Remove sk98lin ethernet driver.

Unmaintained, superceded by skge.

Prodded to deletion by Adrian Bunk.  Acked by Stephen Hemminger.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 0 insertions, 2229 deletions

diff --git a/drivers/net/sk98lin/skgesirq.c b/drivers/net/sk98lin/skgesirq.c
deleted file mode 100644
index 3e7aa49afd00..000000000000
--- a/drivers/net/sk98lin/skgesirq.c
+++ /dev/null
@@ -1,2229 +0,0 @@
-/******************************************************************************
- *
- * Name:	skgesirq.c
- * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.92 $
- * Date:	$Date: 2003/09/16 14:37:07 $
- * Purpose:	Special IRQ module
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
- *	Special Interrupt handler
- *
- *	The following abstract should show how this module is included
- *	in the driver path:
- *
- *	In the ISR of the driver the bits for frame transmission complete and
- *	for receive complete are checked and handled by the driver itself.
- *	The bits of the slow path mask are checked after that and then the
- *	entry into the so-called "slow path" is prepared. It is an implementors
- *	decision whether this is executed directly or just scheduled by
- *	disabling the mask. In the interrupt service routine some events may be
- *	generated, so it would be a good idea to call the EventDispatcher
- *	right after this ISR.
- *
- *	The Interrupt source register of the adapter is NOT read by this module.
- *  SO if the drivers implementor needs a while loop around the
- *	slow data paths interrupt bits, he needs to call the SkGeSirqIsr() for
- *	each loop entered.
- *
- *	However, the MAC Interrupt status registers are read in a while loop.
- *
- */
-
-#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
-static const char SysKonnectFileId[] =
-	"@(#) $Id: skgesirq.c,v 1.92 2003/09/16 14:37:07 rschmidt Exp $ (C) Marvell.";
-#endif
-
-#include "h/skdrv1st.h"		/* Driver Specific Definitions */
-#ifndef SK_SLIM
-#include "h/skgepnmi.h"		/* PNMI Definitions */
-#include "h/skrlmt.h"		/* RLMT Definitions */
-#endif
-#include "h/skdrv2nd.h"		/* Adapter Control and Driver specific Def. */
-
-/* local function prototypes */
-#ifdef GENESIS
-static int	SkGePortCheckUpXmac(SK_AC*, SK_IOC, int, SK_BOOL);
-static int	SkGePortCheckUpBcom(SK_AC*, SK_IOC, int, SK_BOOL);
-static void	SkPhyIsrBcom(SK_AC*, SK_IOC, int, SK_U16);
-#endif /* GENESIS */
-#ifdef YUKON
-static int	SkGePortCheckUpGmac(SK_AC*, SK_IOC, int, SK_BOOL);
-static void	SkPhyIsrGmac(SK_AC*, SK_IOC, int, SK_U16);
-#endif /* YUKON */
-#ifdef OTHER_PHY
-static int	SkGePortCheckUpLone(SK_AC*, SK_IOC, int, SK_BOOL);
-static int	SkGePortCheckUpNat(SK_AC*, SK_IOC, int, SK_BOOL);
-static void	SkPhyIsrLone(SK_AC*, SK_IOC, int, SK_U16);
-#endif /* OTHER_PHY */
-
-#ifdef GENESIS
-/*
- * array of Rx counter from XMAC which are checked
- * in AutoSense mode to check whether a link is not able to auto-negotiate.
- */
-static const SK_U16 SkGeRxRegs[]= {
-	XM_RXF_64B,
-	XM_RXF_127B,
-	XM_RXF_255B,
-	XM_RXF_511B,
-	XM_RXF_1023B,
-	XM_RXF_MAX_SZ
-} ;
-#endif /* GENESIS */
-
-#ifdef __C2MAN__
-/*
- *	Special IRQ function
- *
- *	General Description:
- *
- */
-intro()
-{}
-#endif
-
-/******************************************************************************
- *
- *	SkHWInitDefSense() - Default Autosensing mode initialization
- *
- * Description: sets the PLinkMode for HWInit
- *
- * Returns: N/A
- */
-static void SkHWInitDefSense(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	pPrt->PAutoNegTimeOut = 0;
-
-	if (pPrt->PLinkModeConf != SK_LMODE_AUTOSENSE) {
-		pPrt->PLinkMode = pPrt->PLinkModeConf;
-		return;
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-		("AutoSensing: First mode %d on Port %d\n",
-		(int)SK_LMODE_AUTOFULL, Port));
-
-	pPrt->PLinkMode = (SK_U8)SK_LMODE_AUTOFULL;
-
-	return;
-}	/* SkHWInitDefSense */
-
-
-#ifdef GENESIS
-/******************************************************************************
- *
- *	SkHWSenseGetNext() - Get Next Autosensing Mode
- *
- * Description: gets the appropriate next mode
- *
- * Note:
- *
- */
-static SK_U8 SkHWSenseGetNext(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	pPrt->PAutoNegTimeOut = 0;
-
-    if (pPrt->PLinkModeConf != (SK_U8)SK_LMODE_AUTOSENSE) {
-		/* Leave all as configured */
-		return(pPrt->PLinkModeConf);
-	}
-
-    if (pPrt->PLinkMode == (SK_U8)SK_LMODE_AUTOFULL) {
-		/* Return next mode AUTOBOTH */
-        return ((SK_U8)SK_LMODE_AUTOBOTH);
-	}
-
-	/* Return default autofull */
-    return ((SK_U8)SK_LMODE_AUTOFULL);
-}	/* SkHWSenseGetNext */
-
-
-/******************************************************************************
- *
- *	SkHWSenseSetNext() - Autosensing Set next mode
- *
- * Description:	sets the appropriate next mode
- *
- * Returns: N/A
- */
-static void SkHWSenseSetNext(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-SK_U8	NewMode)	/* New Mode to be written in sense mode */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	pPrt->PAutoNegTimeOut = 0;
-
-    if (pPrt->PLinkModeConf != (SK_U8)SK_LMODE_AUTOSENSE) {
-		return;
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-		("AutoSensing: next mode %d on Port %d\n",
-		(int)NewMode, Port));
-
-	pPrt->PLinkMode = NewMode;
-
-	return;
-}	/* SkHWSenseSetNext */
-#endif /* GENESIS */
-
-
-/******************************************************************************
- *
- *	SkHWLinkDown() - Link Down handling
- *
- * Description: handles the hardware link down signal
- *
- * Returns: N/A
- */
-void SkHWLinkDown(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* Disable all MAC interrupts */
-	SkMacIrqDisable(pAC, IoC, Port);
-
-	/* Disable Receiver and Transmitter */
-	SkMacRxTxDisable(pAC, IoC, Port);
-	
-	/* Init default sense mode */
-	SkHWInitDefSense(pAC, IoC, Port);
-
-	if (pPrt->PHWLinkUp == SK_FALSE) {
-		return;
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-		("Link down Port %d\n", Port));
-
-	/* Set Link to DOWN */
-	pPrt->PHWLinkUp = SK_FALSE;
-
-	/* Reset Port stati */
-    pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN;
-    pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE;
-	pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_INDETERMINATED;
-
-	/* Re-init Phy especially when the AutoSense default is set now */
-	SkMacInitPhy(pAC, IoC, Port, SK_FALSE);
-
-	/* GP0: used for workaround of Rev. C Errata 2 */
-
-	/* Do NOT signal to RLMT */
-
-	/* Do NOT start the timer here */
-}	/* SkHWLinkDown */
-
-
-/******************************************************************************
- *
- *	SkHWLinkUp() - Link Up handling
- *
- * Description: handles the hardware link up signal
- *
- * Returns: N/A
- */
-static void SkHWLinkUp(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (pPrt->PHWLinkUp) {
-		/* We do NOT need to proceed on active link */
-		return;
-	}
-
-	pPrt->PHWLinkUp = SK_TRUE;
-	pPrt->PAutoNegFail = SK_FALSE;
-    pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN;
-
-    if (pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOHALF &&
-        pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOFULL &&
-        pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOBOTH) {
-		/* Link is up and no Auto-negotiation should be done */
-
-		/* Link speed should be the configured one */
-		switch (pPrt->PLinkSpeed) {
-		case SK_LSPEED_AUTO:
-			/* default is 1000 Mbps */
-		case SK_LSPEED_1000MBPS:
-			pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS;
-			break;
-		case SK_LSPEED_100MBPS:
-			pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_100MBPS;
-			break;
-		case SK_LSPEED_10MBPS:
-			pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_10MBPS;
-			break;
-		}
-
-		/* Set Link Mode Status */
-		if (pPrt->PLinkMode == SK_LMODE_FULL) {
-			pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_FULL;
-		}
-		else {
-            pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_HALF;
-		}
-
-		/* No flow control without auto-negotiation */
