xscale: Move the Intel XScale IXP drivers

Move the Intel XScale IXP drivers into drivers/net/ethernet/xscale/
and make the necessary Kconfig and Makefile changes.

CC: Krzysztof Halasa <khc@pm.waw.pl>
CC: Lennert Buytenhek <kernel@wantstofly.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 232 deletions

diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c
deleted file mode 100644
index 34a6cfd17930..000000000000
--- a/drivers/net/ixp2000/enp2611.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * IXP2400 MSF network device driver for the Radisys ENP2611
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/init.h>
-#include <linux/moduleparam.h>
-#include <asm/hardware/uengine.h>
-#include <asm/mach-types.h>
-#include <asm/io.h>
-#include "ixpdev.h"
-#include "caleb.h"
-#include "ixp2400-msf.h"
-#include "pm3386.h"
-
-/***********************************************************************
- * The Radisys ENP2611 is a PCI form factor board with three SFP GBIC
- * slots, connected via two PMC/Sierra 3386s and an SPI-3 bridge FPGA
- * to the IXP2400.
- *
- *                +-------------+
- * SFP GBIC #0 ---+             |       +---------+
- *                |  PM3386 #0  +-------+         |
- * SFP GBIC #1 ---+             |       | "Caleb" |         +---------+
- *                +-------------+       |         |         |         |
- *                                      | SPI-3   +---------+ IXP2400 |
- *                +-------------+       | bridge  |         |         |
- * SFP GBIC #2 ---+             |       | FPGA    |         +---------+
- *                |  PM3386 #1  +-------+         |
- *                |             |       +---------+
- *                +-------------+
- *              ^                   ^                  ^
- *              | 1.25Gbaud         | 104MHz           | 104MHz
- *              | SERDES ea.        | SPI-3 ea.        | SPI-3
- *
- ***********************************************************************/
-static struct ixp2400_msf_parameters enp2611_msf_parameters =
-{
-	.rx_mode =		IXP2400_RX_MODE_UTOPIA_POS |
-				IXP2400_RX_MODE_1x32 |
-				IXP2400_RX_MODE_MPHY |
-				IXP2400_RX_MODE_MPHY_32 |
-				IXP2400_RX_MODE_MPHY_POLLED_STATUS |
-				IXP2400_RX_MODE_MPHY_LEVEL3 |
-				IXP2400_RX_MODE_RBUF_SIZE_64,
-
-	.rxclk01_multiplier =	IXP2400_PLL_MULTIPLIER_16,
-
-	.rx_poll_ports =	3,
-
-	.rx_channel_mode = {
-		IXP2400_PORT_RX_MODE_MASTER |
-		IXP2400_PORT_RX_MODE_POS_PHY |
-		IXP2400_PORT_RX_MODE_POS_PHY_L3 |
-		IXP2400_PORT_RX_MODE_ODD_PARITY |
-		IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
-
-		IXP2400_PORT_RX_MODE_MASTER |
-		IXP2400_PORT_RX_MODE_POS_PHY |
-		IXP2400_PORT_RX_MODE_POS_PHY_L3 |
-		IXP2400_PORT_RX_MODE_ODD_PARITY |
-		IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
-
-		IXP2400_PORT_RX_MODE_MASTER |
-		IXP2400_PORT_RX_MODE_POS_PHY |
-		IXP2400_PORT_RX_MODE_POS_PHY_L3 |
-		IXP2400_PORT_RX_MODE_ODD_PARITY |
-		IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
-
-		IXP2400_PORT_RX_MODE_MASTER |
-		IXP2400_PORT_RX_MODE_POS_PHY |
-		IXP2400_PORT_RX_MODE_POS_PHY_L3 |
-		IXP2400_PORT_RX_MODE_ODD_PARITY |
-		IXP2400_PORT_RX_MODE_2_CYCLE_DECODE
-	},
-
-	.tx_mode =		IXP2400_TX_MODE_UTOPIA_POS |
-				IXP2400_TX_MODE_1x32 |
-				IXP2400_TX_MODE_MPHY |
