summaryrefslogtreecommitdiffstats
path: root/drivers/net/stmmac
diff options
context:
space:
mode:
authorGiuseppe CAVALLARO <peppe.cavallaro@st.com>2010-11-24 02:37:58 +0000
committerDavid S. Miller <davem@davemloft.net>2010-11-24 11:14:24 -0800
commit9dfeb4d953f914bd3bb56ce60e22ee84687399ce (patch)
tree37d9d33974944cb219e911e0aa965d337fee2ed7 /drivers/net/stmmac
parentb340007f79941297c44a7dfba4d3c587ff81590f (diff)
downloadblackbird-op-linux-9dfeb4d953f914bd3bb56ce60e22ee84687399ce.tar.gz
blackbird-op-linux-9dfeb4d953f914bd3bb56ce60e22ee84687399ce.zip
stmmac: tidy-up stmmac_priv structure
This patch tidies-up the stmmac_priv structure that had many fileds alredy defined in the plat_stmmacenet_data structure. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/stmmac')
-rw-r--r--drivers/net/stmmac/stmmac.h15
-rw-r--r--drivers/net/stmmac/stmmac_ethtool.c4
-rw-r--r--drivers/net/stmmac/stmmac_main.c69
-rw-r--r--drivers/net/stmmac/stmmac_mdio.c8
4 files changed, 44 insertions, 52 deletions
diff --git a/drivers/net/stmmac/stmmac.h b/drivers/net/stmmac/stmmac.h
index 79bdc2e13224..31575670d862 100644
--- a/drivers/net/stmmac/stmmac.h
+++ b/drivers/net/stmmac/stmmac.h
@@ -37,7 +37,6 @@ struct stmmac_priv {
unsigned int cur_tx;
unsigned int dirty_tx;
unsigned int dma_tx_size;
- int tx_coe;
int tx_coalesce;
struct dma_desc *dma_rx ;
@@ -48,7 +47,6 @@ struct stmmac_priv {
struct sk_buff_head rx_recycle;
struct net_device *dev;
- int is_gmac;
dma_addr_t dma_rx_phy;
unsigned int dma_rx_size;
unsigned int dma_buf_sz;
@@ -60,14 +58,11 @@ struct stmmac_priv {
struct napi_struct napi;
phy_interface_t phy_interface;
- int pbl;
- int bus_id;
int phy_addr;
int phy_mask;
int (*phy_reset) (void *priv);
- void (*fix_mac_speed) (void *priv, unsigned int speed);
- void (*bus_setup)(void __iomem *ioaddr);
- void *bsp_priv;
+ int rx_coe;
+ int no_csum_insertion;
int phy_irq;
struct phy_device *phydev;
@@ -77,7 +72,6 @@ struct stmmac_priv {
unsigned int flow_ctrl;
unsigned int pause;
struct mii_bus *mii;
- int mii_clk_csr;
u32 msg_enable;
spinlock_t lock;
@@ -90,10 +84,7 @@ struct stmmac_priv {
#ifdef STMMAC_VLAN_TAG_USED
struct vlan_group *vlgrp;
#endif
- int enh_desc;
- int rx_coe;
- int bugged_jumbo;
- int no_csum_insertion;
+ struct plat_stmmacenet_data *plat;
};
#ifdef CONFIG_STM_DRIVERS
diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/stmmac/stmmac_ethtool.c
index 6d65482e789a..f2695fd180ca 100644
--- a/drivers/net/stmmac/stmmac_ethtool.c
+++ b/drivers/net/stmmac/stmmac_ethtool.c
@@ -94,7 +94,7 @@ static void stmmac_ethtool_getdrvinfo(struct net_device *dev,
{
struct stmmac_priv *priv = netdev_priv(dev);
- if (!priv->is_gmac)
+ if (!priv->plat->has_gmac)
strcpy(info->driver, MAC100_ETHTOOL_NAME);
else
strcpy(info->driver, GMAC_ETHTOOL_NAME);
@@ -176,7 +176,7 @@ static void stmmac_ethtool_gregs(struct net_device *dev,
memset(reg_space, 0x0, REG_SPACE_SIZE);
- if (!priv->is_gmac) {
+ if (!priv->plat->has_gmac) {
/* MAC registers */
for (i = 0; i < 12; i++)
reg_space[i] = readl(priv->ioaddr + (i * 4));
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index 06bc6034ce81..29ba28660fa9 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -186,6 +186,18 @@ static inline u32 stmmac_tx_avail(struct stmmac_priv *priv)
return priv->dirty_tx + priv->dma_tx_size - priv->cur_tx - 1;
}
+/* On some ST platforms, some HW system configuraton registers have to be
+ * set according to the link speed negotiated.