-        pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE;
-
-		/* enable Rx/Tx */
-        (void)SkMacRxTxEnable(pAC, IoC, Port);
-	}
-}	/* SkHWLinkUp */
-
-
-/******************************************************************************
- *
- *	SkMacParity() - MAC parity workaround
- *
- * Description: handles MAC parity errors correctly
- *
- * Returns: N/A
- */
-static void SkMacParity(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index of the port failed */
-{
-	SK_EVPARA	Para;
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	SK_U32		TxMax;		/* Tx Max Size Counter */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* Clear IRQ Tx Parity Error */
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-
-		SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_PERR);
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		/* HW-Bug #8: cleared by GMF_CLI_TX_FC instead of GMF_CLI_TX_PE */
-		SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T),
-			(SK_U8)((pAC->GIni.GIChipId == CHIP_ID_YUKON &&
-			pAC->GIni.GIChipRev == 0) ? GMF_CLI_TX_FC : GMF_CLI_TX_PE));
-	}
-#endif /* YUKON */
-	
-	if (pPrt->PCheckPar) {
-
-		if (Port == MAC_1) {
-			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E016, SKERR_SIRQ_E016MSG);
-		}
-		else {
-			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E017, SKERR_SIRQ_E017MSG);
-		}
-		Para.Para64 = Port;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		
-		Para.Para32[0] = Port;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-
-		return;
-	}
-
-	/* Check whether frames with a size of 1k were sent */
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-		/* Snap statistic counters */
-		(void)SkXmUpdateStats(pAC, IoC, Port);
-		
-		(void)SkXmMacStatistic(pAC, IoC, Port, XM_TXF_MAX_SZ, &TxMax);
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-
-		(void)SkGmMacStatistic(pAC, IoC, Port, GM_TXF_1518B, &TxMax);
-	}
-#endif /* YUKON */
-	
-	if (TxMax > 0) {
-		/* From now on check the parity */
-		pPrt->PCheckPar = SK_TRUE;
-	}
-}	/* SkMacParity */
-
-
-/******************************************************************************
- *
- *	SkGeHwErr() - Hardware Error service routine
- *
- * Description: handles all HW Error interrupts
- *
- * Returns: N/A
- */
-static void SkGeHwErr(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-SK_U32	HwStatus)	/* Interrupt status word */
-{
-	SK_EVPARA	Para;
-	SK_U16		Word;
-
-	if ((HwStatus & (IS_IRQ_MST_ERR | IS_IRQ_STAT)) != 0) {
-		/* PCI Errors occured */
-		if ((HwStatus & IS_IRQ_STAT) != 0) {
-			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E013, SKERR_SIRQ_E013MSG);
-		}
-		else {
-			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E012, SKERR_SIRQ_E012MSG);
-		}
-
-		/* Reset all bits in the PCI STATUS register */
-		SK_IN16(IoC, PCI_C(PCI_STATUS), &Word);
-		
-		SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-        SK_OUT16(IoC, PCI_C(PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS));
-		SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
-
-		Para.Para64 = 0;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
-	}
-
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-
-		if ((HwStatus & IS_NO_STAT_M1) != 0) {
-			/* Ignore it */
-			/* This situation is also indicated in the descriptor */
-			SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INSTAT);
-		}
-
-		if ((HwStatus & IS_NO_STAT_M2) != 0) {
-			/* Ignore it */
-			/* This situation is also indicated in the descriptor */
-			SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INSTAT);
-		}
-
-		if ((HwStatus & IS_NO_TIST_M1) != 0) {
-			/* Ignore it */
-			/* This situation is also indicated in the descriptor */
-			SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INTIST);
-		}
-
-		if ((HwStatus & IS_NO_TIST_M2) != 0) {
-			/* Ignore it */
-			/* This situation is also indicated in the descriptor */
-			SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INTIST);
-		}
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		/* This is necessary only for Rx timing measurements */
-		if ((HwStatus & IS_IRQ_TIST_OV) != 0) {
-			/* increment Time Stamp Timer counter (high) */
-			pAC->GIni.GITimeStampCnt++;
-
-			/* Clear Time Stamp Timer IRQ */
-			SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_CLR_IRQ);
-		}
-
-		if ((HwStatus & IS_IRQ_SENSOR) != 0) {
-			/* no sensors on 32-bit Yukon */
-			if (pAC->GIni.GIYukon32Bit) {
-				/* disable HW Error IRQ */
-				pAC->GIni.GIValIrqMask &= ~IS_HW_ERR;
-			}
-		}
-	}
-#endif /* YUKON */
-
-	if ((HwStatus & IS_RAM_RD_PAR) != 0) {
-		SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_RD_PERR);
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E014, SKERR_SIRQ_E014MSG);
-		Para.Para64 = 0;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
-	}
-
-	if ((HwStatus & IS_RAM_WR_PAR) != 0) {
-		SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_WR_PERR);
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E015, SKERR_SIRQ_E015MSG);
-		Para.Para64 = 0;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
-	}
-
-	if ((HwStatus & IS_M1_PAR_ERR) != 0) {
-		SkMacParity(pAC, IoC, MAC_1);
-	}
-
-	if ((HwStatus & IS_M2_PAR_ERR) != 0) {
-		SkMacParity(pAC, IoC, MAC_2);
-	}
-
-	if ((HwStatus & IS_R1_PAR_ERR) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_P);
-
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E018, SKERR_SIRQ_E018MSG);
-		Para.Para64 = MAC_1;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		
-		Para.Para32[0] = MAC_1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	if ((HwStatus & IS_R2_PAR_ERR) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_P);
-
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E019, SKERR_SIRQ_E019MSG);
-		Para.Para64 = MAC_2;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		
-		Para.Para32[0] = MAC_2;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-}	/* SkGeHwErr */
-
-
-/******************************************************************************
- *
- *	SkGeSirqIsr() - Special Interrupt Service Routine
- *
- * Description: handles all non data transfer specific interrupts (slow path)
- *
- * Returns: N/A
- */
-void SkGeSirqIsr(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-SK_U32	Istatus)	/* Interrupt status word */
-{
-	SK_EVPARA	Para;
-	SK_U32		RegVal32;	/* Read register value */
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	SK_U16 		PhyInt;
-	int			i;
-
-	if (((Istatus & IS_HW_ERR) & pAC->GIni.GIValIrqMask) != 0) {
-		/* read the HW Error Interrupt source */
-		SK_IN32(IoC, B0_HWE_ISRC, &RegVal32);
-		
-		SkGeHwErr(pAC, IoC, RegVal32);
-	}
-
-	/*
-	 * Packet Timeout interrupts
-	 */
-	/* Check whether MACs are correctly initialized */
-	if (((Istatus & (IS_PA_TO_RX1 | IS_PA_TO_TX1)) != 0) &&
-		pAC->GIni.GP[MAC_1].PState == SK_PRT_RESET) {
-		/* MAC 1 was not initialized but Packet timeout occured */
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E004,
-			SKERR_SIRQ_E004MSG);
-	}
-
-	if (((Istatus & (IS_PA_TO_RX2 | IS_PA_TO_TX2)) != 0) &&
-	    pAC->GIni.GP[MAC_2].PState == SK_PRT_RESET) {
-		/* MAC 2 was not initialized but Packet timeout occured */
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E005,
-			SKERR_SIRQ_E005MSG);
-	}
-
-	if ((Istatus & IS_PA_TO_RX1) != 0) {
-		/* Means network is filling us up */
-		SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E002,
-			SKERR_SIRQ_E002MSG);
-		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX1);
-	}
-
-	if ((Istatus & IS_PA_TO_RX2) != 0) {
-		/* Means network is filling us up */
-		SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E003,
-			SKERR_SIRQ_E003MSG);
-		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX2);
-	}
-
-	if ((Istatus & IS_PA_TO_TX1) != 0) {
-		
-		pPrt = &pAC->GIni.GP[0];
-
-		/* May be a normal situation in a server with a slow network */
-		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX1);
-
-#ifdef GENESIS
-		if (pAC->GIni.GIGenesis) {
-			/*
-			 * workaround: if in half duplex mode, check for Tx hangup.
