qlcnic: Qlogic ethernet driver for CNA devices

o 1G/10G Ethernet Driver for Qlgic QLE8240 and QLE8242 CNA devices.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 1106 insertions, 0 deletions

diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
new file mode 100644
index 000000000000..abec46846539
--- /dev/null
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -0,0 +1,1106 @@
+/*
+ * Copyright (C) 2009 - QLogic Corporation.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ * MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called "COPYING".
+ *
+ */
+
+#ifndef _QLCNIC_H_
+#define _QLCNIC_H_
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ip.h>
+#include <linux/in.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/firmware.h>
+
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/timer.h>
+
+#include <linux/vmalloc.h>
+
+#include <linux/io.h>
+#include <asm/byteorder.h>
+
+#include "qlcnic_hdr.h"
+
+#define _QLCNIC_LINUX_MAJOR 5
+#define _QLCNIC_LINUX_MINOR 0
+#define _QLCNIC_LINUX_SUBVERSION 0
+#define QLCNIC_LINUX_VERSIONID  "5.0.0"
+
+#define QLCNIC_VERSION_CODE(a, b, c)	(((a) << 24) + ((b) << 16) + (c))
+#define _major(v)	(((v) >> 24) & 0xff)
+#define _minor(v)	(((v) >> 16) & 0xff)
+#define _build(v)	((v) & 0xffff)
+
+/* version in image has weird encoding:
+ *  7:0  - major
+ * 15:8  - minor
+ * 31:16 - build (little endian)
+ */
+#define QLCNIC_DECODE_VERSION(v) \
+	QLCNIC_VERSION_CODE(((v) & 0xff), (((v) >> 8) & 0xff), ((v) >> 16))
+
+#define QLCNIC_NUM_FLASH_SECTORS (64)
+#define QLCNIC_FLASH_SECTOR_SIZE (64 * 1024)
+#define QLCNIC_FLASH_TOTAL_SIZE  (QLCNIC_NUM_FLASH_SECTORS \
+					* QLCNIC_FLASH_SECTOR_SIZE)
+
+#define RCV_DESC_RINGSIZE(rds_ring)	\
+	(sizeof(struct rcv_desc) * (rds_ring)->num_desc)
+#define RCV_BUFF_RINGSIZE(rds_ring)	\
+	(sizeof(struct qlcnic_rx_buffer) * rds_ring->num_desc)
+#define STATUS_DESC_RINGSIZE(sds_ring)	\
+	(sizeof(struct status_desc) * (sds_ring)->num_desc)
+#define TX_BUFF_RINGSIZE(tx_ring)	\
+	(sizeof(struct qlcnic_cmd_buffer) * tx_ring->num_desc)
+#define TX_DESC_RINGSIZE(tx_ring)	\
+	(sizeof(struct cmd_desc_type0) * tx_ring->num_desc)
+
+#define QLCNIC_P3P_A0		0x50
+
+#define QLCNIC_IS_REVISION_P3P(REVISION)     (REVISION >= QLCNIC_P3P_A0)
+
+#define FIRST_PAGE_GROUP_START	0
+#define FIRST_PAGE_GROUP_END	0x100000
+
+#define P3_MAX_MTU                     (9600)
+#define QLCNIC_MAX_ETHERHDR                32 /* This contains some padding */
+
+#define QLCNIC_P3_RX_BUF_MAX_LEN         (QLCNIC_MAX_ETHERHDR + ETH_DATA_LEN)
+#define QLCNIC_P3_RX_JUMBO_BUF_MAX_LEN   (QLCNIC_MAX_ETHERHDR + P3_MAX_MTU)
+#define QLCNIC_CT_DEFAULT_RX_BUF_LEN	2048
+#define QLCNIC_LRO_BUFFER_EXTRA		2048
+
+#define QLCNIC_RX_LRO_BUFFER_LENGTH		(8060)
+
+/* Opcodes to be used with the commands */
+#define TX_ETHER_PKT	0x01
+#define TX_TCP_PKT	0x02
+#define TX_UDP_PKT	0x03
+#define TX_IP_PKT	0x04
+#define TX_TCP_LSO	0x05
+#define TX_TCP_LSO6	0x06
+#define TX_IPSEC	0x07
+#define TX_IPSEC_CMD	0x0a
+#define TX_TCPV6_PKT	0x0b
+#define TX_UDPV6_PKT	0x0c
+
+/* Tx defines */
+#define MAX_BUFFERS_PER_CMD	32
+#define TX_STOP_THRESH		((MAX_SKB_FRAGS >> 2) + 4)
+#define QLCNIC_MAX_TX_TIMEOUTS	2
+
+/*
+ * Following are the states of the Phantom. Phantom will set them and
+ * Host will read to check if the fields are correct.
+ */
+#define PHAN_INITIALIZE_FAILED		0xffff
+#define PHAN_INITIALIZE_COMPLETE	0xff01
+
+/* Host writes the following to notify that it has done the init-handshake */
+#define PHAN_INITIALIZE_ACK		0xf00f
+#define PHAN_PEG_RCV_INITIALIZED	0xff01
+
+#define NUM_RCV_DESC_RINGS	3
+#define NUM_STS_DESC_RINGS	4
+
+#define RCV_RING_NORMAL 0
+#define RCV_RING_JUMBO	1
+#define RCV_RING_LRO	2
+
+#define MIN_CMD_DESCRIPTORS		64
+#define MIN_RCV_DESCRIPTORS		64
+#define MIN_JUMBO_DESCRIPTORS		32
+
+#define MAX_CMD_DESCRIPTORS		1024
+#define MAX_RCV_DESCRIPTORS_1G		4096
+#define MAX_RCV_DESCRIPTORS_10G 	8192
+#define MAX_JUMBO_RCV_DESCRIPTORS_1G	512
+#define MAX_JUMBO_RCV_DESCRIPTORS_10G	1024
+#define MAX_LRO_RCV_DESCRIPTORS		8
+
+#define DEFAULT_RCV_DESCRIPTORS_1G	2048
+#define DEFAULT_RCV_DESCRIPTORS_10G	4096
+
+#define get_next_index(index, length)	\
+	(((index) + 1) & ((length) - 1))
+
+#define MPORT_MULTI_FUNCTION_MODE 0x2222
+
+/*
+ * Following data structures describe the descriptors that will be used.
+ * Added fileds of tcpHdrSize and ipHdrSize, The driver needs to do it only when
+ * we are doing LSO (above the 1500 size packet) only.
