summaryrefslogtreecommitdiffstats
path: root/drivers/net/pcmcia
diff options
context:
space:
mode:
authorDominik Brodowski <linux@dominikbrodowski.net>2010-09-13 20:23:12 +0200
committerDominik Brodowski <linux@dominikbrodowski.net>2010-09-15 17:57:22 +0200
commitb76dc0546709aef18f123847680108c2fd33f203 (patch)
tree2d84710244028ee5e7e06e280f056181fd909a92 /drivers/net/pcmcia
parenteb838fe109b8f51ba590802761753a2631c3f7f0 (diff)
downloadblackbird-op-linux-b76dc0546709aef18f123847680108c2fd33f203.tar.gz
blackbird-op-linux-b76dc0546709aef18f123847680108c2fd33f203.zip
pcmcia pcnet_cs: try setting io_lines to 16 if card setup fails
Some pcnet_cs compatible cards require an exact 16-lines match of the ioport areas specified in CIS, but set the "iolines" value in the CIS incorrectly. We can easily work around this issue -- same as we do in serial_cs -- by first trying setting iolines to the CIS-specified value, and then trying a 16-line match. Reported-and-tested-by: Wolfram Sang <w.sang@pengutronix.de> Hardware-supplied-by: Jochen Frieling <j.frieling@pengutronix.de> CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Diffstat (limited to 'drivers/net/pcmcia')
-rw-r--r--drivers/net/pcmcia/pcnet_cs.c139
1 files changed, 83 insertions, 56 deletions
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 49279b0ee526..f9b509a6b09a 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -508,7 +508,8 @@ static int pcnet_confcheck(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- int *has_shmem = priv_data;
+ int *priv = priv_data;
+ int try = (*priv & 0x1);
int i;
cistpl_io_t *io = &cfg->io;
@@ -525,77 +526,103 @@ static int pcnet_confcheck(struct pcmcia_device *p_dev,
i = p_dev->resource[1]->end = 0;
}
- *has_shmem = ((cfg->mem.nwin == 1) &&
- (cfg->mem.win[0].len >= 0x4000));
+ *priv &= ((cfg->mem.nwin == 1) &&
+ (cfg->mem.win[0].len >= 0x4000)) ? 0x10 : ~0x10;
+
p_dev->resource[0]->start = io->win[i].base;
p_dev->resource[0]->end = io->win[i].len;
- p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ if (!try)
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ else
+ p_dev->io_lines = 16;
if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32)
return try_io_port(p_dev);
- return 0;
+ return -EINVAL;
+}
+
+static hw_info_t *pcnet_try_config(struct pcmcia_device *link,
+ int *has_shmem, int try)
+{
+ struct net_device *dev = link->priv;
+ hw_info_t *local_hw_info;
+ pcnet_dev_t *info = PRIV(dev);
+ int priv = try;
+ int ret;
+
+ ret = pcmcia_loop_config(link, pcnet_confcheck, &priv);
+ if (ret) {
+ dev_warn(&link->dev, "no useable port range found\n");
+ return NULL;
+ }
+ *has_shmem = (priv & 0x10);
+
+ if (!link->irq)
+ return NULL;
+
+ if (resource_size(link->resource[1]) == 8) {
+ link->conf.Attributes |= CONF_ENABLE_SPKR;
+ link->conf.Status = CCSR_AUDIO_ENA;
+ }
+ if ((link->manf_id == MANFID_IBM) &&
+ (link->card_id == PRODID_IBM_HOME_AND_AWAY))
+ link->conf.ConfigIndex |= 0x10;
+
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ return NULL;
+
+ dev->irq = link->irq;
+ dev->base_addr = link->resource[0]->start;
+
+ if (info->flags & HAS_MISC_REG) {
+ if ((if_port == 1) || (if_port == 2))
+ dev->if_port = if_port;
+ else
+ dev_notice(&link->dev, "invalid if_port requested\n");
+ } else
+ dev->if_port = 0;
+
+ if ((link->conf.ConfigBase == 0x03c0) &&
+ (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) {
+ dev_info(&link->dev,
+ "this is an AX88190 card - use axnet_cs instead.\n");
+ return NULL;
+ }
+
+ local_hw_info = get_hwinfo(link);
+ if (!local_hw_info)
+ local_hw_info = get_prom(link);
+ if (!local_hw_info)
+ local_hw_info = get_dl10019(link);
+ if (!local_hw_info)
+ local_hw_info = get_ax88190(link);
+ if (!local_hw_info)
+ local_hw_info = get_hwired(link);
+
+ return local_hw_info;
}
static int pcnet_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
pcnet_dev_t *info = PRIV(dev);
- int ret, start_pg, stop_pg, cm_offset;
+ int start_pg, stop_pg, cm_offset;
int has_shmem = 0;
hw_info_t *local_hw_info;
dev_dbg(&link->dev, "pcnet_config\n");
- ret = pcmcia_loop_config(link, pcnet_confcheck, &has_shmem);
- if (ret)
- goto failed;
-
- if (!link->irq)
- goto failed;
-
- if (resource_size(link->resource[1]) == 8) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
- if ((link->manf_id == MANFID_IBM) &&
- (link->card_id == PRODID_IBM_HOME_AND_AWAY))
- link->conf.ConfigIndex |= 0x10;
-
- ret = pcmcia_request_configuration(link, &link->conf);
- if (ret)
- goto failed;
- dev->irq = link->irq;
- dev->base_addr = link->resource[0]->start;
- if (info->flags & HAS_MISC_REG) {
- if ((if_port == 1) || (if_port == 2))
- dev->if_port = if_port;
- else
- printk(KERN_NOTICE "pcnet_cs: invalid if_port requested\n");
- } else {
- dev->if_port = 0;
- }
-
- if ((link->conf.ConfigBase == 0x03c0) &&
- (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) {
- printk(KERN_INFO "pcnet_cs: this is an AX88190 card!\n");
- printk(KERN_INFO "pcnet_cs: use axnet_cs instead.\n");
- goto failed;
- }
-
- local_hw_info = get_hwinfo(link);
- if (local_hw_info == NULL)
- local_hw_info = get_prom(link);
- if (local_hw_info == NULL)
- local_hw_info = get_dl10019(link);
- if (local_hw_info == NULL)
- local_hw_info = get_ax88190(link);
- if (local_hw_info == NULL)
- local_hw_info = get_hwired(link);
-
- if (local_hw_info == NULL) {
- printk(KERN_NOTICE "pcnet_cs: unable to read hardware net"
- " address for io base %#3lx\n", dev->base_addr);
- goto failed;
+ local_hw_info = pcnet_try_config(link, &has_shmem, 0);
+ if (!local_hw_info) {
+ /* check whether forcing io_lines to 16 helps... */
+ pcmcia_disable_device(link);
+ local_hw_info = pcnet_try_config(link, &has_shmem, 1);
+ if (local_hw_info == NULL) {
+ dev_notice(&link->dev, "unable to read hardware net"
+ " address for io base %#3lx\n", dev->base_addr);
+ goto failed;
+ }
}
info->flags = local_hw_info->flags;
OpenPOWER on IntegriCloud