-			 * Read number of TX'ed bytes, wait for 10 ms, then compare
-			 * the number with current value. If nothing changed, we assume
-			 * that Tx is hanging and do a FIFO flush (see event routine).
-			 */
-			if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF ||
-				pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) &&
-				!pPrt->HalfDupTimerActive) {
-				/*
-				 * many more pack. arb. timeouts may come in between,
-				 * we ignore those
-				 */
-				pPrt->HalfDupTimerActive = SK_TRUE;
-				/* Snap statistic counters */
-				(void)SkXmUpdateStats(pAC, IoC, 0);
-
-				(void)SkXmMacStatistic(pAC, IoC, 0, XM_TXO_OK_HI, &RegVal32);
-
-				pPrt->LastOctets = (SK_U64)RegVal32 << 32;
-				
-				(void)SkXmMacStatistic(pAC, IoC, 0, XM_TXO_OK_LO, &RegVal32);
-
-				pPrt->LastOctets += RegVal32;
-				
-				Para.Para32[0] = 0;
-				SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME,
-					SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para);
-			}
-		}
-#endif /* GENESIS */
-	}
-
-	if ((Istatus & IS_PA_TO_TX2) != 0) {
-		
-		pPrt = &pAC->GIni.GP[1];
-
-		/* May be a normal situation in a server with a slow network */
-		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX2);
-
-#ifdef GENESIS
-		if (pAC->GIni.GIGenesis) {
-			/* workaround: see above */
-			if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF ||
-				 pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) &&
-				!pPrt->HalfDupTimerActive) {
-				pPrt->HalfDupTimerActive = SK_TRUE;
-				/* Snap statistic counters */
-				(void)SkXmUpdateStats(pAC, IoC, 1);
-
-				(void)SkXmMacStatistic(pAC, IoC, 1, XM_TXO_OK_HI, &RegVal32);
-
-				pPrt->LastOctets = (SK_U64)RegVal32 << 32;
-				
-				(void)SkXmMacStatistic(pAC, IoC, 1, XM_TXO_OK_LO, &RegVal32);
-
-				pPrt->LastOctets += RegVal32;
-				
-				Para.Para32[0] = 1;
-				SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME,
-					SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para);
-			}
-		}
-#endif /* GENESIS */
-	}
-
-	/* Check interrupts of the particular queues */
-	if ((Istatus & IS_R1_C) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_C);
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E006,
-			SKERR_SIRQ_E006MSG);
-		Para.Para64 = MAC_1;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = MAC_1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	if ((Istatus & IS_R2_C) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_C);
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E007,
-			SKERR_SIRQ_E007MSG);
-		Para.Para64 = MAC_2;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = MAC_2;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	if ((Istatus & IS_XS1_C) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_XS1_CSR, CSR_IRQ_CL_C);
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E008,
-			SKERR_SIRQ_E008MSG);
-		Para.Para64 = MAC_1;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = MAC_1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	if ((Istatus & IS_XA1_C) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_XA1_CSR, CSR_IRQ_CL_C);
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E009,
-			SKERR_SIRQ_E009MSG);
-		Para.Para64 = MAC_1;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = MAC_1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	if ((Istatus & IS_XS2_C) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_XS2_CSR, CSR_IRQ_CL_C);
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E010,
-			SKERR_SIRQ_E010MSG);
-		Para.Para64 = MAC_2;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = MAC_2;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	if ((Istatus & IS_XA2_C) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_XA2_CSR, CSR_IRQ_CL_C);
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E011,
-			SKERR_SIRQ_E011MSG);
-		Para.Para64 = MAC_2;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = MAC_2;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	/* External reg interrupt */
-	if ((Istatus & IS_EXT_REG) != 0) {
-		/* Test IRQs from PHY */
-		for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-			
-			pPrt = &pAC->GIni.GP[i];
-			
-			if (pPrt->PState == SK_PRT_RESET) {
-				continue;
-			}
-			
-#ifdef GENESIS
-			if (pAC->GIni.GIGenesis) {
-				
-				switch (pPrt->PhyType) {
-				
-				case SK_PHY_XMAC:
-					break;
-				
-				case SK_PHY_BCOM:
-					SkXmPhyRead(pAC, IoC, i, PHY_BCOM_INT_STAT, &PhyInt);
-	
-					if ((PhyInt & ~PHY_B_DEF_MSK) != 0) {
-						SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-							("Port %d Bcom Int: 0x%04X\n",
-							i, PhyInt));
-						SkPhyIsrBcom(pAC, IoC, i, PhyInt);
-					}
-					break;
-#ifdef OTHER_PHY
-				case SK_PHY_LONE:
-					SkXmPhyRead(pAC, IoC, i, PHY_LONE_INT_STAT, &PhyInt);
-					
-					if ((PhyInt & PHY_L_DEF_MSK) != 0) {
-						SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-							("Port %d Lone Int: %x\n",
-							i, PhyInt));
-						SkPhyIsrLone(pAC, IoC, i, PhyInt);
-					}
-					break;
-#endif /* OTHER_PHY */
-				}
-			}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-			if (pAC->GIni.GIYukon) {
-				/* Read PHY Interrupt Status */
-				SkGmPhyRead(pAC, IoC, i, PHY_MARV_INT_STAT, &PhyInt);
-
-				if ((PhyInt & PHY_M_DEF_MSK) != 0) {
-					SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-						("Port %d Marv Int: 0x%04X\n",
-						i, PhyInt));
-					SkPhyIsrGmac(pAC, IoC, i, PhyInt);
-				}
-			}
-#endif /* YUKON */
-		}
-	}
-
-	/* I2C Ready interrupt */
-	if ((Istatus & IS_I2C_READY) != 0) {
-#ifdef SK_SLIM
-        SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ);
-#else		
-		SkI2cIsr(pAC, IoC);
-#endif		
-	}
-
-	/* SW forced interrupt */
-	if ((Istatus & IS_IRQ_SW) != 0) {
-		/* clear the software IRQ */
-		SK_OUT8(IoC, B0_CTST, CS_CL_SW_IRQ);
-	}
-
-	if ((Istatus & IS_LNK_SYNC_M1) != 0) {
-		/*
-		 * We do NOT need the Link Sync interrupt, because it shows
-		 * us only a link going down.
-		 */
-		/* clear interrupt */
-		SK_OUT8(IoC, MR_ADDR(MAC_1, LNK_SYNC_CTRL), LED_CLR_IRQ);
-	}
-
-	/* Check MAC after link sync counter */
-	if ((Istatus & IS_MAC1) != 0) {
-		/* IRQ from MAC 1 */
-		SkMacIrq(pAC, IoC, MAC_1);
-	}
-
-	if ((Istatus & IS_LNK_SYNC_M2) != 0) {
-		/*
-		 * We do NOT need the Link Sync interrupt, because it shows
-		 * us only a link going down.