+ */
+
+#define FLAGS_VLAN_TAGGED	0x10
+#define FLAGS_VLAN_OOB		0x40
+
+#define qlcnic_set_tx_vlan_tci(cmd_desc, v)	\
+	(cmd_desc)->vlan_TCI = cpu_to_le16(v);
+#define qlcnic_set_cmd_desc_port(cmd_desc, var)	\
+	((cmd_desc)->port_ctxid |= ((var) & 0x0F))
+#define qlcnic_set_cmd_desc_ctxid(cmd_desc, var)	\
+	((cmd_desc)->port_ctxid |= ((var) << 4 & 0xF0))
+
+#define qlcnic_set_tx_port(_desc, _port) \
+	((_desc)->port_ctxid = ((_port) & 0xf) | (((_port) << 4) & 0xf0))
+
+#define qlcnic_set_tx_flags_opcode(_desc, _flags, _opcode) \
+	((_desc)->flags_opcode = \
+	cpu_to_le16(((_flags) & 0x7f) | (((_opcode) & 0x3f) << 7)))
+
+#define qlcnic_set_tx_frags_len(_desc, _frags, _len) \
+	((_desc)->nfrags__length = \
+	cpu_to_le32(((_frags) & 0xff) | (((_len) & 0xffffff) << 8)))
+
+struct cmd_desc_type0 {
+	u8 tcp_hdr_offset;	/* For LSO only */
+	u8 ip_hdr_offset;	/* For LSO only */
+	__le16 flags_opcode;	/* 15:13 unused, 12:7 opcode, 6:0 flags */
+	__le32 nfrags__length;	/* 31:8 total len, 7:0 frag count */
+
+	__le64 addr_buffer2;
+
+	__le16 reference_handle;
+	__le16 mss;
+	u8 port_ctxid;		/* 7:4 ctxid 3:0 port */
+	u8 total_hdr_length;	/* LSO only : MAC+IP+TCP Hdr size */
+	__le16 conn_id;		/* IPSec offoad only */
+
+	__le64 addr_buffer3;
+	__le64 addr_buffer1;
+
+	__le16 buffer_length[4];
+
+	__le64 addr_buffer4;
+
+	__le32 reserved2;
+	__le16 reserved;
+	__le16 vlan_TCI;
+
+} __attribute__ ((aligned(64)));
+
+/* Note: sizeof(rcv_desc) should always be a mutliple of 2 */
+struct rcv_desc {
+	__le16 reference_handle;
+	__le16 reserved;
+	__le32 buffer_length;	/* allocated buffer length (usually 2K) */
+	__le64 addr_buffer;
+};
+
+/* opcode field in status_desc */
+#define QLCNIC_SYN_OFFLOAD	0x03
+#define QLCNIC_RXPKT_DESC  	0x04
+#define QLCNIC_OLD_RXPKT_DESC	0x3f
+#define QLCNIC_RESPONSE_DESC	0x05
+#define QLCNIC_LRO_DESC  	0x12
+
+/* for status field in status_desc */
+#define STATUS_CKSUM_OK		(2)
+
+/* owner bits of status_desc */
+#define STATUS_OWNER_HOST	(0x1ULL << 56)
+#define STATUS_OWNER_PHANTOM	(0x2ULL << 56)
+
+/* Status descriptor:
+   0-3 port, 4-7 status, 8-11 type, 12-27 total_length
+   28-43 reference_handle, 44-47 protocol, 48-52 pkt_offset
+   53-55 desc_cnt, 56-57 owner, 58-63 opcode
+ */
+#define qlcnic_get_sts_port(sts_data)	\
+	((sts_data) & 0x0F)
+#define qlcnic_get_sts_status(sts_data)	\
+	(((sts_data) >> 4) & 0x0F)
+#define qlcnic_get_sts_type(sts_data)	\
+	(((sts_data) >> 8) & 0x0F)
+#define qlcnic_get_sts_totallength(sts_data)	\
+	(((sts_data) >> 12) & 0xFFFF)
+#define qlcnic_get_sts_refhandle(sts_data)	\
+	(((sts_data) >> 28) & 0xFFFF)
+#define qlcnic_get_sts_prot(sts_data)	\
+	(((sts_data) >> 44) & 0x0F)
+#define qlcnic_get_sts_pkt_offset(sts_data)	\
+	(((sts_data) >> 48) & 0x1F)
+#define qlcnic_get_sts_desc_cnt(sts_data)	\
+	(((sts_data) >> 53) & 0x7)
+#define qlcnic_get_sts_opcode(sts_data)	\
+	(((sts_data) >> 58) & 0x03F)
+
+#define qlcnic_get_lro_sts_refhandle(sts_data) 	\
+	((sts_data) & 0x0FFFF)
+#define qlcnic_get_lro_sts_length(sts_data)	\
+	(((sts_data) >> 16) & 0x0FFFF)
+#define qlcnic_get_lro_sts_l2_hdr_offset(sts_data)	\
+	(((sts_data) >> 32) & 0x0FF)
+#define qlcnic_get_lro_sts_l4_hdr_offset(sts_data)	\
+	(((sts_data) >> 40) & 0x0FF)
+#define qlcnic_get_lro_sts_timestamp(sts_data)	\
+	(((sts_data) >> 48) & 0x1)
+#define qlcnic_get_lro_sts_type(sts_data)	\
+	(((sts_data) >> 49) & 0x7)
+#define qlcnic_get_lro_sts_push_flag(sts_data)		\
+	(((sts_data) >> 52) & 0x1)
+#define qlcnic_get_lro_sts_seq_number(sts_data)		\
+	((sts_data) & 0x0FFFFFFFF)
+
+
+struct status_desc {
+	__le64 status_desc_data[2];
+} __attribute__ ((aligned(16)));
+
+/* UNIFIED ROMIMAGE */
+#define QLCNIC_UNI_FW_MIN_SIZE		0xc8000
+#define QLCNIC_UNI_DIR_SECT_PRODUCT_TBL	0x0
+#define QLCNIC_UNI_DIR_SECT_BOOTLD	0x6
+#define QLCNIC_UNI_DIR_SECT_FW		0x7
+
+/*Offsets */
