[PATCH] intel ixp2000 network driver

The way the hardware and firmware work is that there is one shared RX
queue and IRQ for a number of different network interfaces.  Due to this,
we would like to process received packets for every interface in the same
NAPI poll handler, so we need a pseudo-device to schedule polling on.

What the driver currently does is that it always schedules polling for
the first network interface in the list, and processes packets for every
interface in the poll handler for that first interface -- however, this
scheme breaks down if the first network interface happens to not be up,
since netif_rx_schedule_prep() checks netif_running().

sky2 apparently has the same issue, and Stephen Hemminger suggested a
way to work around this: create a variant of netif_rx_schedule_prep()
that does not check netif_running().  I implemented this locally and
called it netif_rx_schedule_prep_notup(), and it seems to work well,
but it's something that probably not everyone would be happy with.

The ixp2000 is an ARM CPU with a high-speed network interface in the
CPU itself (full duplex 4Gb/s or 10Gb/s depending on the IXP model.)
The CPU package also contains 8 or 16 (again depending on the IXP
model) 'microengines', which are somewhat primitive but very fast
and efficient processor cores which can be used to offload various
things from the main CPU.

This driver makes the high-speed network interface in the CPU visible
and usable as a regular linux network device.  Currently, it only
supports the Radisys ENP2611 IXP board, but adding support for other
board types should be fairly easy.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