-		 */
-		/* clear interrupt */
-		SK_OUT8(IoC, MR_ADDR(MAC_2, LNK_SYNC_CTRL), LED_CLR_IRQ);
-	}
-
-	/* Check MAC after link sync counter */
-	if ((Istatus & IS_MAC2) != 0) {
-		/* IRQ from MAC 2 */
-		SkMacIrq(pAC, IoC, MAC_2);
-	}
-
-	/* Timer interrupt (served last) */
-	if ((Istatus & IS_TIMINT) != 0) {
-		/* check for HW Errors */
-		if (((Istatus & IS_HW_ERR) & ~pAC->GIni.GIValIrqMask) != 0) {
-			/* read the HW Error Interrupt source */
-			SK_IN32(IoC, B0_HWE_ISRC, &RegVal32);
-
-			SkGeHwErr(pAC, IoC, RegVal32);
-		}
-
-		SkHwtIsr(pAC, IoC);
-	}
-
-}	/* SkGeSirqIsr */
-
-
-#ifdef GENESIS
-/******************************************************************************
- *
- * SkGePortCheckShorts() - Implementing XMAC Workaround Errata # 2
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- */
-static int SkGePortCheckShorts(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		Port)		/* Which port should be checked */
-{
-	SK_U32		Shorts;			/* Short Event Counter */
-	SK_U32		CheckShorts;	/* Check value for Short Event Counter */
-	SK_U64		RxCts;			/* Rx Counter (packets on network) */
-	SK_U32		RxTmp;			/* Rx temp. Counter */
-	SK_U32		FcsErrCts;		/* FCS Error Counter */
-	SK_GEPORT	*pPrt;			/* GIni Port struct pointer */
-	int			Rtv;			/* Return value */
-	int			i;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* Default: no action */
-	Rtv = SK_HW_PS_NONE;
-
-	(void)SkXmUpdateStats(pAC, IoC, Port);
-
-	/* Extra precaution: check for short Event counter */
-	(void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts);
-
-	/*
-	 * Read Rx counters (packets seen on the network and not necessarily
-	 * really received.
-	 */
-	RxCts = 0;
-
-	for (i = 0; i < sizeof(SkGeRxRegs)/sizeof(SkGeRxRegs[0]); i++) {
-		
-		(void)SkXmMacStatistic(pAC, IoC, Port, SkGeRxRegs[i], &RxTmp);
-		
-		RxCts += (SK_U64)RxTmp;
-	}
-
-	/* On default: check shorts against zero */
-	CheckShorts = 0;
-
-	/* Extra precaution on active links */
-	if (pPrt->PHWLinkUp) {
-		/* Reset Link Restart counter */
-		pPrt->PLinkResCt = 0;
-		pPrt->PAutoNegTOCt = 0;
-
-		/* If link is up check for 2 */
-		CheckShorts = 2;
-
-		(void)SkXmMacStatistic(pAC, IoC, Port, XM_RXF_FCS_ERR, &FcsErrCts);
-		
-		if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
-		    pPrt->PLipaAutoNeg == SK_LIPA_UNKNOWN &&
-		    (pPrt->PLinkMode == SK_LMODE_HALF ||
-			 pPrt->PLinkMode == SK_LMODE_FULL)) {
-			/*
-			 * This is autosensing and we are in the fallback
-			 * manual full/half duplex mode.
-			 */
-			if (RxCts == pPrt->PPrevRx) {
-				/* Nothing received, restart link */
-				pPrt->PPrevFcs = FcsErrCts;
-				pPrt->PPrevShorts = Shorts;
-				
-				return(SK_HW_PS_RESTART);
-			}
-			else {
-				pPrt->PLipaAutoNeg = SK_LIPA_MANUAL;
-			}
-		}
-
-		if (((RxCts - pPrt->PPrevRx) > pPrt->PRxLim) ||
-		    (!(FcsErrCts - pPrt->PPrevFcs))) {
-			/*
-			 * Note: The compare with zero above has to be done the way shown,
-			 * otherwise the Linux driver will have a problem.
-			 */
-			/*
-			 * We received a bunch of frames or no CRC error occured on the
-			 * network -> ok.
-			 */
-			pPrt->PPrevRx = RxCts;
-			pPrt->PPrevFcs = FcsErrCts;
-			pPrt->PPrevShorts = Shorts;
-
-			return(SK_HW_PS_NONE);
-		}
-
-		pPrt->PPrevFcs = FcsErrCts;
-	}
-
-
-	if ((Shorts - pPrt->PPrevShorts) > CheckShorts) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-			("Short Event Count Restart Port %d \n", Port));
-		Rtv = SK_HW_PS_RESTART;
-	}
-
-	pPrt->PPrevShorts = Shorts;
-	pPrt->PPrevRx = RxCts;
-
-	return(Rtv);
-}	/* SkGePortCheckShorts */
-#endif /* GENESIS */
-
-
-/******************************************************************************
- *
- * SkGePortCheckUp() - Check if the link is up
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- *	2	Link came up
- */
-static int SkGePortCheckUp(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		Port)		/* Which port should be checked */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	SK_BOOL		AutoNeg;	/* Is Auto-negotiation used ? */
-	int			Rtv;		/* Return value */
-
-	Rtv = SK_HW_PS_NONE;
-	
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
-		AutoNeg = SK_FALSE;
-	}
-	else {
-		AutoNeg = SK_TRUE;
-	}
-
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-
-		switch (pPrt->PhyType) {
-		
-		case SK_PHY_XMAC:
-			Rtv = SkGePortCheckUpXmac(pAC, IoC, Port, AutoNeg);
-			break;
-		case SK_PHY_BCOM:
-			Rtv = SkGePortCheckUpBcom(pAC, IoC, Port, AutoNeg);
-			break;
-#ifdef OTHER_PHY
-		case SK_PHY_LONE:
-			Rtv = SkGePortCheckUpLone(pAC, IoC, Port, AutoNeg);
-			break;
-		case SK_PHY_NAT:
-			Rtv = SkGePortCheckUpNat(pAC, IoC, Port, AutoNeg);
-			break;
-#endif /* OTHER_PHY */
-		}
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		
-		Rtv = SkGePortCheckUpGmac(pAC, IoC, Port, AutoNeg);
-	}
-#endif /* YUKON */
-
-	return(Rtv);	
-}	/* SkGePortCheckUp */
-
-
-#ifdef GENESIS
-/******************************************************************************
- *
- * SkGePortCheckUpXmac() - Implementing of the Workaround Errata # 2
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- *	2	Link came up
- */
-static int SkGePortCheckUpXmac(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		Port,		/* Which port should be checked */
-SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
-{
-	SK_U32		Shorts;		/* Short Event Counter */
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	int			Done;
-	SK_U32		GpReg;		/* General Purpose register value */
-	SK_U16		Isrc;		/* Interrupt source register */
-	SK_U16		IsrcSum;	/* Interrupt source register sum */
-	SK_U16		LpAb;		/* Link Partner Ability */
-	SK_U16		ResAb;		/* Resolved Ability */
-	SK_U16		ExtStat;	/* Extended Status Register */
-	SK_U8		NextMode;	/* Next AutoSensing Mode */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (pPrt->PHWLinkUp) {
-		if (pPrt->PhyType != SK_PHY_XMAC) {
-			return(SK_HW_PS_NONE);
-		}
-		else {
-			return(SkGePortCheckShorts(pAC, IoC, Port));
-		}
-	}
-
-	IsrcSum = pPrt->PIsave;
-	pPrt->PIsave = 0;
-
-	/* Now wait for each port's link */
-	if (pPrt->PLinkBroken) {
-		/* Link was broken */
-		XM_IN32(IoC, Port, XM_GP_PORT, &GpReg);
-
-		if ((GpReg & XM_GP_INP_ASS) == 0) {
-			/* The Link is in sync */
-			XM_IN16(IoC, Port, XM_ISRC, &Isrc);
-			IsrcSum |= Isrc;
-			SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum);
-			
-			if ((Isrc & XM_IS_INP_ASS) == 0) {
-				/* It has been in sync since last time */
-				/* Restart the PORT */
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-					("Link in sync Restart Port %d\n", Port));
-
-				(void)SkXmUpdateStats(pAC, IoC, Port);
-
-				/* We now need to reinitialize the PrevShorts counter */
-				(void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts);
-				pPrt->PPrevShorts = Shorts;
-
-				pPrt->PLinkBroken = SK_FALSE;
-
-				/*
-				 * Link Restart Workaround:
-				 *  it may be possible that the other Link side
-				 *  restarts its link as well an we detect
-				 *  another LinkBroken. To prevent this
-				 *  happening we check for a maximum number
-				 *  of consecutive restart. If those happens,
-				 *  we do NOT restart the active link and
-				 *  check whether the link is now o.k.