+#define QLCNIC_UNI_CHIP_REV_OFF		10
+#define QLCNIC_UNI_FLAGS_OFF		11
+#define QLCNIC_UNI_BIOS_VERSION_OFF 	12
+#define QLCNIC_UNI_BOOTLD_IDX_OFF	27
+#define QLCNIC_UNI_FIRMWARE_IDX_OFF 	29
+
+struct uni_table_desc{
+	u32	findex;
+	u32	num_entries;
+	u32	entry_size;
+	u32	reserved[5];
+};
+
+struct uni_data_desc{
+	u32	findex;
+	u32	size;
+	u32	reserved[5];
+};
+
+/* Magic number to let user know flash is programmed */
+#define	QLCNIC_BDINFO_MAGIC 0x12345678
+
+#define QLCNIC_BRDTYPE_P3_REF_QG	0x0021
+#define QLCNIC_BRDTYPE_P3_HMEZ		0x0022
+#define QLCNIC_BRDTYPE_P3_10G_CX4_LP	0x0023
+#define QLCNIC_BRDTYPE_P3_4_GB		0x0024
+#define QLCNIC_BRDTYPE_P3_IMEZ		0x0025
+#define QLCNIC_BRDTYPE_P3_10G_SFP_PLUS	0x0026
+#define QLCNIC_BRDTYPE_P3_10000_BASE_T	0x0027
+#define QLCNIC_BRDTYPE_P3_XG_LOM	0x0028
+#define QLCNIC_BRDTYPE_P3_4_GB_MM	0x0029
+#define QLCNIC_BRDTYPE_P3_10G_SFP_CT	0x002a
+#define QLCNIC_BRDTYPE_P3_10G_SFP_QT	0x002b
+#define QLCNIC_BRDTYPE_P3_10G_CX4	0x0031
+#define QLCNIC_BRDTYPE_P3_10G_XFP	0x0032
+#define QLCNIC_BRDTYPE_P3_10G_TP	0x0080
+
+/* Flash memory map */
+#define QLCNIC_BRDCFG_START	0x4000		/* board config */
+#define QLCNIC_BOOTLD_START	0x10000		/* bootld */
+#define QLCNIC_IMAGE_START	0x43000		/* compressed image */
+#define QLCNIC_USER_START	0x3E8000	/* Firmare info */
+
+#define QLCNIC_FW_VERSION_OFFSET	(QLCNIC_USER_START+0x408)
+#define QLCNIC_FW_SIZE_OFFSET		(QLCNIC_USER_START+0x40c)
+#define QLCNIC_FW_SERIAL_NUM_OFFSET	(QLCNIC_USER_START+0x81c)
+#define QLCNIC_BIOS_VERSION_OFFSET	(QLCNIC_USER_START+0x83c)
+
+#define QLCNIC_BRDTYPE_OFFSET		(QLCNIC_BRDCFG_START+0x8)
+#define QLCNIC_FW_MAGIC_OFFSET		(QLCNIC_BRDCFG_START+0x128)
+
+#define QLCNIC_FW_MIN_SIZE		(0x3fffff)
+#define QLCNIC_UNIFIED_ROMIMAGE  	0
+#define QLCNIC_FLASH_ROMIMAGE		1
+#define QLCNIC_UNKNOWN_ROMIMAGE		0xff
+
+#define QLCNIC_UNIFIED_ROMIMAGE_NAME	"phanfw.bin"
+#define QLCNIC_FLASH_ROMIMAGE_NAME	"flash"
+
+extern char qlcnic_driver_name[];
+
+/* Number of status descriptors to handle per interrupt */
+#define MAX_STATUS_HANDLE	(64)
+
+/*
+ * qlcnic_skb_frag{} is to contain mapping info for each SG list. This
+ * has to be freed when DMA is complete. This is part of qlcnic_tx_buffer{}.
+ */
+struct qlcnic_skb_frag {
+	u64 dma;
+	u64 length;
+};
+
+struct qlcnic_recv_crb {
+	u32 crb_rcv_producer[NUM_RCV_DESC_RINGS];
+	u32 crb_sts_consumer[NUM_STS_DESC_RINGS];
+	u32 sw_int_mask[NUM_STS_DESC_RINGS];
+};
+
+/*    Following defines are for the state of the buffers    */
+#define	QLCNIC_BUFFER_FREE	0
+#define	QLCNIC_BUFFER_BUSY	1
+
+/*
+ * There will be one qlcnic_buffer per skb packet.    These will be
+ * used to save the dma info for pci_unmap_page()
+ */
+struct qlcnic_cmd_buffer {
+	struct sk_buff *skb;
+	struct qlcnic_skb_frag frag_array[MAX_BUFFERS_PER_CMD + 1];
+	u32 frag_count;
+};
+
+/* In rx_buffer, we do not need multiple fragments as is a single buffer */
+struct qlcnic_rx_buffer {
+	struct list_head list;
+	struct sk_buff *skb;
+	u64 dma;
+	u16 ref_handle;
+	u16 state;
+};
+
+/* Board types */
+#define	QLCNIC_GBE	0x01
+#define	QLCNIC_XGBE	0x02
+
+/*
+ * One hardware_context{} per adapter
+ * contains interrupt info as well shared hardware info.
+ */
+struct qlcnic_hardware_context {
+	void __iomem *pci_base0;
+	void __iomem *ocm_win_crb;
+
+	unsigned long pci_len0;
+
+	u32 ocm_win;
+	u32 crb_win;
+
+	rwlock_t crb_lock;
+	struct mutex mem_lock;
+
+	u8 cut_through;
+	u8 revision_id;
+	u8 pci_func;
+	u8 linkup;
+	u16 port_type;
+	u16 board_type;
+};
+
+struct qlcnic_adapter_stats {
+	u64  xmitcalled;
+	u64  xmitfinished;
+	u64  rxdropped;
+	u64  txdropped;
+	u64  csummed;
+	u64  rx_pkts;
+	u64  lro_pkts;
+	u64  rxbytes;
+	u64  txbytes;
+};
+
+/*
+ * Rcv Descriptor Context. One such per Rcv Descriptor. There may
+ * be one Rcv Descriptor for normal packets, one for jumbo and may be others.
