | FMR3_XLU);
-	}
-	// EVENT_FALC_ABNORMAL
-	if (conf->media == IF_IFACE_T1) {
-		/* Disable this interrupt as it may otherwise interfere with 
-		 * other working boards. */
-		cpc_writeb(falcbase + F_REG(IMR0, ch),
-			   cpc_readb(falcbase + F_REG(IMR0, ch)) | IMR0_PDEN);
-	}
-	falc_disable_comm(card, ch);
-	// EVENT_FALC_ABNORMAL
-	pfalc->loop_gen = 1;
-}
-
-/*----------------------------------------------------------------------------
- * falc_generate_loop_down_code
- *----------------------------------------------------------------------------
- * Description:	This routine writes the proper FALC chip register in order
- *		to generate a LOOP deactivation code over a T1/E1 line.
- *----------------------------------------------------------------------------
- */
-static void falc_generate_loop_down_code(pc300_t * card, int ch)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
-	falc_t *pfalc = (falc_t *) & chan->falc;
-	void __iomem *falcbase = card->hw.falcbase;
-
-	if (conf->media == IF_IFACE_T1) {
-		cpc_writeb(falcbase + F_REG(FMR5, ch),
-			   cpc_readb(falcbase + F_REG(FMR5, ch)) | FMR5_XLD);
-	} else {
-		cpc_writeb(falcbase + F_REG(FMR3, ch),
-			   cpc_readb(falcbase + F_REG(FMR3, ch)) | FMR3_XLD);
-	}
-	pfalc->sync = 0;
-	cpc_writeb(falcbase + card->hw.cpld_reg2,
-		   cpc_readb(falcbase + card->hw.cpld_reg2) &
-		   ~(CPLD_REG2_FALC_LED2 << (2 * ch)));
-	pfalc->active = 0;
-//?    falc_issue_cmd(card, ch, CMDR_XRES);
-	pfalc->loop_gen = 0;
-}
-
-/*----------------------------------------------------------------------------
- * falc_pattern_test
- *----------------------------------------------------------------------------
- * Description:	This routine generates a pattern code and checks
- *		it on the reception side.
- *----------------------------------------------------------------------------
- */
-static void falc_pattern_test(pc300_t * card, int ch, unsigned int activate)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
-	falc_t *pfalc = (falc_t *) & chan->falc;
-	void __iomem *falcbase = card->hw.falcbase;
-
-	if (activate) {
-		pfalc->prbs = 1;
-		pfalc->bec = 0;
-		if (conf->media == IF_IFACE_T1) {
-			/* Disable local loop activation/deactivation detect */
-			cpc_writeb(falcbase + F_REG(IMR3, ch),
-				   cpc_readb(falcbase + F_REG(IMR3, ch)) | IMR3_LLBSC);
-		} else {
-			/* Disable local loop activation/deactivation detect */
-			cpc_writeb(falcbase + F_REG(IMR1, ch),
-				   cpc_readb(falcbase + F_REG(IMR1, ch)) | IMR1_LLBSC);
-		}
-		/* Activates generation and monitoring of PRBS 
-		 * (Pseudo Random Bit Sequence) */
-		cpc_writeb(falcbase + F_REG(LCR1, ch),
-			   cpc_readb(falcbase + F_REG(LCR1, ch)) | LCR1_EPRM | LCR1_XPRBS);
-	} else {
-		pfalc->prbs = 0;
-		/* Deactivates generation and monitoring of PRBS 
-		 * (Pseudo Random Bit Sequence) */
-		cpc_writeb(falcbase + F_REG(LCR1, ch),
-			   cpc_readb(falcbase+F_REG(LCR1,ch)) & ~(LCR1_EPRM | LCR1_XPRBS));
-		if (conf->media == IF_IFACE_T1) {
-			/* Enable local loop activation/deactivation detect */
-			cpc_writeb(falcbase + F_REG(IMR3, ch),
-				   cpc_readb(falcbase + F_REG(IMR3, ch)) & ~IMR3_LLBSC);
-		} else {
-			/* Enable local loop activation/deactivation detect */
-			cpc_writeb(falcbase + F_REG(IMR1, ch),
-				   cpc_readb(falcbase + F_REG(IMR1, ch)) & ~IMR1_LLBSC);
-		}
-	}
-}
-
-/*----------------------------------------------------------------------------
- * falc_pattern_test_error
- *----------------------------------------------------------------------------
- * Description:	This routine returns the bit error counter value
- *----------------------------------------------------------------------------
- */
-static u16 falc_pattern_test_error(pc300_t * card, int ch)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	falc_t *pfalc = (falc_t *) & chan->falc;
-
-	return pfalc->bec;
-}
-
-/**********************************/
-/***   Net Interface Routines   ***/
-/**********************************/
-
-static void
-cpc_trace(struct net_device *dev, struct sk_buff *skb_main, char rx_tx)
-{
-	struct sk_buff *skb;
-
-	if ((skb = dev_alloc_skb(10 + skb_main->len)) == NULL) {
-		printk("%s: out of memory\n", dev->name);
-		return;
-	}
-	skb_put(skb, 10 + skb_main->len);
-
-	skb->dev = dev;
-	skb->protocol = htons(ETH_P_CUST);
-	skb_reset_mac_header(skb);
-	skb->pkt_type = PACKET_HOST;
-	skb->len = 10 + skb_main->len;
-
-	skb_copy_to_linear_data(skb, dev->name, 5);
-	skb->data[5] = '[';
-	skb->data[6] = rx_tx;
-	skb->data[7] = ']';
-	skb->data[8] = ':';
-	skb->data[9] = ' ';
-	skb_copy_from_linear_data(skb_main, &skb->data[10], skb_main->len);
-
-	netif_rx(skb);
-}
-
-static void cpc_tx_timeout(struct net_device *dev)
-{
-	pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv;
-	pc300ch_t *chan = (pc300ch_t *) d->chan;
-	pc300_t *card = (pc300_t *) chan->card;
-	int ch = chan->channel;
-	unsigned long flags;
-	u8 ilar;
-
-	dev->stats.tx_errors++;
-	dev->stats.tx_aborted_errors++;
-	CPC_LOCK(card, flags);
-	if ((ilar = cpc_readb(card->hw.scabase + ILAR)) != 0) {
-		printk("%s: ILAR=0x%x\n", dev->name, ilar);
-		cpc_writeb(card->hw.scabase + ILAR, ilar);
-		cpc_writeb(card->hw.scabase + DMER, 0x80);
-	}
-	if (card->hw.type == PC300_TE) {
-		cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2,
-			   cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) &
-			   ~(CPLD_REG2_FALC_LED1 << (2 * ch)));
-	}
-	dev->trans_start = jiffies; /* prevent tx timeout */
-	CPC_UNLOCK(card, flags);
-	netif_wake_queue(dev);
-}
-
-static int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv;
-	pc300ch_t *chan = (pc300ch_t *) d->chan;
-	pc300_t *card = (pc300_t *) chan->card;
-	int ch = chan->channel;
-	unsigned long flags;
-#ifdef PC300_DEBUG_TX
-	int i;
-#endif
-
-	if (!netif_carrier_ok(dev)) {
-		/* DCD must be OFF: drop packet */
-		dev_kfree_skb(skb);
-		dev->stats.tx_errors++;
-		dev->stats.tx_carrier_errors++;
-		return 0;
-	} else if (cpc_readb(card->hw.scabase + M_REG(ST3, ch)) & ST3_DCD) {
-		printk("%s: DCD is OFF. Going administrative down.\n", dev->name);
-		dev->stats.tx_errors++;
-		dev->stats.tx_carrier_errors++;
-		dev_kfree_skb(skb);
-		netif_carrier_off(dev);
-		CPC_LOCK(card, flags);
-		cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_TX_BUF_CLR);
-		if (card->hw.type == PC300_TE) {
-			cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2,
-				   cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) & 
-				   			~(CPLD_REG2_FALC_LED1 << (2 * ch)));
-		}
-		CPC_UNLOCK(card, flags);
-		netif_wake_queue(dev);
-		return 0;
-	}
-
-	/* Write buffer to DMA buffers */
-	if (dma_buf_write(card, ch, (u8 *)skb->data, skb->len) != 0) {
-//		printk("%s: write error. Dropping TX packet.\n", dev->name);
-		netif_stop_queue(dev);
-		dev_kfree_skb(skb);
-		dev->stats.tx_errors++;
-		dev->stats.tx_dropped++;
-		return 0;
-	}
-#ifdef PC300_DEBUG_TX
-	printk("%s T:", dev->name);
-	for (i = 0; i < skb->len; i++)
-		printk(" %02x", *(skb->data + i));
-	printk("\n");
-#endif
-
-	if (d->trace_on) {
-		cpc_trace(dev, skb, 'T');
-	}
-
-	/* Start transmission */
-	CPC_LOCK(card, flags);
-	/* verify if it has more than one free descriptor */
-	if (card->chan[ch].nfree_tx_bd <= 1) {
-		/* don't have so stop the queue */
-		netif_stop_queue(dev);
-	}
-	cpc_writel(card->hw.scabase + DTX_REG(EDAL, ch),
-		   TX_BD_ADDR(ch, chan->tx_next_bd));
-	cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_TX_ENA);
-	cpc_writeb(card->hw.scabase + DSR_TX(ch), DSR_DE);
-	if (card->hw.type == PC300_TE) {
-		cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2,
-			   cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) |
-			   (CPLD_REG2_FALC_LED1 << (2 * ch)));
-	}
-	CPC_UNLOCK(card, flags);
-	dev_kfree_skb(skb);
-
-	return 0;
-}
-
-static void cpc_net_rx(struct net_device *dev)
-{
-	pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv;
-	pc300ch_t *chan = (pc300ch_t *) d->chan;
-	pc300_t *card = (pc300_t *) chan->card;
-	int ch = chan->channel;
-#ifdef PC300_DEBUG_RX
-	int i;
-#endif
-	int rxb;
-	struct sk_buff *skb;
-
-	while (1) {
-		if ((rxb = dma_get_rx_frame_size(card, ch)) == -1)
-			return;
-
-		if (!netif_carrier_ok(dev)) {
-			/* DCD must be OFF: drop packet */
-		    printk("%s : DCD is OFF - drop %d rx bytes\n", dev->name, rxb); 
-			skb = NULL;
-		} else {
-			if (rxb > (dev->mtu + 40)) { /* add headers */
-				printk("%s : MTU exceeded %d\n", dev->name, rxb); 
-				skb = NULL;
-			} else {
-				skb = dev_alloc_skb(rxb);
-				if (skb == NULL) {
-					printk("%s: Memory squeeze!!\n", dev->name);
-					return;
-				}
-				skb->dev = dev;
-			}
-		}
-
-		if (((rxb = dma_buf_read(card, ch, skb)) <= 0) || (skb == NULL)) {
-#ifdef PC300_DEBUG_RX
-			printk("%s: rxb = %x\n", dev->name, rxb);
-#endif
-			if ((skb == NULL) && (rxb > 0)) {
-				/* rxb > dev->mtu */
-				dev->stats.rx_errors++;
-				dev->stats.rx_length_errors++;
-				continue;
-			}
-
-			if (rxb < 0) {	/* Invalid frame */
-				rxb = -rxb;
-				if (rxb & DST_OVR) {
-					dev->stats.rx_errors++;
-					dev->stats.rx_fifo_errors++;
-				}
-				if (rxb & DST_CRC) {
-					dev->stats.rx_errors++;
-					dev->stats.rx_crc_errors++;
-				}
-				if (rxb & (DST_RBIT | DST_SHRT | DST_ABT)) {
-					dev->stats.rx_errors++;
-					dev->stats.rx_frame_errors++;
-				}
-			}
-			if (skb) {
-				dev_kfree_skb_irq(skb);
-			}
-			continue;
-		}
-
-		dev->stats.rx_bytes += rxb;
-
-#ifdef PC300_DEBUG_RX
-		printk("%s R:", dev->name);
-		for (i = 0; i < skb->len; i++)
-			printk(" %02x", *(skb->data + i));
-		printk("\n");
-#endif
-		if (d->trace_on) {
-			cpc_trace(dev, skb, 'R');
-		}
-		dev->stats.rx_packets++;
-		skb->protocol = hdlc_type_trans(skb, dev);
-		netif_rx(skb);
-	}
-}
-
-/************************************/
-/***   PC300 Interrupt Routines   ***/
-/************************************/
-static void sca_tx_intr(pc300dev_t *dev)
-{
-	pc300ch_t *chan = (pc300ch_t *)dev->chan; 
-	pc300_t *card = (pc300_t *)chan->card; 
-	int ch = chan->channel; 
-	volatile pcsca_bd_t __iomem * ptdescr; 
-
-    /* Clean up descriptors from previous transmission */
-	ptdescr = (card->hw.rambase +
-						TX_BD_ADDR(ch,chan->tx_first_bd));
-	while ((cpc_readl(card->hw.scabase + DTX_REG(CDAL,ch)) !=
-		TX_BD_ADDR(ch,chan->tx_first_bd)) &&
-	       (cpc_readb(&ptdescr->status) & DST_OSB)) {
-		dev->dev->stats.tx_packets++;
-		dev->dev->stats.tx_bytes += cpc_readw(&ptdescr->len);
-		cpc_writeb(&ptdescr->status, DST_OSB);
-		cpc_writew(&ptdescr->len, 0);
-		chan->nfree_tx_bd++;
-		chan->tx_first_bd = (chan->tx_first_bd + 1) & (N_DMA_TX_BUF - 1);
-		ptdescr = (card->hw.rambase + TX_BD_ADDR(ch,chan->tx_first_bd));
-    }
-
-#ifdef CONFIG_PC300_MLPPP
-	if (chan->conf.proto == PC300_PROTO_MLPPP) {
-			cpc_tty_trigger_poll(dev);
-	} else {
-#endif
-	/* Tell the upper layer we are ready to transmit more packets */
-		netif_wake_queue(dev->dev);
-#ifdef CONFIG_PC300_MLPPP
-	}
-#endif
-}
-
-static void sca_intr(pc300_t * card)
-{
-	void __iomem *scabase = card->hw.scabase;