-				 */
-				pPrt->PLinkResCt++;
-				
-				pPrt->PAutoNegTimeOut = 0;
-
-				if (pPrt->PLinkResCt < SK_MAX_LRESTART) {
-					return(SK_HW_PS_RESTART);
-				}
-
-				pPrt->PLinkResCt = 0;
-				
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-					("Do NOT restart on Port %d %x %x\n", Port, Isrc, IsrcSum));
-			}
-			else {
-				pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND);
-				
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-					("Save Sync/nosync Port %d %x %x\n", Port, Isrc, IsrcSum));
-
-				/* Do nothing more if link is broken */
-				return(SK_HW_PS_NONE);
-			}
-		}
-		else {
-			/* Do nothing more if link is broken */
-			return(SK_HW_PS_NONE);
-		}
-
-	}
-	else {
-		/* Link was not broken, check if it is */
-		XM_IN16(IoC, Port, XM_ISRC, &Isrc);
-		IsrcSum |= Isrc;
-		if ((Isrc & XM_IS_INP_ASS) != 0) {
-			XM_IN16(IoC, Port, XM_ISRC, &Isrc);
-			IsrcSum |= Isrc;
-			if ((Isrc & XM_IS_INP_ASS) != 0) {
-				XM_IN16(IoC, Port, XM_ISRC, &Isrc);
-				IsrcSum |= Isrc;
-				if ((Isrc & XM_IS_INP_ASS) != 0) {
-					pPrt->PLinkBroken = SK_TRUE;
-					/* Re-Init Link partner Autoneg flag */
-					pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN;
-					SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-						("Link broken Port %d\n", Port));
-
-					/* Cable removed-> reinit sense mode */
-					SkHWInitDefSense(pAC, IoC, Port);
-
-					return(SK_HW_PS_RESTART);
-				}
-			}
-		}
-		else {
-			SkXmAutoNegLipaXmac(pAC, IoC, Port, Isrc);
-			
-			if (SkGePortCheckShorts(pAC, IoC, Port) == SK_HW_PS_RESTART) {
-				return(SK_HW_PS_RESTART);
-			}
-		}
-	}
-
-	/*
-	 * here we usually can check whether the link is in sync and
-	 * auto-negotiation is done.
-	 */
-	XM_IN32(IoC, Port, XM_GP_PORT, &GpReg);
-	XM_IN16(IoC, Port, XM_ISRC, &Isrc);
-	IsrcSum |= Isrc;
-
-	SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum);
-	
-	if ((GpReg & XM_GP_INP_ASS) != 0 || (IsrcSum & XM_IS_INP_ASS) != 0) {
-		if ((GpReg & XM_GP_INP_ASS) == 0) {
-			/* Save Auto-negotiation Done interrupt only if link is in sync */
-			pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND);
-		}
-#ifdef DEBUG
-		if ((pPrt->PIsave & XM_IS_AND) != 0) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("AutoNeg done rescheduled Port %d\n", Port));
-		}
-#endif /* DEBUG */
-		return(SK_HW_PS_NONE);
-	}
-
-	if (AutoNeg) {
-		if ((IsrcSum & XM_IS_AND) != 0) {
-			SkHWLinkUp(pAC, IoC, Port);
-			Done = SkMacAutoNegDone(pAC, IoC, Port);
-			if (Done != SK_AND_OK) {
-				/* Get PHY parameters, for debugging only */
-				SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_LP, &LpAb);
-				SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_RES_ABI, &ResAb);
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-					("AutoNeg FAIL Port %d (LpAb %x, ResAb %x)\n",
-					 Port, LpAb, ResAb));
-					
-				/* Try next possible mode */
-				NextMode = SkHWSenseGetNext(pAC, IoC, Port);
-				SkHWLinkDown(pAC, IoC, Port);
-				if (Done == SK_AND_DUP_CAP) {
-					/* GoTo next mode */
-					SkHWSenseSetNext(pAC, IoC, Port, NextMode);
-				}
-
-				return(SK_HW_PS_RESTART);
-			}
-			/*
-			 * Dummy Read extended status to prevent extra link down/ups
-			 * (clear Page Received bit if set)
-			 */
-			SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_EXP, &ExtStat);
-			
-			return(SK_HW_PS_LINK);
-		}
-		
-		/* AutoNeg not done, but HW link is up. Check for timeouts */
-		pPrt->PAutoNegTimeOut++;
-		if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) {
-			/* Increase the Timeout counter */
-			pPrt->PAutoNegTOCt++;
-
-			/* Timeout occured */
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-				("AutoNeg timeout Port %d\n", Port));
-			if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
-				pPrt->PLipaAutoNeg != SK_LIPA_AUTO) {
-				/* Set Link manually up */
-				SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL);
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-					("Set manual full duplex Port %d\n", Port));
-			}
-
-			if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
-				pPrt->PLipaAutoNeg == SK_LIPA_AUTO &&
-				pPrt->PAutoNegTOCt >= SK_MAX_ANEG_TO) {
-				/*
-				 * This is rather complicated.
-				 * we need to check here whether the LIPA_AUTO
-				 * we saw before is false alert. We saw at one
-				 * switch ( SR8800) that on boot time it sends
-				 * just one auto-neg packet and does no further
-				 * auto-negotiation.
-				 * Solution: we restart the autosensing after
-				 * a few timeouts.
-				 */
-				pPrt->PAutoNegTOCt = 0;
-				pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN;
-				SkHWInitDefSense(pAC, IoC, Port);
-			}
-
-			/* Do the restart */
-			return(SK_HW_PS_RESTART);
-		}
-	}
-	else {
-		/* Link is up and we don't need more */
-#ifdef DEBUG
-		if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("ERROR: Lipa auto detected on port %d\n", Port));
-		}
-#endif /* DEBUG */
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-			("Link sync(GP), Port %d\n", Port));
-		SkHWLinkUp(pAC, IoC, Port);
-		
-		/*
-		 * Link sync (GP) and so assume a good connection. But if not received
-		 * a bunch of frames received in a time slot (maybe broken tx cable)
-		 * the port is restart.
-		 */
-		return(SK_HW_PS_LINK);
-	}
-
-	return(SK_HW_PS_NONE);
-}	/* SkGePortCheckUpXmac */
-
-
-/******************************************************************************
- *
- * SkGePortCheckUpBcom() - Check if the link is up on Bcom PHY
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- *	2	Link came up
- */
-static int SkGePortCheckUpBcom(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		Port,		/* Which port should be checked */
-SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	int			Done;
-	SK_U16		Isrc;		/* Interrupt source register */
-	SK_U16		PhyStat;	/* Phy Status Register */
-	SK_U16		ResAb;		/* Master/Slave resolution */
-	SK_U16		Ctrl;		/* Broadcom control flags */
-#ifdef DEBUG
-	SK_U16		LpAb;
-	SK_U16		ExtStat;
-#endif /* DEBUG */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* Check for No HCD Link events (#10523) */
-	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &Isrc);
-
-#ifdef xDEBUG
-	if ((Isrc & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) ==
-		(PHY_B_IS_SCR_S_ER | PHY_B_IS_RRS_CHANGE | PHY_B_IS_LRS_CHANGE)) {
-
-		SK_U32	Stat1, Stat2, Stat3;
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_MASK, &Stat1);
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"CheckUp1 - Stat: %x, Mask: %x",
-			(void *)Isrc,
-			(void *)Stat1);
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Stat1);
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &Stat2);
-		Stat1 = Stat1 << 16 | Stat2;
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, &Stat2);
-		Stat3 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &Stat3);
-		Stat2 = Stat2 << 16 | Stat3;
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"Ctrl/Stat: %x, AN Adv/LP: %x",
-			(void *)Stat1,
-			(void *)Stat2);
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_EXP, &Stat1);
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_EXT_STAT, &Stat2);
-		Stat1 = Stat1 << 16 | Stat2;
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, &Stat2);
-		Stat3 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &Stat3);
-		Stat2 = Stat2 << 16 | Stat3;
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"AN Exp/IEEE Ext: %x, 1000T Ctrl/Stat: %x",
-			(void *)Stat1,
-			(void *)Stat2);
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, &Stat1);
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_STAT, &Stat2);
-		Stat1 = Stat1 << 16 | Stat2;
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Stat2);
-		Stat3 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &Stat3);
-		Stat2 = Stat2 << 16 | Stat3;
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"PHY Ext Ctrl/Stat: %x, Aux Ctrl/Stat: %x",
-			(void *)Stat1,
-			(void *)Stat2);
-	}
-#endif /* DEBUG */
-
-	if ((Isrc & (PHY_B_IS_NO_HDCL /* | PHY_B_IS_NO_HDC */)) != 0) {
-		/*
-		 * Workaround BCom Errata:
-		 *	enable and disable loopback mode if "NO HCD" occurs.