+ */
+struct qlcnic_host_rds_ring {
+	u32 producer;
+	u32 num_desc;
+	u32 dma_size;
+	u32 skb_size;
+	u32 flags;
+	void __iomem *crb_rcv_producer;
+	struct rcv_desc *desc_head;
+	struct qlcnic_rx_buffer *rx_buf_arr;
+	struct list_head free_list;
+	spinlock_t lock;
+	dma_addr_t phys_addr;
+};
+
+struct qlcnic_host_sds_ring {
+	u32 consumer;
+	u32 num_desc;
+	void __iomem *crb_sts_consumer;
+	void __iomem *crb_intr_mask;
+
+	struct status_desc *desc_head;
+	struct qlcnic_adapter *adapter;
+	struct napi_struct napi;
+	struct list_head free_list[NUM_RCV_DESC_RINGS];
+
+	int irq;
+
+	dma_addr_t phys_addr;
+	char name[IFNAMSIZ+4];
+};
+
+struct qlcnic_host_tx_ring {
+	u32 producer;
+	__le32 *hw_consumer;
+	u32 sw_consumer;
+	void __iomem *crb_cmd_producer;
+	u32 num_desc;
+
+	struct netdev_queue *txq;
+
+	struct qlcnic_cmd_buffer *cmd_buf_arr;
+	struct cmd_desc_type0 *desc_head;
+	dma_addr_t phys_addr;
+	dma_addr_t hw_cons_phys_addr;
+};
+
+/*
+ * Receive context. There is one such structure per instance of the
+ * receive processing. Any state information that is relevant to
+ * the receive, and is must be in this structure. The global data may be
+ * present elsewhere.
+ */
+struct qlcnic_recv_context {
+	u32 state;
+	u16 context_id;
+	u16 virt_port;
+
+	struct qlcnic_host_rds_ring *rds_rings;
+	struct qlcnic_host_sds_ring *sds_rings;
+};
+
+/* HW context creation */
+
+#define QLCNIC_OS_CRB_RETRY_COUNT	4000
+#define QLCNIC_CDRP_SIGNATURE_MAKE(pcifn, version) \
+	(((pcifn) & 0xff) | (((version) & 0xff) << 8) | (0xcafe << 16))
+
+#define QLCNIC_CDRP_CMD_BIT		0x80000000
+
+/*
+ * All responses must have the QLCNIC_CDRP_CMD_BIT cleared
+ * in the crb QLCNIC_CDRP_CRB_OFFSET.
+ */
+#define QLCNIC_CDRP_FORM_RSP(rsp)	(rsp)
+#define QLCNIC_CDRP_IS_RSP(rsp)	(((rsp) & QLCNIC_CDRP_CMD_BIT) == 0)
+
+#define QLCNIC_CDRP_RSP_OK		0x00000001
+#define QLCNIC_CDRP_RSP_FAIL		0x00000002
+#define QLCNIC_CDRP_RSP_TIMEOUT 	0x00000003
+
+/*
+ * All commands must have the QLCNIC_CDRP_CMD_BIT set in
+ * the crb QLCNIC_CDRP_CRB_OFFSET.
+ */
+#define QLCNIC_CDRP_FORM_CMD(cmd)	(QLCNIC_CDRP_CMD_BIT | (cmd))
+#define QLCNIC_CDRP_IS_CMD(cmd)	(((cmd) & QLCNIC_CDRP_CMD_BIT) != 0)
+
+#define QLCNIC_CDRP_CMD_SUBMIT_CAPABILITIES     0x00000001
+#define QLCNIC_CDRP_CMD_READ_MAX_RDS_PER_CTX    0x00000002
+#define QLCNIC_CDRP_CMD_READ_MAX_SDS_PER_CTX    0x00000003
+#define QLCNIC_CDRP_CMD_READ_MAX_RULES_PER_CTX  0x00000004
+#define QLCNIC_CDRP_CMD_READ_MAX_RX_CTX         0x00000005
+#define QLCNIC_CDRP_CMD_READ_MAX_TX_CTX         0x00000006
+#define QLCNIC_CDRP_CMD_CREATE_RX_CTX           0x00000007
+#define QLCNIC_CDRP_CMD_DESTROY_RX_CTX          0x00000008
+#define QLCNIC_CDRP_CMD_CREATE_TX_CTX           0x00000009
+#define QLCNIC_CDRP_CMD_DESTROY_TX_CTX          0x0000000a
+#define QLCNIC_CDRP_CMD_SETUP_STATISTICS        0x0000000e
+#define QLCNIC_CDRP_CMD_GET_STATISTICS          0x0000000f
+#define QLCNIC_CDRP_CMD_DELETE_STATISTICS       0x00000010
+#define QLCNIC_CDRP_CMD_SET_MTU                 0x00000012
+#define QLCNIC_CDRP_CMD_READ_PHY		0x00000013
+#define QLCNIC_CDRP_CMD_WRITE_PHY		0x00000014
+#define QLCNIC_CDRP_CMD_READ_HW_REG		0x00000015
+#define QLCNIC_CDRP_CMD_GET_FLOW_CTL		0x00000016
+#define QLCNIC_CDRP_CMD_SET_FLOW_CTL		0x00000017
+#define QLCNIC_CDRP_CMD_READ_MAX_MTU		0x00000018
+#define QLCNIC_CDRP_CMD_READ_MAX_LRO		0x00000019
+#define QLCNIC_CDRP_CMD_CONFIGURE_TOE		0x0000001a
+#define QLCNIC_CDRP_CMD_FUNC_ATTRIB		0x0000001b
+#define QLCNIC_CDRP_CMD_READ_PEXQ_PARAMETERS	0x0000001c
+#define QLCNIC_CDRP_CMD_GET_LIC_CAPABILITIES	0x0000001d
+#define QLCNIC_CDRP_CMD_READ_MAX_LRO_PER_BOARD	0x0000001e
+#define QLCNIC_CDRP_CMD_MAX			0x0000001f
+
+#define QLCNIC_RCODE_SUCCESS		0
+#define QLCNIC_RCODE_TIMEOUT		17
+#define QLCNIC_DESTROY_CTX_RESET	0
+
+/*
+ * Capabilities Announced
+ */
+#define QLCNIC_CAP0_LEGACY_CONTEXT	(1)
+#define QLCNIC_CAP0_LEGACY_MN		(1 << 2)
+#define QLCNIC_CAP0_LSO 		(1 << 6)
+#define QLCNIC_CAP0_JUMBO_CONTIGUOUS	(1 << 7)
+#define QLCNIC_CAP0_LRO_CONTIGUOUS	(1 << 8)
+
+/*
+ * Context state
+ */
+#define QLCNIC_HOST_CTX_STATE_ACTIVE	2
+
+/*
+ * Rx context
+ */
+
+struct qlcnic_hostrq_sds_ring {
+	__le64 host_phys_addr;	/* Ring base addr */
+	__le32 ring_size;		/* Ring entries */
+	__le16 msi_index;
+	__le16 rsvd;		/* Padding */
+};
+
+struct qlcnic_hostrq_rds_ring {
+	__le64 host_phys_addr;	/* Ring base addr */
+	__le64 buff_size;		/* Packet buffer size */
+	__le32 ring_size;		/* Ring entries */
+	__le32 ring_kind;		/* Class of ring */
+};
+
+struct qlcnic_hostrq_rx_ctx {
+	__le64 host_rsp_dma_addr;	/* Response dma'd here */
+	__le32 capabilities[4];	/* Flag bit vector */
+	__le32 host_int_crb_mode;	/* Interrupt crb usage */
+	__le32 host_rds_crb_mode;	/* RDS crb usage */
+	/* These ring offsets are relative to data[0] below */
+	__le32 rds_ring_offset;	/* Offset to RDS config */
+	__le32 sds_ring_offset;	/* Offset to SDS config */
+	__le16 num_rds_rings;	/* Count of RDS rings */
+	__le16 num_sds_rings;	/* Count of SDS rings */
+	__le16 rsvd1;		/* Padding */
+	__le16 rsvd2;		/* Padding */
+	u8  reserved[128]; 	/* reserve space for future expansion*/
+	/* MUST BE 64-bit aligned.