-	volatile u32 status;
-	int ch;
-	int intr_count = 0;
-	unsigned char dsr_rx;
-
-	while ((status = cpc_readl(scabase + ISR0)) != 0) {
-		for (ch = 0; ch < card->hw.nchan; ch++) {
-			pc300ch_t *chan = &card->chan[ch];
-			pc300dev_t *d = &chan->d;
-			struct net_device *dev = d->dev;
-
-			spin_lock(&card->card_lock);
-
-	    /**** Reception ****/
-			if (status & IR0_DRX((IR0_DMIA | IR0_DMIB), ch)) {
-				u8 drx_stat = cpc_readb(scabase + DSR_RX(ch));
-
-				/* Clear RX interrupts */
-				cpc_writeb(scabase + DSR_RX(ch), drx_stat | DSR_DWE);
-
-#ifdef PC300_DEBUG_INTR
-				printk ("sca_intr: RX intr chan[%d] (st=0x%08lx, dsr=0x%02x)\n",
-					 ch, status, drx_stat);
-#endif
-				if (status & IR0_DRX(IR0_DMIA, ch)) {
-					if (drx_stat & DSR_BOF) {
-#ifdef CONFIG_PC300_MLPPP
-						if (chan->conf.proto == PC300_PROTO_MLPPP) {
-							/* verify if driver is TTY */
-							if ((cpc_readb(scabase + DSR_RX(ch)) & DSR_DE)) {
-								rx_dma_stop(card, ch);
-							}
-							cpc_tty_receive(d);
-							rx_dma_start(card, ch);
-						} else 
-#endif
-						{
-							if ((cpc_readb(scabase + DSR_RX(ch)) & DSR_DE)) {
-								rx_dma_stop(card, ch);
-							}
-							cpc_net_rx(dev);
-							/* Discard invalid frames */
-							dev->stats.rx_errors++;
-							dev->stats.rx_over_errors++;
-							chan->rx_first_bd = 0;
-							chan->rx_last_bd = N_DMA_RX_BUF - 1;
-							rx_dma_start(card, ch);
-						}
-					}
-				}
-				if (status & IR0_DRX(IR0_DMIB, ch)) {
-					if (drx_stat & DSR_EOM) {
-						if (card->hw.type == PC300_TE) {
-							cpc_writeb(card->hw.falcbase +
-								   card->hw.cpld_reg2,
-								   cpc_readb (card->hw.falcbase +
-								    	card->hw.cpld_reg2) |
-								   (CPLD_REG2_FALC_LED1 << (2 * ch)));
-						}
-#ifdef CONFIG_PC300_MLPPP
-						if (chan->conf.proto == PC300_PROTO_MLPPP) {
-							/* verify if driver is TTY */
-							cpc_tty_receive(d);
-						} else {
-							cpc_net_rx(dev);
-						}
-#else
-						cpc_net_rx(dev);
-#endif
-						if (card->hw.type == PC300_TE) {
-							cpc_writeb(card->hw.falcbase +
-								   card->hw.cpld_reg2,
-								   cpc_readb (card->hw.falcbase +
-								    		card->hw.cpld_reg2) &
-								   ~ (CPLD_REG2_FALC_LED1 << (2 * ch)));
-						}
-					}
-				}
-				if (!(dsr_rx = cpc_readb(scabase + DSR_RX(ch)) & DSR_DE)) {
-#ifdef PC300_DEBUG_INTR
-		printk("%s: RX intr chan[%d] (st=0x%08lx, dsr=0x%02x, dsr2=0x%02x)\n",
-			dev->name, ch, status, drx_stat, dsr_rx);
-#endif
-					cpc_writeb(scabase + DSR_RX(ch), (dsr_rx | DSR_DE) & 0xfe);
-				}
-			}
-
-	    /**** Transmission ****/
-			if (status & IR0_DTX((IR0_EFT | IR0_DMIA | IR0_DMIB), ch)) {
-				u8 dtx_stat = cpc_readb(scabase + DSR_TX(ch));
-
-				/* Clear TX interrupts */
-				cpc_writeb(scabase + DSR_TX(ch), dtx_stat | DSR_DWE);
-
-#ifdef PC300_DEBUG_INTR
-				printk ("sca_intr: TX intr chan[%d] (st=0x%08lx, dsr=0x%02x)\n",
-					 ch, status, dtx_stat);
-#endif
-				if (status & IR0_DTX(IR0_EFT, ch)) {
-					if (dtx_stat & DSR_UDRF) {
-						if (cpc_readb (scabase + M_REG(TBN, ch)) != 0) {
-							cpc_writeb(scabase + M_REG(CMD,ch), CMD_TX_BUF_CLR);
-						}
-						if (card->hw.type == PC300_TE) {
-							cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2,
-								   cpc_readb (card->hw.falcbase + 
-										   card->hw.cpld_reg2) &
-								   ~ (CPLD_REG2_FALC_LED1 << (2 * ch)));
-						}
-						dev->stats.tx_errors++;
-						dev->stats.tx_fifo_errors++;
-						sca_tx_intr(d);
-					}
-				}
-				if (status & IR0_DTX(IR0_DMIA, ch)) {
-					if (dtx_stat & DSR_BOF) {
-					}
-				}
-				if (status & IR0_DTX(IR0_DMIB, ch)) {
-					if (dtx_stat & DSR_EOM) {
-						if (card->hw.type == PC300_TE) {
-							cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2,
-								   cpc_readb (card->hw.falcbase +
-								    			card->hw.cpld_reg2) &
-								   ~ (CPLD_REG2_FALC_LED1 << (2 * ch)));
-						}
-						sca_tx_intr(d);
-					}
-				}
-			}
-
-	    /**** MSCI ****/
-			if (status & IR0_M(IR0_RXINTA, ch)) {
-				u8 st1 = cpc_readb(scabase + M_REG(ST1, ch));
-
-				/* Clear MSCI interrupts */
-				cpc_writeb(scabase + M_REG(ST1, ch), st1);
-
-#ifdef PC300_DEBUG_INTR
-				printk("sca_intr: MSCI intr chan[%d] (st=0x%08lx, st1=0x%02x)\n",
-					 ch, status, st1);
-#endif
-				if (st1 & ST1_CDCD) {	/* DCD changed */
-					if (cpc_readb(scabase + M_REG(ST3, ch)) & ST3_DCD) {
-						printk ("%s: DCD is OFF. Going administrative down.\n",
-							 dev->name);
-#ifdef CONFIG_PC300_MLPPP
-						if (chan->conf.proto != PC300_PROTO_MLPPP) {
-							netif_carrier_off(dev);
-						}
-#else
-						netif_carrier_off(dev);
-
-#endif
-						card->chan[ch].d.line_off++;
-					} else {	/* DCD = 1 */
-						printk ("%s: DCD is ON. Going administrative up.\n",
-							 dev->name);
-#ifdef CONFIG_PC300_MLPPP
-						if (chan->conf.proto != PC300_PROTO_MLPPP)
-							/* verify if driver is not TTY */
-#endif
-							netif_carrier_on(dev);
-						card->chan[ch].d.line_on++;
-					}
-				}
-			}
-			spin_unlock(&card->card_lock);
-		}
-		if (++intr_count == 10)
-			/* Too much work at this board. Force exit */
-			break;
-	}
-}
-
-static void falc_t1_loop_detection(pc300_t *card, int ch, u8 frs1)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	falc_t *pfalc = (falc_t *) & chan->falc;
-	void __iomem *falcbase = card->hw.falcbase;
-
-	if (((cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_XPRBS) == 0) &&
-	    !pfalc->loop_gen) {
-		if (frs1 & FRS1_LLBDD) {
-			// A Line Loop Back Deactivation signal detected
-			if (pfalc->loop_active) {
-				falc_remote_loop(card, ch, 0);
-			}
-		} else {
-			if ((frs1 & FRS1_LLBAD) &&
-			    ((cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_EPRM) == 0)) {
-				// A Line Loop Back Activation signal detected  
-				if (!pfalc->loop_active) {
-					falc_remote_loop(card, ch, 1);
-				}
-			}
-		}
-	}
-}
-
-static void falc_e1_loop_detection(pc300_t *card, int ch, u8 rsp)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	falc_t *pfalc = (falc_t *) & chan->falc;
-	void __iomem *falcbase = card->hw.falcbase;
-
-	if (((cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_XPRBS) == 0) &&
-	    !pfalc->loop_gen) {
-		if (rsp & RSP_LLBDD) {
-			// A Line Loop Back Deactivation signal detected
-			if (pfalc->loop_active) {
-				falc_remote_loop(card, ch, 0);
-			}
-		} else {
-			if ((rsp & RSP_LLBAD) &&
-			    ((cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_EPRM) == 0)) {
-				// A Line Loop Back Activation signal detected  
-				if (!pfalc->loop_active) {
-					falc_remote_loop(card, ch, 1);
-				}
-			}
-		}
-	}
-}
-
-static void falc_t1_intr(pc300_t * card, int ch)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	falc_t *pfalc = (falc_t *) & chan->falc;
-	void __iomem *falcbase = card->hw.falcbase;
-	u8 isr0, isr3, gis;
-	u8 dummy;
-
-	while ((gis = cpc_readb(falcbase + F_REG(GIS, ch))) != 0) {
-		if (gis & GIS_ISR0) {
-			isr0 = cpc_readb(falcbase + F_REG(FISR0, ch));
-			if (isr0 & FISR0_PDEN) {
-				/* Read the bit to clear the situation */
-				if (cpc_readb(falcbase + F_REG(FRS1, ch)) &
-				    FRS1_PDEN) {
-					pfalc->pden++;
-				}
-			}
-		}
-
-		if (gis & GIS_ISR1) {
-			dummy = cpc_readb(falcbase + F_REG(FISR1, ch));
-		}
-
-		if (gis & GIS_ISR2) {
-			dummy = cpc_readb(falcbase + F_REG(FISR2, ch));
-		}
-
-		if (gis & GIS_ISR3) {
-			isr3 = cpc_readb(falcbase + F_REG(FISR3, ch));
-			if (isr3 & FISR3_SEC) {
-				pfalc->sec++;
-				falc_update_stats(card, ch);
-				falc_check_status(card, ch,
-						  cpc_readb(falcbase + F_REG(FRS0, ch)));
-			}
-			if (isr3 & FISR3_ES) {
-				pfalc->es++;
-			}
-			if (isr3 & FISR3_LLBSC) {
-				falc_t1_loop_detection(card, ch,
-						       cpc_readb(falcbase + F_REG(FRS1, ch)));
-			}
-		}
-	}
-}
-
-static void falc_e1_intr(pc300_t * card, int ch)
-{
-	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
-	falc_t *pfalc = (falc_t *) & chan->falc;
-	void __iomem *falcbase = card->hw.falcbase;
-	u8 isr1, isr2, isr3, gis, rsp;
-	u8 dummy;
-
-	while ((gis = cpc_readb(falcbase + F_REG(GIS, ch))) != 0) {
-		rsp = cpc_readb(falcbase + F_REG(RSP, ch));
-
-		if (gis & GIS_ISR0) {
-			dummy = cpc_readb(falcbase + F_REG(FISR0, ch));
-		}
-		if (gis & GIS_ISR1) {
-			isr1 = cpc_readb(falcbase + F_REG(FISR1, ch));
-			if (isr1 & FISR1_XMB) {
-				if ((pfalc->xmb_cause & 2) &&
-				    pfalc->multiframe_mode) {
-					if (cpc_readb (falcbase + F_REG(FRS0, ch)) & 
-									(FRS0_LOS | FRS0_AIS | FRS0_LFA)) {
-						cpc_writeb(falcbase + F_REG(XSP, ch),
-							   cpc_readb(falcbase + F_REG(XSP, ch))
-							   & ~XSP_AXS);
-					} else {
-						cpc_writeb(falcbase + F_REG(XSP, ch),
-							   cpc_readb(falcbase + F_REG(XSP, ch))
-							   | XSP_AXS);
-					}
-				}
-				pfalc->xmb_cause = 0;
-				cpc_writeb(falcbase + F_REG(IMR1, ch),
-					   cpc_readb(falcbase + F_REG(IMR1, ch)) | IMR1_XMB);
-			}
-			if (isr1 & FISR1_LLBSC) {
-				falc_e1_loop_detection(card, ch, rsp);
-			}
-		}
-		if (gis & GIS_ISR2) {
-			isr2 = cpc_readb(falcbase + F_REG(FISR2, ch));
-			if (isr2 & FISR2_T400MS) {
-				cpc_writeb(falcbase + F_REG(XSW, ch),
-					   cpc_readb(falcbase + F_REG(XSW, ch)) | XSW_XRA);
-			}
-			if (isr2 & FISR2_MFAR) {
-				cpc_writeb(falcbase + F_REG(XSW, ch),
-					   cpc_readb(falcbase + F_REG(XSW, ch)) & ~XSW_XRA);
-			}
-			if (isr2 & (FISR2_FAR | FISR2_LFA | FISR2_AIS | FISR2_LOS)) {
-				pfalc->xmb_cause |= 2;
-				cpc_writeb(falcbase + F_REG(IMR1, ch),
-					   cpc_readb(falcbase + F_REG(IMR1, ch)) & ~IMR1_XMB);
-			}
-		}
-		if (gis & GIS_ISR3) {
-			isr3 = cpc_readb(falcbase + F_REG(FISR3, ch));
-			if (isr3 & FISR3_SEC) {
-				pfalc->sec++;
-				falc_update_stats(card, ch);
-				falc_check_status(card, ch,
-						  cpc_readb(falcbase + F_REG(FRS0, ch)));
-			}
-			if (isr3 & FISR3_ES) {
-				pfalc->es++;
-			}
-		}
-	}
-}
-
-static void falc_intr(pc300_t * card)
-{
-	int ch;
-
-	for (ch = 0; ch < card->hw.nchan; ch++) {
-		pc300ch_t *chan = &card->chan[ch];
-		pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
-
-		if (conf->media == IF_IFACE_T1) {
-			falc_t1_intr(card, ch);
-		} else {
-			falc_e1_intr(card, ch);
-		}
-	}
-}
-
-static irqreturn_t cpc_intr(int irq, void *dev_id)
-{
-	pc300_t *card = dev_id;
-	volatile u8 plx_status;
-
-	if (!card) {
-#ifdef PC300_DEBUG_INTR
-		printk("cpc_intr: spurious intr %d\n", irq);
-#endif
-		return IRQ_NONE;		/* spurious intr */
-	}
-
-	if (!card->hw.rambase) {
-#ifdef PC300_DEBUG_INTR
-		printk("cpc_intr: spurious intr2 %d\n", irq);
-#endif
-		return IRQ_NONE;		/* spurious intr */
-	}
-
-	switch (card->hw.type) {
-		case PC300_RSV:
-		case PC300_X21:
-			sca_intr(card);
-			break;
-
-		case PC300_TE:
-			while ( (plx_status = (cpc_readb(card->hw.plxbase + card->hw.intctl_reg) &
-				 (PLX_9050_LINT1_STATUS | PLX_9050_LINT2_STATUS))) != 0) {
-				if (plx_status & PLX_9050_LINT1_STATUS) {	/* SCA Interrupt */
-					sca_intr(card);
-				}
-				if (plx_status & PLX_9050_LINT2_STATUS) {	/* FALC Interrupt */