+ */
+static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv)
+{
+ struct phy_device *phydev = priv->phydev;
+
+ if (likely(priv->plat->fix_mac_speed))
+ priv->plat->fix_mac_speed(priv->plat->bsp_priv,
+ phydev->speed);
+}
+
/**
* stmmac_adjust_link
* @dev: net device structure
@@ -228,15 +240,13 @@ static void stmmac_adjust_link(struct net_device *dev)
new_state = 1;
switch (phydev->speed) {
case 1000:
- if (likely(priv->is_gmac))
+ if (likely(priv->plat->has_gmac))
ctrl &= ~priv->hw->link.port;
- if (likely(priv->fix_mac_speed))
- priv->fix_mac_speed(priv->bsp_priv,
- phydev->speed);
+ stmmac_hw_fix_mac_speed(priv);
break;
case 100:
case 10:
- if (priv->is_gmac) {
+ if (priv->plat->has_gmac) {
ctrl |= priv->hw->link.port;
if (phydev->speed == SPEED_100) {
ctrl |= priv->hw->link.speed;
@@ -246,9 +256,7 @@ static void stmmac_adjust_link(struct net_device *dev)
} else {
ctrl &= ~priv->hw->link.port;
}
- if (likely(priv->fix_mac_speed))
- priv->fix_mac_speed(priv->bsp_priv,
- phydev->speed);
+ stmmac_hw_fix_mac_speed(priv);
break;
default:
if (netif_msg_link(priv))
@@ -305,7 +313,7 @@ static int stmmac_init_phy(struct net_device *dev)
return 0;
}
- snprintf(bus_id, MII_BUS_ID_SIZE, "%x", priv->bus_id);
+ snprintf(bus_id, MII_BUS_ID_SIZE, "%x", priv->plat->bus_id);
snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
priv->phy_addr);
pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id);
@@ -552,7 +560,7 @@ static void free_dma_desc_resources(struct stmmac_priv *priv)
*/
static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
{
- if (likely((priv->tx_coe) && (!priv->no_csum_insertion))) {
+ if (likely((priv->plat->tx_coe) && (!priv->no_csum_insertion))) {
/* In case of GMAC, SF mode has to be enabled
* to perform the TX COE. This depends on:
* 1) TX COE if actually supported
@@ -814,7 +822,7 @@ static int stmmac_open(struct net_device *dev)
init_dma_desc_rings(dev);
/* DMA initialization and SW reset */
- if (unlikely(priv->hw->dma->init(priv->ioaddr, priv->pbl,
+ if (unlikely(priv->hw->dma->init(priv->ioaddr, priv->plat->pbl,
priv->dma_tx_phy,
priv->dma_rx_phy) < 0)) {
@@ -825,15 +833,15 @@ static int stmmac_open(struct net_device *dev)
/* Copy the MAC addr into the HW */
priv->hw->mac->set_umac_addr(priv->ioaddr, dev->dev_addr, 0);
/* If required, perform hw setup of the bus. */
- if (priv->bus_setup)
- priv->bus_setup(priv->ioaddr);
+ if (priv->plat->bus_setup)
+ priv->plat->bus_setup(priv->ioaddr);
/* Initialize the MAC Core */
priv->hw->mac->core_init(priv->ioaddr);
priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
if (priv->rx_coe)
pr_info("stmmac: Rx Checksum Offload Engine supported\n");
- if (priv->tx_coe)
+ if (priv->plat->tx_coe)
pr_info("\tTX Checksum insertion supported\n");
priv->shutdown = 0;
@@ -1042,7 +1050,8 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
return stmmac_sw_tso(priv, skb);
if (likely((skb->ip_summed == CHECKSUM_PARTIAL))) {
- if (unlikely((!priv->tx_coe) || (priv->no_csum_insertion)))
+ if (unlikely((!priv->plat->tx_coe) ||
+ (priv->no_csum_insertion)))
skb_checksum_help(skb);
else
csum_insertion = 1;
@@ -1146,7 +1155,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv)
DMA_FROM_DEVICE);
(p + entry)->des2 = priv->rx_skbuff_dma[entry];
- if (unlikely(priv->is_gmac)) {
+ if (unlikely(priv->plat->has_gmac)) {
if (bfsize >= BUF_SIZE_8KiB)
(p + entry)->des3 =
(p + entry)->des2 + BUF_SIZE_8KiB;
@@ -1356,7 +1365,7 @@ static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
return -EBUSY;
}
- if (priv->is_gmac)
+ if (priv->plat->has_gmac)
max_mtu = JUMBO_LEN;
else
max_mtu = ETH_DATA_LEN;
@@ -1370,7 +1379,7 @@ static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
* needs to have the Tx COE disabled for oversized frames
* (due to limited buffer sizes). In this case we disable
* the TX csum insertionin the TDES and not use SF. */
- if ((priv->bugged_jumbo) && (priv->dev->mtu > ETH_DATA_LEN))
+ if ((priv->plat->bugged_jumbo) && (priv->dev->mtu > ETH_DATA_LEN))
priv->no_csum_insertion = 1;
else
priv->no_csum_insertion = 0;
@@ -1390,7 +1399,7 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
return IRQ_NONE;
}
- if (priv->is_gmac)
+ if (priv->plat->has_gmac)
/* To handle GMAC own interrupts */
priv->hw->mac->host_irq_status((void __iomem *) dev->base_addr);
@@ -1536,7 +1545,7 @@ static int stmmac_mac_device_setup(struct net_device *dev)
struct mac_device_info *device;
- if (priv->is_gmac)
+ if (priv->plat->has_gmac)
device = dwmac1000_setup(priv->ioaddr);
else
device = dwmac100_setup(priv->ioaddr);
@@ -1544,7 +1553,7 @@ static int stmmac_mac_device_setup(struct net_device *dev)
if (!device)
return -ENOMEM;
- if (priv->enh_desc) {
+ if (priv->plat->enh_desc) {
device->desc = &enh_desc_ops;
pr_info("\tEnhanced descriptor structure\n");
} else
@@ -1598,7 +1607,7 @@ static int stmmac_associate_phy(struct device *dev, void *data)
plat_dat->bus_id);
/* Check that this phy is for the MAC being initialised */
- if (priv->bus_id != plat_dat->bus_id)
+ if (priv->plat->bus_id != plat_dat->bus_id)
return 0;
/* OK, this PHY is connected to the MAC.