+	   The following is packed:
+	   - N hostrq_rds_rings
+	   - N hostrq_sds_rings */
+	char data[0];
+};
+
+struct qlcnic_cardrsp_rds_ring{
+	__le32 host_producer_crb;	/* Crb to use */
+	__le32 rsvd1;		/* Padding */
+};
+
+struct qlcnic_cardrsp_sds_ring {
+	__le32 host_consumer_crb;	/* Crb to use */
+	__le32 interrupt_crb;	/* Crb to use */
+};
+
+struct qlcnic_cardrsp_rx_ctx {
+	/* These ring offsets are relative to data[0] below */
+	__le32 rds_ring_offset;	/* Offset to RDS config */
+	__le32 sds_ring_offset;	/* Offset to SDS config */
+	__le32 host_ctx_state;	/* Starting State */
+	__le32 num_fn_per_port;	/* How many PCI fn share the port */
+	__le16 num_rds_rings;	/* Count of RDS rings */
+	__le16 num_sds_rings;	/* Count of SDS rings */
+	__le16 context_id;		/* Handle for context */
+	u8  phys_port;		/* Physical id of port */
+	u8  virt_port;		/* Virtual/Logical id of port */
+	u8  reserved[128];	/* save space for future expansion */
+	/*  MUST BE 64-bit aligned.
+	   The following is packed:
+	   - N cardrsp_rds_rings
+	   - N cardrs_sds_rings */
+	char data[0];
+};
+
+#define SIZEOF_HOSTRQ_RX(HOSTRQ_RX, rds_rings, sds_rings)	\
+	(sizeof(HOSTRQ_RX) + 					\
+	(rds_rings)*(sizeof(struct qlcnic_hostrq_rds_ring)) +		\
+	(sds_rings)*(sizeof(struct qlcnic_hostrq_sds_ring)))
+
+#define SIZEOF_CARDRSP_RX(CARDRSP_RX, rds_rings, sds_rings) 	\
+	(sizeof(CARDRSP_RX) + 					\
+	(rds_rings)*(sizeof(struct qlcnic_cardrsp_rds_ring)) + 		\
+	(sds_rings)*(sizeof(struct qlcnic_cardrsp_sds_ring)))
+
+/*
+ * Tx context
+ */
+
+struct qlcnic_hostrq_cds_ring {
+	__le64 host_phys_addr;	/* Ring base addr */
+	__le32 ring_size;		/* Ring entries */
+	__le32 rsvd;		/* Padding */
+};
+
+struct qlcnic_hostrq_tx_ctx {
+	__le64 host_rsp_dma_addr;	/* Response dma'd here */
+	__le64 cmd_cons_dma_addr;	/*  */
+	__le64 dummy_dma_addr;	/*  */
+	__le32 capabilities[4];	/* Flag bit vector */
+	__le32 host_int_crb_mode;	/* Interrupt crb usage */
+	__le32 rsvd1;		/* Padding */
+	__le16 rsvd2;		/* Padding */
+	__le16 interrupt_ctl;
+	__le16 msi_index;
+	__le16 rsvd3;		/* Padding */
+	struct qlcnic_hostrq_cds_ring cds_ring;	/* Desc of cds ring */
+	u8  reserved[128];	/* future expansion */
+};
+
+struct qlcnic_cardrsp_cds_ring {
+	__le32 host_producer_crb;	/* Crb to use */
+	__le32 interrupt_crb;	/* Crb to use */
+};
+
+struct qlcnic_cardrsp_tx_ctx {
+	__le32 host_ctx_state;	/* Starting state */
+	__le16 context_id;		/* Handle for context */
+	u8  phys_port;		/* Physical id of port */
+	u8  virt_port;		/* Virtual/Logical id of port */
+	struct qlcnic_cardrsp_cds_ring cds_ring;	/* Card cds settings */
+	u8  reserved[128];	/* future expansion */
+};
+
+#define SIZEOF_HOSTRQ_TX(HOSTRQ_TX)	(sizeof(HOSTRQ_TX))
+#define SIZEOF_CARDRSP_TX(CARDRSP_TX)	(sizeof(CARDRSP_TX))
+
+/* CRB */
+
+#define QLCNIC_HOST_RDS_CRB_MODE_UNIQUE	0
+#define QLCNIC_HOST_RDS_CRB_MODE_SHARED	1
+#define QLCNIC_HOST_RDS_CRB_MODE_CUSTOM	2
+#define QLCNIC_HOST_RDS_CRB_MODE_MAX	3
+
+#define QLCNIC_HOST_INT_CRB_MODE_UNIQUE	0
+#define QLCNIC_HOST_INT_CRB_MODE_SHARED	1
+#define QLCNIC_HOST_INT_CRB_MODE_NORX	2
+#define QLCNIC_HOST_INT_CRB_MODE_NOTX	3
+#define QLCNIC_HOST_INT_CRB_MODE_NORXTX	4
+
+
+/* MAC */
+
+#define MC_COUNT_P3	38
+
+#define QLCNIC_MAC_NOOP	0
+#define QLCNIC_MAC_ADD	1
+#define QLCNIC_MAC_DEL	2
+
+struct qlcnic_mac_list_s {
+	struct list_head list;
+	uint8_t mac_addr[ETH_ALEN+2];
+};
+
+/*
+ * Interrupt coalescing defaults. The defaults are for 1500 MTU. It is
+ * adjusted based on configured MTU.