-					falc_intr(card);
-				}
-			}
-			break;
-	}
-	return IRQ_HANDLED;
-}
-
-static void cpc_sca_status(pc300_t * card, int ch)
-{
-	u8 ilar;
-	void __iomem *scabase = card->hw.scabase;
-	unsigned long flags;
-
-	tx_dma_buf_check(card, ch);
-	rx_dma_buf_check(card, ch);
-	ilar = cpc_readb(scabase + ILAR);
-	printk ("ILAR=0x%02x, WCRL=0x%02x, PCR=0x%02x, BTCR=0x%02x, BOLR=0x%02x\n",
-		 ilar, cpc_readb(scabase + WCRL), cpc_readb(scabase + PCR),
-		 cpc_readb(scabase + BTCR), cpc_readb(scabase + BOLR));
-	printk("TX_CDA=0x%08x, TX_EDA=0x%08x\n",
-	       cpc_readl(scabase + DTX_REG(CDAL, ch)),
-	       cpc_readl(scabase + DTX_REG(EDAL, ch)));
-	printk("RX_CDA=0x%08x, RX_EDA=0x%08x, BFL=0x%04x\n",
-	       cpc_readl(scabase + DRX_REG(CDAL, ch)),
-	       cpc_readl(scabase + DRX_REG(EDAL, ch)),
-	       cpc_readw(scabase + DRX_REG(BFLL, ch)));
-	printk("DMER=0x%02x, DSR_TX=0x%02x, DSR_RX=0x%02x\n",
-	       cpc_readb(scabase + DMER), cpc_readb(scabase + DSR_TX(ch)),
-	       cpc_readb(scabase + DSR_RX(ch)));
-	printk("DMR_TX=0x%02x, DMR_RX=0x%02x, DIR_TX=0x%02x, DIR_RX=0x%02x\n",
-	       cpc_readb(scabase + DMR_TX(ch)), cpc_readb(scabase + DMR_RX(ch)),
-	       cpc_readb(scabase + DIR_TX(ch)),
-	       cpc_readb(scabase + DIR_RX(ch)));
-	printk("DCR_TX=0x%02x, DCR_RX=0x%02x, FCT_TX=0x%02x, FCT_RX=0x%02x\n",
-	       cpc_readb(scabase + DCR_TX(ch)), cpc_readb(scabase + DCR_RX(ch)),
-	       cpc_readb(scabase + FCT_TX(ch)),
-	       cpc_readb(scabase + FCT_RX(ch)));
-	printk("MD0=0x%02x, MD1=0x%02x, MD2=0x%02x, MD3=0x%02x, IDL=0x%02x\n",
-	       cpc_readb(scabase + M_REG(MD0, ch)),
-	       cpc_readb(scabase + M_REG(MD1, ch)),
-	       cpc_readb(scabase + M_REG(MD2, ch)),
-	       cpc_readb(scabase + M_REG(MD3, ch)),
-	       cpc_readb(scabase + M_REG(IDL, ch)));
-	printk("CMD=0x%02x, SA0=0x%02x, SA1=0x%02x, TFN=0x%02x, CTL=0x%02x\n",
-	       cpc_readb(scabase + M_REG(CMD, ch)),
-	       cpc_readb(scabase + M_REG(SA0, ch)),
-	       cpc_readb(scabase + M_REG(SA1, ch)),
-	       cpc_readb(scabase + M_REG(TFN, ch)),
-	       cpc_readb(scabase + M_REG(CTL, ch)));
-	printk("ST0=0x%02x, ST1=0x%02x, ST2=0x%02x, ST3=0x%02x, ST4=0x%02x\n",
-	       cpc_readb(scabase + M_REG(ST0, ch)),
-	       cpc_readb(scabase + M_REG(ST1, ch)),
-	       cpc_readb(scabase + M_REG(ST2, ch)),
-	       cpc_readb(scabase + M_REG(ST3, ch)),
-	       cpc_readb(scabase + M_REG(ST4, ch)));
-	printk ("CST0=0x%02x, CST1=0x%02x, CST2=0x%02x, CST3=0x%02x, FST=0x%02x\n",
-		 cpc_readb(scabase + M_REG(CST0, ch)),
-		 cpc_readb(scabase + M_REG(CST1, ch)),
-		 cpc_readb(scabase + M_REG(CST2, ch)),
-		 cpc_readb(scabase + M_REG(CST3, ch)),
-		 cpc_readb(scabase + M_REG(FST, ch)));
-	printk("TRC0=0x%02x, TRC1=0x%02x, RRC=0x%02x, TBN=0x%02x, RBN=0x%02x\n",
-	       cpc_readb(scabase + M_REG(TRC0, ch)),
-	       cpc_readb(scabase + M_REG(TRC1, ch)),
-	       cpc_readb(scabase + M_REG(RRC, ch)),
-	       cpc_readb(scabase + M_REG(TBN, ch)),
-	       cpc_readb(scabase + M_REG(RBN, ch)));
-	printk("TFS=0x%02x, TNR0=0x%02x, TNR1=0x%02x, RNR=0x%02x\n",
-	       cpc_readb(scabase + M_REG(TFS, ch)),
-	       cpc_readb(scabase + M_REG(TNR0, ch)),
-	       cpc_readb(scabase + M_REG(TNR1, ch)),
-	       cpc_readb(scabase + M_REG(RNR, ch)));
-	printk("TCR=0x%02x, RCR=0x%02x, TNR1=0x%02x, RNR=0x%02x\n",
-	       cpc_readb(scabase + M_REG(TCR, ch)),
-	       cpc_readb(scabase + M_REG(RCR, ch)),
-	       cpc_readb(scabase + M_REG(TNR1, ch)),
-	       cpc_readb(scabase + M_REG(RNR, ch)));
-	printk("TXS=0x%02x, RXS=0x%02x, EXS=0x%02x, TMCT=0x%02x, TMCR=0x%02x\n",
-	       cpc_readb(scabase + M_REG(TXS, ch)),
-	       cpc_readb(scabase + M_REG(RXS, ch)),
-	       cpc_readb(scabase + M_REG(EXS, ch)),
-	       cpc_readb(scabase + M_REG(TMCT, ch)),
-	       cpc_readb(scabase + M_REG(TMCR, ch)));
-	printk("IE0=0x%02x, IE1=0x%02x, IE2=0x%02x, IE4=0x%02x, FIE=0x%02x\n",
-	       cpc_readb(scabase + M_REG(IE0, ch)),
-	       cpc_readb(scabase + M_REG(IE1, ch)),
-	       cpc_readb(scabase + M_REG(IE2, ch)),
-	       cpc_readb(scabase + M_REG(IE4, ch)),
-	       cpc_readb(scabase + M_REG(FIE, ch)));
-	printk("IER0=0x%08x\n", cpc_readl(scabase + IER0));
-
-	if (ilar != 0) {
-		CPC_LOCK(card, flags);
-		cpc_writeb(scabase + ILAR, ilar);
-		cpc_writeb(scabase + DMER, 0x80);
-		CPC_UNLOCK(card, flags);
-	}
-}
-
-static void cpc_falc_status(pc300_t * card, int ch)
-{
-	pc300ch_t *chan = &card->chan[ch];
-	falc_t *pfalc = (falc_t *) & chan->falc;
-	unsigned long flags;
-
-	CPC_LOCK(card, flags);
-	printk("CH%d:   %s %s  %d channels\n",
-	       ch, (pfalc->sync ? "SYNC" : ""), (pfalc->active ? "ACTIVE" : ""),
-	       pfalc->num_channels);
-
-	printk("        pden=%d,  los=%d,  losr=%d,  lfa=%d,  farec=%d\n",
-	       pfalc->pden, pfalc->los, pfalc->losr, pfalc->lfa, pfalc->farec);
-	printk("        lmfa=%d,  ais=%d,  sec=%d,  es=%d,  rai=%d\n",
-	       pfalc->lmfa, pfalc->ais, pfalc->sec, pfalc->es, pfalc->rai);
-	printk("        bec=%d,  fec=%d,  cvc=%d,  cec=%d,  ebc=%d\n",
-	       pfalc->bec, pfalc->fec, pfalc->cvc, pfalc->cec, pfalc->ebc);
-
-	printk("\n");
-	printk("        STATUS: %s  %s  %s  %s  %s  %s\n",
-	       (pfalc->red_alarm ? "RED" : ""),
-	       (pfalc->blue_alarm ? "BLU" : ""),
-	       (pfalc->yellow_alarm ? "YEL" : ""),
-	       (pfalc->loss_fa ? "LFA" : ""),
-	       (pfalc->loss_mfa ? "LMF" : ""), (pfalc->prbs ? "PRB" : ""));
-	CPC_UNLOCK(card, flags);
-}
-
-static int cpc_change_mtu(struct net_device *dev, int new_mtu)
-{
-	if ((new_mtu < 128) || (new_mtu > PC300_DEF_MTU))
-		return -EINVAL;
-	dev->mtu = new_mtu;
-	return 0;
-}
-
-static int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
-	pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv;
-	pc300ch_t *chan = (pc300ch_t *) d->chan;
-	pc300_t *card = (pc300_t *) chan->card;
-	pc300conf_t conf_aux;
-	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
-	int ch = chan->channel;
-	void __user *arg = ifr->ifr_data;
-	struct if_settings *settings = &ifr->ifr_settings;
-	void __iomem *scabase = card->hw.scabase;
-
-	if (!capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	switch (cmd) {
-		case SIOCGPC300CONF:
-#ifdef CONFIG_PC300_MLPPP
-			if (conf->proto != PC300_PROTO_MLPPP) {
-				conf->proto = /* FIXME hdlc->proto.id */ 0;
-			}
-#else
-			conf->proto = /* FIXME hdlc->proto.id */ 0;
-#endif
-			memcpy(&conf_aux.conf, conf, sizeof(pc300chconf_t));
-			memcpy(&conf_aux.hw, &card->hw, sizeof(pc300hw_t));
-			if (!arg || 
-				copy_to_user(arg, &conf_aux, sizeof(pc300conf_t))) 
-				return -EINVAL;
-			return 0;
-		case SIOCSPC300CONF:
-			if (!capable(CAP_NET_ADMIN))
-				return -EPERM;
-			if (!arg || 
-				copy_from_user(&conf_aux.conf, arg, sizeof(pc300chconf_t)))
-				return -EINVAL;
-			if (card->hw.cpld_id < 0x02 &&
-			    conf_aux.conf.fr_mode == PC300_FR_UNFRAMED) {
-				/* CPLD_ID < 0x02 doesn't support Unframed E1 */
-				return -EINVAL;
-			}
-#ifdef CONFIG_PC300_MLPPP
-			if (conf_aux.conf.proto == PC300_PROTO_MLPPP) {
-				if (conf->proto != PC300_PROTO_MLPPP) {
-					memcpy(conf, &conf_aux.conf, sizeof(pc300chconf_t));
-					cpc_tty_init(d);	/* init TTY driver */
-				}
-			} else {
-				if (conf_aux.conf.proto == 0xffff) {
-					if (conf->proto == PC300_PROTO_MLPPP){ 
-						/* ifdown interface */
-						cpc_close(dev);
-					}
-				} else {
-					memcpy(conf, &conf_aux.conf, sizeof(pc300chconf_t));
-					/* FIXME hdlc->proto.id = conf->proto; */
-				}
-			}
-#else
-			memcpy(conf, &conf_aux.conf, sizeof(pc300chconf_t));
-			/* FIXME hdlc->proto.id = conf->proto; */
-#endif
-			return 0;
-		case SIOCGPC300STATUS:
-			cpc_sca_status(card, ch);
-			return 0;
-		case SIOCGPC300FALCSTATUS:
-			cpc_falc_status(card, ch);
-			return 0;
-
-		case SIOCGPC300UTILSTATS:
-			{
-				if (!arg) {	/* clear statistics */
-					memset(&dev->stats, 0, sizeof(dev->stats));
-					if (card->hw.type == PC300_TE) {
-						memset(&chan->falc, 0, sizeof(falc_t));
-					}
-				} else {
-					pc300stats_t pc300stats;
-
-					memset(&pc300stats, 0, sizeof(pc300stats_t));
-					pc300stats.hw_type = card->hw.type;
-					pc300stats.line_on = card->chan[ch].d.line_on;
-					pc300stats.line_off = card->chan[ch].d.line_off;
-					memcpy(&pc300stats.gen_stats, &dev->stats,
-					       sizeof(dev->stats));
-					if (card->hw.type == PC300_TE)
-						memcpy(&pc300stats.te_stats,&chan->falc,sizeof(falc_t));
-				    	if (copy_to_user(arg, &pc300stats, sizeof(pc300stats_t)))
-						return -EFAULT;
-				}
-				return 0;
-			}
-
-		case SIOCGPC300UTILSTATUS:
-			{
-				struct pc300status pc300status;
-
-				pc300status.hw_type = card->hw.type;
-				if (card->hw.type == PC300_TE) {
-					pc300status.te_status.sync = chan->falc.sync;
-					pc300status.te_status.red_alarm = chan->falc.red_alarm;
-					pc300status.te_status.blue_alarm = chan->falc.blue_alarm;
-					pc300status.te_status.loss_fa = chan->falc.loss_fa;
-					pc300status.te_status.yellow_alarm =chan->falc.yellow_alarm;
-					pc300status.te_status.loss_mfa = chan->falc.loss_mfa;
-					pc300status.te_status.prbs = chan->falc.prbs;
-				} else {
-					pc300status.gen_status.dcd =
-						!(cpc_readb (scabase + M_REG(ST3, ch)) & ST3_DCD);
-					pc300status.gen_status.cts =
-						!(cpc_readb (scabase + M_REG(ST3, ch)) & ST3_CTS);
-					pc300status.gen_status.rts =
-						!(cpc_readb (scabase + M_REG(CTL, ch)) & CTL_RTS);
-					pc300status.gen_status.dtr =
-						!(cpc_readb (scabase + M_REG(CTL, ch)) & CTL_DTR);
-					/* There is no DSR in HD64572 */
-				}
-				if (!arg ||
-				    copy_to_user(arg, &pc300status, sizeof(pc300status_t)))
-					return -EINVAL;
-				return 0;
-			}
-
-		case SIOCSPC300TRACE:
-			/* Sets/resets a trace_flag for the respective device */
-			if (!arg || copy_from_user(&d->trace_on, arg,sizeof(unsigned char)))
-					return -EINVAL;
-			return 0;
-
-		case SIOCSPC300LOOPBACK:
-			{
-				struct pc300loopback pc300loop;
-
-				/* TE boards only */
-				if (card->hw.type != PC300_TE)
-					return -EINVAL;
-
-				if (!arg || 
-					copy_from_user(&pc300loop, arg, sizeof(pc300loopback_t)))
-						return -EINVAL;
-				switch (pc300loop.loop_type) {
-					case PC300LOCLOOP:	/* Turn the local loop on/off */
-						falc_local_loop(card, ch, pc300loop.loop_on);
-						return 0;
-
-					case PC300REMLOOP:	/* Turn the remote loop on/off */
-						falc_remote_loop(card, ch, pc300loop.loop_on);
-						return 0;
-
-					case PC300PAYLOADLOOP:	/* Turn the payload loop on/off */
-						falc_payload_loop(card, ch, pc300loop.loop_on);
-						return 0;
-
-					case PC300GENLOOPUP:	/* Generate loop UP */
-						if (pc300loop.loop_on) {
-							falc_generate_loop_up_code (card, ch);
-						} else {
-							turn_off_xlu(card, ch);
-						}
-						return 0;
-
-					case PC300GENLOOPDOWN:	/* Generate loop DOWN */
-						if (pc300loop.loop_on) {
-							falc_generate_loop_down_code (card, ch);
-						} else {
-							turn_off_xld(card, ch);
-						}
-						return 0;
-
-					default:
-						return -EINVAL;
-				}
-			}
-
-		case SIOCSPC300PATTERNTEST:
