Merge tty-next into 3.6-rc1

This handles the merge issue in:
	arch/um/drivers/line.c
	arch/um/drivers/line.h
And resolves the duplicate patches that were in both trees do to the
tty-next branch not getting merged into 3.6-rc1.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

14 files changed, 1613 insertions, 883 deletions

diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 833e32f8d63b..c1ae76968f47 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -134,6 +134,7 @@ config USB_NET_AX8817X
 	tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
 	depends on USB_USBNET
 	select CRC32
+	select PHYLIB
 	default y
 	help
 	  This option adds support for ASIX AX88xxx based USB 2.0
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index a2e2d72c52a0..bf063008c1af 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_USB_PEGASUS)	+= pegasus.o
 obj-$(CONFIG_USB_RTL8150)	+= rtl8150.o
 obj-$(CONFIG_USB_HSO)		+= hso.o
 obj-$(CONFIG_USB_NET_AX8817X)	+= asix.o
+asix-y := asix_devices.o asix_common.o ax88172a.o
 obj-$(CONFIG_USB_NET_CDCETHER)	+= cdc_ether.o
 obj-$(CONFIG_USB_NET_CDC_EEM)	+= cdc_eem.o
 obj-$(CONFIG_USB_NET_DM9601)	+= dm9601.o
diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h
new file mode 100644
index 000000000000..e889631161b8
--- /dev/null
+++ b/drivers/net/usb/asix.h
@@ -0,0 +1,218 @@
+/*
+ * ASIX AX8817X based USB 2.0 Ethernet Devices
+ * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
+ * Copyright (c) 2002-2003 TiVo Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _ASIX_H
+#define _ASIX_H
+
+// #define	DEBUG			// error path messages, extra info
+// #define	VERBOSE			// more; success messages
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
+#include <linux/if_vlan.h>
+
+#define DRIVER_VERSION "22-Dec-2011"
+#define DRIVER_NAME "asix"
+
+/* ASIX AX8817X based USB 2.0 Ethernet Devices */
+
+#define AX_CMD_SET_SW_MII		0x06
+#define AX_CMD_READ_MII_REG		0x07
+#define AX_CMD_WRITE_MII_REG		0x08
+#define AX_CMD_SET_HW_MII		0x0a
+#define AX_CMD_READ_EEPROM		0x0b
+#define AX_CMD_WRITE_EEPROM		0x0c
+#define AX_CMD_WRITE_ENABLE		0x0d
+#define AX_CMD_WRITE_DISABLE		0x0e
+#define AX_CMD_READ_RX_CTL		0x0f
+#define AX_CMD_WRITE_RX_CTL		0x10
+#define AX_CMD_READ_IPG012		0x11
+#define AX_CMD_WRITE_IPG0		0x12
+#define AX_CMD_WRITE_IPG1		0x13
+#define AX_CMD_READ_NODE_ID		0x13
+#define AX_CMD_WRITE_NODE_ID		0x14
+#define AX_CMD_WRITE_IPG2		0x14
+#define AX_CMD_WRITE_MULTI_FILTER	0x16
+#define AX88172_CMD_READ_NODE_ID	0x17
+#define AX_CMD_READ_PHY_ID		0x19
+#define AX_CMD_READ_MEDIUM_STATUS	0x1a
+#define AX_CMD_WRITE_MEDIUM_MODE	0x1b
+#define AX_CMD_READ_MONITOR_MODE	0x1c
+#define AX_CMD_WRITE_MONITOR_MODE	0x1d
+#define AX_CMD_READ_GPIOS		0x1e
+#define AX_CMD_WRITE_GPIOS		0x1f
+#define AX_CMD_SW_RESET			0x20
+#define AX_CMD_SW_PHY_STATUS		0x21
+#define AX_CMD_SW_PHY_SELECT		0x22
+
+#define AX_PHY_SELECT_MASK		(BIT(3) | BIT(2))
+#define AX_PHY_SELECT_INTERNAL		0
+#define AX_PHY_SELECT_EXTERNAL		BIT(2)
+
+#define AX_MONITOR_MODE			0x01
+#define AX_MONITOR_LINK			0x02
+#define AX_MONITOR_MAGIC		0x04
+#define AX_MONITOR_HSFS			0x10
+
+/* AX88172 Medium Status Register values */
+#define AX88172_MEDIUM_FD		0x02
+#define AX88172_MEDIUM_TX		0x04
+#define AX88172_MEDIUM_FC		0x10
+#define AX88172_MEDIUM_DEFAULT \
+		( AX88172_MEDIUM_FD | AX88172_MEDIUM_TX | AX88172_MEDIUM_FC )
+
+#define AX_MCAST_FILTER_SIZE		8
+#define AX_MAX_MCAST			64
+
+#define AX_SWRESET_CLEAR		0x00
+#define AX_SWRESET_RR			0x01
+#define AX_SWRESET_RT			0x02
+#define AX_SWRESET_PRTE			0x04
+#define AX_SWRESET_PRL			0x08
+#define AX_SWRESET_BZ			0x10
+#define AX_SWRESET_IPRL			0x20
+#define AX_SWRESET_IPPD			0x40
+
+#define AX88772_IPG0_DEFAULT		0x15
+#define AX88772_IPG1_DEFAULT		0x0c
+#define AX88772_IPG2_DEFAULT		0x12
+
+/* AX88772 & AX88178 Medium Mode Register */
+#define AX_MEDIUM_PF		0x0080
+#define AX_MEDIUM_JFE		0x0040
+#define AX_MEDIUM_TFC		0x0020
+#define AX_MEDIUM_RFC		0x0010
+#define AX_MEDIUM_ENCK		0x0008
+#define AX_MEDIUM_AC		0x0004
+#define AX_MEDIUM_FD		0x0002
+#define AX_MEDIUM_GM		0x0001
+#define AX_MEDIUM_SM		0x1000
+#define AX_MEDIUM_SBP		0x0800
+#define AX_MEDIUM_PS		0x0200
+#define AX_MEDIUM_RE		0x0100
+
+#define AX88178_MEDIUM_DEFAULT	\
+	(AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \
+	 AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \
+	 AX_MEDIUM_RE)
+
+#define AX88772_MEDIUM_DEFAULT	\
+	(AX_MEDIUM_FD | AX_MEDIUM_RFC | \
+	 AX_MEDIUM_TFC | AX_MEDIUM_PS | \
+	 AX_MEDIUM_AC | AX_MEDIUM_RE)
+
+/* AX88772 & AX88178 RX_CTL values */
+#define AX_RX_CTL_SO		0x0080
+#define AX_RX_CTL_AP		0x0020
+#define AX_RX_CTL_AM		0x0010
+#define AX_RX_CTL_AB		0x0008
+#define AX_RX_CTL_SEP		0x0004
+#define AX_RX_CTL_AMALL		0x0002
+#define AX_RX_CTL_PRO		0x0001
+#define AX_RX_CTL_MFB_2048	0x0000
+#define AX_RX_CTL_MFB_4096	0x0100
+#define AX_RX_CTL_MFB_8192	0x0200
+#define AX_RX_CTL_MFB_16384	0x0300
+
+#define AX_DEFAULT_RX_CTL	(AX_RX_CTL_SO | AX_RX_CTL_AB)
+
+/* GPIO 0 .. 2 toggles */
+#define AX_GPIO_GPO0EN		0x01	/* GPIO0 Output enable */
+#define AX_GPIO_GPO_0		0x02	/* GPIO0 Output value */
+#define AX_GPIO_GPO1EN		0x04	/* GPIO1 Output enable */
+#define AX_GPIO_GPO_1		0x08	/* GPIO1 Output value */
+#define AX_GPIO_GPO2EN		0x10	/* GPIO2 Output enable */
+#define AX_GPIO_GPO_2		0x20	/* GPIO2 Output value */
+#define AX_GPIO_RESERVED	0x40	/* Reserved */
+#define AX_GPIO_RSE		0x80	/* Reload serial EEPROM */
+
+#define AX_EEPROM_MAGIC		0xdeadbeef
+#define AX_EEPROM_LEN		0x200
+
+/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
+struct asix_data {
+	u8 multi_filter[AX_MCAST_FILTER_SIZE];
+	u8 mac_addr[ETH_ALEN];
+	u8 phymode;
+	u8 ledmode;
+	u8 res;
+};
+
+int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+		  u16 size, void *data);
+
+int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+		   u16 size, void *data);
+
+void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value,
+			  u16 index, u16 size, void *data);
+
+int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb);
+
+struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+			      gfp_t flags);
+
+int asix_set_sw_mii(struct usbnet *dev);
+int asix_set_hw_mii(struct usbnet *dev);
+
+int asix_read_phy_addr(struct usbnet *dev, int internal);
+int asix_get_phy_addr(struct usbnet *dev);
+
+int asix_sw_reset(struct usbnet *dev, u8 flags);
+
+u16 asix_read_rx_ctl(struct usbnet *dev);
+int asix_write_rx_ctl(struct usbnet *dev, u16 mode);
+
+u16 asix_read_medium_status(struct usbnet *dev);
+int asix_write_medium_mode(struct usbnet *dev, u16 mode);
+
+int asix_write_gpio(struct usbnet *dev, u16 value, int sleep);
+
+void asix_set_multicast(struct net_device *net);
+
+int asix_mdio_read(struct net_device *netdev, int phy_id, int loc);
+void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val);
+
+void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);
+int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);
+
+int asix_get_eeprom_len(struct net_device *net);
+int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+		    u8 *data);
+int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+		    u8 *data);
+
+void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info);
+
+int asix_set_mac_address(struct net_device *net, void *p);
+
+#endif /* _ASIX_H */
diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
new file mode 100644
index 000000000000..774d9ce2dafc
--- /dev/null
+++ b/drivers/net/usb/asix_common.c
@@ -0,0 +1,631 @@
+/*
+ * ASIX AX8817X based USB 2.0 Ethernet Devices
+ * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
+ * Copyright (c) 2002-2003 TiVo Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include "asix.h"
+
+int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+		  u16 size, void *data)
+{
+	void *buf;
+	int err = -ENOMEM;
+
+	netdev_dbg(dev->net, "asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
+		   cmd, value, index, size);
+
+	buf = kmalloc(size, GFP_KERNEL);
+	if (!buf)
+		goto out;
+
+	err = usb_control_msg(
+		dev->udev,
+		usb_rcvctrlpipe(dev->udev, 0),
+		cmd,
+		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		value,
+		index,
+		buf,
+		size,
+		USB_CTRL_GET_TIMEOUT);
+	if (err == size)
+		memcpy(data, buf, size);
+	else if (err >= 0)
+		err = -EINVAL;
+	kfree(buf);
+
+out:
+	return err;
+}
+
+int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+		   u16 size, void *data)
+{
+	void *buf = NULL;
+	int err = -ENOMEM;
+
+	netdev_dbg(dev->net, "asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
+		   cmd, value, index, size);
+
+	if (data) {
+		buf = kmemdup(data, size, GFP_KERNEL);
+		if (!buf)
+			goto out;
+	}
+
+	err = usb_control_msg(
+		dev->udev,
+		usb_sndctrlpipe(dev->udev, 0),
+		cmd,
+		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		value,
+		index,
+		buf,
+		size,
+		USB_CTRL_SET_TIMEOUT);
+	kfree(buf);
+
+out:
+	return err;
+}
+
+static void asix_async_cmd_callback(struct urb *urb)
+{
+	struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
+	int status = urb->status;
+
+	if (status < 0)
+		printk(KERN_DEBUG "asix_async_cmd_callback() failed with %d",
+			status);
+
+	kfree(req);
+	usb_free_urb(urb);
+}
+
+void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			  u16 size, void *data)
+{
+	struct usb_ctrlrequest *req;
+	int status;
+	struct urb *urb;
+
+	netdev_dbg(dev->net, "asix_write_cmd_async() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
+		   cmd, value, index, size);
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb) {
+		netdev_err(dev->net, "Error allocating URB in write_cmd_async!\n");
+		return;
+	}
+
+	req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
+	if (!req) {
+		netdev_err(dev->net, "Failed to allocate memory for control request\n");
+		usb_free_urb(urb);
+		return;
+	}
+
+	req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
+	req->bRequest = cmd;
+	req->wValue = cpu_to_le16(value);
+	req->wIndex = cpu_to_le16(index);
+	req->wLength = cpu_to_le16(size);
+
+	usb_fill_control_urb(urb, dev->udev,
+			     usb_sndctrlpipe(dev->udev, 0),
+			     (void *)req, data, size,
+			     asix_async_cmd_callback, req);
+
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status < 0) {
+		netdev_err(dev->net, "Error submitting the control message: status=%d\n",
+			   status);
+		kfree(req);
+		usb_free_urb(urb);
+	}
+}
+
+int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	int offset = 0;
+
+	while (offset + sizeof(u32) < skb->len) {
+		struct sk_buff *ax_skb;
+		u16 size;
+		u32 header = get_unaligned_le32(skb->data + offset);
+
+		offset += sizeof(u32);
+
+		/* get the packet length */
+		size = (u16) (header & 0x7ff);
+		if (size != ((~header >> 16) & 0x07ff)) {
+			netdev_err(dev->net, "asix_rx_fixup() Bad Header Length\n");
+			return 0;
+		}
+
+		if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) ||
+		    (size + offset > skb->len)) {
+			netdev_err(dev->net, "asix_rx_fixup() Bad RX Length %d\n",
+				   size);
+			return 0;
+		}
+		ax_skb = netdev_alloc_skb_ip_align(dev->net, size);
+		if (!ax_skb)
+			return 0;
+
+		skb_put(ax_skb, size);
+		memcpy(ax_skb->data, skb->data + offset, size);
+		usbnet_skb_return(dev, ax_skb);
+
+		offset += (size + 1) & 0xfffe;
+	}
+
+	if (skb->len != offset) {
+		netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d\n",
+			   skb->len);
+		return 0;
+	}
+	return 1;
+}
+
+struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+			      gfp_t flags)
+{
+	int padlen;
+	int headroom = skb_headroom(skb);
+	int tailroom = skb_tailroom(skb);
+	u32 packet_len;
+	u32 padbytes = 0xffff0000;
+
+	padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4;
+
+	/* We need to push 4 bytes in front of frame (packet_len)
+	 * and maybe add 4 bytes after the end (if padlen is 4)
+	 *
+	 * Avoid skb_copy_expand() expensive call, using following rules :
+	 * - We are allowed to push 4 bytes in headroom if skb_header_cloned()
+	 *   is false (and if we have 4 bytes of headroom)
+	 * - We are allowed to put 4 bytes at tail if skb_cloned()
+	 *   is false (and if we have 4 bytes of tailroom)
+	 *
+	 * TCP packets for example are cloned, but skb_header_release()
+	 * was called in tcp stack, allowing us to use headroom for our needs.
+	 */
+	if (!skb_header_cloned(skb) &&
+	    !(padlen && skb_cloned(skb)) &&
+	    headroom + tailroom >= 4 + padlen) {
+		/* following should not happen, but better be safe */
+		if (headroom < 4 ||
+		    tailroom < padlen) {
+			skb->data = memmove(skb->head + 4, skb->data, skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+		}
+	} else {
+		struct sk_buff *skb2;
+
+		skb2 = skb_copy_expand(skb, 4, padlen, flags);
+		dev_kfree_skb_any(skb);
+		skb = skb2;
+		if (!skb)
+			return NULL;
+	}
+
+	packet_len = ((skb->len ^ 0x0000ffff) << 16) + skb->len;
+	skb_push(skb, 4);
+	cpu_to_le32s(&packet_len);
+	skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len));
+
+	if (padlen) {
+		cpu_to_le32s(&padbytes);
+		memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes));