-		 */
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Ctrl);
-		SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL,
-			(SK_U16)(Ctrl | PHY_CT_LOOP));
-		SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL,
-			(SK_U16)(Ctrl & ~PHY_CT_LOOP));
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("No HCD Link event, Port %d\n", Port));
-#ifdef xDEBUG
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"No HCD link event, port %d.",
-			(void *)Port,
-			(void *)NULL);
-#endif /* DEBUG */
-	}
-
-	/* Not obsolete: link status bit is latched to 0 and autoclearing! */
-	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat);
-
-	if (pPrt->PHWLinkUp) {
-		return(SK_HW_PS_NONE);
-	}
-
-#ifdef xDEBUG
-	{
-		SK_U32	Stat1, Stat2, Stat3;
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_MASK, &Stat1);
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"CheckUp1a - Stat: %x, Mask: %x",
-			(void *)Isrc,
-			(void *)Stat1);
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Stat1);
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat);
-		Stat1 = Stat1 << 16 | PhyStat;
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, &Stat2);
-		Stat3 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &Stat3);
-		Stat2 = Stat2 << 16 | Stat3;
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"Ctrl/Stat: %x, AN Adv/LP: %x",
-			(void *)Stat1,
-			(void *)Stat2);
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_EXP, &Stat1);
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_EXT_STAT, &Stat2);
-		Stat1 = Stat1 << 16 | Stat2;
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, &Stat2);
-		Stat3 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb);
-		Stat2 = Stat2 << 16 | ResAb;
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"AN Exp/IEEE Ext: %x, 1000T Ctrl/Stat: %x",
-			(void *)Stat1,
-			(void *)Stat2);
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, &Stat1);
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_STAT, &Stat2);
-		Stat1 = Stat1 << 16 | Stat2;
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Stat2);
-		Stat3 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &Stat3);
-		Stat2 = Stat2 << 16 | Stat3;
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"PHY Ext Ctrl/Stat: %x, Aux Ctrl/Stat: %x",
-			(void *)Stat1,
-			(void *)Stat2);
-	}
-#endif /* DEBUG */
-
-	/*
-	 * Here we usually can check whether the link is in sync and
-	 * auto-negotiation is done.
-	 */
-
-	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat);
-
-	SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat);
-	
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("CheckUp Port %d, PhyStat: 0x%04X\n", Port, PhyStat));
-
-	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb);
-
-	if ((ResAb & PHY_B_1000S_MSF) != 0) {
-		/* Error */
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("Master/Slave Fault port %d\n", Port));
-		
-		pPrt->PAutoNegFail = SK_TRUE;
-		pPrt->PMSStatus = SK_MS_STAT_FAULT;
-		
-		return(SK_HW_PS_RESTART);
-	}
-
-	if ((PhyStat & PHY_ST_LSYNC) == 0) {
-		return(SK_HW_PS_NONE);
-	}
-	
-	pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ?
-		SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE;
-	
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("Port %d, ResAb: 0x%04X\n", Port, ResAb));
-
-	if (AutoNeg) {
-		if ((PhyStat & PHY_ST_AN_OVER) != 0) {
-			
-			SkHWLinkUp(pAC, IoC, Port);
-			
-			Done = SkMacAutoNegDone(pAC, IoC, Port);
-			
-			if (Done != SK_AND_OK) {
-#ifdef DEBUG
-				/* Get PHY parameters, for debugging only */
-				SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &LpAb);
-				SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ExtStat);
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-					("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n",
-					Port, LpAb, ExtStat));
-#endif /* DEBUG */
-				return(SK_HW_PS_RESTART);
-			}
-			else {
-#ifdef xDEBUG
-				/* Dummy read ISR to prevent extra link downs/ups */
-				SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &ExtStat);
-
-				if ((ExtStat & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) != 0) {
-					CMSMPrintString(
-						pAC->pConfigTable,
-						MSG_TYPE_RUNTIME_INFO,
-						"CheckUp2 - Stat: %x",
-						(void *)ExtStat,
-						(void *)NULL);
-				}
-#endif /* DEBUG */
-				return(SK_HW_PS_LINK);
-			}
-		}
-	}
-	else {	/* !AutoNeg */
-		/* Link is up and we don't need more. */
-#ifdef DEBUG
-		if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("ERROR: Lipa auto detected on port %d\n", Port));
-		}
-#endif /* DEBUG */
-
-#ifdef xDEBUG
-		/* Dummy read ISR to prevent extra link downs/ups */
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &ExtStat);
-
-		if ((ExtStat & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) != 0) {
-			CMSMPrintString(
-				pAC->pConfigTable,
-				MSG_TYPE_RUNTIME_INFO,
-				"CheckUp3 - Stat: %x",
-				(void *)ExtStat,
-				(void *)NULL);
-		}
-#endif /* DEBUG */
-		
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-			("Link sync(GP), Port %d\n", Port));
-		SkHWLinkUp(pAC, IoC, Port);
-		
-		return(SK_HW_PS_LINK);
-	}
-
-	return(SK_HW_PS_NONE);
-}	/* SkGePortCheckUpBcom */
-#endif /* GENESIS */
-
-
-#ifdef YUKON
-/******************************************************************************
- *
- * SkGePortCheckUpGmac() - Check if the link is up on Marvell PHY
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- *	2	Link came up
- */
-static int SkGePortCheckUpGmac(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		Port,		/* Which port should be checked */
-SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	int			Done;
-	SK_U16		PhyIsrc;	/* PHY Interrupt source */
-	SK_U16		PhyStat;	/* PPY Status */
-	SK_U16		PhySpecStat;/* PHY Specific Status */
-	SK_U16		ResAb;		/* Master/Slave resolution */
-	SK_EVPARA	Para;
-#ifdef DEBUG
-	SK_U16		Word;		/* I/O helper */
-#endif /* DEBUG */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (pPrt->PHWLinkUp) {
-		return(SK_HW_PS_NONE);
-	}
-
-	/* Read PHY Status */
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat);
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("CheckUp Port %d, PhyStat: 0x%04X\n", Port, PhyStat));
-
-	/* Read PHY Interrupt Status */
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_INT_STAT, &PhyIsrc);
-
-	if ((PhyIsrc & PHY_M_IS_AN_COMPL) != 0) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("Auto-Negotiation Completed, PhyIsrc: 0x%04X\n", PhyIsrc));
-	}
-
-	if ((PhyIsrc & PHY_M_IS_LSP_CHANGE) != 0) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("Link Speed Changed, PhyIsrc: 0x%04X\n", PhyIsrc));
-	}
-
-	SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat);
-	
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb);
-
-	if ((ResAb & PHY_B_1000S_MSF) != 0) {
-		/* Error */
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("Master/Slave Fault port %d\n", Port));
-		
-		pPrt->PAutoNegFail = SK_TRUE;
-		pPrt->PMSStatus = SK_MS_STAT_FAULT;
-		
-		return(SK_HW_PS_RESTART);
-	}
-
-	/* Read PHY Specific Status */
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat);
-	
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("Phy1000BT: 0x%04X, PhySpecStat: 0x%04X\n", ResAb, PhySpecStat));
-
-#ifdef DEBUG
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_EXP, &Word);
-
-	if ((PhyIsrc & PHY_M_IS_AN_PR) != 0 || (Word & PHY_ANE_RX_PG) != 0 ||
-		(PhySpecStat & PHY_M_PS_PAGE_REC) != 0)  {
-		/* Read PHY Next Page Link Partner */
-		SkGmPhyRead(pAC, IoC, Port, PHY_MARV_NEPG_LP, &Word);
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("Page Received, NextPage: 0x%04X\n", Word));
-	}
-#endif /* DEBUG */
-
-	if ((PhySpecStat & PHY_M_PS_LINK_UP) == 0) {
-		return(SK_HW_PS_NONE);
-	}
-	
-	if ((PhySpecStat & PHY_M_PS_DOWNS_STAT) != 0 ||
-		(PhyIsrc & PHY_M_IS_DOWNSH_DET) != 0) {
-		/* Downshift detected */
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E025, SKERR_SIRQ_E025MSG);
-		
-		Para.Para64 = Port;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_DOWNSHIFT_DET, Para);
-		
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("Downshift detected, PhyIsrc: 0x%04X\n", PhyIsrc));
-	}
-
-	pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ?