1 files changed, 304 insertions, 0 deletions

diff --git a/drivers/net/ixp2000/pm3386.c b/drivers/net/ixp2000/pm3386.c
new file mode 100644
index 000000000000..cf0681fb1276
--- /dev/null
+++ b/drivers/net/ixp2000/pm3386.c
@@ -0,0 +1,304 @@
+/*
+ * Helper functions for the PM3386s on the Radisys ENP2611
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <asm/io.h>
+
+/*
+ * Read from register 'reg' of PM3386 device 'pm'.
+ */
+static u16 pm3386_reg_read(int pm, int reg)
+{
+	void *_reg;
+	u16 value;
+
+	_reg = (void *)ENP2611_PM3386_0_VIRT_BASE;
+	if (pm == 1)
+		_reg = (void *)ENP2611_PM3386_1_VIRT_BASE;
+
+	value = *((volatile u16 *)(_reg + (reg << 1)));
+
+//	printk(KERN_INFO "pm3386_reg_read(%d, %.3x) = %.8x\n", pm, reg, value);
+
+	return value;
+}
+
+/*
+ * Write to register 'reg' of PM3386 device 'pm', and perform
+ * a readback from the identification register.
+ */
+static void pm3386_reg_write(int pm, int reg, u16 value)
+{
+	void *_reg;
+	u16 dummy;
+
+//	printk(KERN_INFO "pm3386_reg_write(%d, %.3x, %.8x)\n", pm, reg, value);
+
+	_reg = (void *)ENP2611_PM3386_0_VIRT_BASE;
+	if (pm == 1)
+		_reg = (void *)ENP2611_PM3386_1_VIRT_BASE;
+
+	*((volatile u16 *)(_reg + (reg << 1))) = value;
+
+	dummy = *((volatile u16 *)_reg);
+	__asm__ __volatile__("mov %0, %0" : "+r" (dummy));
+}
+
+/*
+ * Read from port 'port' register 'reg', where the registers
+ * for the different ports are 'spacing' registers apart.
+ */
+static u16 pm3386_port_reg_read(int port, int _reg, int spacing)
+{
+	int reg;
+
+	reg = _reg;
+	if (port & 1)
+		reg += spacing;
+
+	return pm3386_reg_read(port >> 1, reg);
+}
+
+/*
+ * Write to port 'port' register 'reg', where the registers
+ * for the different ports are 'spacing' registers apart.
+ */
+static void pm3386_port_reg_write(int port, int _reg, int spacing, u16 value)
+{
+	int reg;
+
+	reg = _reg;
+	if (port & 1)
+		reg += spacing;
+
+	pm3386_reg_write(port >> 1, reg, value);
+}
+
+
+void pm3386_reset(void)
+{
+	/* @@@ Implement me.  */
+}
+
+static u16 swaph(u16 x)
+{
+	return ((x << 8) | (x >> 8)) & 0xffff;
+}
+
+void pm3386_init_port(int port)
+{
+	int pm = port >> 1;
+
+	/*
+	 * Work around ENP2611 bootloader programming MAC address
+	 * in reverse.
+	 */
+	if (pm3386_port_reg_read(port, 0x30a, 0x100) == 0x0000 &&
+	    (pm3386_port_reg_read(port, 0x309, 0x100) & 0xff00) == 0x5000) {
+		u16 temp[3];
+
+		temp[0] = pm3386_port_reg_read(port, 0x308, 0x100);
+		temp[1] = pm3386_port_reg_read(port, 0x309, 0x100);
+		temp[2] = pm3386_port_reg_read(port, 0x30a, 0x100);
+		pm3386_port_reg_write(port, 0x308, 0x100, swaph(temp[2]));
+		pm3386_port_reg_write(port, 0x309, 0x100, swaph(temp[1]));
+		pm3386_port_reg_write(port, 0x30a, 0x100, swaph(temp[0]));
+	}
+
+	/*
+	 * Initialise narrowbanding mode.  See application note 2010486
+	 * for more information.  (@@@ We also need to issue a reset
+	 * when ROOL or DOOL are detected.)
+	 */
+	pm3386_port_reg_write(port, 0x708, 0x10, 0xd055);
+	udelay(500);
+	pm3386_port_reg_write(port, 0x708, 0x10, 0x5055);
+
+	/*
+	 * SPI-3 ingress block.  Set 64 bytes SPI-3 burst size
+	 * towards SPI-3 bridge.
+	 */
+	pm3386_port_reg_write(port, 0x122, 0x20, 0x0002);
+
+	/*
+	 * Enable ingress protocol checking, and soft reset the
+	 * SPI-3 ingress block.
+	 */
+	pm3386_reg_write(pm, 0x103, 0x0003);
+	while (!(pm3386_reg_read(pm, 0x103) & 0x80))
+		;
+
+	/*
+	 * SPI-3 egress block.  Gather 12288 bytes of the current
+	 * packet in the TX fifo before initiating transmit on the
+	 * SERDES interface.  (Prevents TX underflows.)