-			/* Turn the pattern test on/off and show the errors counter */
-			{
-				struct pc300patterntst pc300patrntst;
-
-				/* TE boards only */
-				if (card->hw.type != PC300_TE)
-					return -EINVAL;
-
-				if (card->hw.cpld_id < 0x02) {
-					/* CPLD_ID < 0x02 doesn't support pattern test */
-					return -EINVAL;
-				}
-
-				if (!arg || 
-					copy_from_user(&pc300patrntst,arg,sizeof(pc300patterntst_t)))
-						return -EINVAL;
-				if (pc300patrntst.patrntst_on == 2) {
-					if (chan->falc.prbs == 0) {
-						falc_pattern_test(card, ch, 1);
-					}
-					pc300patrntst.num_errors =
-						falc_pattern_test_error(card, ch);
-					if (copy_to_user(arg, &pc300patrntst,
-							 sizeof(pc300patterntst_t)))
-							return -EINVAL;
-				} else {
-					falc_pattern_test(card, ch, pc300patrntst.patrntst_on);
-				}
-				return 0;
-			}
-
-		case SIOCWANDEV:
-			switch (ifr->ifr_settings.type) {
-				case IF_GET_IFACE:
-				{
-					const size_t size = sizeof(sync_serial_settings);
-					ifr->ifr_settings.type = conf->media;
-					if (ifr->ifr_settings.size < size) {
-						/* data size wanted */
-						ifr->ifr_settings.size = size;
-						return -ENOBUFS;
-					}
-	
-					if (copy_to_user(settings->ifs_ifsu.sync,
-							 &conf->phys_settings, size)) {
-						return -EFAULT;
-					}
-					return 0;
-				}
-
-				case IF_IFACE_V35:
-				case IF_IFACE_V24:
-				case IF_IFACE_X21:
-				{
-					const size_t size = sizeof(sync_serial_settings);
-
-					if (!capable(CAP_NET_ADMIN)) {
-						return -EPERM;
-					}
-					/* incorrect data len? */
-					if (ifr->ifr_settings.size != size) {
-						return -ENOBUFS;
-					}
-
-					if (copy_from_user(&conf->phys_settings, 
-							   settings->ifs_ifsu.sync, size)) {
-						return -EFAULT;
-					}
-
-					if (conf->phys_settings.loopback) {
-						cpc_writeb(card->hw.scabase + M_REG(MD2, ch),
-							cpc_readb(card->hw.scabase + M_REG(MD2, ch)) | 
-							MD2_LOOP_MIR);
-					}
-					conf->media = ifr->ifr_settings.type;
-					return 0;
-				}
-
-				case IF_IFACE_T1:
-				case IF_IFACE_E1:
-				{
-					const size_t te_size = sizeof(te1_settings);
-					const size_t size = sizeof(sync_serial_settings);
-
-					if (!capable(CAP_NET_ADMIN)) {
-						return -EPERM;
-					}
-
-					/* incorrect data len? */
-					if (ifr->ifr_settings.size != te_size) {
-						return -ENOBUFS;
-					}
-
-					if (copy_from_user(&conf->phys_settings, 
-							   settings->ifs_ifsu.te1, size)) {
-						return -EFAULT;
-					}/* Ignoring HDLC slot_map for a while */
-					
-					if (conf->phys_settings.loopback) {
-						cpc_writeb(card->hw.scabase + M_REG(MD2, ch),
-							cpc_readb(card->hw.scabase + M_REG(MD2, ch)) | 
-							MD2_LOOP_MIR);
-					}
-					conf->media = ifr->ifr_settings.type;
-					return 0;
-				}
-				default:
-					return hdlc_ioctl(dev, ifr, cmd);
-			}
-
-		default:
-			return hdlc_ioctl(dev, ifr, cmd);
-	}
-}
-
-static int clock_rate_calc(u32 rate, u32 clock, int *br_io)
-{
-	int br, tc;
-	int br_pwr, error;
-
-	*br_io = 0;
-
-	if (rate == 0)
-		return 0;
-
-	for (br = 0, br_pwr = 1; br <= 9; br++, br_pwr <<= 1) {
-		if ((tc = clock / br_pwr / rate) <= 0xff) {
-			*br_io = br;
-			break;
-		}
-	}
-
-	if (tc <= 0xff) {
-		error = ((rate - (clock / br_pwr / rate)) / rate) * 1000;
-		/* Errors bigger than +/- 1% won't be tolerated */
-		if (error < -10 || error > 10)
-			return -1;
-		else
-			return tc;
-	} else {
-		return -1;
-	}
-}
-
-static int ch_config(pc300dev_t * d)
-{
-	pc300ch_t *chan = (pc300ch_t *) d->chan;
-	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
-	pc300_t *card = (pc300_t *) chan->card;
-	void __iomem *scabase = card->hw.scabase;
-	void __iomem *plxbase = card->hw.plxbase;
-	int ch = chan->channel;
-	u32 clkrate = chan->conf.phys_settings.clock_rate;
-	u32 clktype = chan->conf.phys_settings.clock_type;
-	u16 encoding = chan->conf.proto_settings.encoding;
-	u16 parity = chan->conf.proto_settings.parity;
-	u8 md0, md2;
-
-	/* Reset the channel */
-	cpc_writeb(scabase + M_REG(CMD, ch), CMD_CH_RST);
-
-	/* Configure the SCA registers */
-	switch (parity) {
-		case PARITY_NONE:
-			md0 = MD0_BIT_SYNC;
-			break;
-		case PARITY_CRC16_PR0:
-			md0 = MD0_CRC16_0|MD0_CRCC0|MD0_BIT_SYNC;
-			break;
-		case PARITY_CRC16_PR1:
-			md0 = MD0_CRC16_1|MD0_CRCC0|MD0_BIT_SYNC;
-			break;
-		case PARITY_CRC32_PR1_CCITT:
-			md0 = MD0_CRC32|MD0_CRCC0|MD0_BIT_SYNC;
-			break;
-		case PARITY_CRC16_PR1_CCITT:
-		default:
-			md0 = MD0_CRC_CCITT|MD0_CRCC0|MD0_BIT_SYNC;
-			break;
-	}
-	switch (encoding) {
-		case ENCODING_NRZI:
-			md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_NRZI;
-			break;
-		case ENCODING_FM_MARK:	/* FM1 */
-			md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_FM|MD2_FM1;
-			break;
-		case ENCODING_FM_SPACE:	/* FM0 */
-			md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_FM|MD2_FM0;
-			break;
-		case ENCODING_MANCHESTER: /* It's not working... */
-			md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_FM|MD2_MANCH;
-			break;
-		case ENCODING_NRZ:
-		default:
-			md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_NRZ;
-			break;
-	}
-	cpc_writeb(scabase + M_REG(MD0, ch), md0);
-	cpc_writeb(scabase + M_REG(MD1, ch), 0);
-	cpc_writeb(scabase + M_REG(MD2, ch), md2);
- 	cpc_writeb(scabase + M_REG(IDL, ch), 0x7e);
-	cpc_writeb(scabase + M_REG(CTL, ch), CTL_URSKP | CTL_IDLC);
-
-	/* Configure HW media */
-	switch (card->hw.type) {
-		case PC300_RSV:
-			if (conf->media == IF_IFACE_V35) {
-				cpc_writel((plxbase + card->hw.gpioc_reg),
-					   cpc_readl(plxbase + card->hw.gpioc_reg) | PC300_CHMEDIA_MASK(ch));
-			} else {
-				cpc_writel((plxbase + card->hw.gpioc_reg),
-					   cpc_readl(plxbase + card->hw.gpioc_reg) & ~PC300_CHMEDIA_MASK(ch));
-			}
-			break;
-
-		case PC300_X21:
-			break;
-
-		case PC300_TE:
-			te_config(card, ch);
-			break;
-	}
-
-	switch (card->hw.type) {
-		case PC300_RSV:
-		case PC300_X21:
-			if (clktype == CLOCK_INT || clktype == CLOCK_TXINT) {
-				int tmc, br;
-
-				/* Calculate the clkrate parameters */
-				tmc = clock_rate_calc(clkrate, card->hw.clock, &br);
-				if (tmc < 0)
-					return -EIO;
-				cpc_writeb(scabase + M_REG(TMCT, ch), tmc);
-				cpc_writeb(scabase + M_REG(TXS, ch),
-					   (TXS_DTRXC | TXS_IBRG | br));
-				if (clktype == CLOCK_INT) {
-					cpc_writeb(scabase + M_REG(TMCR, ch), tmc);
-					cpc_writeb(scabase + M_REG(RXS, ch), 
-						   (RXS_IBRG | br));
-				} else {
-					cpc_writeb(scabase + M_REG(TMCR, ch), 1);
-					cpc_writeb(scabase + M_REG(RXS, ch), 0);
-				}
-	    			if (card->hw.type == PC300_X21) {
-					cpc_writeb(scabase + M_REG(GPO, ch), 1);
-					cpc_writeb(scabase + M_REG(EXS, ch), EXS_TES1 | EXS_RES1);
-				} else {
-					cpc_writeb(scabase + M_REG(EXS, ch), EXS_TES1);
-				}
-			} else {
-				cpc_writeb(scabase + M_REG(TMCT, ch), 1);
-				if (clktype == CLOCK_EXT) {
-					cpc_writeb(scabase + M_REG(TXS, ch), 
-						   TXS_DTRXC);
-				} else {
-					cpc_writeb(scabase + M_REG(TXS, ch), 
-						   TXS_DTRXC|TXS_RCLK);
-				}
-	    			cpc_writeb(scabase + M_REG(TMCR, ch), 1);
-				cpc_writeb(scabase + M_REG(RXS, ch), 0);
-				if (card->hw.type == PC300_X21) {
-					cpc_writeb(scabase + M_REG(GPO, ch), 0);
-					cpc_writeb(scabase + M_REG(EXS, ch), EXS_TES1 | EXS_RES1);
-				} else {
-					cpc_writeb(scabase + M_REG(EXS, ch), EXS_TES1);
-				}
-			}
-			break;
-
-		case PC300_TE:
-			/* SCA always receives clock from the FALC chip */
-			cpc_writeb(scabase + M_REG(TMCT, ch), 1);
-			cpc_writeb(scabase + M_REG(TXS, ch), 0);
-			cpc_writeb(scabase + M_REG(TMCR, ch), 1);
-			cpc_writeb(scabase + M_REG(RXS, ch), 0);
-			cpc_writeb(scabase + M_REG(EXS, ch), 0);
-			break;
-	}
-
-	/* Enable Interrupts */
-	cpc_writel(scabase + IER0,
-		   cpc_readl(scabase + IER0) |
-		   IR0_M(IR0_RXINTA, ch) |
-		   IR0_DRX(IR0_EFT | IR0_DMIA | IR0_DMIB, ch) |
-		   IR0_DTX(IR0_EFT | IR0_DMIA | IR0_DMIB, ch));
-	cpc_writeb(scabase + M_REG(IE0, ch),
-		   cpc_readl(scabase + M_REG(IE0, ch)) | IE0_RXINTA);
-	cpc_writeb(scabase + M_REG(IE1, ch),
-		   cpc_readl(scabase + M_REG(IE1, ch)) | IE1_CDCD);
-
-	return 0;
-}
-
-static int rx_config(pc300dev_t * d)
-{
-	pc300ch_t *chan = (pc300ch_t *) d->chan;
-	pc300_t *card = (pc300_t *) chan->card;
-	void __iomem *scabase = card->hw.scabase;
-	int ch = chan->channel;
-
-	cpc_writeb(scabase + DSR_RX(ch), 0);
-
-	/* General RX settings */
-	cpc_writeb(scabase + M_REG(RRC, ch), 0);
-	cpc_writeb(scabase + M_REG(RNR, ch), 16);
-
-	/* Enable reception */
-	cpc_writeb(scabase + M_REG(CMD, ch), CMD_RX_CRC_INIT);
-	cpc_writeb(scabase + M_REG(CMD, ch), CMD_RX_ENA);
-
-	/* Initialize DMA stuff */
-	chan->rx_first_bd = 0;
-	chan->rx_last_bd = N_DMA_RX_BUF - 1;
-	rx_dma_buf_init(card, ch);
-	cpc_writeb(scabase + DCR_RX(ch), DCR_FCT_CLR);
-	cpc_writeb(scabase + DMR_RX(ch), (DMR_TMOD | DMR_NF));
-	cpc_writeb(scabase + DIR_RX(ch), (DIR_EOM | DIR_BOF));
-
-	/* Start DMA */
-	rx_dma_start(card, ch);
-
-	return 0;
-}
-
-static int tx_config(pc300dev_t * d)
-{
-	pc300ch_t *chan = (pc300ch_t *) d->chan;
-	pc300_t *card = (pc300_t *) chan->card;
-	void __iomem *scabase = card->hw.scabase;
-	int ch = chan->channel;
-
-	cpc_writeb(scabase + DSR_TX(ch), 0);
-
-	/* General TX settings */
-	cpc_writeb(scabase + M_REG(TRC0, ch), 0);
-	cpc_writeb(scabase + M_REG(TFS, ch), 32);
-	cpc_writeb(scabase + M_REG(TNR0, ch), 20);
-	cpc_writeb(scabase + M_REG(TNR1, ch), 48);
-	cpc_writeb(scabase + M_REG(TCR, ch), 8);
-
-	/* Enable transmission */
-	cpc_writeb(scabase + M_REG(CMD, ch), CMD_TX_CRC_INIT);
-
-	/* Initialize DMA stuff */
-	chan->tx_first_bd = 0;
-	chan->tx_next_bd = 0;
-	tx_dma_buf_init(card, ch);
-	cpc_writeb(scabase + DCR_TX(ch), DCR_FCT_CLR);
-	cpc_writeb(scabase + DMR_TX(ch), (DMR_TMOD | DMR_NF));
-	cpc_writeb(scabase + DIR_TX(ch), (DIR_EOM | DIR_BOF | DIR_UDRF));
-	cpc_writel(scabase + DTX_REG(CDAL, ch), TX_BD_ADDR(ch, chan->tx_first_bd));
-	cpc_writel(scabase + DTX_REG(EDAL, ch), TX_BD_ADDR(ch, chan->tx_next_bd));
-
-	return 0;
-}
-
-static int cpc_attach(struct net_device *dev, unsigned short encoding,
-		      unsigned short parity)
-{
-	pc300dev_t *d = (pc300dev_t *)dev_to_hdlc(dev)->priv;
-	pc300ch_t *chan = (pc300ch_t *)d->chan;
-	pc300_t *card = (pc300_t *)chan->card;
-	pc300chconf_t *conf = (pc300chconf_t *)&chan->conf;
-
-	if (card->hw.type == PC300_TE) {
-		if (encoding != ENCODING_NRZ && encoding != ENCODING_NRZI) {
-			return -EINVAL;
-		}
-	} else {
-		if (encoding != ENCODING_NRZ && encoding != ENCODING_NRZI &&
-		    encoding != ENCODING_FM_MARK && encoding != ENCODING_FM_SPACE) {
-			/* Driver doesn't support ENCODING_MANCHESTER yet */
-			return -EINVAL;
-		}
-	}
-
-	if (parity != PARITY_NONE && parity != PARITY_CRC16_PR0 &&
-	    parity != PARITY_CRC16_PR1 && parity != PARITY_CRC32_PR1_CCITT &&
-	    parity != PARITY_CRC16_PR1_CCITT) {
-		return -EINVAL;
-	}
-
-	conf->proto_settings.encoding = encoding;
-	conf->proto_settings.parity = parity;
-	return 0;
-}
-
-static int cpc_opench(pc300dev_t * d)