-		SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE;
-	
-	pPrt->PCableLen = (SK_U8)((PhySpecStat & PHY_M_PS_CABLE_MSK) >> 7);
-	
-	if (AutoNeg) {
-		/* Auto-Negotiation Over ? */
-		if ((PhyStat & PHY_ST_AN_OVER) != 0) {
-			
-			SkHWLinkUp(pAC, IoC, Port);
-			
-			Done = SkMacAutoNegDone(pAC, IoC, Port);
-			
-			if (Done != SK_AND_OK) {
-				return(SK_HW_PS_RESTART);
-			}
-			
-			return(SK_HW_PS_LINK);
-		}
-	}
-	else {	/* !AutoNeg */
-		/* Link is up and we don't need more */
-#ifdef DEBUG
-		if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("ERROR: Lipa auto detected on port %d\n", Port));
-		}
-#endif /* DEBUG */
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-			("Link sync, Port %d\n", Port));
-		SkHWLinkUp(pAC, IoC, Port);
-		
-		return(SK_HW_PS_LINK);
-	}
-
-	return(SK_HW_PS_NONE);
-}	/* SkGePortCheckUpGmac */
-#endif /* YUKON */
-
-
-#ifdef OTHER_PHY
-/******************************************************************************
- *
- * SkGePortCheckUpLone() - Check if the link is up on Level One PHY
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- *	2	Link came up
- */
-static int SkGePortCheckUpLone(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		Port,		/* Which port should be checked */
-SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	int			Done;
-	SK_U16		Isrc;		/* Interrupt source register */
-	SK_U16		LpAb;		/* Link Partner Ability */
-	SK_U16		ExtStat;	/* Extended Status Register */
-	SK_U16		PhyStat;	/* Phy Status Register */
-	SK_U16		StatSum;
-	SK_U8		NextMode;	/* Next AutoSensing Mode */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (pPrt->PHWLinkUp) {
-		return(SK_HW_PS_NONE);
-	}
-
-	StatSum = pPrt->PIsave;
-	pPrt->PIsave = 0;
-
-	/*
-	 * here we usually can check whether the link is in sync and
-	 * auto-negotiation is done.
-	 */
-	SkXmPhyRead(pAC, IoC, Port, PHY_LONE_STAT, &PhyStat);
-	StatSum |= PhyStat;
-
-	SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat);
-	
-	if ((PhyStat & PHY_ST_LSYNC) == 0) {
-		/* Save Auto-negotiation Done bit */
-		pPrt->PIsave = (SK_U16)(StatSum & PHY_ST_AN_OVER);
-#ifdef DEBUG
-		if ((pPrt->PIsave & PHY_ST_AN_OVER) != 0) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("AutoNeg done rescheduled Port %d\n", Port));
-		}
-#endif /* DEBUG */
-		return(SK_HW_PS_NONE);
-	}
-
-	if (AutoNeg) {
-		if ((StatSum & PHY_ST_AN_OVER) != 0) {
-			SkHWLinkUp(pAC, IoC, Port);
-			Done = SkMacAutoNegDone(pAC, IoC, Port);
-			if (Done != SK_AND_OK) {
-				/* Get PHY parameters, for debugging only */
-				SkXmPhyRead(pAC, IoC, Port, PHY_LONE_AUNE_LP, &LpAb);
-				SkXmPhyRead(pAC, IoC, Port, PHY_LONE_1000T_STAT, &ExtStat);
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-					("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n",
-					 Port, LpAb, ExtStat));
-					
-				/* Try next possible mode */
-				NextMode = SkHWSenseGetNext(pAC, IoC, Port);
-				SkHWLinkDown(pAC, IoC, Port);
-				if (Done == SK_AND_DUP_CAP) {
-					/* GoTo next mode */
-					SkHWSenseSetNext(pAC, IoC, Port, NextMode);
-				}
-
-				return(SK_HW_PS_RESTART);
-
-			}
-			else {
-				/*
-				 * Dummy Read interrupt status to prevent
-				 * extra link down/ups
-				 */
-				SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat);
-				return(SK_HW_PS_LINK);
-			}
-		}
-		
-		/* AutoNeg not done, but HW link is up. Check for timeouts */
-		pPrt->PAutoNegTimeOut++;
-		if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) {
-			/* Timeout occured */
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-				("AutoNeg timeout Port %d\n", Port));
-			if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
-				pPrt->PLipaAutoNeg != SK_LIPA_AUTO) {
-				/* Set Link manually up */
-				SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL);
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-					("Set manual full duplex Port %d\n", Port));
-			}
-
-			/* Do the restart */
-			return(SK_HW_PS_RESTART);
-		}
-	}
-	else {
-		/* Link is up and we don't need more */
-#ifdef DEBUG
-		if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("ERROR: Lipa auto detected on port %d\n", Port));
-		}
-#endif /* DEBUG */
-
-		/*
-		 * Dummy Read interrupt status to prevent
-		 * extra link down/ups
-		 */
-		SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat);
-		
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-			("Link sync(GP), Port %d\n", Port));
-		SkHWLinkUp(pAC, IoC, Port);
-		
-		return(SK_HW_PS_LINK);
-	}
-
-	return(SK_HW_PS_NONE);
-}	/* SkGePortCheckUpLone */
-
-
-/******************************************************************************
- *
- * SkGePortCheckUpNat() - Check if the link is up on National PHY
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- *	2	Link came up
- */
-static int SkGePortCheckUpNat(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		Port,		/* Which port should be checked */
-SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
-{
-	/* todo: National */
-	return(SK_HW_PS_NONE);
-}	/* SkGePortCheckUpNat */
-#endif /* OTHER_PHY */
-
-
-/******************************************************************************
- *
- *	SkGeSirqEvent() - Event Service Routine
- *
- * Description:
- *
- * Notes:
- */
-int	SkGeSirqEvent(
-SK_AC		*pAC,		/* Adapter Context */
-SK_IOC		IoC,		/* Io Context */
-SK_U32		Event,		/* Module specific Event */
-SK_EVPARA	Para)		/* Event specific Parameter */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	SK_U32		Port;
-	SK_U32		Val32;
-	int			PortStat;
-	SK_U8		Val8;
-#ifdef GENESIS
-	SK_U64		Octets;
-#endif /* GENESIS */
-
-	Port = Para.Para32[0];
-	pPrt = &pAC->GIni.GP[Port];
-
-	switch (Event) {
-	case SK_HWEV_WATIM:
-		if (pPrt->PState == SK_PRT_RESET) {
-		
-			PortStat = SK_HW_PS_NONE;
-		}
-		else {
-			/* Check whether port came up */
-			PortStat = SkGePortCheckUp(pAC, IoC, (int)Port);
-		}
-
-		switch (PortStat) {
-		case SK_HW_PS_RESTART:
-			if (pPrt->PHWLinkUp) {
-				/* Set Link to down */
-				SkHWLinkDown(pAC, IoC, (int)Port);
-
-				/*
-				 * Signal directly to RLMT to ensure correct
-				 * sequence of SWITCH and RESET event.
-				 */
-				SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);
-			}
-
-			/* Restart needed */
-			SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para);
-			break;
-
-		case SK_HW_PS_LINK:
-			/* Signal to RLMT */
-			SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_UP, Para);
-			break;
-		}
-		
-		/* Start again the check Timer */
-		if (pPrt->PHWLinkUp) {
-			Val32 = SK_WA_ACT_TIME;
-		}
-		else {
-			Val32 = SK_WA_INA_TIME;
-		}
-
-		/* Todo: still needed for non-XMAC PHYs??? */
-		/* Start workaround Errata #2 timer */
-		SkTimerStart(pAC, IoC, &pPrt->PWaTimer, Val32,
-			SKGE_HWAC, SK_HWEV_WATIM, Para);
-		break;
-
-	case SK_HWEV_PORT_START:
-		if (pPrt->PHWLinkUp) {
-			/*
-			 * Signal directly to RLMT to ensure correct
-			 * sequence of SWITCH and RESET event.