+ */
+#define QLCNIC_DEFAULT_INTR_COALESCE_RX_TIME_US	3
+#define QLCNIC_DEFAULT_INTR_COALESCE_RX_PACKETS	256
+#define QLCNIC_DEFAULT_INTR_COALESCE_TX_PACKETS	64
+#define QLCNIC_DEFAULT_INTR_COALESCE_TX_TIME_US	4
+
+#define QLCNIC_INTR_DEFAULT			0x04
+
+union qlcnic_nic_intr_coalesce_data {
+	struct {
+		u16	rx_packets;
+		u16	rx_time_us;
+		u16	tx_packets;
+		u16	tx_time_us;
+	} data;
+	u64		word;
+};
+
+struct qlcnic_nic_intr_coalesce {
+	u16		stats_time_us;
+	u16		rate_sample_time;
+	u16		flags;
+	u16		rsvd_1;
+	u32		low_threshold;
+	u32		high_threshold;
+	union qlcnic_nic_intr_coalesce_data	normal;
+	union qlcnic_nic_intr_coalesce_data	low;
+	union qlcnic_nic_intr_coalesce_data	high;
+	union qlcnic_nic_intr_coalesce_data	irq;
+};
+
+#define QLCNIC_HOST_REQUEST	0x13
+#define QLCNIC_REQUEST		0x14
+
+#define QLCNIC_MAC_EVENT	0x1
+
+#define QLCNIC_IP_UP		2
+#define QLCNIC_IP_DOWN		3
+
+/*
+ * Driver --> Firmware
+ */
+#define QLCNIC_H2C_OPCODE_START 			0
+#define QLCNIC_H2C_OPCODE_CONFIG_RSS			1
+#define QLCNIC_H2C_OPCODE_CONFIG_RSS_TBL		2
+#define QLCNIC_H2C_OPCODE_CONFIG_INTR_COALESCE		3
+#define QLCNIC_H2C_OPCODE_CONFIG_LED			4
+#define QLCNIC_H2C_OPCODE_CONFIG_PROMISCUOUS		5
+#define QLCNIC_H2C_OPCODE_CONFIG_L2_MAC 		6
+#define QLCNIC_H2C_OPCODE_LRO_REQUEST			7
+#define QLCNIC_H2C_OPCODE_GET_SNMP_STATS		8
+#define QLCNIC_H2C_OPCODE_PROXY_START_REQUEST		9
+#define QLCNIC_H2C_OPCODE_PROXY_STOP_REQUEST		10
+#define QLCNIC_H2C_OPCODE_PROXY_SET_MTU 		11
+#define QLCNIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE	12
+#define QLCNIC_H2C_OPCODE_GET_FINGER_PRINT_REQUEST	13
+#define QLCNIC_H2C_OPCODE_INSTALL_LICENSE_REQUEST	14
+#define QLCNIC_H2C_OPCODE_GET_LICENSE_CAPABILITY_REQUEST	15
+#define QLCNIC_H2C_OPCODE_GET_NET_STATS 		16
+#define QLCNIC_H2C_OPCODE_PROXY_UPDATE_P2V		17
+#define QLCNIC_H2C_OPCODE_CONFIG_IPADDR 		18
+#define QLCNIC_H2C_OPCODE_CONFIG_LOOPBACK		19
+#define QLCNIC_H2C_OPCODE_PROXY_STOP_DONE		20
+#define QLCNIC_H2C_OPCODE_GET_LINKEVENT 		21
+#define QLCNIC_C2C_OPCODE				22
+#define QLCNIC_H2C_OPCODE_CONFIG_BRIDGING		23
+#define QLCNIC_H2C_OPCODE_CONFIG_HW_LRO 		24
+#define QLCNIC_H2C_OPCODE_LAST				25
+/*
+ * Firmware --> Driver
+ */
+
+#define QLCNIC_C2H_OPCODE_START 			128
+#define QLCNIC_C2H_OPCODE_CONFIG_RSS_RESPONSE		129
+#define QLCNIC_C2H_OPCODE_CONFIG_RSS_TBL_RESPONSE	130
+#define QLCNIC_C2H_OPCODE_CONFIG_MAC_RESPONSE		131
+#define QLCNIC_C2H_OPCODE_CONFIG_PROMISCUOUS_RESPONSE	132
+#define QLCNIC_C2H_OPCODE_CONFIG_L2_MAC_RESPONSE	133
+#define QLCNIC_C2H_OPCODE_LRO_DELETE_RESPONSE		134
+#define QLCNIC_C2H_OPCODE_LRO_ADD_FAILURE_RESPONSE	135
+#define QLCNIC_C2H_OPCODE_GET_SNMP_STATS		136
+#define QLCNIC_C2H_OPCODE_GET_FINGER_PRINT_REPLY	137
+#define QLCNIC_C2H_OPCODE_INSTALL_LICENSE_REPLY 	138
+#define QLCNIC_C2H_OPCODE_GET_LICENSE_CAPABILITIES_REPLY 139
+#define QLCNIC_C2H_OPCODE_GET_NET_STATS_RESPONSE	140
+#define QLCNIC_C2H_OPCODE_GET_LINKEVENT_RESPONSE	141
+#define QLCNIC_C2H_OPCODE_LAST				142
+
+#define VPORT_MISS_MODE_DROP		0 /* drop all unmatched */
+#define VPORT_MISS_MODE_ACCEPT_ALL	1 /* accept all packets */
+#define VPORT_MISS_MODE_ACCEPT_MULTI	2 /* accept unmatched multicast */
+
+#define QLCNIC_LRO_REQUEST_CLEANUP	4
+
+/* Capabilites received */
+#define QLCNIC_FW_CAPABILITY_BDG		(1 << 8)
+#define QLCNIC_FW_CAPABILITY_FVLANTX		(1 << 9)
+#define QLCNIC_FW_CAPABILITY_HW_LRO		(1 << 10)
+
+/* module types */
+#define LINKEVENT_MODULE_NOT_PRESENT			1
+#define LINKEVENT_MODULE_OPTICAL_UNKNOWN		2
+#define LINKEVENT_MODULE_OPTICAL_SRLR			3
+#define LINKEVENT_MODULE_OPTICAL_LRM			4
+#define LINKEVENT_MODULE_OPTICAL_SFP_1G 		5
+#define LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE	6
+#define LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN	7
+#define LINKEVENT_MODULE_TWINAX 			8
+
+#define LINKSPEED_10GBPS	10000
+#define LINKSPEED_1GBPS 	1000
+#define LINKSPEED_100MBPS	100
+#define LINKSPEED_10MBPS	10
+
+#define LINKSPEED_ENCODED_10MBPS	0
+#define LINKSPEED_ENCODED_100MBPS	1
+#define LINKSPEED_ENCODED_1GBPS 	2
+
+#define LINKEVENT_AUTONEG_DISABLED	0