-{
-	pc300ch_t *chan = (pc300ch_t *) d->chan;
-	pc300_t *card = (pc300_t *) chan->card;
-	int ch = chan->channel, rc;
-	void __iomem *scabase = card->hw.scabase;
-
-	rc = ch_config(d);
-	if (rc)
-		return rc;
-
-	rx_config(d);
-
-	tx_config(d);
-
-	/* Assert RTS and DTR */
-	cpc_writeb(scabase + M_REG(CTL, ch),
-		   cpc_readb(scabase + M_REG(CTL, ch)) & ~(CTL_RTS | CTL_DTR));
-
-	return 0;
-}
-
-static void cpc_closech(pc300dev_t * d)
-{
-	pc300ch_t *chan = (pc300ch_t *) d->chan;
-	pc300_t *card = (pc300_t *) chan->card;
-	falc_t *pfalc = (falc_t *) & chan->falc;
-	int ch = chan->channel;
-
-	cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_CH_RST);
-	rx_dma_stop(card, ch);
-	tx_dma_stop(card, ch);
-
-	if (card->hw.type == PC300_TE) {
-		memset(pfalc, 0, sizeof(falc_t));
-		cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2,
-			   cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) &
-			   ~((CPLD_REG2_FALC_TX_CLK | CPLD_REG2_FALC_RX_CLK |
-			      CPLD_REG2_FALC_LED2) << (2 * ch)));
-		/* Reset the FALC chip */
-		cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1,
-			   cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) |
-			   (CPLD_REG1_FALC_RESET << (2 * ch)));
-		udelay(10000);
-		cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1,
-			   cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) &
-			   ~(CPLD_REG1_FALC_RESET << (2 * ch)));
-	}
-}
-
-int cpc_open(struct net_device *dev)
-{
-	pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv;
-	struct ifreq ifr;
-	int result;
-
-#ifdef	PC300_DEBUG_OTHER
-	printk("pc300: cpc_open");
-#endif
-
-	result = hdlc_open(dev);
-
-	if (result)
-		return result;
-
-	sprintf(ifr.ifr_name, "%s", dev->name);
-	result = cpc_opench(d);
-	if (result)
-		goto err_out;
-
-	netif_start_queue(dev);
-	return 0;
-
-err_out:
-	hdlc_close(dev);
-	return result;
-}
-
-static int cpc_close(struct net_device *dev)
-{
-	pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv;
-	pc300ch_t *chan = (pc300ch_t *) d->chan;
-	pc300_t *card = (pc300_t *) chan->card;
-	unsigned long flags;
-
-#ifdef	PC300_DEBUG_OTHER
-	printk("pc300: cpc_close");
-#endif
-
-	netif_stop_queue(dev);
-
-	CPC_LOCK(card, flags);
-	cpc_closech(d);
-	CPC_UNLOCK(card, flags);
-
-	hdlc_close(dev);
-
-#ifdef CONFIG_PC300_MLPPP
-	if (chan->conf.proto == PC300_PROTO_MLPPP) {
-		cpc_tty_unregister_service(d);
-		chan->conf.proto = 0xffff;
-	}
-#endif
-
-	return 0;
-}
-
-static u32 detect_ram(pc300_t * card)
-{
-	u32 i;
-	u8 data;
-	void __iomem *rambase = card->hw.rambase;
-
-	card->hw.ramsize = PC300_RAMSIZE;
-	/* Let's find out how much RAM is present on this board */
-	for (i = 0; i < card->hw.ramsize; i++) {
-		data = (u8)(i & 0xff);
-		cpc_writeb(rambase + i, data);
-		if (cpc_readb(rambase + i) != data) {
-			break;
-		}
-	}
-	return i;
-}
-
-static void plx_init(pc300_t * card)
-{
-	struct RUNTIME_9050 __iomem *plx_ctl = card->hw.plxbase;
-
-	/* Reset PLX */
-	cpc_writel(&plx_ctl->init_ctrl,
-		   cpc_readl(&plx_ctl->init_ctrl) | 0x40000000);
-	udelay(10000L);
-	cpc_writel(&plx_ctl->init_ctrl,
-		   cpc_readl(&plx_ctl->init_ctrl) & ~0x40000000);
-
-	/* Reload Config. Registers from EEPROM */
-	cpc_writel(&plx_ctl->init_ctrl,
-		   cpc_readl(&plx_ctl->init_ctrl) | 0x20000000);
-	udelay(10000L);
-	cpc_writel(&plx_ctl->init_ctrl,
-		   cpc_readl(&plx_ctl->init_ctrl) & ~0x20000000);
-
-}
-
-static void show_version(void)
-{
-	char *rcsvers, *rcsdate, *tmp;
-
-	rcsvers = strchr(rcsid, ' ');
-	rcsvers++;
-	tmp = strchr(rcsvers, ' ');
-	*tmp++ = '\0';
-	rcsdate = strchr(tmp, ' ');
-	rcsdate++;
-	tmp = strrchr(rcsdate, ' ');
-	*tmp = '\0';
-	pr_info("Cyclades-PC300 driver %s %s\n", rcsvers, rcsdate);
-}				/* show_version */
-
-static const struct net_device_ops cpc_netdev_ops = {
-	.ndo_open		= cpc_open,
-	.ndo_stop		= cpc_close,
-	.ndo_tx_timeout		= cpc_tx_timeout,
-	.ndo_set_mac_address	= NULL,
-	.ndo_change_mtu		= cpc_change_mtu,
-	.ndo_do_ioctl		= cpc_ioctl,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-static void cpc_init_card(pc300_t * card)
-{
-	int i, devcount = 0;
-	static int board_nbr = 1;
-
-	/* Enable interrupts on the PCI bridge */
-	plx_init(card);
-	cpc_writew(card->hw.plxbase + card->hw.intctl_reg,
-		   cpc_readw(card->hw.plxbase + card->hw.intctl_reg) | 0x0040);
-
-#ifdef USE_PCI_CLOCK
-	/* Set board clock to PCI clock */
-	cpc_writel(card->hw.plxbase + card->hw.gpioc_reg,
-		   cpc_readl(card->hw.plxbase + card->hw.gpioc_reg) | 0x00000004UL);
-	card->hw.clock = PC300_PCI_CLOCK;
-#else
-	/* Set board clock to internal oscillator clock */
-	cpc_writel(card->hw.plxbase + card->hw.gpioc_reg,
-		   cpc_readl(card->hw.plxbase + card->hw.gpioc_reg) & ~0x00000004UL);
-	card->hw.clock = PC300_OSC_CLOCK;
-#endif
-
-	/* Detect actual on-board RAM size */
-	card->hw.ramsize = detect_ram(card);
-
-	/* Set Global SCA-II registers */
-	cpc_writeb(card->hw.scabase + PCR, PCR_PR2);
-	cpc_writeb(card->hw.scabase + BTCR, 0x10);
-	cpc_writeb(card->hw.scabase + WCRL, 0);
-	cpc_writeb(card->hw.scabase + DMER, 0x80);
-
-	if (card->hw.type == PC300_TE) {
-		u8 reg1;
-
-		/* Check CPLD version */
-		reg1 = cpc_readb(card->hw.falcbase + CPLD_REG1);
-		cpc_writeb(card->hw.falcbase + CPLD_REG1, (reg1 + 0x5a));
-		if (cpc_readb(card->hw.falcbase + CPLD_REG1) == reg1) {
-			/* New CPLD */
-			card->hw.cpld_id = cpc_readb(card->hw.falcbase + CPLD_ID_REG);
-			card->hw.cpld_reg1 = CPLD_V2_REG1;
-			card->hw.cpld_reg2 = CPLD_V2_REG2;
-		} else {
-			/* old CPLD */
-			card->hw.cpld_id = 0;
-			card->hw.cpld_reg1 = CPLD_REG1;
-			card->hw.cpld_reg2 = CPLD_REG2;
-			cpc_writeb(card->hw.falcbase + CPLD_REG1, reg1);
-		}
-
-		/* Enable the board's global clock */
-		cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1,
-			   cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) |
-			   CPLD_REG1_GLOBAL_CLK);
-
-	}
-
-	for (i = 0; i < card->hw.nchan; i++) {
-		pc300ch_t *chan = &card->chan[i];
-		pc300dev_t *d = &chan->d;
-		hdlc_device *hdlc;
-		struct net_device *dev;
-
-		chan->card = card;
-		chan->channel = i;
-		chan->conf.phys_settings.clock_rate = 0;
-		chan->conf.phys_settings.clock_type = CLOCK_EXT;
-		chan->conf.proto_settings.encoding = ENCODING_NRZ;
-		chan->conf.proto_settings.parity = PARITY_CRC16_PR1_CCITT;
-		switch (card->hw.type) {
-			case PC300_TE:
-				chan->conf.media = IF_IFACE_T1;
-				chan->conf.lcode = PC300_LC_B8ZS;
-				chan->conf.fr_mode = PC300_FR_ESF;
-				chan->conf.lbo = PC300_LBO_0_DB;
-				chan->conf.rx_sens = PC300_RX_SENS_SH;
-				chan->conf.tslot_bitmap = 0xffffffffUL;
-				break;
-
-			case PC300_X21:
-				chan->conf.media = IF_IFACE_X21;
-				break;
-
-			case PC300_RSV:
-			default:
-				chan->conf.media = IF_IFACE_V35;
-				break;
-		}
-		chan->conf.proto = IF_PROTO_PPP;
-		chan->tx_first_bd = 0;
-		chan->tx_next_bd = 0;
-		chan->rx_first_bd = 0;
-		chan->rx_last_bd = N_DMA_RX_BUF - 1;
-		chan->nfree_tx_bd = N_DMA_TX_BUF;
-
-		d->chan = chan;
-		d->trace_on = 0;
-		d->line_on = 0;
-		d->line_off = 0;
-
-		dev = alloc_hdlcdev(d);
-		if (dev == NULL)
-			continue;
-
-		hdlc = dev_to_hdlc(dev);
-		hdlc->xmit = cpc_queue_xmit;
-		hdlc->attach = cpc_attach;
-		d->dev = dev;
-		dev->mem_start = card->hw.ramphys;
-		dev->mem_end = card->hw.ramphys + card->hw.ramsize - 1;
-		dev->irq = card->hw.irq;
-		dev->tx_queue_len = PC300_TX_QUEUE_LEN;
-		dev->mtu = PC300_DEF_MTU;
-
-		dev->netdev_ops = &cpc_netdev_ops;
-		dev->watchdog_timeo = PC300_TX_TIMEOUT;
-
-		if (register_hdlc_device(dev) == 0) {
-			printk("%s: Cyclades-PC300/", dev->name);
-			switch (card->hw.type) {
-				case PC300_TE:
-					if (card->hw.bus == PC300_PMC) {
-						printk("TE-M");
-					} else {
-						printk("TE  ");
-					}
-					break;
-
-				case PC300_X21:
-					printk("X21 ");
-					break;
-
-				case PC300_RSV:
-				default:
-					printk("RSV ");
-					break;
-			}
-			printk (" #%d, %dKB of RAM at 0x%08x, IRQ%d, channel %d.\n",
-				 board_nbr, card->hw.ramsize / 1024,
-				 card->hw.ramphys, card->hw.irq, i + 1);
-			devcount++;
-		} else {
-			printk ("Dev%d on card(0x%08x): unable to allocate i/f name.\n",
-				 i + 1, card->hw.ramphys);
-			free_netdev(dev);
-			continue;
-		}
-	}
-	spin_lock_init(&card->card_lock);
-
-	board_nbr++;
-}
-
-static int __devinit
-cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
-	int err, eeprom_outdated = 0;
-	u16 device_id;
-	pc300_t *card;
-
-	if ((err = pci_enable_device(pdev)) < 0)
-		return err;
-
-	card = kzalloc(sizeof(pc300_t), GFP_KERNEL);
-	if (card == NULL) {
-		printk("PC300 found at RAM 0x%016llx, "
-		       "but could not allocate card structure.\n",
-		       (unsigned long long)pci_resource_start(pdev, 3));
-		err = -ENOMEM;
-		goto err_disable_dev;
-	}
-
-	err = -ENODEV;
-
-	/* read PCI configuration area */
-	device_id = ent->device;
-	card->hw.irq = pdev->irq;
-	card->hw.iophys = pci_resource_start(pdev, 1);
-	card->hw.iosize = pci_resource_len(pdev, 1);
-	card->hw.scaphys = pci_resource_start(pdev, 2);
-	card->hw.scasize = pci_resource_len(pdev, 2);
-	card->hw.ramphys = pci_resource_start(pdev, 3);
-	card->hw.alloc_ramsize = pci_resource_len(pdev, 3);
-	card->hw.falcphys = pci_resource_start(pdev, 4);
-	card->hw.falcsize = pci_resource_len(pdev, 4);
-	card->hw.plxphys = pci_resource_start(pdev, 5);
-	card->hw.plxsize = pci_resource_len(pdev, 5);
-
-	switch (device_id) {
-		case PCI_DEVICE_ID_PC300_RX_1:
-		case PCI_DEVICE_ID_PC300_TE_1:
-		case PCI_DEVICE_ID_PC300_TE_M_1:
-			card->hw.nchan = 1;
-			break;
-
-		case PCI_DEVICE_ID_PC300_RX_2:
-		case PCI_DEVICE_ID_PC300_TE_2:
-		case PCI_DEVICE_ID_PC300_TE_M_2:
-		default:
-			card->hw.nchan = PC300_MAXCHAN;
-			break;
-	}
-#ifdef PC300_DEBUG_PCI
-	printk("cpc (bus=0x0%x,pci_id=0x%x,", pdev->bus->number, pdev->devfn);
-	printk("rev_id=%d) IRQ%d\n", pdev->revision, card->hw.irq);
-	printk("cpc:found  ramaddr=0x%08lx plxaddr=0x%08lx "
-	       "ctladdr=0x%08lx falcaddr=0x%08lx\n",
-	       card->hw.ramphys, card->hw.plxphys, card->hw.scaphys,
-	       card->hw.falcphys);
-#endif
-	/* Although we don't use this I/O region, we should
-	 * request it from the kernel anyway, to avoid problems
-	 * with other drivers accessing it. */
-	if (!request_region(card->hw.iophys, card->hw.iosize, "PLX Registers")) {
-		/* In case we can't allocate it, warn user */
-		printk("WARNING: couldn't allocate I/O region for PC300 board "
-		       "at 0x%08x!\n", card->hw.ramphys);
-	}
-
-	if (card->hw.plxphys) {
-		pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, card->hw.plxphys);
-	} else {
-		eeprom_outdated = 1;
-		card->hw.plxphys = pci_resource_start(pdev, 0);
-		card->hw.plxsize = pci_resource_len(pdev, 0);
-	}
-
-	if (!request_mem_region(card->hw.plxphys, card->hw.plxsize,
-				"PLX Registers")) {
-		printk("PC300 found at RAM 0x%08x, "
-		       "but could not allocate PLX mem region.\n",
-		       card->hw.ramphys);
-		goto err_release_io;
-	}
-	if (!request_mem_region(card->hw.ramphys, card->hw.alloc_ramsize,
-				"On-board RAM")) {