+		skb_put(skb, sizeof(padbytes));
+	}
+	return skb;
+}
+
+int asix_set_sw_mii(struct usbnet *dev)
+{
+	int ret;
+	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to enable software MII access\n");
+	return ret;
+}
+
+int asix_set_hw_mii(struct usbnet *dev)
+{
+	int ret;
+	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to enable hardware MII access\n");
+	return ret;
+}
+
+int asix_read_phy_addr(struct usbnet *dev, int internal)
+{
+	int offset = (internal ? 1 : 0);
+	u8 buf[2];
+	int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf);
+
+	netdev_dbg(dev->net, "asix_get_phy_addr()\n");
+
+	if (ret < 0) {
+		netdev_err(dev->net, "Error reading PHYID register: %02x\n", ret);
+		goto out;
+	}
+	netdev_dbg(dev->net, "asix_get_phy_addr() returning 0x%04x\n",
+		   *((__le16 *)buf));
+	ret = buf[offset];
+
+out:
+	return ret;
+}
+
+int asix_get_phy_addr(struct usbnet *dev)
+{
+	/* return the address of the internal phy */
+	return asix_read_phy_addr(dev, 1);
+}
+
+
+int asix_sw_reset(struct usbnet *dev, u8 flags)
+{
+	int ret;
+
+        ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to send software reset: %02x\n", ret);
+
+	return ret;
+}
+
+u16 asix_read_rx_ctl(struct usbnet *dev)
+{
+	__le16 v;
+	int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v);
+
+	if (ret < 0) {
+		netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret);
+		goto out;
+	}
+	ret = le16_to_cpu(v);
+out:
+	return ret;
+}
+
+int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n",
+			   mode, ret);
+
+	return ret;
+}
+
+u16 asix_read_medium_status(struct usbnet *dev)
+{
+	__le16 v;
+	int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
+
+	if (ret < 0) {
+		netdev_err(dev->net, "Error reading Medium Status register: %02x\n",
+			   ret);
+		return ret;	/* TODO: callers not checking for error ret */
+	}
+
+	return le16_to_cpu(v);
+
+}
+
+int asix_write_medium_mode(struct usbnet *dev, u16 mode)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n",
+			   mode, ret);
+
+	return ret;
+}
+
+int asix_write_gpio(struct usbnet *dev, u16 value, int sleep)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n",
+			   value, ret);
+
+	if (sleep)
+		msleep(sleep);
+
+	return ret;
+}
+
+/*
+ * AX88772 & AX88178 have a 16-bit RX_CTL value
+ */
+void asix_set_multicast(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	u16 rx_ctl = AX_DEFAULT_RX_CTL;
+
+	if (net->flags & IFF_PROMISC) {
+		rx_ctl |= AX_RX_CTL_PRO;
+	} else if (net->flags & IFF_ALLMULTI ||
+		   netdev_mc_count(net) > AX_MAX_MCAST) {
+		rx_ctl |= AX_RX_CTL_AMALL;
+	} else if (netdev_mc_empty(net)) {
+		/* just broadcast and directed */
+	} else {
+		/* We use the 20 byte dev->data
+		 * for our 8 byte filter buffer
+		 * to avoid allocating memory that
+		 * is tricky to free later */
+		struct netdev_hw_addr *ha;
+		u32 crc_bits;
+
+		memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
+
+		/* Build the multicast hash filter. */
+		netdev_for_each_mc_addr(ha, net) {
+			crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			data->multi_filter[crc_bits >> 3] |=
+			    1 << (crc_bits & 7);
+		}
+
+		asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
+				   AX_MCAST_FILTER_SIZE, data->multi_filter);
+
+		rx_ctl |= AX_RX_CTL_AM;
+	}
+
+	asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+}
+
+int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res;
+
+	mutex_lock(&dev->phy_mutex);
+	asix_set_sw_mii(dev);
+	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
+				(__u16)loc, 2, &res);
+	asix_set_hw_mii(dev);
+	mutex_unlock(&dev->phy_mutex);
+
+	netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
+		   phy_id, loc, le16_to_cpu(res));
+
+	return le16_to_cpu(res);
+}
+
+void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res = cpu_to_le16(val);
+
+	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
+		   phy_id, loc, val);
+	mutex_lock(&dev->phy_mutex);
+	asix_set_sw_mii(dev);
+	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
+	asix_set_hw_mii(dev);
+	mutex_unlock(&dev->phy_mutex);
+}
+
+void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u8 opt;
+
+	if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
+		wolinfo->supported = 0;
+		wolinfo->wolopts = 0;
+		return;
+	}
+	wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
+	wolinfo->wolopts = 0;
+	if (opt & AX_MONITOR_LINK)
+		wolinfo->wolopts |= WAKE_PHY;
+	if (opt & AX_MONITOR_MAGIC)
+		wolinfo->wolopts |= WAKE_MAGIC;
+}
+
+int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u8 opt = 0;
+
+	if (wolinfo->wolopts & WAKE_PHY)
+		opt |= AX_MONITOR_LINK;
+	if (wolinfo->wolopts & WAKE_MAGIC)
+		opt |= AX_MONITOR_MAGIC;
+
+	if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
+			      opt, 0, 0, NULL) < 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+int asix_get_eeprom_len(struct net_device *net)
+{
+	return AX_EEPROM_LEN;
+}
+
+int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+		    u8 *data)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u16 *eeprom_buff;
+	int first_word, last_word;
+	int i;
+
+	if (eeprom->len == 0)
+		return -EINVAL;
+
+	eeprom->magic = AX_EEPROM_MAGIC;
+
+	first_word = eeprom->offset >> 1;
+	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+	eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1),
+			      GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	/* ax8817x returns 2 bytes from eeprom on read */
+	for (i = first_word; i <= last_word; i++) {
+		if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, i, 0, 2,
+				  &(eeprom_buff[i - first_word])) < 0) {
+			kfree(eeprom_buff);
+			return -EIO;
+		}
+	}
+
+	memcpy(data, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
+	kfree(eeprom_buff);
+	return 0;
+}
+
+int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+		    u8 *data)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u16 *eeprom_buff;
+	int first_word, last_word;
+	int i;
+	int ret;
+
+	netdev_dbg(net, "write EEPROM len %d, offset %d, magic 0x%x\n",
+		   eeprom->len, eeprom->offset, eeprom->magic);
+
+	if (eeprom->len == 0)
+		return -EINVAL;
+
+	if (eeprom->magic != AX_EEPROM_MAGIC)
+		return -EINVAL;
+
+	first_word = eeprom->offset >> 1;
+	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+	eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1),
+			      GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	/* align data to 16 bit boundaries, read the missing data from
+	   the EEPROM */
+	if (eeprom->offset & 1) {
+		ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, first_word, 0, 2,
+				    &(eeprom_buff[0]));
+		if (ret < 0) {
+			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word);
+			goto free;
+		}
+	}
+
+	if ((eeprom->offset + eeprom->len) & 1) {
+		ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, last_word, 0, 2,
+				    &(eeprom_buff[last_word - first_word]));
+		if (ret < 0) {
+			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word);
+			goto free;
+		}
+	}
+
+	memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len);
+
+	/* write data to EEPROM */
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL);
+	if (ret < 0) {
+		netdev_err(net, "Failed to enable EEPROM write\n");
+		goto free;
+	}
+	msleep(20);
+
+	for (i = first_word; i <= last_word; i++) {
+		netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n",
+			   i, eeprom_buff[i - first_word]);
+		ret = asix_write_cmd(dev, AX_CMD_WRITE_EEPROM, i,
+				     eeprom_buff[i - first_word], 0, NULL);
+		if (ret < 0) {
+			netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n",
+				   i);
+			goto free;
+		}
+		msleep(20);
+	}
+
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL);
+	if (ret < 0) {
+		netdev_err(net, "Failed to disable EEPROM write\n");
+		goto free;
+	}
+
+	ret = 0;
+free:
+	kfree(eeprom_buff);
+	return ret;
+}
+
+void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
+{
+	/* Inherit standard device info */
+	usbnet_get_drvinfo(net, info);
+	strncpy (info->driver, DRIVER_NAME, sizeof info->driver);
+	strncpy (info->version, DRIVER_VERSION, sizeof info->version);
+	info->eedump_len = AX_EEPROM_LEN;
+}
+
+int asix_set_mac_address(struct net_device *net, void *p)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	struct sockaddr *addr = p;
+
+	if (netif_running(net))
+		return -EBUSY;
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
+
+	/* We use the 20 byte dev->data
+	 * for our 6 byte mac buffer
+	 * to avoid allocating memory that
+	 * is tricky to free later */
+	memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
+	asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+							data->mac_addr);
+
+	return 0;
+}
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix_devices.c
index 3ae80eccd0ef..4fd48df6b989 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix_devices.c
@@ -20,137 +20,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-// #define	DEBUG			// error path messages, extra info
-// #define	VERBOSE			// more; success messages
-
-#include <linux/module.h>
-#include <linux/kmod.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/workqueue.h>
-#include <linux/mii.h>
-#include <linux/usb.h>
-#include <linux/crc32.h>
-#include <linux/usb/usbnet.h>
-#include <linux/slab.h>
-#include <linux/if_vlan.h>
-
-#define DRIVER_VERSION "22-Dec-2011"
-#define DRIVER_NAME "asix"
-
-/* ASIX AX8817X based USB 2.0 Ethernet Devices */
-
-#define AX_CMD_SET_SW_MII		0x06
-#define AX_CMD_READ_MII_REG		0x07
-#define AX_CMD_WRITE_MII_REG		0x08
-#define AX_CMD_SET_HW_MII		0x0a
-#define AX_CMD_READ_EEPROM		0x0b
-#define AX_CMD_WRITE_EEPROM		0x0c
-#define AX_CMD_WRITE_ENABLE		0x0d
-#define AX_CMD_WRITE_DISABLE		0x0e
-#define AX_CMD_READ_RX_CTL		0x0f
-#define AX_CMD_WRITE_RX_CTL		0x10
-#define AX_CMD_READ_IPG012		0x11
-#define AX_CMD_WRITE_IPG0		0x12
-#define AX_CMD_WRITE_IPG1		0x13
-#define AX_CMD_READ_NODE_ID		0x13
-#define AX_CMD_WRITE_NODE_ID		0x14
-#define AX_CMD_WRITE_IPG2		0x14
-#define AX_CMD_WRITE_MULTI_FILTER	0x16
-#define AX88172_CMD_READ_NODE_ID	0x17
-#define AX_CMD_READ_PHY_ID		0x19
-#define AX_CMD_READ_MEDIUM_STATUS	0x1a
-#define AX_CMD_WRITE_MEDIUM_MODE	0x1b
-#define AX_CMD_READ_MONITOR_MODE	0x1c
-#define AX_CMD_WRITE_MONITOR_MODE	0x1d
-#define AX_CMD_READ_GPIOS		0x1e
-#define AX_CMD_WRITE_GPIOS		0x1f
-#define AX_CMD_SW_RESET			0x20
-#define AX_CMD_SW_PHY_STATUS		0x21
-#define AX_CMD_SW_PHY_SELECT		0x22
-
-#define AX_MONITOR_MODE			0x01
-#define AX_MONITOR_LINK			0x02
-#define AX_MONITOR_MAGIC		0x04
-#define AX_MONITOR_HSFS			0x10
-
-/* AX88172 Medium Status Register values */
-#define AX88172_MEDIUM_FD		0x02
-#define AX88172_MEDIUM_TX		0x04
-#define AX88172_MEDIUM_FC		0x10
-#define AX88172_MEDIUM_DEFAULT \
-		( AX88172_MEDIUM_FD | AX88172_MEDIUM_TX | AX88172_MEDIUM_FC )
-
-#define AX_MCAST_FILTER_SIZE		8
-#define AX_MAX_MCAST			64
-
-#define AX_SWRESET_CLEAR		0x00
-#define AX_SWRESET_RR			0x01
-#define AX_SWRESET_RT			0x02
-#define AX_SWRESET_PRTE			0x04
-#define AX_SWRESET_PRL			0x08
-#define AX_SWRESET_BZ			0x10
-#define AX_SWRESET_IPRL			0x20
-#define AX_SWRESET_IPPD			0x40
-
-#define AX88772_IPG0_DEFAULT		0x15
-#define AX88772_IPG1_DEFAULT		0x0c
-#define AX88772_IPG2_DEFAULT		0x12
-
-/* AX88772 & AX88178 Medium Mode Register */
-#define AX_MEDIUM_PF		0x0080
-#define AX_MEDIUM_JFE		0x0040
-#define AX_MEDIUM_TFC		0x0020
-#define AX_MEDIUM_RFC		0x0010
-#define AX_MEDIUM_ENCK		0x0008
-#define AX_MEDIUM_AC		0x0004
-#define AX_MEDIUM_FD		0x0002
-#define AX_MEDIUM_GM		0x0001
-#define AX_MEDIUM_SM		0x1000
-#define AX_MEDIUM_SBP		0x0800
-#define AX_MEDIUM_PS		0x0200
-#define AX_MEDIUM_RE		0x0100
-
-#define AX88178_MEDIUM_DEFAULT	\
-	(AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \
-	 AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \
-	 AX_MEDIUM_RE)
-
-#define AX88772_MEDIUM_DEFAULT	\
-	(AX_MEDIUM_FD | AX_MEDIUM_RFC | \
-	 AX_MEDIUM_TFC | AX_MEDIUM_PS | \
-	 AX_MEDIUM_AC | AX_MEDIUM_RE)
-
-/* AX88772 & AX88178 RX_CTL values */
-#define AX_RX_CTL_SO		0x0080
-#define AX_RX_CTL_AP		0x0020
-#define AX_RX_CTL_AM		0x0010
-#define AX_RX_CTL_AB		0x0008
-#define AX_RX_CTL_SEP		0x0004
-#define AX_RX_CTL_AMALL		0x0002
-#define AX_RX_CTL_PRO		0x0001
-#define AX_RX_CTL_MFB_2048	0x0000
-#define AX_RX_CTL_MFB_4096	0x0100
-#define AX_RX_CTL_MFB_8192	0x0200
-#define AX_RX_CTL_MFB_16384	0x0300
-
-#define AX_DEFAULT_RX_CTL	(AX_RX_CTL_SO | AX_RX_CTL_AB)
-
-/* GPIO 0 .. 2 toggles */
-#define AX_GPIO_GPO0EN		0x01	/* GPIO0 Output enable */
-#define AX_GPIO_GPO_0		0x02	/* GPIO0 Output value */
-#define AX_GPIO_GPO1EN		0x04	/* GPIO1 Output enable */
-#define AX_GPIO_GPO_1		0x08	/* GPIO1 Output value */
-#define AX_GPIO_GPO2EN		0x10	/* GPIO2 Output enable */
-#define AX_GPIO_GPO_2		0x20	/* GPIO2 Output value */
-#define AX_GPIO_RESERVED	0x40	/* Reserved */
-#define AX_GPIO_RSE		0x80	/* Reload serial EEPROM */
-
-#define AX_EEPROM_MAGIC		0xdeadbeef
-#define AX88172_EEPROM_LEN	0x40
-#define AX88772_EEPROM_LEN	0xff
+#include "asix.h"
 