+#define LINKEVENT_AUTONEG_ENABLED	1
+
+#define LINKEVENT_HALF_DUPLEX		0
+#define LINKEVENT_FULL_DUPLEX		1
+
+#define LINKEVENT_LINKSPEED_MBPS	0
+#define LINKEVENT_LINKSPEED_ENCODED	1
+
+#define AUTO_FW_RESET_ENABLED	0x01
+/* firmware response header:
+ *	63:58 - message type
+ *	57:56 - owner
+ *	55:53 - desc count
+ *	52:48 - reserved
+ *	47:40 - completion id
+ *	39:32 - opcode
+ *	31:16 - error code
+ *	15:00 - reserved
+ */
+#define qlcnic_get_nic_msg_opcode(msg_hdr)	\
+	((msg_hdr >> 32) & 0xFF)
+
+struct qlcnic_fw_msg {
+	union {
+		struct {
+			u64 hdr;
+			u64 body[7];
+		};
+		u64 words[8];
+	};
+};
+
+struct qlcnic_nic_req {
+	__le64 qhdr;
+	__le64 req_hdr;
+	__le64 words[6];
+};
+
+struct qlcnic_mac_req {
+	u8 op;
+	u8 tag;
+	u8 mac_addr[6];
+};
+
+#define QLCNIC_MSI_ENABLED		0x02
+#define QLCNIC_MSIX_ENABLED		0x04
+#define QLCNIC_LRO_ENABLED		0x08
+#define QLCNIC_BRIDGE_ENABLED       	0X10
+#define QLCNIC_DIAG_ENABLED		0x20
+#define QLCNIC_IS_MSI_FAMILY(adapter) \
+	((adapter)->flags & (QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED))
+
+#define MSIX_ENTRIES_PER_ADAPTER	NUM_STS_DESC_RINGS
+#define QLCNIC_MSIX_TBL_SPACE		8192
+#define QLCNIC_PCI_REG_MSIX_TBL 	0x44
+
+#define QLCNIC_NETDEV_WEIGHT	128
+#define QLCNIC_ADAPTER_UP_MAGIC 777
+
+#define __QLCNIC_FW_ATTACHED		0
+#define __QLCNIC_DEV_UP 		1
+#define __QLCNIC_RESETTING		2
+#define __QLCNIC_START_FW 		4
+
+struct qlcnic_adapter {
+	struct qlcnic_hardware_context ahw;
+
+	struct net_device *netdev;
+	struct pci_dev *pdev;
+	struct list_head mac_list;
+
+	spinlock_t tx_clean_lock;
+
+	u16 num_txd;
+	u16 num_rxd;
+	u16 num_jumbo_rxd;
+	u16 num_lro_rxd;
+
+	u8 max_rds_rings;
+	u8 max_sds_rings;
+	u8 driver_mismatch;
+	u8 msix_supported;
+	u8 rx_csum;
+	u8 pci_using_dac;
+	u8 portnum;
+	u8 physical_port;
+
+	u8 mc_enabled;
+	u8 max_mc_count;
+	u8 rss_supported;
+	u8 rsrvd1;
+	u8 fw_wait_cnt;
+	u8 fw_fail_cnt;
+	u8 tx_timeo_cnt;
+	u8 need_fw_reset;
+
+	u8 has_link_events;
+	u8 fw_type;
+	u16 tx_context_id;
+	u16 mtu;
+	u16 is_up;
+
+	u16 link_speed;
+	u16 link_duplex;
+	u16 link_autoneg;
+	u16 module_type;
+
+	u32 capabilities;
+	u32 flags;
+	u32 irq;
+	u32 temp;
+
+	u32 int_vec_bit;
+	u32 heartbit;
+
+	u8 dev_state;
+	u8 rsrd1;
+	u32 rsrd2;
+
+
+	u8 mac_addr[ETH_ALEN];
+
+	struct qlcnic_adapter_stats stats;
+
+	struct qlcnic_recv_context recv_ctx;
+	struct qlcnic_host_tx_ring *tx_ring;
+
+	void __iomem	*tgt_mask_reg;
+	void __iomem	*tgt_status_reg;
+	void __iomem	*crb_int_state_reg;
+	void __iomem	*isr_int_vec;
+
+	struct msix_entry msix_entries[MSIX_ENTRIES_PER_ADAPTER];
+
+	struct delayed_work fw_work;
+
+	struct work_struct  tx_timeout_task;
+
+	struct qlcnic_nic_intr_coalesce coal;
+
+	unsigned long state;
+	__le32 file_prd_off;	/*File fw product offset*/
+	u32 fw_version;
+	const struct firmware *fw;
+};
+
+int qlcnic_fw_cmd_query_phy(struct qlcnic_adapter *adapter, u32 reg, u32 *val);
+int qlcnic_fw_cmd_set_phy(struct qlcnic_adapter *adapter, u32 reg, u32 val);
+
+u32 qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off);
+int qlcnic_hw_write_wx_2M(struct qlcnic_adapter *, ulong off, u32 data);
+int qlcnic_pci_mem_write_2M(struct qlcnic_adapter *, u64 off, u64 data);
+int qlcnic_pci_mem_read_2M(struct qlcnic_adapter *, u64 off, u64 *data);
+
+#define QLCRD32(adapter, off) \
+	(qlcnic_hw_read_wx_2M(adapter, off))
+#define QLCWR32(adapter, off, val) \
+	(qlcnic_hw_write_wx_2M(adapter, off, val))
+
+int qlcnic_pcie_sem_lock(struct qlcnic_adapter *, int, u32);
+void qlcnic_pcie_sem_unlock(struct qlcnic_adapter *, int);
+
+#define qlcnic_rom_lock(a)	\
+	qlcnic_pcie_sem_lock((a), 2, QLCNIC_ROM_LOCK_ID)
+#define qlcnic_rom_unlock(a)	\
+	qlcnic_pcie_sem_unlock((a), 2)
+#define qlcnic_phy_lock(a)	\
+	qlcnic_pcie_sem_lock((a), 3, QLCNIC_PHY_LOCK_ID)
+#define qlcnic_phy_unlock(a)	\
+	qlcnic_pcie_sem_unlock((a), 3)
+#define qlcnic_api_lock(a)	\
+	qlcnic_pcie_sem_lock((a), 5, 0)
+#define qlcnic_api_unlock(a)	\
+	qlcnic_pcie_sem_unlock((a), 5)
+#define qlcnic_sw_lock(a)	\
+	qlcnic_pcie_sem_lock((a), 6, 0)