@@ -1683,13 +1692,9 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
priv->device = &(pdev->dev);
priv->dev = ndev;
plat_dat = pdev->dev.platform_data;
- priv->bus_id = plat_dat->bus_id;
- priv->pbl = plat_dat->pbl; /* TLI */
- priv->mii_clk_csr = plat_dat->clk_csr;
- priv->tx_coe = plat_dat->tx_coe;
- priv->bugged_jumbo = plat_dat->bugged_jumbo;
- priv->is_gmac = plat_dat->has_gmac; /* GMAC is on board */
- priv->enh_desc = plat_dat->enh_desc;
+
+ priv->plat = plat_dat;
+
priv->ioaddr = addr;
/* PMT module is not integrated in all the MAC devices. */
@@ -1727,16 +1732,12 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
goto out;
}
- priv->fix_mac_speed = plat_dat->fix_mac_speed;
- priv->bus_setup = plat_dat->bus_setup;
- priv->bsp_priv = plat_dat->bsp_priv;
-
pr_info("\t%s - (dev. name: %s - id: %d, IRQ #%d\n"
"\tIO base addr: 0x%p)\n", ndev->name, pdev->name,
pdev->id, ndev->irq, addr);
/* MDIO bus Registration */
- pr_debug("\tMDIO bus (id: %d)...", priv->bus_id);
+ pr_debug("\tMDIO bus (id: %d)...", priv->plat->bus_id);
ret = stmmac_mdio_register(ndev);
if (ret < 0)
goto out;
diff --git a/drivers/net/stmmac/stmmac_mdio.c b/drivers/net/stmmac/stmmac_mdio.c
index d7441616357d..234b4068a1fc 100644
--- a/drivers/net/stmmac/stmmac_mdio.c
+++ b/drivers/net/stmmac/stmmac_mdio.c
@@ -53,7 +53,7 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
int data;
u16 regValue = (((phyaddr << 11) & (0x0000F800)) |
((phyreg << 6) & (0x000007C0)));
- regValue |= MII_BUSY | ((priv->mii_clk_csr & 7) << 2);
+ regValue |= MII_BUSY | ((priv->plat->clk_csr & 7) << 2);
do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1);
writel(regValue, priv->ioaddr + mii_address);
@@ -85,7 +85,7 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
(((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0)))
| MII_WRITE;
- value |= MII_BUSY | ((priv->mii_clk_csr & 7) << 2);
+ value |= MII_BUSY | ((priv->plat->clk_csr & 7) << 2);
/* Wait until any existing MII operation is complete */
@@ -114,7 +114,7 @@ static int stmmac_mdio_reset(struct mii_bus *bus)
if (priv->phy_reset) {
pr_debug("stmmac_mdio_reset: calling phy_reset\n");
- priv->phy_reset(priv->bsp_priv);
+ priv->phy_reset(priv->plat->bsp_priv);
}
/* This is a workaround for problems with the STE101P PHY.
@@ -157,7 +157,7 @@ int stmmac_mdio_register(struct net_device *ndev)
new_bus->read = &stmmac_mdio_read;
new_bus->write = &stmmac_mdio_write;
new_bus->reset = &stmmac_mdio_reset;
- snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", priv->bus_id);
+ snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", priv->plat->bus_id);
new_bus->priv = ndev;
new_bus->irq = irqlist;
new_bus->phy_mask = priv->phy_mask;
OpenPOWER on IntegriCloud