 #define PHY_MODE_MARVELL	0x0000
 #define MII_MARVELL_LED_CTRL	0x0018
@@ -166,15 +36,6 @@
 
 #define	PHY_MODE_RTL8211CL	0x000C
 
-/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
-struct asix_data {
-	u8 multi_filter[AX_MCAST_FILTER_SIZE];
-	u8 mac_addr[ETH_ALEN];
-	u8 phymode;
-	u8 ledmode;
-	u8 eeprom_len;
-};
-
 struct ax88172_int_data {
 	__le16 res1;
 	u8 link;
@@ -183,209 +44,6 @@ struct ax88172_int_data {
 	__le16 res3;
 } __packed;
 
-static int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-			    u16 size, void *data)
-{
-	void *buf;
-	int err = -ENOMEM;
-
-	netdev_dbg(dev->net, "asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
-		   cmd, value, index, size);
-
-	buf = kmalloc(size, GFP_KERNEL);
-	if (!buf)
-		goto out;
-
-	err = usb_control_msg(
-		dev->udev,
-		usb_rcvctrlpipe(dev->udev, 0),
-		cmd,
-		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-		value,
-		index,
-		buf,
-		size,
-		USB_CTRL_GET_TIMEOUT);
-	if (err == size)
-		memcpy(data, buf, size);
-	else if (err >= 0)
-		err = -EINVAL;
-	kfree(buf);
-
-out:
-	return err;
-}
-
-static int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-			     u16 size, void *data)
-{
-	void *buf = NULL;
-	int err = -ENOMEM;
-
-	netdev_dbg(dev->net, "asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
-		   cmd, value, index, size);
-
-	if (data) {
-		buf = kmemdup(data, size, GFP_KERNEL);
-		if (!buf)
-			goto out;
-	}
-
-	err = usb_control_msg(
-		dev->udev,
-		usb_sndctrlpipe(dev->udev, 0),
-		cmd,
-		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-		value,
-		index,
-		buf,
-		size,
-		USB_CTRL_SET_TIMEOUT);
-	kfree(buf);
-
-out:
-	return err;
-}
-
-static void asix_async_cmd_callback(struct urb *urb)
-{
-	struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
-	int status = urb->status;
-
-	if (status < 0)
-		printk(KERN_DEBUG "asix_async_cmd_callback() failed with %d",
-			status);
-
-	kfree(req);
-	usb_free_urb(urb);
-}
-
-static void
-asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-				    u16 size, void *data)
-{
-	struct usb_ctrlrequest *req;
-	int status;
-	struct urb *urb;
-
-	netdev_dbg(dev->net, "asix_write_cmd_async() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
-		   cmd, value, index, size);
-
-	urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!urb) {
-		netdev_err(dev->net, "Error allocating URB in write_cmd_async!\n");
-		return;
-	}
-
-	req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
-	if (!req) {
-		netdev_err(dev->net, "Failed to allocate memory for control request\n");
-		usb_free_urb(urb);
-		return;
-	}
-
-	req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
-	req->bRequest = cmd;
-	req->wValue = cpu_to_le16(value);
-	req->wIndex = cpu_to_le16(index);
-	req->wLength = cpu_to_le16(size);
-
-	usb_fill_control_urb(urb, dev->udev,
-			     usb_sndctrlpipe(dev->udev, 0),
-			     (void *)req, data, size,
-			     asix_async_cmd_callback, req);
-
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-	if (status < 0) {
-		netdev_err(dev->net, "Error submitting the control message: status=%d\n",
-			   status);
-		kfree(req);
-		usb_free_urb(urb);
-	}
-}
-
-static int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
-{
-	int offset = 0;
-
-	while (offset + sizeof(u32) < skb->len) {
-		struct sk_buff *ax_skb;
-		u16 size;
-		u32 header = get_unaligned_le32(skb->data + offset);
-
-		offset += sizeof(u32);
-
-		/* get the packet length */
-		size = (u16) (header & 0x7ff);
-		if (size != ((~header >> 16) & 0x07ff)) {
-			netdev_err(dev->net, "asix_rx_fixup() Bad Header Length\n");
-			return 0;
-		}
-
-		if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) ||
-		    (size + offset > skb->len)) {
-			netdev_err(dev->net, "asix_rx_fixup() Bad RX Length %d\n",
-				   size);
-			return 0;
-		}
-		ax_skb = netdev_alloc_skb_ip_align(dev->net, size);
-		if (!ax_skb)
-			return 0;
-
-		skb_put(ax_skb, size);
-		memcpy(ax_skb->data, skb->data + offset, size);
-		usbnet_skb_return(dev, ax_skb);
-
-		offset += (size + 1) & 0xfffe;
-	}
-
-	if (skb->len != offset) {
-		netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d\n",
-			   skb->len);
-		return 0;
-	}
-	return 1;
-}
-
-static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
-					gfp_t flags)
-{
-	int padlen;
-	int headroom = skb_headroom(skb);
-	int tailroom = skb_tailroom(skb);
-	u32 packet_len;
-	u32 padbytes = 0xffff0000;
-
-	padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4;
-
-	if ((!skb_cloned(skb)) &&
-	    ((headroom + tailroom) >= (4 + padlen))) {
-		if ((headroom < 4) || (tailroom < padlen)) {
-			skb->data = memmove(skb->head + 4, skb->data, skb->len);
-			skb_set_tail_pointer(skb, skb->len);
-		}
-	} else {
-		struct sk_buff *skb2;
-		skb2 = skb_copy_expand(skb, 4, padlen, flags);
-		dev_kfree_skb_any(skb);
-		skb = skb2;
-		if (!skb)
-			return NULL;
-	}
-
-	skb_push(skb, 4);
-	packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
-	cpu_to_le32s(&packet_len);
-	skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len));
-
-	if (padlen) {
-		cpu_to_le32s(&padbytes);
-		memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes));
-		skb_put(skb, sizeof(padbytes));
-	}
-	return skb;
-}
-
 static void asix_status(struct usbnet *dev, struct urb *urb)
 {
 	struct ax88172_int_data *event;
@@ -406,200 +64,6 @@ static void asix_status(struct usbnet *dev, struct urb *urb)
 	}
 }
 