+#define qlcnic_sw_unlock(a)	\
+	qlcnic_pcie_sem_unlock((a), 6)
+#define crb_win_lock(a)	\
+	qlcnic_pcie_sem_lock((a), 7, QLCNIC_CRB_WIN_LOCK_ID)
+#define crb_win_unlock(a)	\
+	qlcnic_pcie_sem_unlock((a), 7)
+
+int qlcnic_get_board_info(struct qlcnic_adapter *adapter);
+int qlcnic_wol_supported(struct qlcnic_adapter *adapter);
+
+/* Functions from qlcnic_init.c */
+int qlcnic_phantom_init(struct qlcnic_adapter *adapter);
+int qlcnic_load_firmware(struct qlcnic_adapter *adapter);
+int qlcnic_need_fw_reset(struct qlcnic_adapter *adapter);
+void qlcnic_request_firmware(struct qlcnic_adapter *adapter);
+void qlcnic_release_firmware(struct qlcnic_adapter *adapter);
+int qlcnic_pinit_from_rom(struct qlcnic_adapter *adapter);
+
+int qlcnic_rom_fast_read(struct qlcnic_adapter *adapter, int addr, int *valp);
+int qlcnic_rom_fast_read_words(struct qlcnic_adapter *adapter, int addr,
+				u8 *bytes, size_t size);
+int qlcnic_alloc_sw_resources(struct qlcnic_adapter *adapter);
+void qlcnic_free_sw_resources(struct qlcnic_adapter *adapter);
+
+void __iomem *qlcnic_get_ioaddr(struct qlcnic_adapter *, u32);
+
+int qlcnic_alloc_hw_resources(struct qlcnic_adapter *adapter);
+void qlcnic_free_hw_resources(struct qlcnic_adapter *adapter);
+
+void qlcnic_release_rx_buffers(struct qlcnic_adapter *adapter);
+void qlcnic_release_tx_buffers(struct qlcnic_adapter *adapter);
+
+int qlcnic_init_firmware(struct qlcnic_adapter *adapter);
+void qlcnic_watchdog_task(struct work_struct *work);
+void qlcnic_post_rx_buffers(struct qlcnic_adapter *adapter, u32 ringid,
+		struct qlcnic_host_rds_ring *rds_ring);
+int qlcnic_process_rcv_ring(struct qlcnic_host_sds_ring *sds_ring, int max);
+void qlcnic_set_multi(struct net_device *netdev);
+void qlcnic_free_mac_list(struct qlcnic_adapter *adapter);
+int qlcnic_nic_set_promisc(struct qlcnic_adapter *adapter, u32);
+int qlcnic_config_intr_coalesce(struct qlcnic_adapter *adapter);
+int qlcnic_config_rss(struct qlcnic_adapter *adapter, int enable);
+int qlcnic_config_ipaddr(struct qlcnic_adapter *adapter, u32 ip, int cmd);
+int qlcnic_linkevent_request(struct qlcnic_adapter *adapter, int enable);
+void qlcnic_advert_link_change(struct qlcnic_adapter *adapter, int linkup);
+
+int qlcnic_fw_cmd_set_mtu(struct qlcnic_adapter *adapter, int mtu);
+int qlcnic_change_mtu(struct net_device *netdev, int new_mtu);
+int qlcnic_config_hw_lro(struct qlcnic_adapter *adapter, int enable);
+int qlcnic_config_bridged_mode(struct qlcnic_adapter *adapter, int enable);
+int qlcnic_send_lro_cleanup(struct qlcnic_adapter *adapter);
+void qlcnic_update_cmd_producer(struct qlcnic_adapter *adapter,
+		struct qlcnic_host_tx_ring *tx_ring);
+int qlcnic_get_mac_addr(struct qlcnic_adapter *adapter, u64 *mac);
+
+/* Functions from qlcnic_main.c */
+int qlcnic_reset_context(struct qlcnic_adapter *);
+
+/*
+ * QLOGIC Board information
+ */
+
+#define QLCNIC_MAX_BOARD_NAME_LEN 64
+struct qlcnic_brdinfo {
+	unsigned short  vendor;
+	unsigned short  device;
+	unsigned short  sub_vendor;
+	unsigned short  sub_device;
+	char short_name[QLCNIC_MAX_BOARD_NAME_LEN];
+};
+
+static const struct qlcnic_brdinfo qlcnic_boards[] = {
+	{0x1077, 0x8020, 0x1077, 0x203, "8200 Series Single Port 10GbE CNA"},
+	{0x1077, 0x8020, 0x1077, 0x207, "8200 Series Dual Port 10GbE CNA"},
+	{0x1077, 0x8020, 0x1077, 0x20b,
+		"3200 Series Dual Port 10Gb Intelligent Ethernet Adapter"},
+	{0x1077, 0x8020, 0x1077, 0x20c,
+		"3200 Series Quad Port 1Gb Intelligent Ethernet Adapter"},
+	{0x1077, 0x8020, 0x1077, 0x20f,
+		"3200 Series Single Port 10Gb Intelligent Ethernet Adapter"},
+	{0x1077, 0x8020, 0x0, 0x0, "cLOM8214 1/10GbE Controller"},
+};
+
+#define NUM_SUPPORTED_BOARDS ARRAY_SIZE(qlcnic_boards)
+
+static inline u32 qlcnic_tx_avail(struct qlcnic_host_tx_ring *tx_ring)
+{
+	smp_mb();
+	if (tx_ring->producer < tx_ring->sw_consumer)
+		return tx_ring->sw_consumer - tx_ring->producer;
+	else
+		return tx_ring->sw_consumer + tx_ring->num_desc -
+				tx_ring->producer;
+}
+
+extern const struct ethtool_ops qlcnic_ethtool_ops;
+
+#endif				/* __QLCNIC_H_ */