-		printk("PC300 found at RAM 0x%08x, "
-		       "but could not allocate RAM mem region.\n",
-		       card->hw.ramphys);
-		goto err_release_plx;
-	}
-	if (!request_mem_region(card->hw.scaphys, card->hw.scasize,
-				"SCA-II Registers")) {
-		printk("PC300 found at RAM 0x%08x, "
-		       "but could not allocate SCA mem region.\n",
-		       card->hw.ramphys);
-		goto err_release_ram;
-	}
-
-	card->hw.plxbase = ioremap(card->hw.plxphys, card->hw.plxsize);
-	card->hw.rambase = ioremap(card->hw.ramphys, card->hw.alloc_ramsize);
-	card->hw.scabase = ioremap(card->hw.scaphys, card->hw.scasize);
-	switch (device_id) {
-		case PCI_DEVICE_ID_PC300_TE_1:
-		case PCI_DEVICE_ID_PC300_TE_2:
-		case PCI_DEVICE_ID_PC300_TE_M_1:
-		case PCI_DEVICE_ID_PC300_TE_M_2:
-			request_mem_region(card->hw.falcphys, card->hw.falcsize,
-					   "FALC Registers");
-			card->hw.falcbase = ioremap(card->hw.falcphys, card->hw.falcsize);
-			break;
-
-		case PCI_DEVICE_ID_PC300_RX_1:
-		case PCI_DEVICE_ID_PC300_RX_2:
-		default:
-			card->hw.falcbase = NULL;
-			break;
-	}
-
-#ifdef PC300_DEBUG_PCI
-	printk("cpc: relocate ramaddr=0x%08lx plxaddr=0x%08lx "
-	       "ctladdr=0x%08lx falcaddr=0x%08lx\n",
-	       card->hw.rambase, card->hw.plxbase, card->hw.scabase,
-	       card->hw.falcbase);
-#endif
-
-	/* Set PCI drv pointer to the card structure */
-	pci_set_drvdata(pdev, card);
-
-	/* Set board type */
-	switch (device_id) {
-		case PCI_DEVICE_ID_PC300_TE_1:
-		case PCI_DEVICE_ID_PC300_TE_2:
-		case PCI_DEVICE_ID_PC300_TE_M_1:
-		case PCI_DEVICE_ID_PC300_TE_M_2:
-			card->hw.type = PC300_TE;
-
-			if ((device_id == PCI_DEVICE_ID_PC300_TE_M_1) ||
-			    (device_id == PCI_DEVICE_ID_PC300_TE_M_2)) {
-				card->hw.bus = PC300_PMC;
-				/* Set PLX register offsets */
-				card->hw.gpioc_reg = 0x54;
-				card->hw.intctl_reg = 0x4c;
-			} else {
-				card->hw.bus = PC300_PCI;
-				/* Set PLX register offsets */
-				card->hw.gpioc_reg = 0x50;
-				card->hw.intctl_reg = 0x4c;
-			}
-			break;
-
-		case PCI_DEVICE_ID_PC300_RX_1:
-		case PCI_DEVICE_ID_PC300_RX_2:
-		default:
-			card->hw.bus = PC300_PCI;
-			/* Set PLX register offsets */
-			card->hw.gpioc_reg = 0x50;
-			card->hw.intctl_reg = 0x4c;
-
-			if ((cpc_readl(card->hw.plxbase + card->hw.gpioc_reg) & PC300_CTYPE_MASK)) {
-				card->hw.type = PC300_X21;
-			} else {
-				card->hw.type = PC300_RSV;
-			}
-			break;
-	}
-
-	/* Allocate IRQ */
-	if (request_irq(card->hw.irq, cpc_intr, IRQF_SHARED, "Cyclades-PC300", card)) {
-		printk ("PC300 found at RAM 0x%08x, but could not allocate IRQ%d.\n",
-			 card->hw.ramphys, card->hw.irq);
-		goto err_io_unmap;
-	}
-
-	cpc_init_card(card);
-
-	if (eeprom_outdated)
-		printk("WARNING: PC300 with outdated EEPROM.\n");
-	return 0;
-
-err_io_unmap:
-	iounmap(card->hw.plxbase);
-	iounmap(card->hw.scabase);
-	iounmap(card->hw.rambase);
-	if (card->hw.type == PC300_TE) {
-		iounmap(card->hw.falcbase);
-		release_mem_region(card->hw.falcphys, card->hw.falcsize);
-	}
-	release_mem_region(card->hw.scaphys, card->hw.scasize);
-err_release_ram:
-	release_mem_region(card->hw.ramphys, card->hw.alloc_ramsize);
-err_release_plx:
-	release_mem_region(card->hw.plxphys, card->hw.plxsize);
-err_release_io:
-	release_region(card->hw.iophys, card->hw.iosize);
-	kfree(card);
-err_disable_dev:
-	pci_disable_device(pdev);
-	return err;
-}
-
-static void __devexit cpc_remove_one(struct pci_dev *pdev)
-{
-	pc300_t *card = pci_get_drvdata(pdev);
-
-	if (card->hw.rambase) {
-		int i;
-
-		/* Disable interrupts on the PCI bridge */
-		cpc_writew(card->hw.plxbase + card->hw.intctl_reg,
-			   cpc_readw(card->hw.plxbase + card->hw.intctl_reg) & ~(0x0040));
-
-		for (i = 0; i < card->hw.nchan; i++) {
-			unregister_hdlc_device(card->chan[i].d.dev);
-		}
-		iounmap(card->hw.plxbase);
-		iounmap(card->hw.scabase);
-		iounmap(card->hw.rambase);
-		release_mem_region(card->hw.plxphys, card->hw.plxsize);
-		release_mem_region(card->hw.ramphys, card->hw.alloc_ramsize);
-		release_mem_region(card->hw.scaphys, card->hw.scasize);
-		release_region(card->hw.iophys, card->hw.iosize);
-		if (card->hw.type == PC300_TE) {
-			iounmap(card->hw.falcbase);
-			release_mem_region(card->hw.falcphys, card->hw.falcsize);
-		}
-		for (i = 0; i < card->hw.nchan; i++)
-			if (card->chan[i].d.dev)
-				free_netdev(card->chan[i].d.dev);
-		if (card->hw.irq)
-			free_irq(card->hw.irq, card);
-		kfree(card);
-		pci_disable_device(pdev);
-	}
-}
-
-static struct pci_driver cpc_driver = {
-	.name           = "pc300",
-	.id_table       = cpc_pci_dev_id,
-	.probe          = cpc_init_one,
-	.remove         = __devexit_p(cpc_remove_one),
-};
-
-static int __init cpc_init(void)
-{
-	show_version();
-	return pci_register_driver(&cpc_driver);
-}
-
-static void __exit cpc_cleanup_module(void)
-{
-	pci_unregister_driver(&cpc_driver);
-}
-
-module_init(cpc_init);
-module_exit(cpc_cleanup_module);
-
-MODULE_DESCRIPTION("Cyclades-PC300 cards driver");
-MODULE_AUTHOR(  "Author: Ivan Passos <ivan@cyclades.com>\r\n"
-                "Maintainer: PC300 Maintainer <pc300@cyclades.com");
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/net/wan/pc300_tty.c b/drivers/net/wan/pc300_tty.c
deleted file mode 100644
index 4709f4228561..000000000000
--- a/drivers/net/wan/pc300_tty.c
+++ /dev/null
@@ -1,1079 +0,0 @@
-/*
- * pc300_tty.c	Cyclades-PC300(tm) TTY Driver.
- *
- * Author:	Regina Kodato <reginak@cyclades.com>
- *
- * Copyright:	(c) 1999-2002 Cyclades Corp.
- *
- *	This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *   
- *  $Log: pc300_tty.c,v $
- *  Revision 3.7  2002/03/07 14:17:09  henrique
- *  License data fixed
- *
- *  Revision 3.6  2001/12/10 12:29:42  regina
- *  Fix the MLPPP bug
- *
- *  Revision 3.5  2001/10/31 11:20:05  regina
- *  automatic pppd starts
- *
- *  Revision 3.4  2001/08/06 12:01:51  regina
- *  problem in DSR_DE bit
- *
- *  Revision 3.3  2001/07/26 22:58:41  regina
- *  update EDA value
- *
- *  Revision 3.2  2001/07/12 13:11:20  regina
- *  bug fix - DCD-OFF in pc300 tty driver
- *
- *	DMA transmission bug fix
- *  
- *  Revision 3.1  2001/06/22 13:13:02  regina
- *  MLPPP implementation
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/if.h>
-#include <linux/skbuff.h>
-/* TTY includes */
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#include "pc300.h"
-
-/* defines and macros */
-/* TTY Global definitions */
-#define	CPC_TTY_NPORTS	8	/* maximum number of the sync tty connections */
-#define	CPC_TTY_MAJOR	CYCLADES_MAJOR	
-#define CPC_TTY_MINOR_START	240	/* minor of the first PC300 interface */
-
-#define CPC_TTY_MAX_MTU	2000	
-
-/* tty interface state */
-#define	CPC_TTY_ST_IDLE	0
-#define CPC_TTY_ST_INIT	1	/* configured with MLPPP and up */
-#define CPC_TTY_ST_OPEN	2	/* opened by application */
-
-#define	CPC_TTY_LOCK(card,flags)\
-	do {\
-		spin_lock_irqsave(&card->card_lock, flags);	\
-	} while (0)
-
-#define CPC_TTY_UNLOCK(card,flags)	\
-	do {\
-		spin_unlock_irqrestore(&card->card_lock, flags);	\
-	} while (0)
-
-//#define	CPC_TTY_DBG(format,a...)	printk(format,##a)
-#define	CPC_TTY_DBG(format,a...)
-
-/* data structures */
-typedef struct _st_cpc_rx_buf {
-	struct _st_cpc_rx_buf	*next;
-	int		size;
-	unsigned char	data[1];
-} st_cpc_rx_buf;
-
-struct st_cpc_rx_list {
-	st_cpc_rx_buf	*first;
-	st_cpc_rx_buf	*last;
-};
-
-typedef	struct _st_cpc_tty_area {
-	int		state;		/* state of the TTY interface */
-	int		num_open;	
-	unsigned int 	tty_minor;	/* minor this interface */
-	volatile struct st_cpc_rx_list buf_rx;	/* ptr. to reception buffer */
-	unsigned char*	buf_tx;		/* ptr. to transmission buffer */
-	pc300dev_t*	pc300dev;	/* ptr. to info struct in PC300 driver */
-	unsigned char	name[20];	/* interf. name + "-tty" */
-	struct tty_struct *tty;		
-	struct work_struct tty_tx_work; /* tx work - tx interrupt */
-	struct work_struct tty_rx_work; /* rx work - rx interrupt */
-	} st_cpc_tty_area;
-
-/* TTY data structures */
-static struct tty_driver serial_drv;
-
-/* local variables */
-static st_cpc_tty_area	cpc_tty_area[CPC_TTY_NPORTS];
-
-static int cpc_tty_cnt = 0;	/* number of intrfaces configured with MLPPP */
-static int cpc_tty_unreg_flag = 0;
-
-/* TTY functions prototype */
-static int cpc_tty_open(struct tty_struct *tty, struct file *flip);
-static void cpc_tty_close(struct tty_struct *tty, struct file *flip);
-static int cpc_tty_write(struct tty_struct *tty, const unsigned char *buf, int count);
-static int cpc_tty_write_room(struct tty_struct *tty);
-static int cpc_tty_chars_in_buffer(struct tty_struct *tty);
-static void cpc_tty_flush_buffer(struct tty_struct *tty);
-static void cpc_tty_hangup(struct tty_struct *tty);
-static void cpc_tty_rx_work(struct work_struct *work);
-static void cpc_tty_tx_work(struct work_struct *work);
-static int cpc_tty_send_to_card(pc300dev_t *dev,void *buf, int len);
-static void cpc_tty_trace(pc300dev_t *dev, char* buf, int len, char rxtx);
-static void cpc_tty_signal_off(pc300dev_t *pc300dev, unsigned char);
-static void cpc_tty_signal_on(pc300dev_t *pc300dev, unsigned char);
-
-static int pc300_tiocmset(struct tty_struct *, unsigned int, unsigned int);
-static int pc300_tiocmget(struct tty_struct *);
-
-/* functions called by PC300 driver */
-void cpc_tty_init(pc300dev_t *dev);
-void cpc_tty_unregister_service(pc300dev_t *pc300dev);
-void cpc_tty_receive(pc300dev_t *pc300dev);
-void cpc_tty_trigger_poll(pc300dev_t *pc300dev);
-
-/*
- * PC300 TTY clear "signal"
- */
-static void cpc_tty_signal_off(pc300dev_t *pc300dev, unsigned char signal)
-{
-	pc300ch_t *pc300chan = (pc300ch_t *)pc300dev->chan; 
-	pc300_t *card = (pc300_t *) pc300chan->card; 
-	int ch = pc300chan->channel; 
-	unsigned long flags; 
-
-	CPC_TTY_DBG("%s-tty: Clear signal %x\n",
-		pc300dev->dev->name, signal);
-	CPC_TTY_LOCK(card, flags); 
-	cpc_writeb(card->hw.scabase + M_REG(CTL,ch), 
-		cpc_readb(card->hw.scabase+M_REG(CTL,ch))& signal);
-	CPC_TTY_UNLOCK(card,flags); 
-}
-
-/*
- * PC300 TTY set "signal" to ON
- */
-static void cpc_tty_signal_on(pc300dev_t *pc300dev, unsigned char signal)
-{
-	pc300ch_t *pc300chan = (pc300ch_t *)pc300dev->chan; 
-	pc300_t *card = (pc300_t *) pc300chan->card; 
-	int ch = pc300chan->channel; 
-	unsigned long flags; 
-
-	CPC_TTY_DBG("%s-tty: Set signal %x\n",
-		pc300dev->dev->name, signal);
-	CPC_TTY_LOCK(card, flags); 
-	cpc_writeb(card->hw.scabase + M_REG(CTL,ch), 
-		cpc_readb(card->hw.scabase+M_REG(CTL,ch))& ~signal);
-	CPC_TTY_UNLOCK(card,flags); 
-}
-
-
-static const struct tty_operations pc300_ops = {
-	.open = cpc_tty_open,
-	.close = cpc_tty_close,
-	.write = cpc_tty_write,
-	.write_room = cpc_tty_write_room,
-	.chars_in_buffer = cpc_tty_chars_in_buffer,
-	.tiocmset = pc300_tiocmset,
-	.tiocmget = pc300_tiocmget,
-	.flush_buffer = cpc_tty_flush_buffer,
-	.hangup = cpc_tty_hangup,
-};
-
-
-/*
- * PC300 TTY initialization routine
- *
- * This routine is called by the PC300 driver during board configuration 
- * (ioctl=SIOCSP300CONF). At this point the adapter is completely
- * initialized.