-static inline int asix_set_sw_mii(struct usbnet *dev)
-{
-	int ret;
-	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
-	if (ret < 0)
-		netdev_err(dev->net, "Failed to enable software MII access\n");
-	return ret;
-}
-
-static inline int asix_set_hw_mii(struct usbnet *dev)
-{
-	int ret;
-	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
-	if (ret < 0)
-		netdev_err(dev->net, "Failed to enable hardware MII access\n");
-	return ret;
-}
-
-static inline int asix_get_phy_addr(struct usbnet *dev)
-{
-	u8 buf[2];
-	int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf);
-
-	netdev_dbg(dev->net, "asix_get_phy_addr()\n");
-
-	if (ret < 0) {
-		netdev_err(dev->net, "Error reading PHYID register: %02x\n", ret);
-		goto out;
-	}
-	netdev_dbg(dev->net, "asix_get_phy_addr() returning 0x%04x\n",
-		   *((__le16 *)buf));
-	ret = buf[1];
-
-out:
-	return ret;
-}
-
-static int asix_sw_reset(struct usbnet *dev, u8 flags)
-{
-	int ret;
-
-        ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
-	if (ret < 0)
-		netdev_err(dev->net, "Failed to send software reset: %02x\n", ret);
-
-	return ret;
-}
-
-static u16 asix_read_rx_ctl(struct usbnet *dev)
-{
-	__le16 v;
-	int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v);
-
-	if (ret < 0) {
-		netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret);
-		goto out;
-	}
-	ret = le16_to_cpu(v);
-out:
-	return ret;
-}
-
-static int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
-{
-	int ret;
-
-	netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
-	if (ret < 0)
-		netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n",
-			   mode, ret);
-
-	return ret;
-}
-
-static u16 asix_read_medium_status(struct usbnet *dev)
-{
-	__le16 v;
-	int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
-
-	if (ret < 0) {
-		netdev_err(dev->net, "Error reading Medium Status register: %02x\n",
-			   ret);
-		return ret;	/* TODO: callers not checking for error ret */
-	}
-
-	return le16_to_cpu(v);
-
-}
-
-static int asix_write_medium_mode(struct usbnet *dev, u16 mode)
-{
-	int ret;
-
-	netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
-	if (ret < 0)
-		netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n",
-			   mode, ret);
-
-	return ret;
-}
-
-static int asix_write_gpio(struct usbnet *dev, u16 value, int sleep)
-{
-	int ret;
-
-	netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL);
-	if (ret < 0)
-		netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n",
-			   value, ret);
-
-	if (sleep)
-		msleep(sleep);
-
-	return ret;
-}
-
-/*
- * AX88772 & AX88178 have a 16-bit RX_CTL value
- */
-static void asix_set_multicast(struct net_device *net)
-{
-	struct usbnet *dev = netdev_priv(net);
-	struct asix_data *data = (struct asix_data *)&dev->data;
-	u16 rx_ctl = AX_DEFAULT_RX_CTL;
-
-	if (net->flags & IFF_PROMISC) {
-		rx_ctl |= AX_RX_CTL_PRO;
-	} else if (net->flags & IFF_ALLMULTI ||
-		   netdev_mc_count(net) > AX_MAX_MCAST) {
-		rx_ctl |= AX_RX_CTL_AMALL;
-	} else if (netdev_mc_empty(net)) {
-		/* just broadcast and directed */
-	} else {
-		/* We use the 20 byte dev->data
-		 * for our 8 byte filter buffer
-		 * to avoid allocating memory that
-		 * is tricky to free later */
-		struct netdev_hw_addr *ha;
-		u32 crc_bits;
-
-		memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
-
-		/* Build the multicast hash filter. */
-		netdev_for_each_mc_addr(ha, net) {
-			crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
-			data->multi_filter[crc_bits >> 3] |=
-			    1 << (crc_bits & 7);
-		}
-
-		asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
-				   AX_MCAST_FILTER_SIZE, data->multi_filter);
-
-		rx_ctl |= AX_RX_CTL_AM;
-	}
-
-	asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
-}
-
-static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
-{
-	struct usbnet *dev = netdev_priv(netdev);
-	__le16 res;
-
-	mutex_lock(&dev->phy_mutex);
-	asix_set_sw_mii(dev);
-	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
-				(__u16)loc, 2, &res);
-	asix_set_hw_mii(dev);
-	mutex_unlock(&dev->phy_mutex);
-
-	netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
-		   phy_id, loc, le16_to_cpu(res));
-
-	return le16_to_cpu(res);
-}
-
-static void
-asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
-{
-	struct usbnet *dev = netdev_priv(netdev);
-	__le16 res = cpu_to_le16(val);
-
-	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
-		   phy_id, loc, val);
-	mutex_lock(&dev->phy_mutex);
-	asix_set_sw_mii(dev);
-	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
-	asix_set_hw_mii(dev);
-	mutex_unlock(&dev->phy_mutex);
-}
-
 /* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
 static u32 asix_get_phyid(struct usbnet *dev)
 {
@@ -629,88 +93,6 @@ static u32 asix_get_phyid(struct usbnet *dev)
 	return phy_id;
 }
 
-static void
-asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
-{
-	struct usbnet *dev = netdev_priv(net);
-	u8 opt;
-
-	if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
-		wolinfo->supported = 0;
-		wolinfo->wolopts = 0;
-		return;
-	}
-	wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
-	wolinfo->wolopts = 0;
-	if (opt & AX_MONITOR_LINK)
-		wolinfo->wolopts |= WAKE_PHY;
-	if (opt & AX_MONITOR_MAGIC)
-		wolinfo->wolopts |= WAKE_MAGIC;
-}
-
-static int
-asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
-{
-	struct usbnet *dev = netdev_priv(net);
-	u8 opt = 0;
-
-	if (wolinfo->wolopts & WAKE_PHY)
-		opt |= AX_MONITOR_LINK;
-	if (wolinfo->wolopts & WAKE_MAGIC)
-		opt |= AX_MONITOR_MAGIC;
-
-	if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
-			      opt, 0, 0, NULL) < 0)
-		return -EINVAL;
-
-	return 0;
-}
-
-static int asix_get_eeprom_len(struct net_device *net)
-{
-	struct usbnet *dev = netdev_priv(net);
-	struct asix_data *data = (struct asix_data *)&dev->data;
-
-	return data->eeprom_len;
-}
-
-static int asix_get_eeprom(struct net_device *net,
-			      struct ethtool_eeprom *eeprom, u8 *data)
-{
-	struct usbnet *dev = netdev_priv(net);
-	__le16 *ebuf = (__le16 *)data;
-	int i;
-
-	/* Crude hack to ensure that we don't overwrite memory
-	 * if an odd length is supplied
-	 */
-	if (eeprom->len % 2)
-		return -EINVAL;
-
-	eeprom->magic = AX_EEPROM_MAGIC;
-
-	/* ax8817x returns 2 bytes from eeprom on read */
-	for (i=0; i < eeprom->len / 2; i++) {
-		if (asix_read_cmd(dev, AX_CMD_READ_EEPROM,
-			eeprom->offset + i, 0, 2, &ebuf[i]) < 0)
-			return -EINVAL;
-	}
-	return 0;
-}
-
-static void asix_get_drvinfo (struct net_device *net,
-				 struct ethtool_drvinfo *info)
-{
-	struct usbnet *dev = netdev_priv(net);
-	struct asix_data *data = (struct asix_data *)&dev->data;
-
-	/* Inherit standard device info */
-	usbnet_get_drvinfo(net, info);
-	strncpy (info->driver, DRIVER_NAME, sizeof info->driver);
-	strncpy (info->version, DRIVER_VERSION, sizeof info->version);
-	info->eedump_len = data->eeprom_len;
-}
-
 static u32 asix_get_link(struct net_device *net)
 {
 	struct usbnet *dev = netdev_priv(net);
@@ -725,30 +107,6 @@ static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
 	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
 }
 
-static int asix_set_mac_address(struct net_device *net, void *p)
-{
-	struct usbnet *dev = netdev_priv(net);
-	struct asix_data *data = (struct asix_data *)&dev->data;
-	struct sockaddr *addr = p;
-
-	if (netif_running(net))
-		return -EBUSY;
-	if (!is_valid_ether_addr(addr->sa_data))
-		return -EADDRNOTAVAIL;
-
-	memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
-
-	/* We use the 20 byte dev->data
-	 * for our 6 byte mac buffer
-	 * to avoid allocating memory that
-	 * is tricky to free later */
-	memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
-	asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
-							data->mac_addr);
-
-	return 0;
-}
-
 /* We need to override some ethtool_ops so we require our
    own structure so we don't interfere with other usbnet
    devices that may be connected at the same time. */
@@ -761,6 +119,7 @@ static const struct ethtool_ops ax88172_ethtool_ops = {
 	.set_wol		= asix_set_wol,
 	.get_eeprom_len		= asix_get_eeprom_len,
 	.get_eeprom		= asix_get_eeprom,
+	.set_eeprom		= asix_set_eeprom,
 	.get_settings		= usbnet_get_settings,
 	.set_settings		= usbnet_set_settings,
 	.nway_reset		= usbnet_nway_reset,
@@ -843,9 +202,6 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 	u8 buf[ETH_ALEN];
 	int i;
 	unsigned long gpio_bits = dev->driver_info->data;
-	struct asix_data *data = (struct asix_data *)&dev->data;
-
-	data->eeprom_len = AX88172_EEPROM_LEN;
 
 	usbnet_get_endpoints(dev,intf);
 
@@ -880,6 +236,8 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 
 	dev->net->netdev_ops = &ax88172_netdev_ops;
 	dev->net->ethtool_ops = &ax88172_ethtool_ops;
+	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
+	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
 
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
@@ -901,6 +259,7 @@ static const struct ethtool_ops ax88772_ethtool_ops = {
 	.set_wol		= asix_set_wol,
 	.get_eeprom_len		= asix_get_eeprom_len,
 	.get_eeprom		= asix_get_eeprom,
+	.set_eeprom		= asix_set_eeprom,
 	.get_settings		= usbnet_get_settings,
 	.set_settings		= usbnet_set_settings,
 	.nway_reset		= usbnet_nway_reset,
@@ -1049,12 +408,9 @@ static const struct net_device_ops ax88772_netdev_ops = {
 static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int ret, embd_phy;
-	struct asix_data *data = (struct asix_data *)&dev->data;
 	u8 buf[ETH_ALEN];
 	u32 phyid;
 
-	data->eeprom_len = AX88772_EEPROM_LEN;
-
 	usbnet_get_endpoints(dev,intf);
 
 	/* Get the MAC address */
@@ -1075,6 +431,8 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 
 	dev->net->netdev_ops = &ax88772_netdev_ops;
 	dev->net->ethtool_ops = &ax88772_ethtool_ops;
+	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
+	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
 
 	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
 
@@ -1122,6 +480,7 @@ static const struct ethtool_ops ax88178_ethtool_ops = {
 	.set_wol		= asix_set_wol,
 	.get_eeprom_len		= asix_get_eeprom_len,
 	.get_eeprom		= asix_get_eeprom,
+	.set_eeprom		= asix_set_eeprom,
 	.get_settings		= usbnet_get_settings,
 	.set_settings		= usbnet_set_settings,
 	.nway_reset		= usbnet_nway_reset,
@@ -1405,9 +764,6 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int ret;
 	u8 buf[ETH_ALEN];
-	struct asix_data *data = (struct asix_data *)&dev->data;
-
-	data->eeprom_len = AX88772_EEPROM_LEN;
 
 	usbnet_get_endpoints(dev,intf);
 
@@ -1510,6 +866,8 @@ static const struct driver_info ax88178_info = {
 	.tx_fixup = asix_tx_fixup,
 };
 