-			 */
-			SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);
-		}
-
-		SkHWLinkDown(pAC, IoC, (int)Port);
-
-		/* Schedule Port RESET */
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para);
-
-		/* Start workaround Errata #2 timer */
-		SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME,
-			SKGE_HWAC, SK_HWEV_WATIM, Para);
-		break;
-
-	case SK_HWEV_PORT_STOP:
-		if (pPrt->PHWLinkUp) {
-			/*
-			 * Signal directly to RLMT to ensure correct
-			 * sequence of SWITCH and RESET event.
-			 */
-			SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);
-		}
-
-		/* Stop Workaround Timer */
-		SkTimerStop(pAC, IoC, &pPrt->PWaTimer);
-
-		SkHWLinkDown(pAC, IoC, (int)Port);
-		break;
-
-	case SK_HWEV_UPDATE_STAT:
-		/* We do NOT need to update any statistics */
-		break;
-
-	case SK_HWEV_CLEAR_STAT:
-		/* We do NOT need to clear any statistics */
-		for (Port = 0; Port < (SK_U32)pAC->GIni.GIMacsFound; Port++) {
-			pPrt->PPrevRx = 0;
-			pPrt->PPrevFcs = 0;
-			pPrt->PPrevShorts = 0;
-		}
-		break;
-
-	case SK_HWEV_SET_LMODE:
-		Val8 = (SK_U8)Para.Para32[1];
-		if (pPrt->PLinkModeConf != Val8) {
-			/* Set New link mode */
-			pPrt->PLinkModeConf = Val8;
-
-			/* Restart Port */
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
-		}
-		break;
-
-	case SK_HWEV_SET_FLOWMODE:
-		Val8 = (SK_U8)Para.Para32[1];
-		if (pPrt->PFlowCtrlMode != Val8) {
-			/* Set New Flow Control mode */
-			pPrt->PFlowCtrlMode = Val8;
-
-			/* Restart Port */
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
-		}
-		break;
-
-	case SK_HWEV_SET_ROLE:
-		/* not possible for fiber */
-		if (!pAC->GIni.GICopperType) {
-			break;
-		}
-		Val8 = (SK_U8)Para.Para32[1];
-		if (pPrt->PMSMode != Val8) {
-			/* Set New Role (Master/Slave) mode */
-			pPrt->PMSMode = Val8;
-
-			/* Restart Port */
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
-		}
-		break;
-
-	case SK_HWEV_SET_SPEED:
-		if (pPrt->PhyType != SK_PHY_MARV_COPPER) {
-			break;
-		}
-		Val8 = (SK_U8)Para.Para32[1];
-		if (pPrt->PLinkSpeed != Val8) {
-			/* Set New Speed parameter */
-			pPrt->PLinkSpeed = Val8;
-
-			/* Restart Port */
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
-		}
-		break;
-
-#ifdef GENESIS
-	case SK_HWEV_HALFDUP_CHK:
-		if (pAC->GIni.GIGenesis) {
-			/*
-			 * half duplex hangup workaround.
-			 * See packet arbiter timeout interrupt for description
-			 */
-			pPrt->HalfDupTimerActive = SK_FALSE;
-			if (pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF ||
-				pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) {
-				/* Snap statistic counters */
-				(void)SkXmUpdateStats(pAC, IoC, Port);
-
-				(void)SkXmMacStatistic(pAC, IoC, Port, XM_TXO_OK_HI, &Val32);
-
-				Octets = (SK_U64)Val32 << 32;
-				
-				(void)SkXmMacStatistic(pAC, IoC, Port, XM_TXO_OK_LO, &Val32);
-
-				Octets += Val32;
-				
-				if (pPrt->LastOctets == Octets) {
-					/* Tx hanging, a FIFO flush restarts it */
-					SkMacFlushTxFifo(pAC, IoC, Port);
-				}
-			}
-		}
-		break;
-#endif /* GENESIS */
-	
-	default:
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_SIRQ_E001, SKERR_SIRQ_E001MSG);
-		break;
-	}
-
-	return(0);
-}	/* SkGeSirqEvent */
-
-
-#ifdef GENESIS
-/******************************************************************************
- *
- *	SkPhyIsrBcom() - PHY interrupt service routine
- *
- * Description: handles all interrupts from BCom PHY
- *
- * Returns: N/A
- */
-static void SkPhyIsrBcom(
-SK_AC		*pAC,		/* Adapter Context */
-SK_IOC		IoC,		/* Io Context */
-int			Port,		/* Port Num = PHY Num */
-SK_U16		IStatus)	/* Interrupt Status */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	SK_EVPARA	Para;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if ((IStatus & PHY_B_IS_PSE) != 0) {
-		/* Incorrectable pair swap error */
-		SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E022,
-			SKERR_SIRQ_E022MSG);
-	}
-	
-	if ((IStatus & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) != 0) {
-
-		SkHWLinkDown(pAC, IoC, Port);
-
-		Para.Para32[0] = (SK_U32)Port;
-		/* Signal to RLMT */
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-
-		/* Start workaround Errata #2 timer */
-		SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME,
-			SKGE_HWAC, SK_HWEV_WATIM, Para);
-	}
-
-}	/* SkPhyIsrBcom */
-#endif /* GENESIS */
-
-
-#ifdef YUKON
-/******************************************************************************
- *
- *	SkPhyIsrGmac() - PHY interrupt service routine
- *
- * Description: handles all interrupts from Marvell PHY
- *
- * Returns: N/A
- */
-static void SkPhyIsrGmac(
-SK_AC		*pAC,		/* Adapter Context */
-SK_IOC		IoC,		/* Io Context */
-int			Port,		/* Port Num = PHY Num */
-SK_U16		IStatus)	/* Interrupt Status */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	SK_EVPARA	Para;
-	SK_U16		Word;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if ((IStatus & (PHY_M_IS_AN_PR | PHY_M_IS_LST_CHANGE)) != 0) {
-
-		SkHWLinkDown(pAC, IoC, Port);
-
-		SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_ADV, &Word);
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("AutoNeg.Adv: 0x%04X\n", Word));
-		
-		/* Set Auto-negotiation advertisement */
-		if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM) {
-			/* restore Asymmetric Pause bit */
-			SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_AUNE_ADV,
-				(SK_U16)(Word | PHY_M_AN_ASP));
-		}
-		
-		Para.Para32[0] = (SK_U32)Port;
-		/* Signal to RLMT */
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-	
-	if ((IStatus & PHY_M_IS_AN_ERROR) != 0) {
-		/* Auto-Negotiation Error */
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E023, SKERR_SIRQ_E023MSG);
-	}
-	
-	if ((IStatus & PHY_M_IS_FIFO_ERROR) != 0) {
-		/* FIFO Overflow/Underrun Error */
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E024, SKERR_SIRQ_E024MSG);
-	}
-	
-}	/* SkPhyIsrGmac */
-#endif /* YUKON */
-
-
-#ifdef OTHER_PHY
-/******************************************************************************
- *
- *	SkPhyIsrLone() - PHY interrupt service routine
- *
- * Description: handles all interrupts from LONE PHY
- *
- * Returns: N/A
- */
-static void SkPhyIsrLone(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* Io Context */
-int		Port,		/* Port Num = PHY Num */
-SK_U16	IStatus)	/* Interrupt Status */
-{
-	SK_EVPARA	Para;
-
-	if (IStatus & (PHY_L_IS_DUP | PHY_L_IS_ISOL)) {
-		
-		SkHWLinkDown(pAC, IoC, Port);
-
-		Para.Para32[0] = (SK_U32)Port;
-		/* Signal to RLMT */
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-}	/* SkPhyIsrLone */
-#endif /* OTHER_PHY */
-
-/* End of File */