- * o verify kernel version (only 2.4.x)
- * o register TTY driver
- * o init cpc_tty_area struct
- */
-void cpc_tty_init(pc300dev_t *pc300dev)
-{
-	unsigned long port;
-	int aux;
-	st_cpc_tty_area * cpc_tty;
-
-	/* hdlcX - X=interface number */
-	port = pc300dev->dev->name[4] - '0';
-	if (port >= CPC_TTY_NPORTS) {
-		printk("%s-tty: invalid interface selected (0-%i): %li",
-			pc300dev->dev->name,
-			CPC_TTY_NPORTS-1,port);
-		return;
-	}
-
-	if (cpc_tty_cnt == 0) { /* first TTY connection -> register driver */
-		CPC_TTY_DBG("%s-tty: driver init, major:%i, minor range:%i=%i\n",
-			pc300dev->dev->name,
-			CPC_TTY_MAJOR, CPC_TTY_MINOR_START,
-			CPC_TTY_MINOR_START+CPC_TTY_NPORTS);
-		/* initialize tty driver struct */
-		memset(&serial_drv,0,sizeof(struct tty_driver));
-		serial_drv.magic = TTY_DRIVER_MAGIC;
-		serial_drv.owner = THIS_MODULE;
-		serial_drv.driver_name = "pc300_tty";
-		serial_drv.name = "ttyCP";
-		serial_drv.major = CPC_TTY_MAJOR;
-		serial_drv.minor_start = CPC_TTY_MINOR_START;
-		serial_drv.num = CPC_TTY_NPORTS;
-		serial_drv.type = TTY_DRIVER_TYPE_SERIAL;
-		serial_drv.subtype = SERIAL_TYPE_NORMAL;
-
-		serial_drv.init_termios = tty_std_termios;
-		serial_drv.init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL;
-		serial_drv.flags = TTY_DRIVER_REAL_RAW;
-
-		/* interface routines from the upper tty layer to the tty driver */
-		tty_set_operations(&serial_drv, &pc300_ops);
-
-		/* register the TTY driver */
-		if (tty_register_driver(&serial_drv)) { 
-			printk("%s-tty: Failed to register serial driver! ",
-				pc300dev->dev->name);
-		   	return;
-		} 
-
-		memset((void *)cpc_tty_area, 0,
-								sizeof(st_cpc_tty_area) * CPC_TTY_NPORTS);
-	}
-
-	cpc_tty = &cpc_tty_area[port];
-	
-	if (cpc_tty->state != CPC_TTY_ST_IDLE) {
-		CPC_TTY_DBG("%s-tty: TTY port %i, already in use.\n",
-				pc300dev->dev->name, port);
-		return;
-	}
-
-	cpc_tty_cnt++;
-	cpc_tty->state = CPC_TTY_ST_INIT; 
-	cpc_tty->num_open= 0;
-	cpc_tty->tty_minor = port + CPC_TTY_MINOR_START;
-	cpc_tty->pc300dev = pc300dev; 
-
-	INIT_WORK(&cpc_tty->tty_tx_work, cpc_tty_tx_work);
-	INIT_WORK(&cpc_tty->tty_rx_work, cpc_tty_rx_work);
-	
-	cpc_tty->buf_rx.first = cpc_tty->buf_rx.last = NULL;
-
-	pc300dev->cpc_tty = (void *)cpc_tty; 
-	
-	aux = strlen(pc300dev->dev->name);
-	memcpy(cpc_tty->name, pc300dev->dev->name, aux);
-	memcpy(&cpc_tty->name[aux], "-tty", 5);
-	
-	cpc_open(pc300dev->dev);
-	cpc_tty_signal_off(pc300dev, CTL_DTR);
-
-	CPC_TTY_DBG("%s: Initializing TTY Sync Driver, tty major#%d minor#%i\n",
-			cpc_tty->name,CPC_TTY_MAJOR,cpc_tty->tty_minor); 
-	return; 
-} 
-
-/*
- * PC300 TTY OPEN routine
- *
- * This routine is called by the tty driver to open the interface 
- * o verify minor
- * o allocate buffer to Rx and Tx
- */
-static int cpc_tty_open(struct tty_struct *tty, struct file *flip)
-{
-	int port ;
-	st_cpc_tty_area *cpc_tty;
-
-	if (!tty) { 
-		return -ENODEV;
-	} 
-
-	port = tty->index;
-
-	if ((port < 0) || (port >= CPC_TTY_NPORTS)){ 
-		CPC_TTY_DBG("pc300_tty: open invalid port %d\n", port);
-		return -ENODEV;
-	} 
-
-	cpc_tty = &cpc_tty_area[port];
-	
-	if (cpc_tty->state == CPC_TTY_ST_IDLE){
-		CPC_TTY_DBG("%s: open - invalid interface, port=%d\n",
-					cpc_tty->name, tty->index);
-		return -ENODEV;
-	}
-
-	if (cpc_tty->num_open == 0) { /* first open of this tty */
-		if (!cpc_tty_area[port].buf_tx){
-			cpc_tty_area[port].buf_tx = kmalloc(CPC_TTY_MAX_MTU,GFP_KERNEL);
-			if (!cpc_tty_area[port].buf_tx) {
-				CPC_TTY_DBG("%s: error in memory allocation\n",cpc_tty->name);
-				return -ENOMEM;
-			}
-		} 
-
-		if (cpc_tty_area[port].buf_rx.first) {
-			unsigned char * aux;
-			while (cpc_tty_area[port].buf_rx.first) {
-				aux = (unsigned char *)cpc_tty_area[port].buf_rx.first;
-				cpc_tty_area[port].buf_rx.first = cpc_tty_area[port].buf_rx.first->next;
-				kfree(aux);
-			}
-			cpc_tty_area[port].buf_rx.first = NULL;
-			cpc_tty_area[port].buf_rx.last = NULL;
-		}
-
-		cpc_tty_area[port].state = CPC_TTY_ST_OPEN;
-		cpc_tty_area[port].tty = tty;
-		tty->driver_data = &cpc_tty_area[port];
-
-		cpc_tty_signal_on(cpc_tty->pc300dev, CTL_DTR);
-	} 
-
-	cpc_tty->num_open++;
-
-	CPC_TTY_DBG("%s: opening TTY driver\n", cpc_tty->name);
-	
-	/* avisar driver PC300 */ 
-	return 0; 
-}
-
-/*
- * PC300 TTY CLOSE routine
- *
- * This routine is called by the tty driver to close the interface 
- * o call close channel in PC300 driver (cpc_closech)
- * o free Rx and Tx buffers
- */
-
-static void cpc_tty_close(struct tty_struct *tty, struct file *flip)
-{
-	st_cpc_tty_area    *cpc_tty;
-	unsigned long flags;
-	int res;
-
-	if (!tty || !tty->driver_data ) {
-		CPC_TTY_DBG("hdlx-tty: no TTY in close\n");
-		return;
-	}
-
-	cpc_tty = (st_cpc_tty_area *) tty->driver_data;
-
-	if ((cpc_tty->tty != tty)|| (cpc_tty->state != CPC_TTY_ST_OPEN)) {
-		CPC_TTY_DBG("%s: TTY is not opened\n",cpc_tty->name);
-		return;
-	}
-   	
-	if (!cpc_tty->num_open) {
-		CPC_TTY_DBG("%s: TTY is closed\n",cpc_tty->name);
-		return;
-	}
-
-	if (--cpc_tty->num_open > 0) {
-		CPC_TTY_DBG("%s: TTY closed\n",cpc_tty->name);
-		return;
-	}
-
-	cpc_tty_signal_off(cpc_tty->pc300dev, CTL_DTR);
-
-	CPC_TTY_LOCK(cpc_tty->pc300dev->chan->card, flags);  /* lock irq */ 
-	cpc_tty->tty = NULL;
-	cpc_tty->state = CPC_TTY_ST_INIT;
-	CPC_TTY_UNLOCK(cpc_tty->pc300dev->chan->card, flags); /* unlock irq */ 
-	
-	if (cpc_tty->buf_rx.first) {
-		unsigned char * aux;
-		while (cpc_tty->buf_rx.first) {
-			aux = (unsigned char *)cpc_tty->buf_rx.first;
-			cpc_tty->buf_rx.first = cpc_tty->buf_rx.first->next;
-			kfree(aux);
-		}
-		cpc_tty->buf_rx.first = NULL;
-		cpc_tty->buf_rx.last = NULL;
-	}
-	
-	kfree(cpc_tty->buf_tx);
-	cpc_tty->buf_tx = NULL;
-
-	CPC_TTY_DBG("%s: TTY closed\n",cpc_tty->name);
-	
-	if (!serial_drv.refcount && cpc_tty_unreg_flag) {
-		cpc_tty_unreg_flag = 0;
-		CPC_TTY_DBG("%s: unregister the tty driver\n", cpc_tty->name);
-		if ((res=tty_unregister_driver(&serial_drv))) { 
-			CPC_TTY_DBG("%s: ERROR ->unregister the tty driver error=%d\n",
-							cpc_tty->name,res);
-		}
-	}
-	return; 
-} 
-
-/*
- * PC300 TTY WRITE routine
- *
- * This routine is called by the tty driver to write a series of characters
- * to the tty device. The characters may come from user or kernel space.
- * o verify the DCD signal
- * o send characters to board and start the transmission
- */
-static int cpc_tty_write(struct tty_struct *tty, const unsigned char *buf, int count)
-{
-	st_cpc_tty_area    *cpc_tty; 
-	pc300ch_t *pc300chan; 
-	pc300_t *card; 
-	int ch; 
-	unsigned long flags; 
-	struct net_device_stats *stats; 
-
-	if (!tty || !tty->driver_data ) { 
-		CPC_TTY_DBG("hdlcX-tty: no TTY in write\n");
-		return -ENODEV;
-	} 
-
-	cpc_tty = (st_cpc_tty_area *) tty->driver_data; 
-
-	if ((cpc_tty->tty != tty) ||  (cpc_tty->state != CPC_TTY_ST_OPEN)) { 
-		CPC_TTY_DBG("%s: TTY is not opened\n", cpc_tty->name);
-		return -ENODEV; 
-	}
-
-	if (count > CPC_TTY_MAX_MTU) { 
-		CPC_TTY_DBG("%s: count is invalid\n",cpc_tty->name);
-		return -EINVAL;        /* frame too big */ 
-	}
-
-	CPC_TTY_DBG("%s: cpc_tty_write data len=%i\n",cpc_tty->name,count);
-	
-	pc300chan = (pc300ch_t *)((pc300dev_t*)cpc_tty->pc300dev)->chan; 
-	stats = &cpc_tty->pc300dev->dev->stats;
-	card = (pc300_t *) pc300chan->card;
-	ch = pc300chan->channel; 
-
-	/* verify DCD signal*/ 
-	if (cpc_readb(card->hw.scabase + M_REG(ST3,ch)) & ST3_DCD) { 
-		/* DCD is OFF */ 
-		CPC_TTY_DBG("%s : DCD is OFF\n", cpc_tty->name);
-		stats->tx_errors++;
-		stats->tx_carrier_errors++;
-		CPC_TTY_LOCK(card, flags); 
-		cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_TX_BUF_CLR); 
-		
-		if (card->hw.type == PC300_TE) { 
-			cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, 
-				cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) & 
-				~(CPLD_REG2_FALC_LED1 << (2 *ch))); 
-		}
-
-		CPC_TTY_UNLOCK(card, flags); 
-
-		return -EINVAL; 
-	}
-
-	if (cpc_tty_send_to_card(cpc_tty->pc300dev, (void*)buf, count)) { 
-	   /* failed to send */
-	   CPC_TTY_DBG("%s: trasmition error\n", cpc_tty->name);
-	   return 0;
-	}
-	return count; 
-} 
-
-/*
- * PC300 TTY Write Room routine
- * 
- * This routine returns the numbers of characteres the tty driver will accept
- * for queuing to be written. 
- * o return MTU
- */
-static int cpc_tty_write_room(struct tty_struct *tty)
-{
-	st_cpc_tty_area    *cpc_tty; 
-
-	if (!tty || !tty->driver_data ) { 
-		CPC_TTY_DBG("hdlcX-tty: no TTY to write room\n");
-		return -ENODEV;
-	}
-
-	cpc_tty = (st_cpc_tty_area *) tty->driver_data; 
-
-	if ((cpc_tty->tty != tty) ||  (cpc_tty->state != CPC_TTY_ST_OPEN)) { 
-		CPC_TTY_DBG("%s: TTY is not opened\n",cpc_tty->name);
-		return -ENODEV; 
-	}
-   	
-	CPC_TTY_DBG("%s: write room\n",cpc_tty->name);
-	
-	return CPC_TTY_MAX_MTU;
-} 
-
-/*
- * PC300 TTY chars in buffer routine
- * 
- * This routine returns the chars number in the transmission buffer 
- * o returns 0
- */
-static int cpc_tty_chars_in_buffer(struct tty_struct *tty)
-{
-	st_cpc_tty_area    *cpc_tty; 
-
-	if (!tty || !tty->driver_data ) {
-		CPC_TTY_DBG("hdlcX-tty: no TTY to chars in buffer\n");
-		return -ENODEV; 
-	}
-
-	cpc_tty = (st_cpc_tty_area *) tty->driver_data; 
-
-	if ((cpc_tty->tty != tty) || (cpc_tty->state != CPC_TTY_ST_OPEN)) { 
-		CPC_TTY_DBG("%s: TTY is not opened\n",cpc_tty->name);
-		return -ENODEV; 
-	}
-   
-	return 0;
-} 
-
-static int pc300_tiocmset(struct tty_struct *tty,
-			  unsigned int set, unsigned int clear)
-{
-	st_cpc_tty_area    *cpc_tty; 
-
-	CPC_TTY_DBG("%s: set:%x clear:%x\n", __func__, set, clear);
-
-	if (!tty || !tty->driver_data ) {
-	   	CPC_TTY_DBG("hdlcX-tty: no TTY to chars in buffer\n");	
-		return -ENODEV; 
-	}
-
-	cpc_tty = (st_cpc_tty_area *) tty->driver_data; 
-
-	if (set & TIOCM_RTS)
-		cpc_tty_signal_on(cpc_tty->pc300dev, CTL_RTS);
-	if (set & TIOCM_DTR)
-		cpc_tty_signal_on(cpc_tty->pc300dev, CTL_DTR);
-
-	if (clear & TIOCM_RTS)
-		cpc_tty_signal_off(cpc_tty->pc300dev, CTL_RTS);
-	if (clear & TIOCM_DTR)
-		cpc_tty_signal_off(cpc_tty->pc300dev, CTL_DTR);
-
-	return 0;
-}
-
-static int pc300_tiocmget(struct tty_struct *tty)
-{
-	unsigned int result;
-	unsigned char status;
-	unsigned long flags;
-	st_cpc_tty_area  *cpc_tty = (st_cpc_tty_area *) tty->driver_data;
-	pc300dev_t *pc300dev = cpc_tty->pc300dev;
-	pc300ch_t *pc300chan = (pc300ch_t *)pc300dev->chan;
-	pc300_t *card = (pc300_t *) pc300chan->card;
-	int ch = pc300chan->channel;
-
-	cpc_tty = (st_cpc_tty_area *) tty->driver_data;
-
-	CPC_TTY_DBG("%s-tty: tiocmget\n",
-		((struct net_device*)(pc300dev->hdlc))->name);
-
-	CPC_TTY_LOCK(card, flags);
-	status = cpc_readb(card->hw.scabase+M_REG(CTL,ch));
-	CPC_TTY_UNLOCK(card,flags);
-
-	result = ((status & CTL_DTR) ? TIOCM_DTR : 0) |
-		 ((status & CTL_RTS) ? TIOCM_RTS : 0);
-
-	return result;
-}
-
-/*
- * PC300 TTY Flush Buffer routine
- *
- * This routine resets the transmission buffer 
- */
-static void cpc_tty_flush_buffer(struct tty_struct *tty)
-{ 
-	st_cpc_tty_area    *cpc_tty; 
-	
-	if (!tty || !tty->driver_data ) {
-	   	CPC_TTY_DBG("hdlcX-tty: no TTY to flush buffer\n");	
-		return; 
-	}
-
-	cpc_tty = (st_cpc_tty_area *) tty->driver_data; 
-
-	if ((cpc_tty->tty != tty) ||  (cpc_tty->state != CPC_TTY_ST_OPEN)) { 
-		CPC_TTY_DBG("%s: TTY is not opened\n",cpc_tty->name);
-		return; 
-	}
-
-	CPC_TTY_DBG("%s: call wake_up_interruptible\n",cpc_tty->name);
-
-	tty_wakeup(tty);	
-	return; 
-} 
-
-/*
- * PC300 TTY Hangup routine
- *
- * This routine is called by the tty driver to hangup the interface 
- * o clear DTR signal
- */
-
-static void cpc_tty_hangup(struct tty_struct *tty)
-{ 
-	st_cpc_tty_area    *cpc_tty; 
-	int res;
-
-	if (!tty || !tty->driver_data ) {
-		CPC_TTY_DBG("hdlcX-tty: no TTY to hangup\n");	
-		return ; 
-	}
-
-	cpc_tty = (st_cpc_tty_area *) tty->driver_data; 
-
-	if ((cpc_tty->tty != tty) || (cpc_tty->state != CPC_TTY_ST_OPEN)) {
-		CPC_TTY_DBG("%s: TTY is not opened\n",cpc_tty->name);
-		return ;
-	}
-	if (!serial_drv.refcount && cpc_tty_unreg_flag) {
-		cpc_tty_unreg_flag = 0;
-		CPC_TTY_DBG("%s: unregister the tty driver\n", cpc_tty->name);
-		if ((res=tty_unregister_driver(&serial_drv))) { 
-			CPC_TTY_DBG("%s: ERROR ->unregister the tty driver error=%d\n",
-							cpc_tty->name,res);
-		}
-	}
-	cpc_tty_signal_off(cpc_tty->pc300dev, CTL_DTR);
-}
-
-/*
- * PC300 TTY RX work routine
- * This routine treats RX work
- * o verify read buffer
- * o call the line disc. read
- * o free memory
- */
-static void cpc_tty_rx_work(struct work_struct *work)
-{
-	st_cpc_tty_area *cpc_tty;
-	unsigned long port;
-	int i, j;
-	volatile st_cpc_rx_buf *buf;
-	char flags=0,flg_rx=1; 
-	struct tty_ldisc *ld;
-
-	if (cpc_tty_cnt == 0) return;
-	
-	for (i=0; (i < 4) && flg_rx ; i++) {
-		flg_rx = 0;
-
-		cpc_tty = container_of(work, st_cpc_tty_area, tty_rx_work);
-		port = cpc_tty - cpc_tty_area;
-
-		for (j=0; j < CPC_TTY_NPORTS; j++) {
-			cpc_tty = &cpc_tty_area[port];
-		
-			if ((buf=cpc_tty->buf_rx.first) != NULL) {
-				if (cpc_tty->tty) {
-					ld = tty_ldisc_ref(cpc_tty->tty);
-					if (ld) {
-						if (ld->ops->receive_buf) {
-							CPC_TTY_DBG("%s: call line disc. receive_buf\n",cpc_tty->name);
-							ld->ops->receive_buf(cpc_tty->tty, (char *)(buf->data), &flags, buf->size);
-						}
-						tty_ldisc_deref(ld);
-					}
-				}	
-				cpc_tty->buf_rx.first = cpc_tty->buf_rx.first->next;
-				kfree((void *)buf);
-				buf = cpc_tty->buf_rx.first;
-				flg_rx = 1;
-			}
-			if (++port == CPC_TTY_NPORTS) port = 0;
-		}
-	}
-} 
-
-/*
- * PC300 TTY RX work routine
- *
- * This routine treats RX interrupt. 