+extern const struct driver_info ax88172a_info;
+
 static const struct usb_device_id	products [] = {
 {
 	// Linksys USB200M
@@ -1635,6 +993,10 @@ static const struct usb_device_id	products [] = {
 	// Asus USB Ethernet Adapter
 	USB_DEVICE (0x0b95, 0x7e2b),
 	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	/* ASIX 88172a demo board */
+	USB_DEVICE(0x0b95, 0x172a),
+	.driver_info = (unsigned long) &ax88172a_info,
 },
 	{ },		// END
 };
diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c
new file mode 100644
index 000000000000..c8e0aa85fb8e
--- /dev/null
+++ b/drivers/net/usb/ax88172a.c
@@ -0,0 +1,414 @@
+/*
+ * ASIX AX88172A based USB 2.0 Ethernet Devices
+ * Copyright (C) 2012 OMICRON electronics GmbH
+ *
+ * Supports external PHYs via phylib. Based on the driver for the
+ * AX88772. Original copyrights follow:
+ *
+ * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
+ * Copyright (c) 2002-2003 TiVo Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include "asix.h"
+#include <linux/phy.h>
+
+struct ax88172a_private {
+	struct mii_bus *mdio;
+	struct phy_device *phydev;
+	char phy_name[20];
+	u16 phy_addr;
+	u16 oldmode;
+	int use_embdphy;
+};
+
+/* MDIO read and write wrappers for phylib */
+static int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum)
+{
+	return asix_mdio_read(((struct usbnet *)bus->priv)->net, phy_id,
+			      regnum);
+}
+
+static int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum,
+			       u16 val)
+{
+	asix_mdio_write(((struct usbnet *)bus->priv)->net, phy_id, regnum, val);
+	return 0;
+}
+
+static int ax88172a_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
+{
+	if (!netif_running(net))
+		return -EINVAL;
+
+	if (!net->phydev)
+		return -ENODEV;
+
+	return phy_mii_ioctl(net->phydev, rq, cmd);
+}
+
+/* set MAC link settings according to information from phylib */
+static void ax88172a_adjust_link(struct net_device *netdev)
+{
+	struct phy_device *phydev = netdev->phydev;
+	struct usbnet *dev = netdev_priv(netdev);
+	struct ax88172a_private *priv = dev->driver_priv;
+	u16 mode = 0;
+
+	if (phydev->link) {
+		mode = AX88772_MEDIUM_DEFAULT;
+
+		if (phydev->duplex == DUPLEX_HALF)
+			mode &= ~AX_MEDIUM_FD;
+
+		if (phydev->speed != SPEED_100)
+			mode &= ~AX_MEDIUM_PS;
+	}
+
+	if (mode != priv->oldmode) {
+		asix_write_medium_mode(dev, mode);
+		priv->oldmode = mode;
+		netdev_dbg(netdev, "speed %u duplex %d, setting mode to 0x%04x\n",
+			   phydev->speed, phydev->duplex, mode);
+		phy_print_status(phydev);
+	}
+}
+
+static void ax88172a_status(struct usbnet *dev, struct urb *urb)
+{
+	/* link changes are detected by polling the phy */
+}
+
+/* use phylib infrastructure */
+static int ax88172a_init_mdio(struct usbnet *dev)
+{
+	struct ax88172a_private *priv = dev->driver_priv;
+	int ret, i;
+
+	priv->mdio = mdiobus_alloc();
+	if (!priv->mdio) {
+		netdev_err(dev->net, "Could not allocate MDIO bus\n");
+		return -ENOMEM;
+	}
+
+	priv->mdio->priv = (void *)dev;
+	priv->mdio->read = &asix_mdio_bus_read;
+	priv->mdio->write = &asix_mdio_bus_write;
+	priv->mdio->name = "Asix MDIO Bus";
+	/* mii bus name is usb-<usb bus number>-<usb device number> */
+	snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
+		 dev->udev->bus->busnum, dev->udev->devnum);
+
+	priv->mdio->irq = kzalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+	if (!priv->mdio->irq) {
+		netdev_err(dev->net, "Could not allocate mdio->irq\n");
+		ret = -ENOMEM;
+		goto mfree;
+	}
+	for (i = 0; i < PHY_MAX_ADDR; i++)
+		priv->mdio->irq[i] = PHY_POLL;
+
+	ret = mdiobus_register(priv->mdio);
+	if (ret) {
+		netdev_err(dev->net, "Could not register MDIO bus\n");
+		goto ifree;
+	}
+
+	netdev_info(dev->net, "registered mdio bus %s\n", priv->mdio->id);
+	return 0;
+
+ifree:
+	kfree(priv->mdio->irq);
+mfree:
+	mdiobus_free(priv->mdio);
+	return ret;
+}
+
+static void ax88172a_remove_mdio(struct usbnet *dev)
+{
+	struct ax88172a_private *priv = dev->driver_priv;
+
+	netdev_info(dev->net, "deregistering mdio bus %s\n", priv->mdio->id);
+	mdiobus_unregister(priv->mdio);
+	kfree(priv->mdio->irq);
+	mdiobus_free(priv->mdio);
+}
+
+static const struct net_device_ops ax88172a_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_set_mac_address	= asix_set_mac_address,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_do_ioctl		= ax88172a_ioctl,
+	.ndo_set_rx_mode        = asix_set_multicast,
+};
+
+int ax88172a_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
+{
+	if (!net->phydev)
+		return -ENODEV;
+
+	return phy_ethtool_gset(net->phydev, cmd);
+}
+
+int ax88172a_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
+{
+	if (!net->phydev)
+		return -ENODEV;
+
+	return phy_ethtool_sset(net->phydev, cmd);
+}
+
+int ax88172a_nway_reset(struct net_device *net)
+{
+	if (!net->phydev)
+		return -ENODEV;
+
+	return phy_start_aneg(net->phydev);
+}
+
+static const struct ethtool_ops ax88172a_ethtool_ops = {
+	.get_drvinfo		= asix_get_drvinfo,
+	.get_link		= usbnet_get_link,
+	.get_msglevel		= usbnet_get_msglevel,
+	.set_msglevel		= usbnet_set_msglevel,
+	.get_wol		= asix_get_wol,
+	.set_wol		= asix_set_wol,
+	.get_eeprom_len		= asix_get_eeprom_len,
+	.get_eeprom		= asix_get_eeprom,
+	.set_eeprom		= asix_set_eeprom,
+	.get_settings		= ax88172a_get_settings,
+	.set_settings		= ax88172a_set_settings,
+	.nway_reset		= ax88172a_nway_reset,
+};
+
+static int ax88172a_reset_phy(struct usbnet *dev, int embd_phy)
+{
+	int ret;
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPPD);
+	if (ret < 0)
+		goto err;
+
+	msleep(150);
+	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
+	if (ret < 0)
+		goto err;
+
+	msleep(150);
+
+	ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD);
+	if (ret < 0)
+		goto err;
+
+	return 0;
+
+err:
+	return ret;
+}
+
+
+static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int ret;
+	u8 buf[ETH_ALEN];
+	struct ax88172a_private *priv;
+
+	usbnet_get_endpoints(dev, intf);
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		netdev_err(dev->net, "Could not allocate memory for private data\n");
+		return -ENOMEM;
+	}
+	dev->driver_priv = priv;
+
+	/* Get the MAC address */
+	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	if (ret < 0) {
+		netdev_err(dev->net, "Failed to read MAC address: %d\n", ret);
+		goto free;
+	}
+	memcpy(dev->net->dev_addr, buf, ETH_ALEN);
+
+	dev->net->netdev_ops = &ax88172a_netdev_ops;
+	dev->net->ethtool_ops = &ax88172a_ethtool_ops;
+
+	/* are we using the internal or the external phy? */
+	ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf);
+	if (ret < 0) {
+		netdev_err(dev->net, "Failed to read software interface selection register: %d\n",
+			   ret);
+		goto free;
+	}
+
+	netdev_dbg(dev->net, "AX_CMD_SW_PHY_STATUS = 0x%02x\n", buf[0]);
+	switch (buf[0] & AX_PHY_SELECT_MASK) {
+	case AX_PHY_SELECT_INTERNAL:
+		netdev_dbg(dev->net, "use internal phy\n");
+		priv->use_embdphy = 1;
+		break;
+	case AX_PHY_SELECT_EXTERNAL:
+		netdev_dbg(dev->net, "use external phy\n");
+		priv->use_embdphy = 0;
+		break;
+	default:
+		netdev_err(dev->net, "Interface mode not supported by driver\n");
+		ret = -ENOTSUPP;
+		goto free;
+	}
+
+	priv->phy_addr = asix_read_phy_addr(dev, priv->use_embdphy);
+	ax88172a_reset_phy(dev, priv->use_embdphy);
+
+	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
+	if (dev->driver_info->flags & FLAG_FRAMING_AX) {
+		/* hard_mtu  is still the default - the device does not support
+		   jumbo eth frames */
+		dev->rx_urb_size = 2048;
+	}
+
+	/* init MDIO bus */
+	ret = ax88172a_init_mdio(dev);
+	if (ret)
+		goto free;
+
+	return 0;
+
+free:
+	kfree(priv);
+	return ret;
+}
+
+static int ax88172a_stop(struct usbnet *dev)
+{
+	struct ax88172a_private *priv = dev->driver_priv;
+
+	netdev_dbg(dev->net, "Stopping interface\n");
+
+	if (priv->phydev) {
+		netdev_info(dev->net, "Disconnecting from phy %s\n",
+			    priv->phy_name);
+		phy_stop(priv->phydev);
+		phy_disconnect(priv->phydev);
+	}
+
+	return 0;
+}
+
+static void ax88172a_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct ax88172a_private *priv = dev->driver_priv;
+
+	ax88172a_remove_mdio(dev);
+	kfree(priv);
+}
+
+static int ax88172a_reset(struct usbnet *dev)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	struct ax88172a_private *priv = dev->driver_priv;
+	int ret;
+	u16 rx_ctl;
+
+	ax88172a_reset_phy(dev, priv->use_embdphy);
+
+	msleep(150);
+	rx_ctl = asix_read_rx_ctl(dev);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
+	ret = asix_write_rx_ctl(dev, 0x0000);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = asix_read_rx_ctl(dev);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
+
+	msleep(150);
+
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
+			     AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
+			     AX88772_IPG2_DEFAULT, 0, NULL);
+	if (ret < 0) {
+		netdev_err(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
+		goto out;
+	}
+
+	/* Rewrite MAC address */
+	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+			     data->mac_addr);
+	if (ret < 0)
+		goto out;
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = asix_read_rx_ctl(dev);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	rx_ctl = asix_read_medium_status(dev);
+	netdev_dbg(dev->net, "Medium Status is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	/* Connect to PHY */
+	snprintf(priv->phy_name, 20, PHY_ID_FMT,
+		 priv->mdio->id, priv->phy_addr);
+
+	priv->phydev = phy_connect(dev->net, priv->phy_name,
+				   &ax88172a_adjust_link,
+				   0, PHY_INTERFACE_MODE_MII);
+	if (IS_ERR(priv->phydev)) {
+		netdev_err(dev->net, "Could not connect to PHY device %s\n",
+			   priv->phy_name);
+		ret = PTR_ERR(priv->phydev);
+		goto out;
+	}
+
+	netdev_info(dev->net, "Connected to phy %s\n", priv->phy_name);
+
+	/* During power-up, the AX88172A set the power down (BMCR_PDOWN)
+	 * bit of the PHY. Bring the PHY up again.
+	 */
+	genphy_resume(priv->phydev);
+	phy_start(priv->phydev);
+
+	return 0;
+
+out:
+	return ret;
+
+}
+
+const struct driver_info ax88172a_info = {
+	.description = "ASIX AX88172A USB 2.0 Ethernet",
+	.bind = ax88172a_bind,
+	.reset = ax88172a_reset,
+	.stop = ax88172a_stop,
+	.unbind = ax88172a_unbind,
+	.status = ax88172a_status,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
+		 FLAG_MULTI_PACKET,
+	.rx_fixup = asix_rx_fixup,
+	.tx_fixup = asix_tx_fixup,
+};
diff --git a/drivers/net/usb/cdc-phonet.c b/drivers/net/usb/cdc-phonet.c
index d848d4dd5754..64610048ce87 100644
--- a/drivers/net/usb/cdc-phonet.c
+++ b/drivers/net/usb/cdc-phonet.c
@@ -130,7 +130,7 @@ static int rx_submit(struct usbpn_dev *pnd, struct urb *req, gfp_t gfp_flags)
 	struct page *page;
 	int err;
 