+	 */
+	pm3386_port_reg_write(port, 0x221, 0x20, 0x0007);
+
+	/*
+	 * Enforce odd parity from the SPI-3 bridge, and soft reset
+	 * the SPI-3 egress block.
+	 */
+	pm3386_reg_write(pm, 0x203, 0x000d & ~(4 << (port & 1)));
+	while ((pm3386_reg_read(pm, 0x203) & 0x000c) != 0x000c)
+		;
+
+	/*
+	 * EGMAC block.  Set this channels to reject long preambles,
+	 * not send or transmit PAUSE frames, enable preamble checking,
+	 * disable frame length checking, enable FCS appending, enable
+	 * TX frame padding.
+	 */
+	pm3386_port_reg_write(port, 0x302, 0x100, 0x0113);
+
+	/*
+	 * Soft reset the EGMAC block.
+	 */
+	pm3386_port_reg_write(port, 0x301, 0x100, 0x8000);
+	udelay(10);
+	pm3386_port_reg_write(port, 0x301, 0x100, 0x0000);
+	udelay(10);
+
+	/*
+	 * Auto-sense autonegotiation status.
+	 */
+	pm3386_port_reg_write(port, 0x306, 0x100, 0x0100);
+
+	/*
+	 * Allow reception of jumbo frames.
+	 */
+	pm3386_port_reg_write(port, 0x310, 0x100, 9018);
+
+	/*
+	 * Allow transmission of jumbo frames.
+	 */
+	pm3386_port_reg_write(port, 0x336, 0x100, 9018);
+
+	/* @@@ Should set 0x337/0x437 (RX forwarding threshold.)  */
+
+	/*
+	 * Set autonegotiation parameters to 'no PAUSE, full duplex.'
+	 */
+	pm3386_port_reg_write(port, 0x31c, 0x100, 0x0020);
+	udelay(10);
+
+	/*
+	 * Enable and restart autonegotiation.
+	 */
+	pm3386_port_reg_write(port, 0x318, 0x100, 0x0003);
+	udelay(1000);
+	pm3386_port_reg_write(port, 0x318, 0x100, 0x0002);
+	udelay(10);
+}
+
+void pm3386_get_mac(int port, u8 *mac)
+{
+	u16 temp;
+
+	temp = pm3386_port_reg_read(port, 0x308, 0x100);
+	mac[0] = temp & 0xff;
+	mac[1] = (temp >> 8) & 0xff;
+
+	temp = pm3386_port_reg_read(port, 0x309, 0x100);
+	mac[2] = temp & 0xff;
+	mac[3] = (temp >> 8) & 0xff;
+
+	temp = pm3386_port_reg_read(port, 0x30a, 0x100);
+	mac[4] = temp & 0xff;
+	mac[5] = (temp >> 8) & 0xff;
+}
+
+static u32 pm3386_get_stat(int port, u16 base)
+{
+	u32 value;
+
+	value = pm3386_port_reg_read(port, base, 0x100);
+	value |= pm3386_port_reg_read(port, base + 1, 0x100) << 16;
+
+	return value;
+}
+
+void pm3386_get_stats(int port, struct net_device_stats *stats)
+{
+	/*
+	 * Snapshot statistics counters.
+	 */
+	pm3386_port_reg_write(port, 0x500, 0x100, 0x0001);
+	while (pm3386_port_reg_read(port, 0x500, 0x100) & 0x0001)
+		;
+
+	memset(stats, 0, sizeof(stats));
+
+	stats->rx_packets = pm3386_get_stat(port, 0x510);
+	stats->tx_packets = pm3386_get_stat(port, 0x590);
+	stats->rx_bytes = pm3386_get_stat(port, 0x514);
+	stats->tx_bytes = pm3386_get_stat(port, 0x594);
+	/* @@@ Add other stats.  */
+}
+
+int pm3386_is_link_up(int port)
+{
+	u16 temp;
+
+	temp = pm3386_port_reg_read(port, 0x31a, 0x100);
+	temp = pm3386_port_reg_read(port, 0x31a, 0x100);
+
+	return !!(temp & 0x0002);
+}
+
+void pm3386_enable_rx(int port)
+{
+	u16 temp;
+
+	temp = pm3386_port_reg_read(port, 0x303, 0x100);
+	temp |= 0x1000;
+	pm3386_port_reg_write(port, 0x303, 0x100, temp);
+
+	udelay(10);
+}
+
+void pm3386_disable_rx(int port)
+{
+	u16 temp;
+
+	temp = pm3386_port_reg_read(port, 0x303, 0x100);
+	temp &= 0xefff;
+	pm3386_port_reg_write(port, 0x303, 0x100, temp);
+
+	udelay(10);
+}
+
+void pm3386_enable_tx(int port)
+{
+	u16 temp;
+
+	temp = pm3386_port_reg_read(port, 0x303, 0x100);
+	temp |= 0x4000;
+	pm3386_port_reg_write(port, 0x303, 0x100, temp);
+
+	udelay(10);
+}
+
+void pm3386_disable_tx(int port)
+{
+	u16 temp;
+
+	temp = pm3386_port_reg_read(port, 0x303, 0x100);
+	temp &= 0xbfff;
+	pm3386_port_reg_write(port, 0x303, 0x100, temp);
+
+	udelay(10);
+}
+
+MODULE_LICENSE("GPL");