-				IXP2400_TX_MODE_MPHY_32 |
-				IXP2400_TX_MODE_MPHY_POLLED_STATUS |
-				IXP2400_TX_MODE_MPHY_LEVEL3 |
-				IXP2400_TX_MODE_TBUF_SIZE_64,
-
-	.txclk01_multiplier =	IXP2400_PLL_MULTIPLIER_16,
-
-	.tx_poll_ports =	3,
-
-	.tx_channel_mode = {
-		IXP2400_PORT_TX_MODE_MASTER |
-		IXP2400_PORT_TX_MODE_POS_PHY |
-		IXP2400_PORT_TX_MODE_ODD_PARITY |
-		IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
-
-		IXP2400_PORT_TX_MODE_MASTER |
-		IXP2400_PORT_TX_MODE_POS_PHY |
-		IXP2400_PORT_TX_MODE_ODD_PARITY |
-		IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
-
-		IXP2400_PORT_TX_MODE_MASTER |
-		IXP2400_PORT_TX_MODE_POS_PHY |
-		IXP2400_PORT_TX_MODE_ODD_PARITY |
-		IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
-
-		IXP2400_PORT_TX_MODE_MASTER |
-		IXP2400_PORT_TX_MODE_POS_PHY |
-		IXP2400_PORT_TX_MODE_ODD_PARITY |
-		IXP2400_PORT_TX_MODE_2_CYCLE_DECODE
-	}
-};
-
-static struct net_device *nds[3];
-static struct timer_list link_check_timer;
-
-/* @@@ Poll the SFP moddef0 line too.  */
-/* @@@ Try to use the pm3386 DOOL interrupt as well.  */
-static void enp2611_check_link_status(unsigned long __dummy)
-{
-	int i;
-
-	for (i = 0; i < 3; i++) {
-		struct net_device *dev;
-		int status;
-
-		dev = nds[i];
-		if (dev == NULL)
-			continue;
-
-		status = pm3386_is_link_up(i);
-		if (status && !netif_carrier_ok(dev)) {
-			/* @@@ Should report autonegotiation status.  */
-			printk(KERN_INFO "%s: NIC Link is Up\n", dev->name);
-
-			pm3386_enable_tx(i);
-			caleb_enable_tx(i);
-			netif_carrier_on(dev);
-		} else if (!status && netif_carrier_ok(dev)) {
-			printk(KERN_INFO "%s: NIC Link is Down\n", dev->name);
-
-			netif_carrier_off(dev);
-			caleb_disable_tx(i);
-			pm3386_disable_tx(i);
-		}
-	}
-
-	link_check_timer.expires = jiffies + HZ / 10;
-	add_timer(&link_check_timer);
-}
-
-static void enp2611_set_port_admin_status(int port, int up)
-{
-	if (up) {
-		caleb_enable_rx(port);
-
-		pm3386_set_carrier(port, 1);
-		pm3386_enable_rx(port);
-	} else {
-		caleb_disable_tx(port);
-		pm3386_disable_tx(port);
-		/* @@@ Flush out pending packets.  */
-		pm3386_set_carrier(port, 0);
-
-		pm3386_disable_rx(port);
-		caleb_disable_rx(port);
-	}
-}
-
-static int __init enp2611_init_module(void)
-{ 
-	int ports;
-	int i;
-
-	if (!machine_is_enp2611())
-		return -ENODEV;
-
-	caleb_reset();
-	pm3386_reset();
-
-	ports = pm3386_port_count();
-	for (i = 0; i < ports; i++) {
-		nds[i] = ixpdev_alloc(i, sizeof(struct ixpdev_priv));
-		if (nds[i] == NULL) {
-			while (--i >= 0)
-				free_netdev(nds[i]);
-			return -ENOMEM;
-		}
-
-		pm3386_init_port(i);
-		pm3386_get_mac(i, nds[i]->dev_addr);
-	}
-
-	ixp2400_msf_init(&enp2611_msf_parameters);
-
-	if (ixpdev_init(ports, nds, enp2611_set_port_admin_status)) {
-		for (i = 0; i < ports; i++)
-			if (nds[i])
-				free_netdev(nds[i]);
-		return -EINVAL;
-	}
-
-	init_timer(&link_check_timer);
-	link_check_timer.function = enp2611_check_link_status;
-	link_check_timer.expires = jiffies;
-	add_timer(&link_check_timer);
-
-	return 0;
-}
-
-static void __exit enp2611_cleanup_module(void)
-{
-	int i;
-
-	del_timer_sync(&link_check_timer);
-
-	ixpdev_deinit();
-	for (i = 0; i < 3; i++)
-		free_netdev(nds[i]);
-}
-
-module_init(enp2611_init_module);
-module_exit(enp2611_cleanup_module);
-MODULE_LICENSE("GPL");