-	page = alloc_page(gfp_flags);
+	page = __skb_alloc_page(gfp_flags | __GFP_NOMEMALLOC, NULL);
 	if (!page)
 		return -ENOMEM;
 
@@ -394,7 +394,7 @@ int usbpn_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	SET_NETDEV_DEV(dev, &intf->dev);
 
 	pnd->dev = dev;
-	pnd->usb = usb_get_dev(usbdev);
+	pnd->usb = usbdev;
 	pnd->intf = intf;
 	pnd->data_intf = data_intf;
 	spin_lock_init(&pnd->tx_lock);
@@ -440,7 +440,6 @@ out:
 static void usbpn_disconnect(struct usb_interface *intf)
 {
 	struct usbpn_dev *pnd = usb_get_intfdata(intf);
-	struct usb_device *usb = pnd->usb;
 
 	if (pnd->disconnected)
 		return;
@@ -449,7 +448,6 @@ static void usbpn_disconnect(struct usb_interface *intf)
 	usb_driver_release_interface(&usbpn_driver,
 			(pnd->intf == intf) ? pnd->data_intf : pnd->intf);
 	unregister_netdev(pnd->dev);
-	usb_put_dev(usb);
 }
 
 static struct usb_driver usbpn_driver = {
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index 4b9513fcf275..f4ce5957df32 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -138,20 +138,7 @@ struct cdc_ncm_ctx {
 static void cdc_ncm_txpath_bh(unsigned long param);
 static void cdc_ncm_tx_timeout_start(struct cdc_ncm_ctx *ctx);
 static enum hrtimer_restart cdc_ncm_tx_timer_cb(struct hrtimer *hr_timer);
-static const struct driver_info cdc_ncm_info;
 static struct usb_driver cdc_ncm_driver;
-static const struct ethtool_ops cdc_ncm_ethtool_ops;
-
-static const struct usb_device_id cdc_devs[] = {
-	{ USB_INTERFACE_INFO(USB_CLASS_COMM,
-		USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE),
-		.driver_info = (unsigned long)&cdc_ncm_info,
-	},
-	{
-	},
-};
-
-MODULE_DEVICE_TABLE(usb, cdc_devs);
 
 static void
 cdc_ncm_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
@@ -454,6 +441,16 @@ static void cdc_ncm_free(struct cdc_ncm_ctx *ctx)
 	kfree(ctx);
 }
 
+static const struct ethtool_ops cdc_ncm_ethtool_ops = {
+	.get_drvinfo = cdc_ncm_get_drvinfo,
+	.get_link = usbnet_get_link,
+	.get_msglevel = usbnet_get_msglevel,
+	.set_msglevel = usbnet_set_msglevel,
+	.get_settings = usbnet_get_settings,
+	.set_settings = usbnet_set_settings,
+	.nway_reset = usbnet_nway_reset,
+};
+
 static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	struct cdc_ncm_ctx *ctx;
@@ -1203,6 +1200,41 @@ static const struct driver_info cdc_ncm_info = {
 	.tx_fixup = cdc_ncm_tx_fixup,
 };
 
+/* Same as cdc_ncm_info, but with FLAG_WWAN */
+static const struct driver_info wwan_info = {
+	.description = "Mobile Broadband Network Device",
+	.flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET
+			| FLAG_WWAN,
+	.bind = cdc_ncm_bind,
+	.unbind = cdc_ncm_unbind,
+	.check_connect = cdc_ncm_check_connect,
+	.manage_power = cdc_ncm_manage_power,
+	.status = cdc_ncm_status,
+	.rx_fixup = cdc_ncm_rx_fixup,
+	.tx_fixup = cdc_ncm_tx_fixup,
+};
+
+static const struct usb_device_id cdc_devs[] = {
+	/* Ericsson MBM devices like F5521gw */
+	{ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+		| USB_DEVICE_ID_MATCH_VENDOR,
+	  .idVendor = 0x0bdb,
+	  .bInterfaceClass = USB_CLASS_COMM,
+	  .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM,
+	  .bInterfaceProtocol = USB_CDC_PROTO_NONE,
+	  .driver_info = (unsigned long) &wwan_info,
+	},
+
+	/* Generic CDC-NCM devices */
+	{ USB_INTERFACE_INFO(USB_CLASS_COMM,
+		USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE),
+		.driver_info = (unsigned long)&cdc_ncm_info,
+	},
+	{
+	},
+};
+MODULE_DEVICE_TABLE(usb, cdc_devs);
+
 static struct usb_driver cdc_ncm_driver = {
 	.name = "cdc_ncm",
 	.id_table = cdc_devs,
@@ -1215,16 +1247,6 @@ static struct usb_driver cdc_ncm_driver = {
 	.disable_hub_initiated_lpm = 1,
 };
 
-static const struct ethtool_ops cdc_ncm_ethtool_ops = {
-	.get_drvinfo = cdc_ncm_get_drvinfo,
-	.get_link = usbnet_get_link,
-	.get_msglevel = usbnet_get_msglevel,
-	.set_msglevel = usbnet_set_msglevel,
-	.get_settings = usbnet_get_settings,
-	.set_settings = usbnet_set_settings,
-	.nway_reset = usbnet_nway_reset,
-};
-
 module_usb_driver(cdc_ncm_driver);
 
 MODULE_AUTHOR("Hans Petter Selasky");
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index d8ad55284389..c3d03490c97d 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -1314,7 +1314,7 @@ static int kaweth_internal_control_msg(struct usb_device *usb_dev,
         int retv;
         int length = 0; /* shut up GCC */
 
-        urb = usb_alloc_urb(0, GFP_NOIO);
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
         if (!urb)
                 return -ENOMEM;
 
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index 7023220456c5..a0b5807b30d4 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -1329,8 +1329,6 @@ static int pegasus_probe(struct usb_interface *intf,
 	}
 	pegasus_count++;
 
-	usb_get_dev(dev);
-
 	net = alloc_etherdev(sizeof(struct pegasus));
 	if (!net)
 		goto out;
@@ -1407,7 +1405,6 @@ out2:
 out1:
 	free_netdev(net);
 out:
-	usb_put_dev(dev);
 	pegasus_dec_workqueue();
 	return res;
 }
@@ -1425,7 +1422,6 @@ static void pegasus_disconnect(struct usb_interface *intf)
 	pegasus->flags |= PEGASUS_UNPLUG;
 	cancel_delayed_work(&pegasus->carrier_check);
 	unregister_netdev(pegasus->net);
-	usb_put_dev(interface_to_usbdev(intf));
 	unlink_all_urbs(pegasus);
 	free_all_urbs(pegasus);
 	free_skb_pool(pegasus);
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index b01960fcfbc9..2ea126a16d79 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1,6 +1,10 @@
 /*
  * Copyright (c) 2012  Bjørn Mork <bjorn@mork.no>
  *
+ * The probing code is heavily inspired by cdc_ether, which is:
+ * Copyright (C) 2003-2005 by David Brownell
+ * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * version 2 as published by the Free Software Foundation.
@@ -15,11 +19,7 @@
 #include <linux/usb/usbnet.h>
 #include <linux/usb/cdc-wdm.h>
 
-/* The name of the CDC Device Management driver */
-#define DM_DRIVER "cdc_wdm"
-
-/*
- * This driver supports wwan (3G/LTE/?) devices using a vendor
+/* This driver supports wwan (3G/LTE/?) devices using a vendor
  * specific management protocol called Qualcomm MSM Interface (QMI) -
  * in addition to the more common AT commands over serial interface
  * management
@@ -31,59 +31,117 @@
  * management protocol is used in place of the standard CDC
  * notifications NOTIFY_NETWORK_CONNECTION and NOTIFY_SPEED_CHANGE
  *
+ * Alternatively, control and data functions can be combined in a
+ * single USB interface.
+ *
  * Handling a protocol like QMI is out of the scope for any driver.
- * It can be exported as a character device using the cdc-wdm driver,
- * which will enable userspace applications ("modem managers") to
- * handle it.  This may be required to use the network interface
- * provided by the driver.
+ * It is exported as a character device using the cdc-wdm driver as
+ * a subdriver, enabling userspace applications ("modem managers") to
+ * handle it.
  *
  * These devices may alternatively/additionally be configured using AT
- * commands on any of the serial interfaces driven by the option driver
- *
- * This driver binds only to the data ("slave") interface to enable
- * the cdc-wdm driver to bind to the control interface.  It still
- * parses the CDC functional descriptors on the control interface to
- *  a) verify that this is indeed a handled interface (CDC Union
- *     header lists it as slave)
- *  b) get MAC address and other ethernet config from the CDC Ethernet
- *     header
- *  c) enable user bind requests against the control interface, which
- *     is the common way to bind to CDC Ethernet Control Model type
- *     interfaces
- *  d) provide a hint to the user about which interface is the
- *     corresponding management interface
+ * commands on a serial interface
  */
 
+/* driver specific data */
+struct qmi_wwan_state {
+	struct usb_driver *subdriver;
+	atomic_t pmcount;
+	unsigned long unused;
+	struct usb_interface *control;
+	struct usb_interface *data;
+};
+
+/* using a counter to merge subdriver requests with our own into a combined state */
+static int qmi_wwan_manage_power(struct usbnet *dev, int on)
+{
+	struct qmi_wwan_state *info = (void *)&dev->data;
+	int rv = 0;
+
+	dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__, atomic_read(&info->pmcount), on);
+
+	if ((on && atomic_add_return(1, &info->pmcount) == 1) || (!on && atomic_dec_and_test(&info->pmcount))) {
+		/* need autopm_get/put here to ensure the usbcore sees the new value */
+		rv = usb_autopm_get_interface(dev->intf);
+		if (rv < 0)
+			goto err;
+		dev->intf->needs_remote_wakeup = on;
+		usb_autopm_put_interface(dev->intf);
+	}
+err:
+	return rv;
+}
+
+static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+
+	/* can be called while disconnecting */
+	if (!dev)
+		return 0;
+	return qmi_wwan_manage_power(dev, on);
+}
+
+/* collect all three endpoints and register subdriver */
+static int qmi_wwan_register_subdriver(struct usbnet *dev)
+{
+	int rv;
+	struct usb_driver *subdriver = NULL;
+	struct qmi_wwan_state *info = (void *)&dev->data;
+
+	/* collect bulk endpoints */
+	rv = usbnet_get_endpoints(dev, info->data);
+	if (rv < 0)
+		goto err;
+
+	/* update status endpoint if separate control interface */
+	if (info->control != info->data)
+		dev->status = &info->control->cur_altsetting->endpoint[0];
+
+	/* require interrupt endpoint for subdriver */
+	if (!dev->status) {
+		rv = -EINVAL;
+		goto err;
+	}
+
+	/* for subdriver power management */
+	atomic_set(&info->pmcount, 0);
+
+	/* register subdriver */
+	subdriver = usb_cdc_wdm_register(info->control, &dev->status->desc, 512, &qmi_wwan_cdc_wdm_manage_power);
+	if (IS_ERR(subdriver)) {
+		dev_err(&info->control->dev, "subdriver registration failed\n");
+		rv = PTR_ERR(subdriver);
+		goto err;
+	}
+
+	/* prevent usbnet from using status endpoint */
+	dev->status = NULL;
+
+	/* save subdriver struct for suspend/resume wrappers */
+	info->subdriver = subdriver;
+
+err:
+	return rv;
+}
+
 static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int status = -1;
-	struct usb_interface *control = NULL;
 	u8 *buf = intf->cur_altsetting->extra;
 	int len = intf->cur_altsetting->extralen;
 	struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc;
 	struct usb_cdc_union_desc *cdc_union = NULL;
 	struct usb_cdc_ether_desc *cdc_ether = NULL;
-	u32 required = 1 << USB_CDC_HEADER_TYPE | 1 << USB_CDC_UNION_TYPE;
 	u32 found = 0;
-	atomic_t *pmcount = (void *)&dev->data[1];
-
-	atomic_set(pmcount, 0);
+	struct usb_driver *driver = driver_of(intf);
+	struct qmi_wwan_state *info = (void *)&dev->data;
 
-	/*
-	 * assume a data interface has no additional descriptors and
-	 * that the control and data interface are numbered
-	 * consecutively - this holds for the Huawei device at least
-	 */
-	if (len == 0 && desc->bInterfaceNumber > 0) {
-		control = usb_ifnum_to_if(dev->udev, desc->bInterfaceNumber - 1);
-		if (!control)
-			goto err;
+	BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) < sizeof(struct qmi_wwan_state)));
 
