diff options
| author | Stephen Hemminger <shemminger@osdl.org> | 2005-11-08 10:33:40 -0800 |
|---|---|---|
| committer | Jeff Garzik <jgarzik@pobox.com> | 2005-11-08 23:58:07 -0500 |
| commit | adba9e23b4066f1d741a2076fc6ad18b6c0cea44 (patch) | |
| tree | ca77fccedcc52d4b5850b2823a4e4ad5e840ddd1 /drivers/net/skge.c | |
| parent | 3133c5e896c0b2509e72ae0c2cb9452c80d47f46 (diff) | |
| download | blackbird-op-linux-adba9e23b4066f1d741a2076fc6ad18b6c0cea44.tar.gz blackbird-op-linux-adba9e23b4066f1d741a2076fc6ad18b6c0cea44.zip | |
[PATCH] skge: clear PCI PHY COMA mode on boot
When skge is booted up, the PHY may be stuck in power down state
by the previous OS. So we may need to turn it on.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Diffstat (limited to 'drivers/net/skge.c')
| -rw-r--r-- | drivers/net/skge.c | 10 |
1 files changed, 10 insertions, 0 deletions
diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 572f121b1f4e..fe806dbc1914 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -2893,6 +2893,7 @@ static const char *skge_board_name(const struct skge_hw *hw) */ static int skge_reset(struct skge_hw *hw) { + u32 reg; u16 ctst; u8 t8, mac_cfg, pmd_type, phy_type; int i; @@ -2971,6 +2972,7 @@ static int skge_reset(struct skge_hw *hw) /* switch power to VCC (WA for VAUX problem) */ skge_write8(hw, B0_POWER_CTRL, PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON); + /* avoid boards with stuck Hardware error bits */ if ((skge_read32(hw, B0_ISRC) & IS_HW_ERR) && (skge_read32(hw, B0_HWE_ISRC) & IS_IRQ_SENSOR)) { @@ -2978,6 +2980,14 @@ static int skge_reset(struct skge_hw *hw) hw->intr_mask &= ~IS_HW_ERR; } + /* Clear PHY COMA */ + skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); + pci_read_config_dword(hw->pdev, PCI_DEV_REG1, ®); + reg &= ~PCI_PHY_COMA; + pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg); + skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + + for (i = 0; i < hw->ports; i++) { skge_write16(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET); skge_write16(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR); |