- * o read all frames in card
- * o verify the frame size
- * o read the frame in rx buffer
- */
-static void cpc_tty_rx_disc_frame(pc300ch_t *pc300chan)
-{
-	volatile pcsca_bd_t __iomem * ptdescr; 
-	volatile unsigned char status; 
-	pc300_t *card = (pc300_t *)pc300chan->card; 
-	int ch = pc300chan->channel; 
-
-	/* dma buf read */ 
-	ptdescr = (pcsca_bd_t __iomem *)(card->hw.rambase + 
-				RX_BD_ADDR(ch, pc300chan->rx_first_bd)); 
-	while (pc300chan->rx_first_bd != pc300chan->rx_last_bd) { 
-		status = cpc_readb(&ptdescr->status); 
-		cpc_writeb(&ptdescr->status, 0); 
-		cpc_writeb(&ptdescr->len, 0); 
-		pc300chan->rx_first_bd = (pc300chan->rx_first_bd + 1) & 
-					(N_DMA_RX_BUF - 1); 
-		if (status & DST_EOM) { 
-			break; /* end of message */
-		}
-		ptdescr = (pcsca_bd_t __iomem *)(card->hw.rambase + cpc_readl(&ptdescr->next)); 
-	}
-}
-
-void cpc_tty_receive(pc300dev_t *pc300dev)
-{
-	st_cpc_tty_area *cpc_tty; 
-	pc300ch_t *pc300chan = (pc300ch_t *)pc300dev->chan; 
-	pc300_t *card = (pc300_t *)pc300chan->card; 
-	int ch = pc300chan->channel; 
-	volatile pcsca_bd_t  __iomem * ptdescr; 
-	struct net_device_stats *stats = &pc300dev->dev->stats;
-	int rx_len, rx_aux; 
-	volatile unsigned char status; 
-	unsigned short first_bd = pc300chan->rx_first_bd;
-	st_cpc_rx_buf *new = NULL;
-	unsigned char dsr_rx;
-
-	if (pc300dev->cpc_tty == NULL) { 
-		return; 
-	}
-
-	dsr_rx = cpc_readb(card->hw.scabase + DSR_RX(ch));
-
-	cpc_tty = pc300dev->cpc_tty;
-
-	while (1) { 
-		rx_len = 0;
-		ptdescr = (pcsca_bd_t  __iomem *)(card->hw.rambase + RX_BD_ADDR(ch, first_bd));
-		while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) {
-			rx_len += cpc_readw(&ptdescr->len);
-			first_bd = (first_bd + 1) & (N_DMA_RX_BUF - 1);
-			if (status & DST_EOM) {
-				break;
-			}
-			ptdescr = (pcsca_bd_t __iomem *)(card->hw.rambase+cpc_readl(&ptdescr->next));
-		}
-			
-		if (!rx_len) { 
-			if (dsr_rx & DSR_BOF) {
-				/* update EDA */ 
-				cpc_writel(card->hw.scabase + DRX_REG(EDAL, ch), 
-						RX_BD_ADDR(ch, pc300chan->rx_last_bd)); 
-			}
-			kfree(new);
-			return; 
-		}
-		
-		if (rx_len > CPC_TTY_MAX_MTU) { 
-			/* Free RX descriptors */ 
-			CPC_TTY_DBG("%s: frame size is invalid.\n",cpc_tty->name);
-			stats->rx_errors++; 
-			stats->rx_frame_errors++; 
-			cpc_tty_rx_disc_frame(pc300chan);
-			continue;
-		} 
-		
-		new = kmalloc(rx_len + sizeof(st_cpc_rx_buf), GFP_ATOMIC);
-		if (!new) {
-			cpc_tty_rx_disc_frame(pc300chan);
-			continue;
-		}
-		
-		/* dma buf read */ 
-		ptdescr = (pcsca_bd_t __iomem *)(card->hw.rambase + 
-				RX_BD_ADDR(ch, pc300chan->rx_first_bd)); 
-
-		rx_len = 0;	/* counter frame size */
-		
-		while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) {
-			rx_aux = cpc_readw(&ptdescr->len);
-			if ((status & (DST_OVR | DST_CRC | DST_RBIT |  DST_SHRT | DST_ABT))
-				|| (rx_aux > BD_DEF_LEN)) {
-				CPC_TTY_DBG("%s: reception error\n", cpc_tty->name);
-				stats->rx_errors++; 
-				if (status & DST_OVR) { 
-					stats->rx_fifo_errors++; 
-				}
-				if (status & DST_CRC) { 
-					stats->rx_crc_errors++; 
-				}
-				if ((status & (DST_RBIT | DST_SHRT | DST_ABT)) ||
-					(rx_aux > BD_DEF_LEN))	{ 
-					stats->rx_frame_errors++; 
-				} 
-				/* discard remainig descriptors used by the bad frame */ 
-				CPC_TTY_DBG("%s: reception error - discard descriptors",
-						cpc_tty->name);
-				cpc_tty_rx_disc_frame(pc300chan);
-				rx_len = 0;
-				kfree(new);
-				new = NULL;
-				break; /* read next frame - while(1) */
-			}
-
-			if (cpc_tty->state != CPC_TTY_ST_OPEN) {
-				/* Free RX descriptors */ 
-				cpc_tty_rx_disc_frame(pc300chan);
-				stats->rx_dropped++; 
-				rx_len = 0; 
-				kfree(new);
-				new = NULL;
-				break; /* read next frame - while(1) */
-			}
-
-			/* read the segment of the frame */
-			if (rx_aux != 0) {
-				memcpy_fromio((new->data + rx_len), 
-					(void __iomem *)(card->hw.rambase + 
-					 cpc_readl(&ptdescr->ptbuf)), rx_aux);
-				rx_len += rx_aux; 
-			}
-			cpc_writeb(&ptdescr->status,0); 
-			cpc_writeb(&ptdescr->len, 0); 
-			pc300chan->rx_first_bd = (pc300chan->rx_first_bd + 1) & 
-					(N_DMA_RX_BUF -1); 
-			if (status & DST_EOM)break;
-			
-			ptdescr = (pcsca_bd_t __iomem *) (card->hw.rambase + 
-					cpc_readl(&ptdescr->next)); 
-		}
-		/* update pointer */ 
-		pc300chan->rx_last_bd = (pc300chan->rx_first_bd - 1) & 
-					(N_DMA_RX_BUF - 1) ; 
-		if (!(dsr_rx & DSR_BOF)) {
-			/* update EDA */ 
-			cpc_writel(card->hw.scabase + DRX_REG(EDAL, ch), 
-					RX_BD_ADDR(ch, pc300chan->rx_last_bd)); 
-		}
-		if (rx_len != 0) { 
-			stats->rx_bytes += rx_len; 
-		
-			if (pc300dev->trace_on) { 
-				cpc_tty_trace(pc300dev, new->data,rx_len, 'R'); 
-			} 
-			new->size = rx_len;
-			new->next = NULL;
-			if (cpc_tty->buf_rx.first == NULL) {
-				cpc_tty->buf_rx.first = new;
-				cpc_tty->buf_rx.last = new;
-			} else {
-				cpc_tty->buf_rx.last->next = new;
-				cpc_tty->buf_rx.last = new;
-			}
-			schedule_work(&(cpc_tty->tty_rx_work));
-			stats->rx_packets++;
-		}
-	} 
-} 
-
-/*
- * PC300 TTY TX work routine
- * 
- * This routine treats TX interrupt. 
- * o if need call line discipline wakeup
- * o call wake_up_interruptible
- */
-static void cpc_tty_tx_work(struct work_struct *work)
-{
-	st_cpc_tty_area *cpc_tty =
-		container_of(work, st_cpc_tty_area, tty_tx_work);
-	struct tty_struct *tty; 
-
-	CPC_TTY_DBG("%s: cpc_tty_tx_work init\n",cpc_tty->name);
-	
-	if ((tty = cpc_tty->tty) == NULL) { 
-		CPC_TTY_DBG("%s: the interface is not opened\n",cpc_tty->name);
-		return; 
-	}
-	tty_wakeup(tty);
-}
-
-/*
- * PC300 TTY send to card routine
- * 
- * This routine send data to card. 
- * o clear descriptors
- * o write data to DMA buffers
- * o start the transmission
- */
-static int cpc_tty_send_to_card(pc300dev_t *dev,void* buf, int len)
-{
-	pc300ch_t *chan = (pc300ch_t *)dev->chan; 
-	pc300_t *card = (pc300_t *)chan->card; 
-	int ch = chan->channel; 
-	struct net_device_stats *stats = &dev->dev->stats;
-	unsigned long flags; 
-	volatile pcsca_bd_t __iomem *ptdescr; 
-	int i, nchar;
-	int tosend = len;
-	int nbuf = ((len - 1)/BD_DEF_LEN) + 1;
-	unsigned char *pdata=buf;
-
-	CPC_TTY_DBG("%s:cpc_tty_send_to_cars len=%i", 
-			(st_cpc_tty_area *)dev->cpc_tty->name,len);	
-
-	if (nbuf >= card->chan[ch].nfree_tx_bd) {
-		return 1;
-	}
-	
-	/* write buffer to DMA buffers */ 
-	CPC_TTY_DBG("%s: call dma_buf_write\n",
-			(st_cpc_tty_area *)dev->cpc_tty->name);	
-	for (i = 0 ; i < nbuf ; i++) {
-		ptdescr = (pcsca_bd_t __iomem *)(card->hw.rambase + 
-			TX_BD_ADDR(ch, card->chan[ch].tx_next_bd));
-		nchar = (BD_DEF_LEN > tosend) ? tosend : BD_DEF_LEN;
-		if (cpc_readb(&ptdescr->status) & DST_OSB) {
-			memcpy_toio((void __iomem *)(card->hw.rambase + 
-				cpc_readl(&ptdescr->ptbuf)), 
-				&pdata[len - tosend], 
-				nchar);
-			card->chan[ch].nfree_tx_bd--;
-			if ((i + 1) == nbuf) {
-				/* This must be the last BD to be used */
-				cpc_writeb(&ptdescr->status, DST_EOM);
-			} else {
-				cpc_writeb(&ptdescr->status, 0);
-			}
-			cpc_writew(&ptdescr->len, nchar);
-		} else {
-			CPC_TTY_DBG("%s: error in dma_buf_write\n",
-					(st_cpc_tty_area *)dev->cpc_tty->name);	
-			stats->tx_dropped++;
-			return 1; 
-		}
-		tosend -= nchar;
-		card->chan[ch].tx_next_bd = 
-			(card->chan[ch].tx_next_bd + 1) & (N_DMA_TX_BUF - 1);
-	}
-
-	if (dev->trace_on) { 
-		cpc_tty_trace(dev, buf, len,'T'); 
-	}
-
-	/* start transmission */ 
-	CPC_TTY_DBG("%s: start transmission\n",
-		(st_cpc_tty_area *)dev->cpc_tty->name);	
-	
-	CPC_TTY_LOCK(card, flags); 
-	cpc_writeb(card->hw.scabase + DTX_REG(EDAL, ch), 
-			TX_BD_ADDR(ch, chan->tx_next_bd)); 
-	cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_TX_ENA); 
-	cpc_writeb(card->hw.scabase + DSR_TX(ch), DSR_DE); 
-
-	if (card->hw.type == PC300_TE) { 
-		cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, 
-			cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) |
-			(CPLD_REG2_FALC_LED1 << (2 * ch))); 
-	}
-	CPC_TTY_UNLOCK(card, flags); 
-	return 0; 
-} 
-
-/*
- *	PC300 TTY trace routine
- *
- *  This routine send trace of connection to application. 
- *  o clear descriptors
- *  o write data to DMA buffers
- *  o start the transmission
- */
-
-static void cpc_tty_trace(pc300dev_t *dev, char* buf, int len, char rxtx)
-{
-	struct sk_buff *skb; 
-
-	if ((skb = dev_alloc_skb(10 + len)) == NULL) { 
-		/* out of memory */ 
-		CPC_TTY_DBG("%s: tty_trace - out of memory\n", dev->dev->name);
-		return; 
-	}
-
-	skb_put (skb, 10 + len); 
-	skb->dev = dev->dev; 
-	skb->protocol = htons(ETH_P_CUST); 
-	skb_reset_mac_header(skb);
-	skb->pkt_type = PACKET_HOST; 
-	skb->len = 10 + len; 
-
-	skb_copy_to_linear_data(skb, dev->dev->name, 5);
-	skb->data[5] = '['; 
-	skb->data[6] = rxtx; 
-	skb->data[7] = ']'; 
-	skb->data[8] = ':'; 
-	skb->data[9] = ' '; 
-	skb_copy_to_linear_data_offset(skb, 10, buf, len);
-	netif_rx(skb); 
-} 	
-
-/*
- *	PC300 TTY unregister service routine
- *
- *	This routine unregister one interface. 
- */
-void cpc_tty_unregister_service(pc300dev_t *pc300dev)
-{
-	st_cpc_tty_area *cpc_tty; 
-	ulong flags;
-	int res;
-
-	if ((cpc_tty= (st_cpc_tty_area *) pc300dev->cpc_tty) == NULL) {
-		CPC_TTY_DBG("%s: interface is not TTY\n", pc300dev->dev->name);
-		return; 
-	}
-	CPC_TTY_DBG("%s: cpc_tty_unregister_service", cpc_tty->name);
-
-	if (cpc_tty->pc300dev != pc300dev) { 
-		CPC_TTY_DBG("%s: invalid tty ptr=%s\n", 
-		pc300dev->dev->name, cpc_tty->name);
-		return; 
-	}
-
-	if (--cpc_tty_cnt == 0) { 
-		if (serial_drv.refcount) {
-			CPC_TTY_DBG("%s: unregister is not possible, refcount=%d",
-							cpc_tty->name, serial_drv.refcount);
-			cpc_tty_cnt++;
-			cpc_tty_unreg_flag = 1;
-			return;
-		} else { 
-			CPC_TTY_DBG("%s: unregister the tty driver\n", cpc_tty->name);
-			if ((res=tty_unregister_driver(&serial_drv))) { 
-				CPC_TTY_DBG("%s: ERROR ->unregister the tty driver error=%d\n",
-								cpc_tty->name,res);
-			}
-		}
-	}
-	CPC_TTY_LOCK(pc300dev->chan->card,flags);
-	cpc_tty->tty = NULL; 
-	CPC_TTY_UNLOCK(pc300dev->chan->card, flags);
-	cpc_tty->tty_minor = 0; 
-	cpc_tty->state = CPC_TTY_ST_IDLE; 
-} 
-
-/*
- * PC300 TTY trigger poll routine
- * This routine is called by pc300driver to treats Tx interrupt. 
- */
-void cpc_tty_trigger_poll(pc300dev_t *pc300dev)
-{
-	st_cpc_tty_area *cpc_tty = (st_cpc_tty_area *)pc300dev->cpc_tty; 
-	if (!cpc_tty) {
-		return;
-	}
-	schedule_work(&(cpc_tty->tty_tx_work)); 
-}