-		buf = control->cur_altsetting->extra;
-		len = control->cur_altsetting->extralen;
-		dev_dbg(&intf->dev, "guessing \"control\" => %s, \"data\" => this\n",
-			dev_name(&control->dev));
-	}
+	/* require a single interrupt status endpoint for subdriver */
+	if (intf->cur_altsetting->desc.bNumEndpoints != 1)
+		goto err;
 
 	while (len > 3) {
 		struct usb_descriptor_header *h = (void *)buf;
@@ -142,15 +200,23 @@ next_desc:
 	}
 
 	/* did we find all the required ones? */
-	if ((found & required) != required) {
+	if (!(found & (1 << USB_CDC_HEADER_TYPE)) ||
+	    !(found & (1 << USB_CDC_UNION_TYPE))) {
 		dev_err(&intf->dev, "CDC functional descriptors missing\n");
 		goto err;
 	}
 
-	/* give the user a helpful hint if trying to bind to the wrong interface */
-	if (cdc_union && desc->bInterfaceNumber == cdc_union->bMasterInterface0) {
-		dev_err(&intf->dev, "leaving \"control\" interface for " DM_DRIVER " - try binding to %s instead!\n",
-			dev_name(&usb_ifnum_to_if(dev->udev, cdc_union->bSlaveInterface0)->dev));
+	/* verify CDC Union */
+	if (desc->bInterfaceNumber != cdc_union->bMasterInterface0) {
+		dev_err(&intf->dev, "bogus CDC Union: master=%u\n", cdc_union->bMasterInterface0);
+		goto err;
+	}
+
+	/* need to save these for unbind */
+	info->control = intf;
+	info->data = usb_ifnum_to_if(dev->udev,	cdc_union->bSlaveInterface0);
+	if (!info->data) {
+		dev_err(&intf->dev, "bogus CDC Union: slave=%u\n", cdc_union->bSlaveInterface0);
 		goto err;
 	}
 
@@ -160,63 +226,29 @@ next_desc:
 		usbnet_get_ethernet_addr(dev, cdc_ether->iMACAddress);
 	}
 
-	/* success! point the user to the management interface */
-	if (control)
-		dev_info(&intf->dev, "Use \"" DM_DRIVER "\" for QMI interface %s\n",
-			dev_name(&control->dev));
-
-	/* XXX: add a sysfs symlink somewhere to help management applications find it? */
+	/* claim data interface and set it up */
+	status = usb_driver_claim_interface(driver, info->data, dev);
+	if (status < 0)
+		goto err;
 
-	/* collect bulk endpoints now that we know intf == "data" interface */
-	status = usbnet_get_endpoints(dev, intf);
+	status = qmi_wwan_register_subdriver(dev);
+	if (status < 0) {
+		usb_set_intfdata(info->data, NULL);
+		usb_driver_release_interface(driver, info->data);
+	}
 
 err:
 	return status;
 }
 
-/* using a counter to merge subdriver requests with our own into a combined state */
-static int qmi_wwan_manage_power(struct usbnet *dev, int on)
-{
-	atomic_t *pmcount = (void *)&dev->data[1];
-	int rv = 0;
-
-	dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__, atomic_read(pmcount), on);
-
-	if ((on && atomic_add_return(1, pmcount) == 1) || (!on && atomic_dec_and_test(pmcount))) {
-		/* need autopm_get/put here to ensure the usbcore sees the new value */
-		rv = usb_autopm_get_interface(dev->intf);
-		if (rv < 0)
-			goto err;
-		dev->intf->needs_remote_wakeup = on;
-		usb_autopm_put_interface(dev->intf);
-	}
-err:
-	return rv;
-}
-
-static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on)
-{
-	struct usbnet *dev = usb_get_intfdata(intf);
-
-	/* can be called while disconnecting */
-	if (!dev)
-		return 0;
-	return qmi_wwan_manage_power(dev, on);
-}
-
 /* Some devices combine the "control" and "data" functions into a
  * single interface with all three endpoints: interrupt + bulk in and
  * out
- *
- * Setting up cdc-wdm as a subdriver owning the interrupt endpoint
- * will let it provide userspace access to the encapsulated QMI
- * protocol without interfering with the usbnet operations.
-  */
+ */
 static int qmi_wwan_bind_shared(struct usbnet *dev, struct usb_interface *intf)
 {
 	int rv;
-	struct usb_driver *subdriver = NULL;
-	atomic_t *pmcount = (void *)&dev->data[1];
+	struct qmi_wwan_state *info = (void *)&dev->data;
 
 	/* ZTE makes devices where the interface descriptors and endpoint
 	 * configurations of two or more interfaces are identical, even
@@ -232,43 +264,39 @@ static int qmi_wwan_bind_shared(struct usbnet *dev, struct usb_interface *intf)
 		goto err;
 	}
 
-	atomic_set(pmcount, 0);
-
-	/* collect all three endpoints */
-	rv = usbnet_get_endpoints(dev, intf);
-	if (rv < 0)
-		goto err;
-
-	/* require interrupt endpoint for subdriver */
-	if (!dev->status) {
-		rv = -EINVAL;
-		goto err;
-	}
-
-	subdriver = usb_cdc_wdm_register(intf, &dev->status->desc, 512, &qmi_wwan_cdc_wdm_manage_power);
-	if (IS_ERR(subdriver)) {
-		rv = PTR_ERR(subdriver);
-		goto err;
-	}
-
-	/* can't let usbnet use the interrupt endpoint */
-	dev->status = NULL;
-
-	/* save subdriver struct for suspend/resume wrappers */
-	dev->data[0] = (unsigned long)subdriver;
+	/*  control and data is shared */
+	info->control = intf;
+	info->data = intf;
+	rv = qmi_wwan_register_subdriver(dev);
 
 err:
 	return rv;
 }
 
-static void qmi_wwan_unbind_shared(struct usbnet *dev, struct usb_interface *intf)
+static void qmi_wwan_unbind(struct usbnet *dev, struct usb_interface *intf)
 {
-	struct usb_driver *subdriver = (void *)dev->data[0];
-
-	if (subdriver && subdriver->disconnect)
-		subdriver->disconnect(intf);
+	struct qmi_wwan_state *info = (void *)&dev->data;
+	struct usb_driver *driver = driver_of(intf);
+	struct usb_interface *other;
+
+	if (info->subdriver && info->subdriver->disconnect)
+		info->subdriver->disconnect(info->control);
+
+	/* allow user to unbind using either control or data */
+	if (intf == info->control)
+		other = info->data;
+	else
+		other = info->control;
+
+	/* only if not shared */
+	if (other && intf != other) {
+		usb_set_intfdata(other, NULL);
+		usb_driver_release_interface(driver, other);
+	}
 
-	dev->data[0] = (unsigned long)NULL;
+	info->subdriver = NULL;
+	info->data = NULL;
+	info->control = NULL;
 }
 
 /* suspend/resume wrappers calling both usbnet and the cdc-wdm
@@ -280,15 +308,15 @@ static void qmi_wwan_unbind_shared(struct usbnet *dev, struct usb_interface *int
 static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message)
 {
 	struct usbnet *dev = usb_get_intfdata(intf);
-	struct usb_driver *subdriver = (void *)dev->data[0];
+	struct qmi_wwan_state *info = (void *)&dev->data;
 	int ret;
 
 	ret = usbnet_suspend(intf, message);
 	if (ret < 0)
 		goto err;
 
-	if (subdriver && subdriver->suspend)
-		ret = subdriver->suspend(intf, message);
+	if (info->subdriver && info->subdriver->suspend)
+		ret = info->subdriver->suspend(intf, message);
 	if (ret < 0)
 		usbnet_resume(intf);
 err:
@@ -298,33 +326,33 @@ err:
 static int qmi_wwan_resume(struct usb_interface *intf)
 {
 	struct usbnet *dev = usb_get_intfdata(intf);
-	struct usb_driver *subdriver = (void *)dev->data[0];
+	struct qmi_wwan_state *info = (void *)&dev->data;
 	int ret = 0;
 
-	if (subdriver && subdriver->resume)
-		ret = subdriver->resume(intf);
+	if (info->subdriver && info->subdriver->resume)
+		ret = info->subdriver->resume(intf);
 	if (ret < 0)
 		goto err;
 	ret = usbnet_resume(intf);
-	if (ret < 0 && subdriver && subdriver->resume && subdriver->suspend)
-		subdriver->suspend(intf, PMSG_SUSPEND);
+	if (ret < 0 && info->subdriver && info->subdriver->resume && info->subdriver->suspend)
+		info->subdriver->suspend(intf, PMSG_SUSPEND);
 err:
 	return ret;
 }
 
-
 static const struct driver_info	qmi_wwan_info = {
-	.description	= "QMI speaking wwan device",
+	.description	= "WWAN/QMI device",
 	.flags		= FLAG_WWAN,
 	.bind		= qmi_wwan_bind,
+	.unbind		= qmi_wwan_unbind,
 	.manage_power	= qmi_wwan_manage_power,
 };
 
 static const struct driver_info	qmi_wwan_shared = {
-	.description	= "QMI speaking wwan device with combined interface",
+	.description	= "WWAN/QMI device",
 	.flags		= FLAG_WWAN,
 	.bind		= qmi_wwan_bind_shared,
-	.unbind		= qmi_wwan_unbind_shared,
+	.unbind		= qmi_wwan_unbind,
 	.manage_power	= qmi_wwan_manage_power,
 };
 
@@ -332,7 +360,7 @@ static const struct driver_info	qmi_wwan_force_int0 = {
 	.description	= "Qualcomm WWAN/QMI device",
 	.flags		= FLAG_WWAN,
 	.bind		= qmi_wwan_bind_shared,
-	.unbind		= qmi_wwan_unbind_shared,
+	.unbind		= qmi_wwan_unbind,
 	.manage_power	= qmi_wwan_manage_power,
 	.data		= BIT(0), /* interface whitelist bitmap */
 };
@@ -341,16 +369,25 @@ static const struct driver_info	qmi_wwan_force_int1 = {
 	.description	= "Qualcomm WWAN/QMI device",
 	.flags		= FLAG_WWAN,
 	.bind		= qmi_wwan_bind_shared,
-	.unbind		= qmi_wwan_unbind_shared,
+	.unbind		= qmi_wwan_unbind,
 	.manage_power	= qmi_wwan_manage_power,
 	.data		= BIT(1), /* interface whitelist bitmap */
 };
 
