summaryrefslogtreecommitdiffstats
path: root/drivers/net/qla3xxx.h
diff options
context:
space:
mode:
authorRon Mercer <ron.mercer@qlogic.com>2007-03-26 12:43:52 -0700
committerJeff Garzik <jeff@garzik.org>2007-04-28 11:01:02 -0400
commit3efedf2e5b814f3edd99e4f4ca47a604871ebe0e (patch)
tree2cc59d55ca90b1ca4bcff89e227529584a6b35fd /drivers/net/qla3xxx.h
parentec8263839aa8bc6eeee608a045e8f51738d7e436 (diff)
downloadblackbird-op-linux-3efedf2e5b814f3edd99e4f4ca47a604871ebe0e.tar.gz
blackbird-op-linux-3efedf2e5b814f3edd99e4f4ca47a604871ebe0e.zip
qla3xxx: Adding support for the Agere PHY (ET1011C)
This PHY support patch was written by Benjamin Li. Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/qla3xxx.h')
-rwxr-xr-xdrivers/net/qla3xxx.h33
1 files changed, 31 insertions, 2 deletions
diff --git a/drivers/net/qla3xxx.h b/drivers/net/qla3xxx.h
index 0203f88f0544..4a832c46c274 100755
--- a/drivers/net/qla3xxx.h
+++ b/drivers/net/qla3xxx.h
@@ -293,6 +293,16 @@ struct net_rsp_iocb {
#define MII_SCAN_REGISTER 0x00000001
+#define PHY_ID_0_REG 2
+#define PHY_ID_1_REG 3
+
+#define PHY_OUI_1_MASK 0xfc00
+#define PHY_MODEL_MASK 0x03f0
+
+/* Address for the Agere Phy */
+#define MII_AGERE_ADDR_1 0x00001000
+#define MII_AGERE_ADDR_2 0x00001100
+
/* 32-bit ispControlStatus */
enum {
ISP_CONTROL_NP_MASK = 0x0003,
@@ -789,6 +799,7 @@ enum {
PHY_CTRL_LOOPBACK = 0x4000,
PETBI_CONTROL_REG = 0x00,
+ PETBI_CTRL_ALL_PARAMS = 0x7140,
PETBI_CTRL_SOFT_RESET = 0x8000,
PETBI_CTRL_AUTO_NEG = 0x1000,
PETBI_CTRL_RESTART_NEG = 0x0200,
@@ -811,6 +822,23 @@ enum {
PETBI_EXPANSION_REG = 0x06,
PETBI_EXP_PAGE_RX = 0x0002,
+ PHY_GIG_CONTROL = 9,
+ PHY_GIG_ENABLE_MAN = 0x1000, /* Enable Master/Slave Manual Config*/
+ PHY_GIG_SET_MASTER = 0x0800, /* Set Master (slave if clear)*/
+ PHY_GIG_ALL_PARAMS = 0x0300,
+ PHY_GIG_ADV_1000F = 0x0200,
+ PHY_GIG_ADV_1000H = 0x0100,
+
+ PHY_NEG_ADVER = 4,
+ PHY_NEG_ALL_PARAMS = 0x0fe0,
+ PHY_NEG_ASY_PAUSE = 0x0800,
+ PHY_NEG_SYM_PAUSE = 0x0400,
+ PHY_NEG_ADV_SPEED = 0x01e0,
+ PHY_NEG_ADV_100F = 0x0100,
+ PHY_NEG_ADV_100H = 0x0080,
+ PHY_NEG_ADV_10F = 0x0040,
+ PHY_NEG_ADV_10H = 0x0020,
+
PETBI_TBI_CTRL = 0x11,
PETBI_TBI_RESET = 0x8000,
PETBI_TBI_AUTO_SENSE = 0x0100,
@@ -826,8 +854,7 @@ enum {
PHY_AUX_RESET_STICK = 0x0002,
PHY_NEG_PAUSE = 0x0400,
PHY_CTRL_SOFT_RESET = 0x8000,
- PHY_NEG_ADVER = 4,
- PHY_NEG_ADV_SPEED = 0x01e0,
+ PHY_CTRL_AUTO_NEG = 0x1000,
PHY_CTRL_RESTART_NEG = 0x0200,
};
enum {
@@ -892,6 +919,7 @@ enum {EEPROM_SIZE = FM93C86A_SIZE_16,
u16 pauseThreshold_mac;
u16 resumeThreshold_mac;
u16 portConfiguration;
+#define PORT_CONFIG_DEFAULT 0xf700
#define PORT_CONFIG_AUTO_NEG_ENABLED 0x8000
#define PORT_CONFIG_SYM_PAUSE_ENABLED 0x4000
#define PORT_CONFIG_FULL_DUPLEX_ENABLED 0x2000
@@ -1259,6 +1287,7 @@ struct ql3_adapter {
struct delayed_work tx_timeout_work;
u32 max_frame_size;
u32 device_id;
+ u16 phyType;
};
#endif /* _QLA3XXX_H_ */
OpenPOWER on IntegriCloud