summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
diff options
context:
space:
mode:
authorStefan Wahren <stefan.wahren@i2se.com>2014-03-12 11:28:19 +0100
committerDavid S. Miller <davem@davemloft.net>2014-03-13 15:46:20 -0400
commit84fe61821e4ebab6322eeae3f3c27f77f0031978 (patch)
tree394349b487a8e228c89adcef0b4877cfaeeb8650 /drivers/net/ethernet
parentfb00bc2e6cd2046282ba4b03f4fe682aee70b2f8 (diff)
downloadblackbird-op-linux-84fe61821e4ebab6322eeae3f3c27f77f0031978.tar.gz
blackbird-op-linux-84fe61821e4ebab6322eeae3f3c27f77f0031978.zip
eth: fec: Fix lost promiscuous mode after reconnecting cable
If the Freescale fec is in promiscuous mode and network cable is reconnected then the promiscuous mode get lost. The problem is caused by a too soon call of set_multicast_list to re-enable promisc mode. The FEC_R_CNTRL register changes are overwritten by fec_restart. This patch fixes this by moving the call behind the init of FEC_R_CNTRL register in fec_restart. Successful tested on a i.MX28 board. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet')
-rw-r--r--drivers/net/ethernet/freescale/fec_main.c14
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 479a7cba45c0..03a351300013 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -528,13 +528,6 @@ fec_restart(struct net_device *ndev, int duplex)
/* Clear any outstanding interrupt. */
writel(0xffc00000, fep->hwp + FEC_IEVENT);
- /* Setup multicast filter. */
- set_multicast_list(ndev);
-#ifndef CONFIG_M5272
- writel(0, fep->hwp + FEC_HASH_TABLE_HIGH);
- writel(0, fep->hwp + FEC_HASH_TABLE_LOW);
-#endif
-
/* Set maximum receive buffer size. */
writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE);
@@ -655,6 +648,13 @@ fec_restart(struct net_device *ndev, int duplex)
writel(rcntl, fep->hwp + FEC_R_CNTRL);
+ /* Setup multicast filter. */
+ set_multicast_list(ndev);
+#ifndef CONFIG_M5272
+ writel(0, fep->hwp + FEC_HASH_TABLE_HIGH);
+ writel(0, fep->hwp + FEC_HASH_TABLE_LOW);
+#endif
+
if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
/* enable ENET endian swap */
ecntl |= (1 << 8);
OpenPOWER on IntegriCloud