summaryrefslogtreecommitdiffstats
path: root/drivers/net/tg3.c
diff options
context:
space:
mode:
authorMatt Carlson <mcarlson@broadcom.com>2011-04-20 07:57:38 +0000
committerDavid S. Miller <davem@davemloft.net>2011-04-21 17:05:56 -0700
commit34eea5ac214353ccd93ef7dd8dbd10aed87f5f46 (patch)
tree73c13f9fc49f7c7a0ef517adca25c847dc214d44 /drivers/net/tg3.c
parent4a85f09831329bc5a5e4b9bca3f3ecbffb78f858 (diff)
downloadblackbird-op-linux-34eea5ac214353ccd93ef7dd8dbd10aed87f5f46.tar.gz
blackbird-op-linux-34eea5ac214353ccd93ef7dd8dbd10aed87f5f46.zip
tg3: Only allow phy ioctls while netif_running
When tg3 was new, phy accesses through ioctl were allowable at any time. Then, the driver started shutting down the phy when the device was closed. Phy accesses would be allowed when the driver first attached to the device, but then would be forbidden after the device had been up'd and down'd. After that, management firmware made it illegal to access the phy unless the driver "owned" the device. Now that most firmware is being moved over to the APE, it is less clear when phy accesses are safe. While it is possible to attempt to identify these conditions and code the driver to navigate through the pitfalls, it could be perplexing to the admin why phy accesses work in some cases and not others. This patch brings some uniformity to the problem by only allowing phy accesses while the driver has control of the device. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/tg3.c')
-rw-r--r--drivers/net/tg3.c8
1 files changed, 2 insertions, 6 deletions
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 1f233c49b4f0..e134e484aee3 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -11444,9 +11444,7 @@ static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)
break; /* We have no PHY */
- if ((tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) ||
- ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
- !netif_running(dev)))
+ if (!netif_running(dev))
return -EAGAIN;
spin_lock_bh(&tp->lock);
@@ -11462,9 +11460,7 @@ static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)
break; /* We have no PHY */
- if ((tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) ||
- ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
- !netif_running(dev)))
+ if (!netif_running(dev))
return -EAGAIN;
spin_lock_bh(&tp->lock);
OpenPOWER on IntegriCloud