+static const struct driver_info qmi_wwan_force_int2 = {
+	.description	= "Qualcomm WWAN/QMI device",
+	.flags		= FLAG_WWAN,
+	.bind		= qmi_wwan_bind_shared,
+	.unbind		= qmi_wwan_unbind,
+	.manage_power	= qmi_wwan_manage_power,
+	.data		= BIT(2), /* interface whitelist bitmap */
+};
+
 static const struct driver_info	qmi_wwan_force_int3 = {
 	.description	= "Qualcomm WWAN/QMI device",
 	.flags		= FLAG_WWAN,
 	.bind		= qmi_wwan_bind_shared,
-	.unbind		= qmi_wwan_unbind_shared,
+	.unbind		= qmi_wwan_unbind,
 	.manage_power	= qmi_wwan_manage_power,
 	.data		= BIT(3), /* interface whitelist bitmap */
 };
@@ -359,7 +396,7 @@ static const struct driver_info	qmi_wwan_force_int4 = {
 	.description	= "Qualcomm WWAN/QMI device",
 	.flags		= FLAG_WWAN,
 	.bind		= qmi_wwan_bind_shared,
-	.unbind		= qmi_wwan_unbind_shared,
+	.unbind		= qmi_wwan_unbind,
 	.manage_power	= qmi_wwan_manage_power,
 	.data		= BIT(4), /* interface whitelist bitmap */
 };
@@ -381,7 +418,7 @@ static const struct driver_info	qmi_wwan_sierra = {
 	.description	= "Sierra Wireless wwan/QMI device",
 	.flags		= FLAG_WWAN,
 	.bind		= qmi_wwan_bind_shared,
-	.unbind		= qmi_wwan_unbind_shared,
+	.unbind		= qmi_wwan_unbind,
 	.manage_power	= qmi_wwan_manage_power,
 	.data		= BIT(8) | BIT(19), /* interface whitelist bitmap */
 };
@@ -404,7 +441,7 @@ static const struct usb_device_id products[] = {
 		.idVendor           = HUAWEI_VENDOR_ID,
 		.bInterfaceClass    = USB_CLASS_VENDOR_SPEC,
 		.bInterfaceSubClass = 1,
-		.bInterfaceProtocol = 8, /* NOTE: This is the *slave* interface of the CDC Union! */
+		.bInterfaceProtocol = 9, /* CDC Ethernet *control* interface */
 		.driver_info        = (unsigned long)&qmi_wwan_info,
 	},
 	{	/* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */
@@ -412,7 +449,7 @@ static const struct usb_device_id products[] = {
 		.idVendor           = HUAWEI_VENDOR_ID,
 		.bInterfaceClass    = USB_CLASS_VENDOR_SPEC,
 		.bInterfaceSubClass = 1,
-		.bInterfaceProtocol = 56, /* NOTE: This is the *slave* interface of the CDC Union! */
+		.bInterfaceProtocol = 57, /* CDC Ethernet *control* interface */
 		.driver_info        = (unsigned long)&qmi_wwan_info,
 	},
 	{	/* Huawei E392, E398 and possibly others in "Windows mode"
@@ -444,6 +481,15 @@ static const struct usb_device_id products[] = {
 		.bInterfaceProtocol = 0xff,
 		.driver_info        = (unsigned long)&qmi_wwan_force_int4,
 	},
+	{	/* ZTE MF821D */
+		.match_flags        = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
+		.idVendor           = 0x19d2,
+		.idProduct          = 0x0326,
+		.bInterfaceClass    = 0xff,
+		.bInterfaceSubClass = 0xff,
+		.bInterfaceProtocol = 0xff,
+		.driver_info        = (unsigned long)&qmi_wwan_force_int4,
+	},
 	{	/* ZTE (Vodafone) K3520-Z */
 		.match_flags	    = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
 		.idVendor           = 0x19d2,
@@ -498,6 +544,15 @@ static const struct usb_device_id products[] = {
 		.bInterfaceProtocol = 0xff,
 		.driver_info        = (unsigned long)&qmi_wwan_force_int4,
 	},
+	{	/* ZTE MF60 */
+		.match_flags	    = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
+		.idVendor           = 0x19d2,
+		.idProduct          = 0x1402,
+		.bInterfaceClass    = 0xff,
+		.bInterfaceSubClass = 0xff,
+		.bInterfaceProtocol = 0xff,
+		.driver_info        = (unsigned long)&qmi_wwan_force_int2,
+	},
 	{	/* Sierra Wireless MC77xx in QMI mode */
 		.match_flags	    = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
 		.idVendor           = 0x1199,
@@ -554,10 +609,27 @@ static const struct usb_device_id products[] = {
 };
 MODULE_DEVICE_TABLE(usb, products);
 
+static int qmi_wwan_probe(struct usb_interface *intf, const struct usb_device_id *prod)
+{
+	struct usb_device_id *id = (struct usb_device_id *)prod;
+
+	/* Workaround to enable dynamic IDs.  This disables usbnet
+	 * blacklisting functionality.  Which, if required, can be
+	 * reimplemented here by using a magic "blacklist" value
+	 * instead of 0 in the static device id table
+	 */
+	if (!id->driver_info) {
+		dev_dbg(&intf->dev, "setting defaults for dynamic device id\n");
+		id->driver_info = (unsigned long)&qmi_wwan_shared;
+	}
+
+	return usbnet_probe(intf, id);
+}
+
 static struct usb_driver qmi_wwan_driver = {
 	.name		      = "qmi_wwan",
 	.id_table	      = products,
-	.probe		      =	usbnet_probe,
+	.probe		      = qmi_wwan_probe,
 	.disconnect	      = usbnet_disconnect,
 	.suspend	      = qmi_wwan_suspend,
 	.resume		      =	qmi_wwan_resume,
@@ -566,17 +638,7 @@ static struct usb_driver qmi_wwan_driver = {
 	.disable_hub_initiated_lpm = 1,
 };
 
-static int __init qmi_wwan_init(void)
-{
-	return usb_register(&qmi_wwan_driver);
-}
-module_init(qmi_wwan_init);
-
-static void __exit qmi_wwan_exit(void)
-{
-	usb_deregister(&qmi_wwan_driver);
-}
-module_exit(qmi_wwan_exit);
+module_usb_driver(qmi_wwan_driver);
 
 MODULE_AUTHOR("Bjørn Mork <bjorn@mork.no>");
 MODULE_DESCRIPTION("Qualcomm MSM Interface (QMI) WWAN driver");
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index 1c6e51588da7..f5ab6e613ec8 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -616,7 +616,7 @@ static void smsc75xx_init_mac_address(struct usbnet *dev)
 
 	/* no eeprom, or eeprom values are invalid. generate random MAC */
 	eth_hw_addr_random(dev->net);
-	netif_dbg(dev, ifup, dev->net, "MAC address set to random_ether_addr");
+	netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr");
 }
 
 static int smsc75xx_set_mac_address(struct usbnet *dev)
@@ -1260,6 +1260,6 @@ static struct usb_driver smsc75xx_driver = {
 module_usb_driver(smsc75xx_driver);
 
 MODULE_AUTHOR("Nancy Lin");
-MODULE_AUTHOR("Steve Glendinning <steve.glendinning@smsc.com>");
+MODULE_AUTHOR("Steve Glendinning <steve.glendinning@shawell.net>");
 MODULE_DESCRIPTION("SMSC75XX USB 2.0 Gigabit Ethernet Devices");
 MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index b1112e753859..d45e539a84b7 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -578,6 +578,36 @@ static int smsc95xx_ethtool_set_eeprom(struct net_device *netdev,
 	return smsc95xx_write_eeprom(dev, ee->offset, ee->len, data);
 }
 
+static int smsc95xx_ethtool_getregslen(struct net_device *netdev)
+{
+	/* all smsc95xx registers */
+	return COE_CR - ID_REV + 1;
+}
+
+static void
+smsc95xx_ethtool_getregs(struct net_device *netdev, struct ethtool_regs *regs,
+			 void *buf)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	unsigned int i, j;
+	int retval;
+	u32 *data = buf;
+
+	retval = smsc95xx_read_reg(dev, ID_REV, &regs->version);
+	if (retval < 0) {
+		netdev_warn(netdev, "REGS: cannot read ID_REV\n");
+		return;
+	}
+
+	for (i = ID_REV, j = 0; i <= COE_CR; i += (sizeof(u32)), j++) {
+		retval = smsc95xx_read_reg(dev, i, &data[j]);
+		if (retval < 0) {
+			netdev_warn(netdev, "REGS: cannot read reg[%x]\n", i);
+			return;
+		}
+	}
+}
+
 static const struct ethtool_ops smsc95xx_ethtool_ops = {
 	.get_link	= usbnet_get_link,
 	.nway_reset	= usbnet_nway_reset,
@@ -589,6 +619,8 @@ static const struct ethtool_ops smsc95xx_ethtool_ops = {
 	.get_eeprom_len	= smsc95xx_ethtool_get_eeprom_len,
 	.get_eeprom	= smsc95xx_ethtool_get_eeprom,
 	.set_eeprom	= smsc95xx_ethtool_set_eeprom,
+	.get_regs_len	= smsc95xx_ethtool_getregslen,
+	.get_regs	= smsc95xx_ethtool_getregs,
 };
 
 static int smsc95xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
@@ -615,7 +647,7 @@ static void smsc95xx_init_mac_address(struct usbnet *dev)
 
 	/* no eeprom, or eeprom values are invalid. generate random MAC */
 	eth_hw_addr_random(dev->net);
-	netif_dbg(dev, ifup, dev->net, "MAC address set to random_ether_addr\n");
+	netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr\n");
 }
 
 static int smsc95xx_set_mac_address(struct usbnet *dev)
@@ -1303,6 +1335,6 @@ static struct usb_driver smsc95xx_driver = {
 module_usb_driver(smsc95xx_driver);
 
 MODULE_AUTHOR("Nancy Lin");
-MODULE_AUTHOR("Steve Glendinning <steve.glendinning@smsc.com>");
+MODULE_AUTHOR("Steve Glendinning <steve.glendinning@shawell.net>");
 MODULE_DESCRIPTION("SMSC95XX USB 2.0 Ethernet Devices");
 MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index aba769d77459..8531c1caac28 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -180,7 +180,40 @@ int usbnet_get_ethernet_addr(struct usbnet *dev, int iMACAddress)
 }
 EXPORT_SYMBOL_GPL(usbnet_get_ethernet_addr);
 
-static void intr_complete (struct urb *urb);
+static void intr_complete (struct urb *urb)
+{
+	struct usbnet	*dev = urb->context;
+	int		status = urb->status;
+
+	switch (status) {
+	/* success */
+	case 0:
+		dev->driver_info->status(dev, urb);
+		break;
+
+	/* software-driven interface shutdown */
+	case -ENOENT:		/* urb killed */
+	case -ESHUTDOWN:	/* hardware gone */
+		netif_dbg(dev, ifdown, dev->net,
+			  "intr shutdown, code %d\n", status);
+		return;
+
+	/* NOTE:  not throttling like RX/TX, since this endpoint
+	 * already polls infrequently
+	 */
+	default:
+		netdev_dbg(dev->net, "intr status %d\n", status);
+		break;
+	}
+
+	if (!netif_running (dev->net))
+		return;
+
+	status = usb_submit_urb (urb, GFP_ATOMIC);
+	if (status != 0)
+		netif_err(dev, timer, dev->net,
+			  "intr resubmit --> %d\n", status);
+}
 
 static int init_status (struct usbnet *dev, struct usb_interface *intf)
 {
@@ -519,42 +552,6 @@ block:
 	netif_dbg(dev, rx_err, dev->net, "no read resubmitted\n");
 }
 
-static void intr_complete (struct urb *urb)
-{
-	struct usbnet	*dev = urb->context;
-	int		status = urb->status;
-
-	switch (status) {
-	/* success */
-	case 0:
-		dev->driver_info->status(dev, urb);
-		break;
-
-	/* software-driven interface shutdown */
-	case -ENOENT:		/* urb killed */
-	case -ESHUTDOWN:	/* hardware gone */
-		netif_dbg(dev, ifdown, dev->net,
-			  "intr shutdown, code %d\n", status);
-		return;
-
-	/* NOTE:  not throttling like RX/TX, since this endpoint
-	 * already polls infrequently
-	 */
-	default:
-		netdev_dbg(dev->net, "intr status %d\n", status);
-		break;
-	}
-
-	if (!netif_running (dev->net))
-		return;
-
-	memset(urb->transfer_buffer, 0, urb->transfer_buffer_length);
-	status = usb_submit_urb (urb, GFP_ATOMIC);
-	if (status != 0)
-		netif_err(dev, timer, dev->net,
-			  "intr resubmit --> %d\n", status);
-}
-
 /*-------------------------------------------------------------------------*/
 void usbnet_pause_rx(struct usbnet *dev)
 {
@@ -1312,7 +1309,6 @@ void usbnet_disconnect (struct usb_interface *intf)
 	usb_free_urb(dev->interrupt);
 
 	free_netdev(net);
-	usb_put_dev (xdev);
 }
 EXPORT_SYMBOL_GPL(usbnet_disconnect);
 
@@ -1368,8 +1364,6 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 	xdev = interface_to_usbdev (udev);
 	interface = udev->cur_altsetting;
 
-	usb_get_dev (xdev);
-
 	status = -ENOMEM;
 
 	// set up our own records
@@ -1498,7 +1492,6 @@ out3:
 out1:
 	free_netdev(net);
 out:
-	usb_put_dev(xdev);
 	return status;
 }
 EXPORT_SYMBOL_GPL(usbnet_probe);
@@ -1600,7 +1593,7 @@ static int __init usbnet_init(void)
 	BUILD_BUG_ON(
 		FIELD_SIZEOF(struct sk_buff, cb) < sizeof(struct skb_data));
 
-	random_ether_addr(node_id);
+	eth_random_addr(node_id);
 	return 0;
 }
 module_init(usbnet_init);